Dbua upgrading multiple db at the same time

hi
in rac environment is it possible to run multiple dbua to upgrade 2 db's at the same time ? they both share the same rac db home.. i dnt think if its possible to run both from nodea but what if i run one from nodea and one from nodeb? will that work ?

in rac environment is it possible to run multiple dbua to upgrade 2 db's at the same time ?Yes you can execute two binaries at the same time.
they both share the same rac db home.. DBUA will upgrade database not ORACLE_HOME so if you are going to upgrade you will stop the database.
i dnt think if its possible to run both from nodea but what if i run one from nodea and one from nodeb?It will happen because before upgrading you need to shutdown, so it is possible
will that work ?Yes but very careful .. :)

Similar Messages

Can you use sync on multiple computers at the same time? ie have someone else logged into your firefox account for you whilst you are also logged in

I am trying to sign up to something but there is only a short window so was going to ask a friend to sign in at the same time using my account to try to sign up (with my password being saved into my firefox account)

Hi. Yes, you can use Sync on multiple devices at the same time. I use it to keep my bookmarks in sync across my desktop and Android versions of Firefox.

Is there a way to delete multiple pictures at the same time from the iphone4s?

Is there a way to deleter multiple pictures at the same time, from my iphone4s? I know how to delete one at a time. Thanks

Open your Photos App > Camera Roll > At the top right corner you will see a rectangle with a right arrow, select that. Now you can select as many photos as you want and you can hit the red Delete button on the bottom right.

CRVS2010 - open multiple rpts at the same time, like sheets in a xls file ?

Hi all,
is that possible to open multiple reports at the same time, like sheets in a excell file ?
Is that possible create tabs beside the MainReport tab ? or include reports in the Group Tree ? how can I do it ?
The application is in asp.net with VS2010 and CR2010.
The reports used to be in excell with three sheets and now we are migrating them to crystal reports, how can I create the report with those three sheets ?
thanks !
Subject modified as per the sticky post at the top of this forum; [Crystal Reports for Visual Studio 2010 Beta - read before posting|Crystal Reports for Visual Studio 2010 Beta - read before posting;
Edited by: Ludek Uher on Aug 31, 2010 7:33 AM

I'll make the suggestion to the Program Management group.
You may want to do a post to the [Crystal Reports Design|SAP Crystal Reports; forum and ask them how they's fake that sort of a requirement. E.g.; there may be some way to make this report look the way you want, but it will be best to ask the experts. Don't mention CRVS2010 as they don't support it and most likely you will not get an answer.
Ludek

Can you opening multiple albums at the same time in Photo (not iPhoto)?

When converting the iPhoto library to Photo most of the albums that were in place in iPhoto converted to albums in Photo . . . .but not all. Some were retained as events mainly those that were folders within an album. In order to move them to the right album I would like to have multiple albums open at the same time (side by side) so that I can make sure not to duplicate photos or move them to the wrong spot.
I cant see how to do this, it seems that I can need to open one album and check phots and then close to look within and other and rely on memory. There must be a more efficient and accurate way to do this?

All of the events in iPhoto were converted to albums and are located in the Folder titled iPhoto Event in the sidebar of Photos.
You can't open multiple albums at the same time. You can create a smart album that will do essentially the same thing with the following criteria:
Album is "A"
Album is "B".
The smart album will display all of the photos in those two albums.

How to support multiple users at the same time?

Hi all,
I have a Labview software which controls a analyzer via GPIB connector. When user A is using the software, user B has to wait until A is done. But actually, the analyzer is not very busy, when user A is using the software.
I want user A, B, C and D can use the software at the same time. just like we can open Multiple websites at the same time.
How can I program the software, so that the software can be open multiple times? Do you have any example?
Thanks a lot.
Steven
Solved!
Go to Solution.

Are all the users going to be measuring the exact same thing from the same instrument?
It would be possible to write a separate instrument server application that would handle all the direct interactions with the instrument. When one of the users needed to access the instrument, they would gain access to it through this server.
The big, Big, BIG caveat is that each interaction with the instrument would need to be atomic. In other words each access would need to configure the instrument, initiate the reading, report the results, and then reset the instrument back to some known default value.
As Dennis said, not a trivial process, but probably do-able...
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

In Elements 7.0, how can I delete multiple photos at the same time?

In Adobe Photoshop Elements 7.0, how can I delete multiple photos at the same time? Please be a little specific so I can follow your instructions as I'm not real smart at computers; I'm an intermediate user. Thank you.

Shift-click the photos or Ctrl-click them to select them, then right-click one of them and choose Delete from Catalog. They will all go together.

How do you apply a master page to multiple documents at the same time?

How do you apply a master page to multiple documents at the same time?

Hi friends,
Thank you for trying to help me out.
Let me explain it a bit to remove the ambiguity.
I have 10 documents nested under a book. Each of these documents have 'n' number of pages. I want to apply my custom made master page "First" to the first page of all these 10 documents in one go. The remaining pages of the documents have to be in default "Right" master page format. How will I do it?
I tried selecting all the documents and importing the formats from another document with the custom made "First" master page. The master page format is getting imported but the first page of all the documents still remain with the default "Right" master page format.
I think now my question is more clear...

WDS 2012 R2 - Cannot PXE multiple clients at the same time

Hello All,
This is my first post on here so I apologize if this is the wrong place. I work for a school district and we are implementing WDS 2012 R2. We've been extremely satisfied with the speeds and ease of use through unattend files. However, for
the past month I've been looking for a possible answer to a problem that has plagued us from day one of implementation.
So here's the problem:
I have a stand alone WDS server which is not a domain controller and is not our DHCP server. I have IP helpers and broadcast forwarders setup on the network. As well as option 66 and 67 in DHCP. So far so good right!
Well that's partially right. When we boot one client at a time to the WDS server. Everything works as intended. We can TFTP the necessary files from the WDS server. Everything boots up and we're off and running.
However, if we boot up two or more clients at the same time. The WDS server never responds to the traffic. The clients get their DHCP information. They start the referral and download from the WDS server, but get no response. I'm
really hoping that someone on here would have some insight of something I can try. I've about exhausted my list of peers and contacts. They're all stumped as well and were smart enough to stay with 2008 WDS.
I would prefer to stick with 2012 R2 since it's setup and working for the most part. With only this one hiccup.
Thanks in advance for any guidance!

Hello Daniel,
I appreciate the reply and apologize for taking so long to get back to this. Things have been a little hectic over here.
I have tried everything on this forum and I am still unsuccessful in PXE booting multiple clients at the same time.
Multicast is enabled on the server, and it works for the clients. However, as stated in the original post. I cannot boot multiple machines at the same time. I can start them from the image selection screen around the same time though. So,
that appears to be working fine.

Lightroom CC issues with multiple export at the same time

Back before Lightroom updated to the CC version, I was able to use export presets to send 4 different versions of the photos I'm working on at the same time (A Full Size for client at certain size, full size for myself, web-sized with watermark and a thumbnail). Since updating to the CC version, I'm only able to start the export process on two of these versions before the system simply becomes crippled and I cannot even navigate through Lightroom without it chugging along.
For reference, I'm running a 2014 rMBP with 16GB of RAM, LR is the only app open at the time and it's showing that I have roughly 6GB of RAM free when attempting this export.
TL;DR: LR5 worked wiht multiple exports at the same time, but LRCC now chugs after 2 exports are started

Re: "Selecting video in Messages, now starts Face time for video. Face time is one to one only."
Apple "Messages" supports two different types of video conferencing. It's become more than a little confusing. If you (or the person on the other end) ONLY have accounts set up for Apple's "iMessage" service (associated with your Apple ID and "iCloud") you may see the video symbol, but when you click on it you will be connected via FaceTime which is limited a 1-to-1 video conference.
However, if you have set up an AIM account in Messages (you may already have an AIM account ID if you once used iChat for video, audio and screensharing) and the person at the other end also has an AIM account you will be connected via AIM and will be able to do screen sharing and multi-person video conferences just like the old iChat, i.e. you'll have iChat Theater features, up to 4-way conferencing, etc.
It can get very confusing if, for example, you've signed up for AIM using a .me or .cloud email address. But once you have it set up and learn to recognise the way Messages switches between AIM and iMessage all the old iChat features work just fine in Messages.

Run invoke-command on multiple machines at the same time

Hey all so I read that if I store my New-pssession in a variable then used that in my invoke-command it would run all computers at the same time.
$a = Get-Content "C:\Users\cody-horton\Desktop\list.txt"
$session
for($i=0;$i -lt $a.Length;$i++){
if(!(Test-Connection -Cn $a[$i] -BufferSize 16 -Count 1 -ea 0 -quiet)){
Write-Host $a[$i] -foregroundcolor red
else{
$session = New-PSSession $a[$i]
Invoke-Command -Session $session -FilePath "\\My computer\C`$\Users\public\Documents\zip folder.ps1"
What exactly am I doing wrong I just need to run this script on multiple machines at the same time.
Thanks.
Edit: Also what would be the best way to close all the sessions thanks.

Hi there,
So what I think you are doing wrong here is that you are overwriting the value in $Session everytime you executed code inside for loop. try the below:
$a = Get-Content "C:\Users\cody-horton\Desktop\list.txt"
$session = @() #define this as an array
for($i=0;$i -lt $a.Length;$i++){
if(!(Test-Connection -Cn $a[$i] -BufferSize 16 -Count 1 -ea 0 -quiet)){
Write-Host $a[$i] -foregroundcolor red
else{
$session += New-PSSession $a[$i] #add the new session to the array, at the end it will be a collection of sessions
Invoke-Command -Session $session -FilePath "\\My computer\C`$\Users\public\Documents\zip folder.ps1" #I think the above one won't work..first you need to copy the script locally on the machine and then execute it#Why this won't work because of Second-Hop Authentication
Have put comments where I edited your code.
Hope this helps
Knowledge is Power{Shell}. http://dexterposh.blogspot.com/

Accessing multiple portals at the same time?

Is it possible to access multiple portals at the same time?
For example, what I want to achieve is different properties (layout,
portlets, look & feel) for different groups of users accessing the same
portal. The Associated Groups part on the Portal admin page is not
fulfilling our requirements. So we decided to have different portals for
different groups of users, all working through one portal, and accessing
their custom portals. Is this achievable?
What we are thinking is: put the common functionality in the repository
portal directory, and the custom portlets/jsps in the group-specific portal
directories. This way we can customize portal behavior for different groups
of users. Is this achievable?
Thanks.
Amit

You have to user respective DRILL commands present in WAD to configure the drill operations on multiple characteristics...

Can I run the currency translation for multiple years at the same time?

Dear Friends,
I set up currency translation on our BPC NW 7.0 system and it is working fine ONLY if I run it for any one year at a time. But if I select multiple years in the data package (FX Restatment) selection it only calculates for the first year in that selection.
say if I run the data package for years: 2009, 2010, 2011, 2012, it only performs currency translation for the year 2009.
Can I run the currency translation for multiple years at the same time ?
Note: The year is determined from the YEAR property of the "Time" dimension
appreciate any inputs,
thanks

You can run currency translation for multiple years.
I think the problem it is actually related to how you are sending the parameter to currency translation script.
Just review the script logic log and you will see with what parameters was called currency translation FXTrans.
My expectation is that actually the script is called just with first year and that's the problem.
Log of script logic you can find it into:
C:\BPC|DATA\Webfolder\YourAppset\YourApplication\Private Publications\Users used to run logic\Temp
Regards
Sorin Radulescu

How to display multiple reports at the same time

Hi,
I'm trying to display multiple reports at the same time, each one in separates tabs or windows using Forms 11g 11.1.1.6
I have a button which has a call to a procedure which makes use of rp2rro library to show the specific reports, for example:
call_report('report1');
call_report('report2');
call_report('report3');
call_report('report4');
The main problem is that, just the last report is been displayed.
Is there some way to display report1, report2 etc in separate tabs or windows ??
Regards
Carlos

You shouldn't have a problem calling different reports at once. As long as you're using Forms 11g they show up in different windows.
The question is how you are calling the report.
Here is how I manipulate it.
After I pass parameters with the ADD_PARAMETER built-in I set some key values (destype, desformat, desname) with the RP2RRO's procedures.
Finally calling RP2RRO.RP2RRO_RUN_PRODUCT and then WEB.SHOW_DOCUMENT passing the correct procedure parameters the report comes up in a window. If you repeat the above changing the appropriate variables (the report_name in the RP2RRO_RUN_PRODUCT and so on) you can get multiple reports in different windows.

Can I view the same pdf on multiple iPads at the same time with 1 iPad operating as the master (controlling page turns etc)?

Would like to use 4nr iPads as an autocue system. Can I view the same pdf on multiple iPads at the same time with 1 iPad operating as the master (controlling page turns etc) and the others operating as slaves? Can this be done without the use of 3G or a remote Wifi hub? I would appreciate your input.................

Open the document in Acrobat Reader and use the menu Window > New Window.

Dbua upgrading multiple db at the same time

Similar Messages

Maybe you are looking for