Dc integration between solaris 10 & windows 2k3 server
Dear All
I have a sun solaris server & a windows 2003 server where we configure ADC.win 2K3 is my Domain Controller. i wan't a solution that whenever i create a user on my DC same user should created in solaris . is it possible or any one guide me for this.
I think there are lots of threads regarding this question in the forum.
Basically there are two different methods to achieve this, the first method is to use Suns LDAP/Kerberos solution to authenticate users against the Active Directory.
The second method is to use a third party solution, such as vintela (vintela.com), which is much easier to install and takes care of all the integration for you.
.7/M.
Similar Messages
-
Cannot establish a link between MacPro and Windows 2003 Server
I just had an issue where we had a server crash. This server supports several PCs, as well as two Macs. The server has been brought back online and can communicate with all of the PCs. However, neither one of the Macs can now communicate with the server.
When I try to connect through the sidebar in the finder window, it will bring up the authentication window. But after I type in my password and hit enter, it gives me the message, "The alias "" could not be opened because the original item could not be found."
When I try to connect through Go>Connect to Server, it gives me the message, "The Finder cannot complete the operation because some data in "" could not be read or written (Error code -36).
My IT guy says that everything is alright with the server and that the problem has to be in the Mac settings. He does not know anything about Macs, however.
Can somebody help me out with this issue?The only thing that comes to mind is a few settings in the Security Options of the Local Policy. Here's a link:
http://allinthehead.com/retro/218/accessing-a-windows-2003-share-from-os-x
Not sure if that's it, but I hope it helps. -
Seamless Integration Between Weblogic and Oracle Portal Server
Hi,
Can someone please give me some insight into Seamless integration from Weblogic Portal Server to Oracle Portal Server.
The Scenario is as:
A user logs into the Weblogic Portal, this Portal desktop displays some portlets. Links on these portlets navigate the user to the portlets deployed on Oracle Portal.
Is this feasible, and what version of the 2 servers would support this feature.
Can someone please snd across online resources which deal with my doubt.
many Tx.
Regards,
MuktaYou might want to consider using WSRP to aggregate portlets deployed on
Oracle into WLP. Check edocs and dev2dev for some info on WSRP in WLP.
You can use 8.1 SP3 or later.
Check with Oracle to find out which version of their product offers WSRP
support.
Subbu
Mukta Shetye wrote:
Hi,
Can someone please give me some insight into Seamless integration from Weblogic Portal Server to Oracle Portal Server.
The Scenario is as:
A user logs into the Weblogic Portal, this Portal desktop displays some portlets. Links on these portlets navigate the user to the portlets deployed on Oracle Portal.
Is this feasible, and what version of the 2 servers would support this feature.
Can someone please snd across online resources which deal with my doubt.
many Tx.
Regards,
Mukta -
Comparison between Solaris & Windows
Can anyone help me providing info regarding the difference between solaris and windows. Are there any articles , presentations or white papers available regarding this info on net.
thanks,
Mohsin.It's a whole other animal.
-
ACS 3.3 and windows 2k3 issue
Have an issue with installation of ACS 3.3 trial version on windows 2k3 server. When I go to setup an AAA client type of RADIUS (Cisco Aironet), with values entered for Hostname, IP address and Key, and submit changes, dialog comes back saying "RADIUS key value must not be blank".
Have implemented this on a windows 2000 server with no issues. Have tried install on 4 different 2003 servers all behave in this manner.
Anyone else seen this?I had the same problem several months ago. The solution I found was to download and install the latest java on the server.
-
LAG between SG300 and Windows server on VMware ESXi 5.5
Hello,
I'm trying to setting up a LAG of 2 x 1GB between a Windows 2012 server on VMware 5.5 and a SG300-52 switch, but without any success till now.
The SG300 is configured as follow :
config-file-header
SG300-52
v1.4.0.88 / R800_NIK_1_4_194_194
CLI v1.0
set system mode router
file SSD indicator encrypted
ssd-control-start
ssd config
ssd file passphrase control unrestricted
no ssd file integrity control
ssd-control-end cb0a3fdb1f3a1af4e4430033719968c0
port jumbo-frame
vlan database
vlan 10,20,30,40,50,60,70,99
exit
voice vlan id 40
voice vlan oui-table add 0001e3 Siemens_AG_phone________
voice vlan oui-table add 00036b Cisco_phone_____________
voice vlan oui-table add 00096e Avaya___________________
voice vlan oui-table add 000fe2 H3C_Aolynk______________
voice vlan oui-table add 0060b9 Philips_and_NEC_AG_phone
voice vlan oui-table add 00d01e Pingtel_phone___________
voice vlan oui-table add 00e075 Polycom/Veritel_phone___
voice vlan oui-table add 00e0bb 3Com_phone______________
port-channel load-balance src-dst-mac-ip
ip dhcp pool network DHCP-VLAN1
address low 192.168.2.120 high 192.168.2.139 255.255.255.0
default-router 192.168.2.1
exit
ip dhcp pool network DHCP-Internal
address low 172.16.0.40 high 172.16.0.79 255.255.255.0
default-router 172.16.0.1
exit
ip dhcp pool network DHCP-Management
address low 10.0.0.120 high 10.0.0.139 255.255.255.0
default-router 10.0.0.1
exit
ip dhcp pool network DHCP-Phone
address low 10.0.2.80 high 10.0.2.99 255.255.255.0
default-router 10.0.2.1
exit
ip dhcp pool network DHCP-Pro
address low 10.0.1.140 high 10.0.1.199 255.255.255.0
default-router 10.0.1.1
exit
ip dhcp relay address 10.0.0.60
ip dhcp relay enable
ip dhcp information option
bonjour interface range vlan 1,10,20,30
qos trust cos
hostname SG300-52
username cisco password encrypted c464af817287343305cbd6493c593885695df531 privilege 15
ip ssh server
ip telnet server
interface vlan 1
ip address 192.168.2.1 255.255.255.0
no ip address dhcp
interface vlan 10
name Management
ip address 10.0.0.1 255.255.255.0
ip dhcp relay enable
interface vlan 20
name Pro
ip address 10.0.1.1 255.255.255.0
ip dhcp relay enable
interface vlan 30
name Internal
ip address 172.16.0.1 255.255.255.0
ip dhcp relay enable
interface vlan 40
name Phone
ip address 10.0.2.1 255.255.255.0
ip dhcp relay enable
interface vlan 50
name TV
interface vlan 60
name "Exchange DB Replication"
ip address 10.0.100.1 255.255.255.0
interface vlan 70
name Test
interface vlan 99
name WAN
ip address 192.168.0.2 255.255.255.224
interface gigabitethernet1
switchport mode access
switchport access vlan 10
interface gigabitethernet2
switchport trunk allowed vlan add 10,30,40
no cdp enable
interface gigabitethernet3
switchport trunk allowed vlan add 20
interface gigabitethernet4
switchport mode access
switchport access vlan 60
interface gigabitethernet5
switchport mode access
switchport access vlan 10
interface gigabitethernet6
switchport mode access
switchport access vlan 20
interface gigabitethernet7
switchport mode access
switchport access vlan 20
interface gigabitethernet8
switchport mode access
switchport access vlan 30
interface gigabitethernet9
switchport trunk allowed vlan add 10
interface gigabitethernet25
switchport mode access
switchport access vlan 10
interface gigabitethernet26
channel-group 2 mode on
interface gigabitethernet27
channel-group 2 mode on
interface gigabitethernet28
switchport trunk native vlan 60
interface gigabitethernet29
switchport mode access
switchport access vlan 20
interface gigabitethernet30
switchport mode access
switchport access vlan 30
interface gigabitethernet32
qos cos 5
switchport mode access
switchport access vlan 10
interface gigabitethernet45
spanning-tree link-type point-to-point
switchport mode access
switchport access vlan 50
macro description switch
!next command is internal.
macro auto smartport dynamic_type unknown
interface gigabitethernet46
switchport mode access
switchport access vlan 50
interface gigabitethernet47
switchport mode access
switchport access vlan 50
interface gigabitethernet48
switchport mode access
switchport access vlan 50
interface gigabitethernet49
switchport mode access
switchport access vlan 99
interface gigabitethernet51
spanning-tree link-type point-to-point
switchport trunk allowed vlan add 10,20,30,40,50,60,70,99
macro description switch
!next command is internal.
macro auto smartport dynamic_type switch
interface Port-channel2
description HBAIP-VM2
switchport trunk allowed vlan add 10,20,30,40
exit
ip default-gateway 192.168.0.1
ip route 10.0.0.0 /24 192.168.0.1
ip route 10.0.1.0 /24 192.168.0.1
ip route 10.0.2.0 /24 192.168.0.1
ip route 172.16.0.0 /24 192.168.0.1
GE26 & GE27 have been added in LAG2
VLAN 1UP, 10T, 20T, 30T & 40T have joined the LAG
In VMware, a vswitch has been created, using the 2 NIC connected to the LAG; and a Virtual Machine Port Group has been created for each VLAN member of the LAG
In Windows 2012, the 4 Network adapters have been added (1 for each VLAN), but they cannot ping their gayeway
However, the interfaces receives correctly thei IP addresses (and options) from the DHCP server, via the DHCP relay of the SG300
I also following the configuration described in this link (http://it-erate.com/setting-lag-vmware-esxi-5-cisco-sg300/) but without any success.
Do you have any idea ?
Thanks in advance for your help.Please make sure the load balance mode in VMware is Route based on IP Hash.
The default value is virtual switch port ID, which cannot work together with port-channel in upstream switch, as explained in:
http://www.vmware.com/files/pdf/virtual_networking_concepts.pdf
"Note: If you select either srcPortID or srcMAC hash, you should
not configure the physical switch ports as any type of team or
bonded group." -
Query on integrating windows file server into SAP KM using WEBDAV
hi
I have sucessfully integrated windows file server into SAP KM using WEBDAV. I have query in it regarding the possible validation against the portal Database user. Can we configure such that the user comparison happens for LDAP as well as database user. Have anyone configured such a scenario?
Regards,
Ganesh NHi Ganesh,
this should work in principle.
However you would need a user in Active Directory for each user in the portal database that should connect to the file server if you are using the SSO22KerbMap Module as I assume.
In my whitepaper I have mentioned this for the internal user index_service that does only exist in the portal database.
Best regards,
André -
I seem to have discovered a dichotomy between the ability of CHKDSK v6.2.9200.16384 to detect and repair an external NTFS drive, when executed on Windows 2012 Server Standard Build 9200 x64 and Windows 8.1 Enterprise x64. There should be no difference in executing
the same application between these two systems.
Even though both are 64-bit systems, and both are up to date, and both are running the same version of chkdsk, chkdsk on Windows 12 Server was UNABLE to detect an NTFS filesystem on an external WD 1TB USB drive (detected fs as RAW), while chkdsk on Windows
8.1 Enterprise WAS ABLE to detect the NTFS filesystem on the same external drive, and was able to repair it.
So, what is the difference between these two systems? Why should the same version of
any application yield different results between these systems?
The only result on Windows 2012 Server was:
C:\Windows\system32>chkdsk /x /f M:
The type of the file system is RAW.
CHKDSK is not available for RAW drives.
The result on Windows 8.1 Enterprise was:
Log Name: Application
Source: Chkdsk
Date: 11/26/2014 8:10:05 AM
Event ID: 26214
Task Category: None
Level: Information
Keywords: Classic
User: N/A
Computer: James-HP
Description:
Chkdsk was executed in read/write mode.
Checking file system on N:
Volume label is WD 1TB.
Stage 1: Examining basic file system structure ...
57978 file records processed.
File verification completed.
2 large file records processed.
0 bad file records processed.
Stage 2: Examining file name linkage ...
Index entry tsbyebye of index $I30 in file 0x29 points to unused file 0x3f.
Deleting index entry tsbyebye in index $I30 of file 41.
58026 index entries processed.
Index verification completed.
Stage 3: Examining security descriptors ...
Cleaning up 9 unused index entries from index $SII of file 0x9.
Cleaning up 9 unused index entries from index $SDH of file 0x9.
Cleaning up 9 unused security descriptors.
Security descriptor verification completed.
25 data files processed.
CHKDSK is verifying Usn Journal...
The remaining of an USN page at offset 0x1de7cb0 in file 0x3aa
should be filled with zeros.
Usn Journal verification completed.
Correcting errors in the Volume Bitmap.
Windows has made corrections to the file system.
No further action is required.
976759807 KB total disk space.
234756 KB in 42 files.
176 KB in 26 indexes.
153755 KB in use by the system.
65536 KB occupied by the log file.
976371120 KB available on disk.
4096 bytes in each allocation unit.
244189951 total allocation units on disk.
244092780 allocation units available on disk.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Chkdsk" />
<EventID Qualifiers="0">26214</EventID>
<Level>4</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-11-26T13:10:05.000000000Z" />
<EventRecordID>11361</EventRecordID>
<Channel>Application</Channel>
<Computer>James-HP</Computer>
<Security />
</System>
<EventData>
<Data>
Checking file system on N:
Volume label is WD 1TB.
Stage 1: Examining basic file system structure ...
57978 file records processed.
File verification completed.
2 large file records processed.
0 bad file records processed.
Stage 2: Examining file name linkage ...
Index entry tsbyebye of index $I30 in file 0x29 points to unused file 0x3f.
Deleting index entry tsbyebye in index $I30 of file 41.
58026 index entries processed.
Index verification completed.
Stage 3: Examining security descriptors ...
Cleaning up 9 unused index entries from index $SII of file 0x9.
Cleaning up 9 unused index entries from index $SDH of file 0x9.
Cleaning up 9 unused security descriptors.
Security descriptor verification completed.
25 data files processed.
CHKDSK is verifying Usn Journal...
The remaining of an USN page at offset 0x1de7cb0 in file 0x3aa
should be filled with zeros.
Usn Journal verification completed.
Correcting errors in the Volume Bitmap.
Windows has made corrections to the file system.
No further action is required.
976759807 KB total disk space.
234756 KB in 42 files.
176 KB in 26 indexes.
153755 KB in use by the system.
65536 KB occupied by the log file.
976371120 KB available on disk.
4096 bytes in each allocation unit.
244189951 total allocation units on disk.
244092780 allocation units available on disk.
</Data>
<Binary>7AE2000050000000550000000000000004000000000000000000000000000000</Binary>
</EventData>
</Event>Hi,
Please check if the Windows Server 2012 is still UNABLE to detect the external NTFS drive after attach the drive from the Windows 8.1 back to the Windows Server 2012.
A RAW filesystem simply means that it is a filesystem that is not recognized by Windows. The most common cause of external hard drives suddenly becoming RAW drives is if they are disconnected from a computer without using the “Safely Remove Hardware” option.
You can use the Dskprobe tool (Dskprobe.exe) to make repairs to check it the issue still exist on the Windows Server 2012.
What is this Raw File System
http://blogs.technet.com/b/ganand/archive/2008/02/22/what-is-this-raw-file-system.aspx
Best Regards,
Mandy
If you have any feedback on our support, please click
here .
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Problems with Solaris 10 Secure Desktop server and Windows XP Client
Solaris 10 Secure Desktop server - Windows XP Client - I've tried to open the Solaris Machine's desktop using the browser based http://MysolarisServerName/sdg and the windows native client
http://MySolarisServerName/tarantella.
I log in ok to the Solaris Server.
I can open a VT420 session with the solaris machine, and this works OK, but whenever I try anything else e.g. smc, or full screen desktop it doesn't. I get various error messages e.g. can't open display, and Session Failed - X Session timeout.
I've also installed Cgywin X Server on the Win XP machine to see if this makes a difference, but it doesn't.
Any clues anyone?Being able to run the VT420 session, but not any X-Window sessions is the clue; it's an X-specific problem. Most likely, ssh isn't configured correctly, see: http://docs.sun.com/source/819-4309-10/en-us/base/indepth/ssh.html
Pasting in the (most) relevant bit:
Adding support for X applications
To support X applications through OpenSSH, enable X11 forwarding in the OpenSSH configuration file. On each Secure Global Desktop host:
1. Edit the sshd_config file and include the following:
X11Forwarding yes
2. Edit the ssh_config file and include the following:
ForwardAgent yes
ForwardX11 yes
3. Restart the SSH daemon.
Using SSH and X authorization
If SSH connections fail, when X authorization is enabled, you may have to run the SSH daemon in ipv4-only mode because Secure Global Desktop may not support the xsecurity extension used on your server. You enable ipv4-only mode by editing your system SSH configuration file. For example:
* On SUSE Linux, edit the /etc/sysconfig/ssh file and add a SSHD_OPTS="-4" line.
* On Red Hat Enterprise Linux, edit the /etc/sysconfig/sshd file and add a OPTIONS="-4" line.
Note If the SSH configuration file does not exist on your system, you can create it.
You must restart the SSH daemon after making this change. -
DataGuard setup between Windows XP Pro and Windows 2003 Server - possible?
Oracle 9.2. The documentation says "The hardware and operating system architecture on the primary and standby locations must be the same". I understand that this is recommended setup and it will be much better if it will be setup on EXACTLY same hardware and OS. My questions is - Is it possible to set it up between XP Pro and 2003 Server? Had anyone done it successfully the past?
Thank youHi,
between XP Pro and 2003 ServerBoth are Win* releases, both are 32bit. So I can't see why it would not work. But I think that certified combination requies that both computers use same O.S. release (XP pro xor 2k3 server).
Regards,
Yoann. -
Compatibility issues between solaris 10 patches and Weblogic server 9.2
Is there any documentation about possible incompatibility between certain solaris patches and Weblogic server?
Hi,
Can you post the output of below commands from your OS?
uname -a
getconf LONG_BIT
Do you want to download and install 64-bit WLS 9.2 on your OS?
- - Tarun -
Urgent: integrating windows file server into ep using KM.
hi..
can somebody give me detail steps of integrating windows file server into ep using KM.
when i give password in the network path it is not accepting the password of the windows....
Good answers will be rewarded points...
bye....Hi,
You can check:
System Administration-System Configuration-KM-CM-Repository Managers-File System Repository-create a new item
Root Directory can be:
machine\sharedirectory
and in CM-Global Services-Network Paths->create a new item
in Network Path field:
machine\sharedirectory
enter your password
user: domain\user
Integrating Documents from a Windows System into KM
http://help.sap.com/saphelp_nw2004s/helpdata/en/ed/b334ea02a2704388d1d2fc3e4298ad/frameset.htm
Patricio. -
Unable to install the KB913384 Patch - Windows 2K3 Std x-86 Server.
Hi,
For the Fix to the below .Net Runtime 2.0 Error we tried to fix this issue by installing the hotfix described in Eventviewer as
mentioned below
Event ID : 1000
Raw Event ID : 1000
Record Nr. : 15
Category : None
Source : .NET Runtime 2.0
Error Reporting Type : Error
Message : Faulting application w3wp.exe, version 6.0.3790.1830, stamp 42435be1, faulting module mscorwks.dll, version 2.0.50727.42, stamp 4333e7ec, debug? 0, fault address 0x000e9f96.
When Trying to install the KB913384 Patch downloaded from the below URL
http://support.microsoft.com/kb/913384
Getting the below error while installing
The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded bay be missing, or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exists on your computer and
that you have the correct upgrade patch.
Server Details :
OS Name Microsoft(R) Windows(R) Server 2003, Standard Edition
Version 5.2.3790 Service Pack 2 Build 3790
System Type X86-based PC
.NET Frameworks Installed:-
Microsoft .NET Framework 3.0 Service Pack 2
Microsoft .NET Framework 3.5 SP1
Microsoft .NET Framework 4 Client Profile
Microsoft .NET Framework 2.0 Service Pack 2
Microsoft .NET Framework 4 Extended
Manifest.ini Details:-
[Patch Attributes]
PatchCode={DC18570F-307A-4ECA-BBF8-CC025CF6C483}
ID=KB913384
Uninstallable=1
[Wrapper Config]
PatchTitle=NDP20-KB913384-X86
KBArticle=913384
Thanks and Regards, Dinesh kumar (T.)Use Aaron Stebner's removal tool to remove .NET and reinstall .NET
http://blogs.msdn.com/b/astebner/
Regards
Milos -
Problem while integrating windows file server into SAP KM using WEBDAV
Hi
I am trying to integrate windows file server into SAP KM using WEBDAV . I have downloaded the kerberos ini filter and included in the windows system. I am only trying to bring the files in the same system into KM but with no luck. When i check the log file in the kerberos folder i am getting
<b>12:02:22 10828/10476 E OnPreprocHeaders: Found 0 UserPrincipalNames for ADSI Filter (&(objectCategory=person)(objectClass=user) (userPrincipalName=xxxx))</b>.
In the log i am getting the following
ERROR! Delegation Flag:Use any authentication protocol: NOT ACTIVE
Open 'Active directory Users and Computers'. Choose <domain> -> 'Computers'.
Right-click 'IDBSRV8' and choose 'Properties'.
Select 'Delegation' and 'Trust this computer for delegation to specified services only'.
Select 'Use any authentication protocol'.
ERROR! The Trusted-to-Authenticate-for-Delegation flag is not set for SPN 'HOST/idbsrv8.idbhq.org'.
Please check the SPN by calling 'setspn -l IDBSRV8'.
If the SPN is well known, configure the Trusted-to-Authenticate-for-Delegation flag:
Open 'Active directory Users and Computers'. Choose <domain> -> 'Computers'.
Right-click 'IDBSRV8' and choose 'Properties'.
Select 'Delegation' and 'Trust this computer for delegation to specified services only'.
Select 'Use any authentication protocol' and choose 'Add'.
Select 'Users or Computers' and enter IDBSRV8 as object name.
Add the ServicePrincipalName HOST/idbsrv8.idbhq.org.
Can anybody please help me in this regard???
Regards,
Ganesh N
Message was edited by:
Ganesh NatarajanHi Ganesh,
this error message tells you that there is no user in your active directory that has the userPrincipalName xxxx.
The SSO22KerbMapModule works as follows.
1. It receives a SAP Logon Ticket from the WebDAV request.
2. If valid the SAP username is extracted. In your case the SAP username is xxxx.
3. It then searches for a user in AD. It does so using the attribute in the ini-file that has been specified to contain the SAP username. In your case the SAP username should be identical with the userPrincipalName.
So you have to make sure that the portal user id (j_user) is mapped to the same AD user attribute that is specified in the ini-file .
Best regards,
Andre -
Integration between SAP server & External System
Dear all,
would you explain the pros and cons of integration between SAP and external system. what types issue i can face on SAP and external system respectively.
regards,
diyaHi,
I don't know what is a COSMOS system and I don't know your company....
You will never get meaningful answers on an internet forum for questions so dependent on your specific environement and requirements. If you know your ECC6 system, then read the COSMOS documentation and ask the COSMOS vendor.
Regards,
Olivier
Maybe you are looking for
-
Impact of resetting region in CUCM
CUCM version is 10.5.2. I have created a new region and have done intra & inter region configuration. Now the new region has configuration that affects the existing regions (like max bit rate between the new region & the old regions). I have assig
-
Save file on Flash Media Encoder Live 3
Use the 'Save to file' for archiving my events...when I go to play back the archive.. flash players don't recognize the file it says FV4 format ...what is going on??
-
Suddenly my Safari screen display is too wide and not high enough. I've gone into system prefs.-displays- and selected the highest resolution (1440x900) without solving the problem. Please help me get my normal display. Thanks
-
My ipod has 22,773,688 minutes. Someone stole ipod got it back but its locked and cant get in it?
-
Mac Pro won't start after bootcamp partition
I have just used Bootcamp to place a partition on my MacBook Pro (2.5ghz 2008) and install Windows 7 ultimate x64. Whilst in Windows for the first time, I ran the windows support software (windows drivers for mac) from a DVD. I then allowed 2 wind