Dbx for Forte Developer 6 on SunOS 5.10 suddenly stopped working
I know this is the forum for Sun Studio but it was the closest I could find to answer the question. If there is one for Forte Developer, please point me to that.
The problem I have is that last week dbx suddenly stopped working for me. I would try to lauch it and it would just hang and be unable to be killed with kill -9.
I've asked my sys admins to look into the issue but haven't gotten a response yet so I thought I'd try here.
I have some truss output but I can't post it here because of length issues. If somebody wants it, I can send it to them.
Thanks,
Madison
Forte Developer 6 is part of the Sun Studio family, so you have found the right forum. :-)
FD6 is End Of Service Life, and no support has been available for it since 2006.
In addition, it is not supported for use on Solaris 10. If it was working previously, it was only by accident.
You should get Sun Studio 12, the current release, or wait a few weeks and get Sun Studio 12 udpate 1. It is free for all uses, does not use a runtime license (only a license agreement), supports modern hardware and operating systems, compiles faster, produces code that runs faster, has much better support for C++ (and supports C99), has a greatly improved debugger and has other new development tools.
You can get the current Sun Studio here:
[http://developers.sun.com/sunstudio/]
... and the current patches for it here:
[http://developers.sun.com/sunstudio/downloads/patches/index.jsp]
The Support Matrix shows what OS versions are supported by the various Sun Studio releases, and the lifetime of each.
[http://developers.sun.com/sunstudio/support/matrix/index.jsp]
Similar Messages
-
i was watching tv and pulled my ipod out and it wouldn't turn on i tried plugging it in connecting it to itunes but nothing worked
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
my usb that i have been using on my computer for a while suddenly stopped working, but is still glowing and letting me know that it is connected, but not showing up in disk utility
Either the physical drive or the enclosure electronics has failed. The light you are seeing is powered by the USB connection, the power, electricity, all USB ports put out. That doesn't mean the actual physical hard drive or the USB to SATA bus electronics are working properly. If it doesn't show in Disk Utility then it is DEAD.
Most of the time it is the enclosures electronics that fail. Removing the physical drive from the enclosure and put it in another enclosure or using a SATA to USB adapter, one that has it's own AC power supply, might allow you to get the files off the drive. -
The issue: Outlook to iPhone sync failure – Sync suddenly stopped working for calendar events but continued for contacts and notes. Finally Fixed!!!
SUPPORT TEAM – PLEASE SEE THIS – Complete explanation of cause and correction steps.
The cause: It is now clear what caused this problem. For years I had several “all-day” events in my Outlook calendar (birthdays, anniversaries, etc.). In May 2012 I decided to make some of them one hour events so I could add alerts to remind me of the event. I did this by dragging them in Outlook to the time I wanted and expanding them to the time slot desired and then adding the alarm.
The symptom: Syncing stopped working for the calendar but continued working for contacts and notes. I didn’t realize sync was failing until months later when I missed two very important phone calls, so when I noticed it the cause was not obvious.
The failed attempts: I’m head of a software firm and my calendar sync is a crucial to my business life so I took this on with a vengeance. From a quick look at events in Outlook and the iPhone I could see that the problem started in May 2012. Events before May were in both Outlook and the iPhone but events after May were only one or the other. Unfortunately I had changed several other things at the same time relating to other events so again the cause was not obvious. MANY calls with AppleCare proved them incompetent so my internal IT guys assisted trying many things. We tried a huge number of calendar changes and several versions of iTunes, iPhone OS and Office as well as both iPhone 4 and 5, all without success.
The fix: After 18 months of frustration, MANY hundreds of $ expense and MANY hours of wasted time I saw a blog that had a calendar sync problem and it indicated all day events were related. I changed the display of the Outlook calendar to the list view, added columns so I could see “all day” event check marks as well as times of events, sorted on the “all day” event column to move them to the top, and for all events that were “all day” events AND had a start and end time, I removed recurrence and then added the annual recurrence back…
After I fixed all events that had BOTH “all day” set and had a start/end time, I tried another sync. It synced for the first time in 18 months!
Problem occurred May 2012 – fixed Nov 2013Hi, to remove dummy '_ModGrp' entries, rather than crashing the 'Suppr' key on your keyboard, you can use this basic VBA macro (launched for instance from Excel).
It will recursively remove all '_ModGrp...' folders
Sub RemoveFolders_Click()
Dim oOutlook As Outlook.Application
Set oOutlook = New Outlook.Application
Set objNameSpace = oOutlook.GetNamespace("MAPI")
Call CleanFolders(objNameSpace.Folders)
End Sub
Sub CleanFolders(objFolders As Outlook.Folders)
For i = objFolders.Count To 1 Step -1
If Left(objFolders(i).Name, 7) = "_ModGrp" Then
objFolders.Remove( i )
Else
If Not objFolders(i).Folders Is Nothing Then
Call CleanFolders(objFolders(i).Folders)
End If
End If
Next i
End Sub -
My iTunes suddenly stopped working and doesn't recognize any of my devices and gives me a AMD error. I've tried several times to uninstall all Apple programs and reinstall to no avail. I'm running windows 7 on a Dell laptop. It worked fine for years then I decided to update my iPhone 4S and it didn't recognize it or any other iPod or iPad.
Can someone please help ?I am having all sorts of problems with 9.1.1.Crashes and not only iTunes but I have to restart all the time.
GET TO WORK APPLE !!!! -
Ethernet suddenly stopped working for no apparent reason
My late 2011 MBP is usually functioning as a desktop with external display and keyboard/trackpad, so I have it connected via ethernet when it's on the desk. However, my connection suddenly stopped working for no apparent reason.......... BUT clearly not a router problem as there's no problem with the wifi connection. System Preferences > Network > Ethernet is telling me:
Status: Connected. Ethernet has a self-assigned IP address and will not be able to connect to the internet.
Dunno how this happened, as to my knowledge I didn't actually do anything to cause this problem, just randomly stopped working. Any solutions much appreciated, thanks :-)Please post a screenshot of the Network preference pane. Be careful not to include any private information.
Start a reply to this message. Click the camera icon in the toolbar of the editing window and select the image file to upload it. You can also include text in the reply. -
I have been using my apple tv to access netflix for several months. It suddenly stopped working. When I try to go to netflix from the menu, it says "accessing netflix" but never does. I can access you tube just fine, but just can't get to netflix. Any ideas. I have unplugged everything and waited but nothing helped.
Update software. If that doesn't work try resetting. Mine started working after the update.
-
The nearest service center is 2 hours from my house and my computer isn't under warranty anymore, so I need alternative options. I'm just frustrated that my disc drive was totally fine until AFTER I took it in for service. I just paid a lot of money for a new hard drive from the apple store and now my disc drive has suddenly stopped working correctly. I tried with multiple CD's and DVD's...loading a disc, but my computer would just make a weird loading noise and then eject the discs. Now it has started fighting taking the disc, so I have stopped trying. Is there anyway to fix this problem without taking it in for service again and paying another boat load of money?
Thanks in advance for your help!ShelbyMackenzieLynne,
when you say that your disc drive is damaged, do you mean your MacBook Pro’s hard disk drive, or do you mean its SuperDrive (the CD/DVD drive)?
When you’d updated your MacBook Pro to Mavericks, did the installation succeed, and subsequently freeze up? Or did it freeze up during the Mavericks installation?
Which version of OS X was installed on your MacBook Pro before you’d installed Mavericks?
Are you currently able to boot into the Mavericks recovery partition? To see if you can do so, hold down a Command key and the R key while starting up your MacBook Pro. -
i cannot play my videos or shows on itunes any more. i get the message saying "windows can check online for a solution to the problem" " i tunes has stopped working"
Hi marymike,
The crash signature is simalr to that mentioned in the thread: https://forums.adobe.com/thread/644139
Please try the suggested steps mentioned and check.
Regards,
Rave -
My iphone suddenly stops working and asked for activation required. I did restore it thru itunes but it asks me to turn off "find my iphone". How can i disable "find my iphone" if i can open the iphone itself. please help me.
My iphone 5 suddenly stops working and asked for activation required. I did restore it thru itunes but it asks me to turn off "find my iphone". How can i disable "find my iphone" if i can't open the iphone itself. please help me.
-
I unplugged my iPod Classic without ejecting it first. It played for many hours(about 8) after that but then suddenly stopped working and it has a blackend screen that seems to say paused. Wondering if there is a way to get it to work again.
Hey hughborg25,
I found an article that can help you troubleshoot when an iPod becomes unresponsive or the screen goes black:
iPhone, iPad or iPod touch: Not responding or does not turn on
http://support.apple.com/kb/TS3281
I would go through all the steps listed there, and the issue should be resolved by the end.
Live long and prosper,
David -
hi
Since about 2 weeks ago for no apparent reason, the internet on my iPad suddenly stopped working (when I open Safari, it says: "Safari cannot open the page because it is not connected to the Internet"), even though the Wifi icon in the top left corner still shows full signal. However, I noticed when I went into Wifi settings (Settings>Wifi) that there is no checkmark next to my network name (only the spinning circle icon, as if it's trying to process something). This only happens at home (I can browse the internet while connected to Wifi at university). My other Apple devices (MacBook Pro and iPhone 4S) work perfectly fine at home.
I've tried resetting my router, restarting my iPad, resetting Network Settings on my iPad, and tried following Hynes' instructions on this thread:https://discussions.apple.com/thread/2453187?start=15&tstart=0, but nothing has worked so far (although I have to admit that I found the instructions on that thread somewhat confusing, so there is a chance that I accidentally did not follow them properly).
Could someone please help? It'd be VERY much appreciated. -
Why has my licence key for cs6 suddenly stopped working
I have a valid licence key for CS6 which has been working successfully but suddenly stopped working. I have uninstalled (couldn't deactivate) and reinstalled. Still message says serial number is invalid.
Can anyone help?Same crap seems to happen to many more people.
No response from Adobe so far -
Why would my bluetooth suddenly stop working?
I have had non-Apple Bluetooth devices simply stop communicating after being paired with a device for a year or longer with no apparent reason. The solution was simply to pair the device again.
An explanation is likely to be elusive, resulting only in manufacturers of the devices blaming each other for deficiencies either real or imagined. -
My iPhone has suddenly stopped working. It now says the battery is dying and to charge it. After charging it for over an hour, there is no change. The power won't come on, and I am left with a blank screen advising me to plug my phone into the charger.
Try different USB Cable, try different Charger. Clean iPhone charging port with clean dry toothbrush. If still problem and you have Warranty or AppleCare, make Genius reservation and take iPhone to Apple for resolution. If no coverage, most likely it could be battery or charging port assembly that need replacement.
Maybe you are looking for
-
BMP image not printing on LIPI Dot MAtrix printer
Hello everybody . I am facing a promlem while printing a signature ( bmp image ) in a report . In print preview it is showing coreclty but while printing to LIPI Dot matrix printer model TALLY 2500 that Signature( bmp image ) is not getting printer.
-
Significance of DIR-DIR link direction in DMS object link
How exactly the DIR-DIR link is controlled by direcetion? (Active/Passive/Two way) And why the classification object with class 048 is not provided for DIR-DIR link like other objects? Is there any other way to classify this link?
-
I recently purchased an adapter for my Macbook, from 2006. I am not at all Mac savy and so I need some help on this, I am trying to hook my computer up to my TV. I got an adapter (mini display port to HDMI) that some store on amazon said would be com
-
Not syncing after converting videos for ipod
SOS...I have an elGato eyetv on my mac and I have a few videos captured from it (eyetv) that i intend to put on my iPhone. I read the iPhone manual re videos (chapter 6 ipod) and follewed the instruction on converting so I did the " Converting Videos
-
Alternating shades of blue on TWO laptops...
I have 3 Macs on an AirPort network -- a G5 iMac, an early '08 MacBook Pro and a G4 PowerBook. All have been running 10.5.6 problem-free since the update first came out. Yesterday, performed a restart on the G4 PB and it hung on a screen that alterna