DC-CAMZ 4200 with 1GB SD CARD

I am great fan of Creative....
Recently, bought this DC-CAMZ 4200 from CREATIVE SINGAPORE. This cam is amasing! I understand that the specs mentioned that only up to 52mb can be used. However, since most cameras are using gb with no problem, i recently bought a gb SD card andwas surpriced that it didn't work. I call up the technical hotline this afternoon to ask for help and was told that the max capacity is 52mb. But i asked the cust care if there were any cust feed back if they had successfully used a gb SD, it seems that there were people who are able to use it but he does not know what brand. I thank the Cust care for his help as he tried his best to help.
I jus feel a 52mb is not enough if i were to use the video function.
I hope the technical team could advise me on the alternative way to go about it. Possible a software upgrade or maybe what Particular brand of GB SD is suitable for this cam.
Thanks.
Lee (SINGAPORE)

I am new to this discussion group and have more or less same problem.I have also formatted the memory card and it works fine with an adaptor in the laptop PC.
My Nokia 3109c has mp3 and I have inserted 2gb micro SD card. For some weeks I was able to listen to the songs. Now I am unable to access the memory card and play the player. When I connect the phone to the PC the USB does not recognise data storage. I have music files in the micro SD memory card but whn I play the player it syas 'No music files found'.
Can some one help?

Similar Messages

Memory issues - kernel panics / system freezes with 1Gb Memory Card

I've recently updated my PowerBook OS to 10.4.7 and now more recently 10.4.8.
Prior to this, i had been running a pair of pc2700 memory cards (1x1Gb + 1x 512Mb) bought from crucial technology on 10.3.9 with no problems.
During the upgrade, i experienced complete system lock ups and kernel panics. pulling the 1Gb card resolved the problem.
So i thought it could be duff memory (it happens). I ran hardware checker, both long and short tests, ran memchecker from single user and there was no reported errors although i was still getting crashes.
I returned the memory to crucial and they replaced it and then i went to reinstall memory in the pb.
Once reinstalled, problems re-emerged. Both System profiler and iStat pro show both memory sticks as ok. both are pc2700 DDR.
i tried just the 1 Gb stick in alternate memory slots. with the memory in the lower slot i was getting system freezes, in the top slot i was getting kernel panics.
I've pulled the 1Gb and reverted to 768Mb (512Mb lower (crucial)/ 256MB (apple) upper) and i'm back to normal.
Now what?
As my mac is getting on, i'd like to get as much RAM in it as i can, ideally the 1.5Gb /2Gb which it can support. I'd be suprised if it could be the memory stick being duff (2 duff in a row?), its not a faulty memory slot as system profiler is showing that its full.
Any suggestions? Anything to do with how 10.4.8 handles the memory addressing?
Any help would be appreciated.
PowerBook G4 1Ghz FW800 Mac OS X (10.4.8)

I've had that problem, too. I found out that it was one of my memory modules that were broken.
I'd say pop back in your other memory module, then get out your PowerBook DVD and stick it in Restart your PowerBook while holding down the Option Key on your keyboard until some buttons start to show up on your screen.
Select the Hardware Test one, then click the Arrow button. It'll boot into a utility and you can run a hardware test that includes checking your memory.
If any of your memory is bad, it'll show up like "**ERROR ERROR**" and give you a code.
After you've identified the hardware problem (hopefully just the RAM), then you can go to Crucial's website and fill out an RMA request to have the memory replaced. I'm pretty sure Crucial has a life-time warranty on their memory products.

Nice to see 13" retina but it has only Intel HD Graphics 4000 and does not have NVIDIA GeForce GT 650M with 1GB of GDDR5 memory card. How it will affect the speed, performance and other things compared to 15" retina where NVIDIA GeForce card is available.

Nice to see 13" retina but it has only Intel HD Graphics 4000 and does not have NVIDIA GeForce GT 650M with 1GB of GDDR5 memory card. How it will affect the speed, performance and other things compared to 15" retina where NVIDIA GeForce card is available.

The 15" Retina's will have better performance than any 13" Retina. Not only do the 15" machines have dedicated GPU's, but they also have quad-core processors, whereas the 13" Retina's only have dual-core processors.

Problems with Fujifilm XD cards

Hi everyone!
I recently moved to my first Mac, and have been slowly introducing various peripherals, including my much-loved Fujifilm F30 camera.
While I haven't had many problems with the changeover, the F30 is proving a major stumbling point. Could anyone help me figure out how to negotiate this? I'd be really grateful for any help!
In short, when I use my MBP to delete photos from my XD card, it deletes the files happily. However, when I then insert the same XD card into my camera, it tells me that the card is full, and I cannot take any more photos.
Basically, I think I have compatability issues with the XD card and the MPB.
Longer version:
1) If I connect the F30 camera directly to my MBP, using the provided cable, the computer doesn't recognise it at all. It's not simply a case of not being able to read the files, or copy them across - it doesn't recognised that there is any camera attached. As it happens, my brother has the same camera, so I tried borrowing his cable (in case mine had become faulty). Same problem.
I checked the Fuji website, and I shouldn't need any drivers (I'm using OSX, 10.5.6).
I have never had any trouble with either cable or camera with previous laptop, and it still transfers happily to PCs. In other words, I don't think the camera is faulty. It seemed like some kind of compatability issue, but it was a real mystery.
2) I bought a USB card reader, to see if this would help. This is the beastie I chose:
http://www.amazon.co.uk/Fujifilm-USB-XD-Card-Reader/dp/B00172017W/ref=cmcr_pr_product_tophttp://www.amazon.co.uk/Fujifilm-USB-XD-Card-Reader/dp/B0017201 7W/ref=cm_cr_pr_producttop
At first: triumph! MPB immediately detected the USB, and I could transfer the photos on my XD card easily to my hard-drive. No problem opening or manipulating the files, either - I've been playing with them on Picasa, and all is well with the .jpgs - no corruptions that I can see.
However, when I try to delete the photos from my XD card, something goes awry.
I had transferred the .jpgs in question to my hard-drive, then returned to the USB to delete the original files. This seemed straighforward, and was easily done (with the files moved to trash). But - here's the weirdness - when I insert the XD card to my camera:
a) the files are gone (hurray!)
b) there is no free space.
In other words, having deleted all the files on my 512MB XD card, the camera told me that my XD card was full.
I used the camera's own buttons to review the XD card - i.e. inserted the XD card into the F30, and pressed 'play' to open up the memory. There was nothing there. The camera could not show me any photographs.
So I now have the very strange situation of:
- having no photographs on the XD memory
- being told that the card is full, and I cannot take any more photos.
Help?!
Some more info:
As it happens, I have a second XD card, a 1GB XD. I tried an experiment. I noted how many photographs were left on the card: 63 shots.
I inserted the card into my USB card reader, deleted c.20 photographs already backed up elsewhere, and reinserted the XD card into my camera.
There were still only 63 shots left.
I used the camera's own interface to delete a shot. Remaining space: 64 shots.
In other words, only those files deleted by my Mac are affected.
Why not just use the camera to delete files, then? Well, in the short-term, it doesn't help my poor, borked 512MB XD card. I have no files to delete, and so I can't convince my camera that there is, in fact, room. Any files I deleted seems to be dead space now, with no clear way to retrieve it.
In the long-term, though, this is troubling. Yes, I could buy more XD cards (which aren't cheap, but let's just go with this). I could decide that the 512 MB card is now dead, and the 1GB card somewhat damaged. I could restrict myself to only delete photos on the F30 itself.
However, this is a major disappointment, and very frustrating. I take hundreds of photos, and to go through them one by one, pressing 'delete, ok' for each of them in turn would be hugely time intensive (and draining on battery power, while travelling).
I would dearly love to find a way to do negotiate this - any ideas? It feels like this is a formatting issue, but I don't know for sure. Has anyone else used an F30 with their Mac? Any solutions?

Short answer: Empty the trash with the card reader connected to your Mac.
Longer answer: Deleting files is a two-step process - move the file(s) to the trash, then Empty the trash (Finder > File menu) to free up the space. The 'deleted' files are stored in an invisible folder (called .Trashes) at the root level of the drive/card the files were deleted from. Since the folder is invisible and the pics in it are not in the 'normal' file structure the camera expects, the camera does not see them. If you eject/unmount the drive, those files are not deleted. You must empty the trash with the drive/card connected. One thing you may note - if you have an empty trash can icon in the dock (i.e., you've emptied the trash without the card reader connected), then you connect the card reader with your 'borked' card, the trash can icon will change to a full trash can.
As a side note, I have a couple of Olympus cameras that use xD cards, I have some Olympus-branded and some Fuji-branded cards, up to 2 GB - all the cards work just fine with my MBP; I rarely connect the camera itself (can't even remember the last time) but I have used USB readers and now an ExpressCard reader.

Macbook Pro 15-inch, Late 2011. I'm 100% certain that I bought it with the AMD Radeon HD 6770M graphics processor with 1GB of GDDR5. It says that I have HD Graphics 3000 384 MB. WHY?

I don't understand why my MacBook Pro 15-inch, Late 2011 version is reporting to me that I only have the Intel HD Graphics 3000 384 MB card in it. Why is this? When I bought it I was given the choice to choose between the 500 mb or 1 GB video card and I chose to pay extra in order to get the 1 GB, but now it says that I don't even have that( I can't find it anywhere). I never realized this until now. I was just looking at my specs again to make sure if my Macbook Pro was ready for the upcoming Mountain Lion OS. Please help me understand why this is happening. I'm 100% certain I bought the 1GB video Card and that my mac is supposed to have a quad core processor. I also ordered with the highest resolution screen available at that time which was something like an extra $100. I made sure that I had these extras because I wanted a mac that was going to perform great and not skip a beat. I have noticed it's been skipping here and there and I have been surpirsed at how slow it can get sometimes. I only have 4 GB ram at the moment, but I know that I can upgrade to 16 GB if I need to and have been contemplating on whether i should or not. I also like to do some gaming when I have the extra time and I've noticed that sometimes it has a hard time with some games. I bought this mac around January of this year. Is it possible that there was just a mess up in the shipping on the extras I had added? Thank you for your help.

You are looking here?

Macbook Pro Late 2012 Lagging when connected to external display (1GB Graphics Card)

I have a brand new Macbook Pro 15'' running 10.8.3 with 1GB NVIDIA GeForce GT 650M Graphics Card. I've been using the laptop conected to my Panasonic 720p TV for a while now and suddenly everything started lagging, the dock lagged, the lauchpad also. I have erased programs, music and everything left in my computer. Im running normally on 27% of the RAM memory (8gb) and have a capacity of 500+ GB left in the HDD. Please Advise...

Hi there Chiefinho,
You may find the troubleshooting steps toward the bottom of the article below helpful. Please keep in mind, diagnosing a recurring kernel panic can be difficult. If you would like to avoid this process, or do not know how to perform any of the following steps, consider bringing the Mac to a Genius at an Apple Store or an Apple Authorized Service Provider for assistance. Be sure to ask that, if the drive needs reformatting or replacing, they contact you about escalating your case to a special data recovery service. If you plan to visit an Apple Retail store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).
OS X: About kernel panics
http://support.apple.com/kb/ts3742
-Griff W.

ATI 5770 1GB Video Card For Mac Pro dvi hdmi cable

I am sending video signal over a 50FT HDMI To DVI from my Mac Pro (3,1) via ATI 5770 1GB Video Card For Mac Pro (5.0 GT/s) (181062917108) and I cannot get a constant signal to my TV. The signal stays on for a few seconds or several hours or my TV (Samsung) says there is no signal or I get just a gray static screen.
I never had a problem before with my previous video card the 512MB nVidia GeForce 8800GT with a 25ft long cable. Any ideas people?

A cable of about 5 meters (16 ft) can be manufactured to Category 1 specifications easily and inexpensively by using 28 AWG (0.081 mm²) conductors.[114] With better quality construction and materials, including 24 AWG (0.205 mm²) conductors, an HDMI cable can reach lengths of up to 15 meters (49 ft).[114]
from: http://en.wikipedia.org/wiki/HDMI
You may need a higher-quality cable or a lower resolution for your display to make this work without an HDMI Repeater.

1Gb Media Card Wont Be Recognized As Present Anymore

Ok i have a 1Gb Media Card in my Pearl and it was working fine up to the time i took it out one day and now my phone says its not present anymore...i tried putting an other media card in there and the other card works so i dont unerstand why this one doesnt work. I have alot of stuff on my Media Card that is important to me and that its the only place i have them so...
If anyone can help i would be really happy...Thanks

Hi,
I currently have that problem with my Blackberry Pearl 8100.
I put it a 1 GB MicroSD (Patriot) card and connected the cable to the PC and on the PC I created a folder and added the music to it and pictures. It worked fine but one day I took the SIM card out just because and when I restarted my phone off and on it would not go pass the providers screen. It stays there, it seems it freezes and it cannot be turned off. So, I took the media card out and turned it on and it displays the screen with no problem. So again I turned it off and installed the card back in and it still the same problem. I also somehow I installed the media card in the phone without taking the battery out but it still doesn't recognize the card.
The first time I installed the card I don't think it was formatted(not sure). But it was working fine.
I have installed another card and it still doesn't recognize another card. Also,the media card I tried it on another phone and it is not recognized.
Why would it work the first time as BrandonV(below) but not even locate it or make the phone not work while it has the Media card in?
BrandonV, if you found a solution please let me know.
Anyone else be kind enough to propose a solution.
Thanks,
Gaby
this was someone trying to help out:
Don't know why the BB would stop seeing the media card, but as far as your important stuff... have you tried putting the card into a reader hooked up to the PC to at least retrieve that stuff or move it to that other card that does work?
Sorry that's all I can think of.

Start up disk memory full but can I replace my memory with 1GB disk?

My start up disk memory is full. I have delete a majority of cluttered mess I do not need but I know that I will fill it up fairly soon. I have an external hard drive but how do I put some of my files onto that? If I put it on the hard-drive will I only be able to access it with the hard-drive plugged in?
And I currently have 512MB put into my Powerbook. Can I add in a 1GB memory card into my Powerbook without losing any of my files? And if I will lose my files will the Apple store (where I plan to get 1GB memory put in) put all my files on a disk and then replace it?

You can only use your external drive if it is hooked up, through direct USB/Firewire or through a network.
Adding RAM has no effect on the files you have on your hard drive. I'd suggest, considering how much Apple overcharges for RAM, that you get third party RAM and install it yourself, its not that hard.

DKA790GX Platinum - does the IGP combine with a dedicated card?

hi guys!!
newbie newb question here.
at the moment i am using the onboard motherboard graphics chip. i finally have a dedicated graphics card arriving today though (MSI HD 4890 OC 1GB GDDR5).
i was just wondering, will the onboard graphics of the motherboard boost my dedicated graphics card in any way? i have been looking, but can't find any info, so i presume not?
thank you!

Quote from: cte on 24-August-09, 01:51:32
thanks again guys
yes, on board igp auto switches itself off.
i bought crysis warhead just to test out how the card fared. ive never seen or played crysis before, so i was in for a bit of a treat damn, what a game this is lol!! the first level i spent at least 1-2 hours just swimming in the sea chasing fishes. it felt like i was on holiday lol!! ... well until a big black shark came and ate me!!
i have all settings on Enthusiast, plus aa etc... i am only getting 30fps though. it plays fine i guess. the very occasional stutter. i need to get more memory and try it. for me its good enough... so much better than my last card. its blown me away tbh (crysis + card).
Yeah, ATI's 4890 is a pretty good standard, and thankfully its went down in price a little bit. If you're having stuttering issues, AA is probably what is causing it. Still, awesome game to play on, looks beautiful with the right card. I've only played the Crysis demo, but I enjoyed how it looked.
Other games, like TF2, I often run in the 100~200 FPS range. Left 4 Dead is capped by the developers at 60, so I don't know about that. :(

Need help with buying graphics card and ram for MSI 865PE NEO 2-V

Hi,
I want to buy 1GB of ram for motherboard MSI 865PE NEO 2-V I need help with finding correct parts.
I also want to buy 512Mb or 1GB graphics card.
as i said before i need help with finding correct ones so they match motherboard, I would appreciate if any one would post link to cheap and fitting parts.
I found graphics card allready, i just need to know if it will fit.
the card is
NVIDIA GeForce 7600 GS (512 MB) AGP Graphics Card
Thanks for help.

here you can see test reports for your mobo:
http://www.msi.com/product/mb/865PE-Neo2-V.html#?div=TestReport

Micro SD 1GB memory card

Hi
I'm just a newbie so be nice!
My nokia 6210 navigator screen went blank so the phone is no longer any use to me.
I have the Micro SD 1GB memory card that i wish to use in another nokia phone.
Does anyone know what nokia phones accept the 1GB memory card and are the phones any good?
Many thanks
Solved!
Go to Solution.

@Hulkie
You might like to look at this resource http://europe.nokia.com/find-products/accessories/all-accessories/memory-cards-and-cables/memory-car...
Just interested why your choice of mobile should be dictated by this memory card which has a finite lifespan.
Happy to have helped forum with a Support Ratio = 42.5

Pavilion P6-2326s Power cycling with new graphics card

Hi, I just got a Pavilion P6-2326s from a friend that didn't want it anymore because it was broken. I know a little about PCs so I thought i could fix it and have a spare. It would fire up and run but no video. I figured onboard video was dead and ordered a new cheap video card(EVGA GT610 1GB). I installed it and and no go. the pc just cycles through starting for 3-4 seconds, stops, starts again for few seconds and goes again. It will keep doing this forever or until I hold in power button to shut down. I thought maybe vid card was drawing too much juice, so I removed power supply and put in a known good, 550 watt that I have. Same deal with the start, stop sequence. Tried removing, replcing battery to refresh CMOS in BIOS. Same result with start, stop sequence. Is it safe to assume that Motherboard is probable fried? One othe note, when I got the PC and opened it up, it was the dirtiest PC I have ever seen. It was really caked up with dust and webs. Any ideas out there? Thanks in advance

You would definitely need to remove the add on video card in order to change the BIOS settings, but if you don't have any video with the video card removed, then you still can't see the BIOS settings, and you are pretty much out of luck.
You would probably be throwing good money after bad unless you can find the same motherboard on eBay in used but tested and working condition at a very reasonable price.
Here are listings of the motherboard your model uses. They may be from different model PC's however that use the same motherboard and again, you may not be able to use W8 because if some of those motherboards came from models with W7, there won't be a W8 product key in the BIOS.
http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313.TR0.TRC0.H0.XH-Joshua-H61-uATX+...
Then there might be a problem with getting Windows 8 reactivated since the motherboard was changed even if you do manage to find one that came from a PC with W8.
If it were me...This would be a case where I would strip it for parts, and toss the rest of it out.

Nexus 5548UP with 1Gb ether to 10Gb ether on same switch

I have a Nexus 5548UP switch with a couple of systems some of which have been configured with 1Gb nic's running various OS's and other that have 10Gb nic's. When I try to SSH from 1Gb box to a 1Gb box everything is fine, when I SSH from 1Gb to 10Gb box it does not work but 10Gb to 10Gb boxes will work. The switch is a fresh install and has one VLAN 51 the first 2 ports are setup with LACP and the only differences is speed of 1000 and 10000 for the boxes attached. Is there some trick or additional configuration that is needed to make 1Gb to 10Gb work for SSH and other applications? I trying to setup some test boxes now to have a repeatable environment and will update when completed.
!Command: show running-config
!Time: Fri Jan 9 18:30:44 2009
version 5.2(1)N1(4)
hostname ISC5548B
no feature telnet
feature lacp
feature lldp
...... account info removed
ssh key rsa 2048
ip domain-lookup
class-map type qos class-fcoe
class-map type queuing class-fcoe
match qos-group 1
class-map type queuing class-all-flood
match qos-group 2
class-map type queuing class-ip-multicast
match qos-group 2
class-map type network-qos class-fcoe
match qos-group 1
class-map type network-qos class-all-flood
match qos-group 2
class-map type network-qos class-ip-multicast
match qos-group 2
vrf context management
ip route 0.0.0.0/0 192.168.52.1
vlan 1
vlan 51
name InfoSec
port-profile default max-ports 512
interface port-channel1
switchport access vlan 51
speed 1000
interface Ethernet1/1
lacp port-priority 500
switchport access vlan 51
speed 1000
channel-group 1 mode active
interface Ethernet1/2
switchport access vlan 51
speed 1000
channel-group 1 mode active
interface Ethernet1/3
switchport access vlan 51
speed 1000
interface Ethernet1/4
switchport access vlan 51
speed 1000
interface Ethernet1/5
switchport access vlan 51
speed 1000
interface Ethernet1/6
switchport access vlan 51
speed 1000
interface Ethernet1/7
switchport access vlan 51
speed 1000
interface Ethernet1/8
switchport access vlan 51
speed 1000
interface Ethernet1/9
switchport access vlan 51
speed 1000
interface Ethernet1/32
switchport access vlan 51
speed 1000
interface Ethernet2/1
switchport access vlan 51
interface Ethernet2/2
switchport access vlan 51
interface Ethernet2/3
switchport access vlan 51
interface Ethernet2/4
switchport access vlan 51
interface Ethernet2/5
switchport access vlan 51
interface Ethernet2/6
switchport access vlan 51
interface Ethernet2/7
switchport access vlan 51
interface Ethernet2/8
switchport access vlan 51
interface Ethernet2/14
switchport access vlan 51
interface Ethernet2/15
switchport access vlan 51
interface Ethernet2/16
switchport access vlan 51
interface mgmt0
ip address 192.168.52.4/24
line console
line vty
boot kickstart bootflash:/n5000-uk9-kickstart.5.2.1.N1.4.bin
boot system bootflash:/n5000-uk9.5.2.1.N1.4.bin
ISC5548B# show int brief
Ethernet      VLAN    Type Mode   Status Reason                   Speed     Port
Interface                                                                    Ch #
Eth1/1        51      eth access up      none                       1000(D) 1
Eth1/2        51      eth access up      none                       1000(D) 1
Eth1/3        51      eth access up      none                       1000(D) --
Eth1/4        51      eth access up      none                       1000(D) --
Eth1/5        51      eth access up      none                       1000(D) --
Eth1/6        51      eth access up      none                       1000(D) --
Eth1/7        51      eth access up      none                       1000(D) --
Eth1/8        51      eth access up      none                       1000(D) --
Eth1/9        51      eth access up      none                       1000(D) --
Eth1/10       51      eth access up      none                       1000(D) --
Eth1/11       51      eth access up      none                       1000(D) --
Eth1/12       51      eth access up      none                       1000(D) --
Eth1/13       51      eth access down    Link not connected         1000(D) --
Eth1/14       51      eth access down    Link not connected         1000(D) --
Eth1/15       51      eth access up      none                       1000(D) --
Eth1/16       51      eth access down    Link not connected         1000(D) --
Eth1/17       51      eth access down    SFP not inserted           1000(D) --
Eth1/18       51      eth access down    SFP not inserted           1000(D) --
Eth1/28       51      eth access down    SFP not inserted           1000(D) --
Eth1/29       51      eth access down    SFP not inserted           1000(D) --
Eth1/30       51      eth access down    SFP not inserted           1000(D) --
Eth1/31       51      eth access down    SFP not inserted           1000(D) --
Eth1/32       51      eth access down    SFP not inserted           1000(D) --
Eth2/1        51      eth access up      none                        10G(D) --
Eth2/2        51      eth access up      none                        10G(D) --
Eth2/3        51      eth access up      none                        10G(D) --
Eth2/4        51      eth access up      none                        10G(D) --
Eth2/5        51      eth access up      none                        10G(D) --
Eth2/6        51      eth access up      none                        10G(D) --
Eth2/7        51      eth access down    SFP not inserted            10G(D) --
Eth2/8        51      eth access down    SFP not inserted            10G(D) --
Eth2/9        51      eth access down    SFP not inserted            10G(D) --
Eth2/10       51      eth access down    SFP not inserted            10G(D) --
Eth2/11       51      eth access down    SFP not inserted            10G(D) --
Eth2/12       51      eth access down    SFP not inserted            10G(D) --
Eth2/13       51      eth access down    Link not connected          10G(D) --
Eth2/14       51      eth access down    SFP not inserted            10G(D) --
Eth2/15       51      eth access down    Link not connected          10G(D) --
Eth2/16       51      eth access down    Link not connected          10G(D) --
Port-channel VLAN    Type Mode   Status Reason                    Speed   Protocol
Interface
Po1          51      eth access up      none                      a-1000(D) lacp
Port   VRF          Status IP Address                              Speed    MTU
mgmt0 --           up     192.168.52.4                            100      1500
ISC5548B# show interface ethernet 1/3
Ethernet1/3 is up
Dedicated Interface
Hardware: 1000/10000 Ethernet, address: 8c60.4f49.818a (bia 8c60.4f49.818a)
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA
Port mode is access
full-duplex, 1000 Mb/s, media type is 10G
Beacon is turned off
Input flow-control is off, output flow-control is off
Rate mode is dedicated
Switchport monitor is off
EtherType is 0x8100
Last link flapped 1d02h
Last clearing of "show interface" counters 1d20h
30 seconds input rate 0 bits/sec, 0 packets/sec
30 seconds output rate 304 bits/sec, 0 packets/sec
Load-Interval #2: 5 minute (300 seconds)
    input rate 0 bps, 0 pps; output rate 200 bps, 0 pps
RX
    0 unicast packets 0 multicast packets 0 broadcast packets
    0 input packets 0 bytes
    0 jumbo packets 0 storm suppression bytes
    0 runts 0 giants 0 CRC 0 no buffer
    0 input error 0 short frame 0 overrun   0 underrun 0 ignored
    0 watchdog 0 bad etype drop 0 bad proto drop 0 if down drop
    0 input with dribble 0 input discard
    0 Rx pause
TX
    202 unicast packets 87027 multicast packets 1077 broadcast packets
    88306 output packets 7601016 bytes
    0 jumbo packets
    0 output errors 0 collision 0 deferred 0 late collision
    0 lost carrier 0 no carrier 0 babble 0 output discard
    0 Tx pause
4 interface resets
ISC5548B# show interface ethernet 2/1
Ethernet2/1 is up
Dedicated Interface
Hardware: 1000/10000 Ethernet, address: 8c60.4f23.5de0 (bia 8c60.4f23.5de0)
MTU 1500 bytes, BW 10000000 Kbit, DLY 10 usec
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA
Port mode is access
full-duplex, 10 Gb/s, media type is 10G
Beacon is turned off
Input flow-control is off, output flow-control is off
Rate mode is dedicated
Switchport monitor is off
EtherType is 0x8100
Last link flapped 1d20h
Last clearing of "show interface" counters never
30 seconds input rate 0 bits/sec, 0 packets/sec
30 seconds output rate 312 bits/sec, 0 packets/sec
Load-Interval #2: 5 minute (300 seconds)
    input rate 0 bps, 0 pps; output rate 200 bps, 0 pps
RX
    285 unicast packets 0 multicast packets 218 broadcast packets
    503 input packets 32724 bytes
    0 jumbo packets 0 storm suppression bytes
    0 runts 0 giants 0 CRC 0 no buffer
    0 input error 0 short frame 0 overrun   0 underrun 0 ignored
    0 watchdog 0 bad etype drop 0 bad proto drop 0 if down drop
    0 input with dribble 0 input discard
    0 Rx pause
TX
    406 unicast packets 89109 multicast packets 1077 broadcast packets
    90592 output packets 7827146 bytes
    0 jumbo packets
    0 output errors 0 collision 0 deferred 0 late collision
    0 lost carrier 0 no carrier 0 babble 0 output discard
    0 Tx pause
1 interface resets

I have a laptop connected to a port on the switch and I am currently adding a SUSE 11 SP2 to another port that has a 10G card for a NIC. Once I finished the install I will post more specific tests using ping and SSH to illustrate.
Here is the output you requested.
ISC5548B# show port-channel summary
Flags: D - Down        P - Up in port-channel (members)
        I - Individual H - Hot-standby (LACP only)
        s - Suspended   r - Module-removed
        S - Switched    R - Routed
        U - Up (port-channel)
        M - Not in use. Min-links not met
Group Port-       Type     Protocol Member Ports
      Channel
1     Po1(SU)     Eth      LACP      Eth1/1(P)    Eth1/2(P)
ISC5548B# sh int po1
port-channel1 is up
Hardware: Port-Channel, address: 8c60.4f49.8188 (bia 8c60.4f49.8188)
MTU 1500 bytes, BW 2000000 Kbit, DLY 10 usec
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA
Port mode is access
full-duplex, 1000 Mb/s
Input flow-control is off, output flow-control is off
Switchport monitor is off
EtherType is 0x8100
Members in this channel: Eth1/1, Eth1/2
Last clearing of "show interface" counters never
30 seconds input rate 560 bits/sec, 0 packets/sec
30 seconds output rate 3064 bits/sec, 2 packets/sec
Load-Interval #2: 5 minute (300 seconds)
    input rate 128 bps, 0 pps; output rate 2.74 Kbps, 2 pps
RX
    578695 unicast packets 11167 multicast packets 1056 broadcast packets
    590918 input packets 760063851 bytes
    0 jumbo packets 0 storm suppression bytes
    0 runts 0 giants 0 CRC 0 no buffer
    0 input error 0 short frame 0 overrun   0 underrun 0 ignored
    0 watchdog 0 bad etype drop 0 bad proto drop 0 if down drop
    0 input with dribble 0 input discard
    0 Rx pause
TX
    392417 unicast packets 434693 multicast packets 2984 broadcast packets
    830094 output packets 320257324 bytes
    0 jumbo packets
    0 output errors 0 collision 0 deferred 0 late collision
    0 lost carrier 0 no carrier 0 babble 0 output discard
    0 Tx pause
1 interface resets

Is there a big difference between Intel Iris Pro graphics and the NVIDIA GeForce GT 750M graphics processor with 1GB of GDDR5 memory

Is there a big difference between Intel Iris Pro graphics and the NVIDIA GeForce GT 750M graphics processor with 1GB of GDDR5 memory, is it worth paying an extra $200?

Software support of graphics card is key. If no graphics card is mentioned in software specs, then it can be ignored. Mostly games and high end image and video graphics software are affected.

DC-CAMZ 4200 with 1GB SD CARD

Similar Messages

Maybe you are looking for