DC jacks; are they compatible with all 3000 series

I would like to know if all the DC power jacks are the same or compatible for all the lenovo 3000 series notebooks?
I have a lenovo 3000 C100 notebook, and the problem that I am experiencing is that the unit dose not power up when
the power button is press. here's the rundown of the problem; when I plug the power cord onto the laptop the indicator
ligth for the power is on, but when I press the power button to on, the power indicator turns off and the laptop does not
turn on at all, the only time the power indicator turns on is when I disconnect the power cord from the laptop and plug it
back on. I also try it with the battery without the AC cord, the indictor lights for both power and battery is on, but when the
the power button is pressed both indicator lights will flash (one at a time ) for at least 2 seconds and does not come back
on at all and the laptop still does not power up at all. I have also tested the unit with another different battery and AC power
cord from a same working 3000 C100, still the same issues. so I figure that it has to be the power DC jack, check lenovo
website, but found none for the C100. so I want to know if other DC jack from let's say the T4 or T60, Thinkpad can be use
as replacement part for my unit. my laptop is only a year and a half old. I would be very gratefull for any kind of help.
Thanks

there are not many motherboard for Lenovo 3000 laptops on sale on the web, the only place where you can get it, is through Lenovo parts service... i would suggest you sell your laptop for parts and then get a new laptop, it would be probably be more economical that way then getting a new motherboard through Lenovo.
Message Edited by wjli2 on 10-15-2008 09:04 PM

Similar Messages

Want to know if Internet Explorer 10 and 11 are they compatible with Windows Server 2008 32 bit?

Want to know if Internet Explorer 10 and 11 are they compatible with Windows Server 2008 32 bit?

Compare & contrast:
Internet Explorer 11 system requirements
http://windows.microsoft.com/en-us/internet-explorer/ie-system-requirements#ie=ie-11-win-7
Internet Explorer 10 system requirements
http://windows.microsoft.com/en-us/internet-explorer/ie-system-requirements#ie=ie-10-win-7
Internet Explorer 9 system requirements
http://windows.microsoft.com/en-us/internet-explorer/ie-system-requirements#ie=ie-9
Neither IE11 nor IE10 is supported in Vista either.
~Robear Dyer (PA Bear) MS MVP-Windows Client since 2002 Disclaimer: MS MVPs neither represent nor work for Microsoft

New Keyboard Not Compatible With All USB Flash Drives

Hi,
I've noticed that the new super-thin iMac keyboards are not compatible with all USB Flash Drives. Here's an example.
I have 2 USB Flash Drives. One is a ByteStor 2GB USB 2.0 High Speed Dataferry Flash Drive, the other is a Kingston DataTraveler 1GB USB 2.0 Flash Drive. Neither of these drives used to work with the previous design of iMac keyboard, giving me the "low power" warning.
However, the ByteStor works just fine with the new super-thin iMac keyboard, but oddly enough, the Kingston DataTraveler doesn't. Does anyone know why this is? What's the difference? When buying a new USB Flash Drive, how do you know if it's compatible with the new iMac keyboard or not?

Thanks. Yeah the Kingston DataTraveler works just fine if I plug it into one of the USB 2.0 ports on the back of the iMac. But if I plug it into the new thin Apple Keyboard, it gives the low power warning.
http://www.amazon.co.uk/Kingston-Technology-1GB-DataTraveler-Flash/dp/B000AV14M2 /ref=pdbbs2/203-9795812-0230310?ie=UTF8&s=electronics&qid=1187109154&sr=8-2
Anyway, I'll try that new keyboard software update and report back.

If I buy creative cloud and save my work to a USB, and another computer only has creative suite, are they compatible?

I don't know which to buy, creative suite 6, or creative cloud, which seems to have more. but are they compatible with eachother?, if I save work to one and another computer only has the other, can it recognise the other program and I can still use both?

Those are the collective names for suites for several different software titles. Creative Cloud has about 29 different software titles.
File format incompatibility affects different software in different ways. Photoshop, Indesign may have issues but Dreamweaver will probably not.

If i have model A1811 should/can i download lion in order to get icloud? Are they compatible?

If i have model A1811 should/can i download lion in order to get icloud? Are they compatible?

A1811 is simply the white or black plastic case non-Unibody MacBook. Any one of 17 different models.
To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report if you’re running 10.7 Lion). When System Profiler comes up check the Model Identifier and post it back here.
The model 1,1 cannot run Lion all the others can run Lion but you'll have to max out your RAM and upgrade to 10.6 Snow Leopard first.
You can upgrade from 10.5 to 10.6 with no problems. Any program that runs under 10.5 will run under10.6. You might have to upgrade some drivers for printers, etc.... And you will have to install Rosetta if you have any Power PC applications http://www.macobserver.com/tmo/article/snow_leopard_installing_rosetta/ I recently upgraded an older MacBook (model 1,1) straight from 10.4 to 10.6.
To upgrade your iLife and iWork. If you only want iPhoto or other single apps from iLife '11 you can get them from the App Store after you've upgraded to 10.6.6. iPhoto, iMovie or Garage Band for $15 each and Pages, Keynote or Numbers from iWork '09 for $20 each.
You can order a Snow Leopard 10.6 install disk for $29 as long as you have at least1gb of RAM and 5gb of free space on your hard drive. http://store.apple.com/us/product/MC573Z/A?mco=MTY3ODQ5OTY
Once you are at 10.6.8 you can buy Lion for $29 from the App Store if you have at least a model 2,1 MacBook. Lion will require at least 2gb of RAM but really needs 4gb to run smoothly. Also Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Lion.
Before Mac switched to Intel processors they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications.

EVGA 2 GB GeForce GT520 and HP Pavilion d4495t? Are they compatible?

Upon "normal" windows load seeing only blue screen. Monitor message that the DVI is not connected. With original card saw similar but could see screen in "safe mode". Unfortunately, with original card monitor kept going to sleep. Tried several monitors before going for a new card. Any feedback welcomed. Thanks!

Hello @inblingham,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you are having issues geting the EVA GeForce GT 520 graphics card to work on your HP Pavilion d4495.se-a Desktop PC. According to the EVGA GeForce GT 520 page it requires a PCIe 2.0 x16 expansion slot and according to your HP Pavilion d4495.se-a Desktop PC Product Specifications page your computer has a PCIe x16 (means it is 1.0). I am including the Motherboard Specifications, MS-7184 (Amethyst) page for you to reference as it is the motherboard you have installed.
Now according to an article by overclock.net titled The final answer to the controversial PCIe x16 version compatibility
"Now we all know that PCI SIG is famous for designing the newer versions of PCI express slots which were backward and forward compatible with all the versions previously made. Until they introduced PCIe x16 v2.1, after which they chain of backward compatibility was reported broken. On various forums there were instances of people having trouble with their PCIe v2.1 graphic cards not running on PCIe v1.1 slots.".
I suspect this is where your issue is arising. The card appears to be too advanced for your computer and will not work correctly.
I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Leopard TM backups are NOT compatible with Snow Leopard

I just discovered while upgrading to Snow Leopard that Time Machine backups made in Leopard are not compatible with Snow Leopard at this time. So, for those of you who are considering upgrading to Snow Leopard using your TM backups to restore your data, the TM backup will not be recognised by Snow Leopard.
I called Apple Care to check this when I went to restore my data as I had done an Erase and Install, and they confirmed that I would have to either:
a) use the data on my TM drive as any other data only backup, or
b) re-inslall Leopard, restore the TM backup, then upgrade to Snow Leopard rather than erase and install.
For info

Scott in MD wrote:
Incidentally, yes, the "package" file is the in.Progress file. It seems to have the incremental updates, since it's a real big file, and has very recent entries. Again the last set of timestamped folders (i.e. a full backup) was over a year ago.
No, something's very wrong. All (completed) TM backups are the same.
Inside the Backups.backupdb folder should be a single folder with your computer name; inside that should be a series of folders with the date & time of each remaining backup, plus the Latest folder which is an alias to the most recent of the date & time folders, except an "in.Progress" folder.
The "in.Progress" folder is an incomplete (failed or cancelled) backup, and is ignored in all TM displays, since it's unusable.
In any event I have not deleted or changed any of the files. Also the stuff in the "Latest" folder is over a year old. But I've had TM running the whole time.
So does that mean (I'm hoping) that my recent stuff will be recovered from the inProgress file if I can ever get this working? Or does it mean I'm screwed anyways, because the best I can get is the files from the Latest or most recent timestamped folder (again, both a year back).
First, run +*Repair Disk+* again (and again) until it either fixes all the errors or can't fix any more. If it can't fix any more, it's barely possible a heavy-duty 3rd-party app such as +DiskWarrior 4.2+ can (it's about $100).
Let's see if DU can fix it on a second pass. Hopefully it will, and the problem was preventing the more recent backups from appearing.

Old Bookmarks are not compatible with Firefox version 20+

Background Information:
I use the old client version 3.6 as there's an old utility addon that the author stopped updating and will not work with the newer revisions. Despite disabling the update feature both in about:config and in preferences, the browser still eventually updates (Originally I was using 3.4, and would prefer to use that, but no matter how much I try I can no longer roll it back from 3.6 to 3.4 even if I reinstall using a 3.4 installer). As a result I've had a habit of keeping a copy of my firefox directory in case it updates itself again without asking, which it has. This might help you guys out in answering the countless people who have lost their bookmarks due to the upgrades released this year, and will hopefully someone to investigate and release a patch/utility to fix the issue.
Issue:
I have verified that the newest clients from at least version 20 and onwards, are not compatible with the older bookmark JSON files. People who have been upgraded to the latest revision not only lose their bookmarks, but CANNOT restore them either, as Firefox will only return the error message: "Unable to Process the Backup File".
I have confirmed that the files themselves are perfectly intact with no sign of corruption, and are as intended. They restore ok to older browser revisions (In my case specifically 3.6), but will not restore to the newer client revisions. This is not a fault with the bookmark backups, but with the newer clients (I'm guessing they changed the way they store the information in the JSONs at some point. I note in the code for the JSONs that GUID was never used in the older revisions, but it is in the newer revisions. Perhaps this is causing an incompatibility issue? You just need to adjust the client so that it looks for the GUID and if none can be found to ignore it rather than decide the file is corrupt.
Old JSON Code snippet: {"title":"","id":1,"dateAdded":1306666129870000,"lastModified":1306670152435000,"type":"text/x-moz-place-container","root":"placesRoot","children":[{"title":"Bookmarks Menu","id":2,"parent":1,"dateAdded":1306666129870000,"lastModified":1381254048121000,"type":"text/x-moz-place-container","root":"bookmarksMenuFolder","children":[{"title":"Recently Bookmarked","id":6,"parent":2,"annos":[{"name":"Places/SmartBookmark","flags":0,"expires":4,"mimeType":null,"type":3,"value":"RecentlyBookmarked"}],"type":"text/x-moz-place","uri":"place:folder=BOOKMARKS_MENU&folder=UNFILED_BOOKMARKS&folder=TOOLBAR&sort=12&excludeQueries=1&excludeItemIfParentHasAnnotation=livemark%2FfeedURI&maxResults=10&queryType=1"},{"index":1,"title":"Recent Tags","id":7,"parent":2,"annos":[{"name":"Places/SmartBookmark","flags":0,"expires":4,"mimeType":null,"type":3,"value":"RecentTags"}],"type":"text/x-moz-place","uri":"place:sort=14&type=6&maxResults=10&queryType=1"},{"index":2,"title":"","id":8,"parent":2,"dateAdded":1294868015246000,"lastModified":1294868015246000,"type":"text/x-moz-place-separator"}
New JSON Code Snippet: {"title":"","guid":"5rkFafJ6AnRZ","id":1,"index":0,"dateAdded":1396387525168000,"lastModified":1396387525168000,"type":"text/x-moz-place-container","root":"placesRoot","children":[{"title":"Bookmarks Menu","guid":"m7vLM41-lzQi","id":2,"index":0,"parent":1,"dateAdded":1396387525168000,"lastModified":1396387526173000,"type":"text/x-moz-place-container","root":"bookmarksMenuFolder","children":[{"title":"Recently Bookmarked","guid":"BEffyw6xva93","id":13,"index":0,"parent":2,"dateAdded":1396387526172000,"lastModified":1396387526172000,"annos":[{"name":"Places/SmartBookmark","flags":0,"expires":4,"value":"RecentlyBookmarked"}],"type":"text/x-moz-place","uri":"place:folder=BOOKMARKS_MENU&folder=UNFILED_BOOKMARKS&folder=TOOLBAR&queryType=1&sort=12&maxResults=10&excludeQueries=1"},{"title":"Recent Tags","guid":"WmnlbVv38Bjv","id":14,"index":1,"parent":2,"dateAdded":1396387526172000,"lastModified":1396387526172000,"annos":[{"name":"Places/SmartBookmark","flags":0,"expires":4,"value":"RecentTags"}],"type":"text/x-moz-place","uri":"place:type=6&sort=14&maxResults=10"}
Solution?
Well in my case I had a backup copy of the old revision directory. To restore I opened the copy, and exported the bookmarks as an HTML, which I restored in the newer client. If you do not have a copy of the old client, the best thing would be to try and reinstall an older revision of the client and either make a copy of the program folder and use another copy of that so you can use both the new and old clients and not worry about the loss of an older revision since you'll always have 2 copies of the old client (One you're using, one you use to restore if it upgrades). Or you export the bookmarks as an HTML, then upgrade the client to the newest and import the HTML instead of the JSON files.
Please investigate and create an easier solution to a silly incompatibility issue. ^_^

This happens if you create a backup and forget to add the file extension manually when Firefox didn't add it automatically or you may have removed it when modifying the suggested name.

I have a sony handy cam model HDR-HC1 and a mac pro running osx10.9.3, are they compatible? as far as downloading movies from my handy cam. thanks in advance

i have a sony handy cam model HDR-HC1 and a mac pro running osx10.9.3, are they compatible? as far as downloading movies from my handy cam. thanks in advance. If not, is there a different route i can take to get those recordings in to my mac pro?

See if the cam shows up under Devices in the Image Capture app.
Image Capture is located in your Applications folder.
Launch Image Capture then connect the camera.
The camera should show up under Devices top left side of the Image Capture window.
Now look at the bottom left side of the window. Click the: Connecting this (device) opens: pop up menu and select an application to import your photos.
You can also select a folder to import photos from the Import To: pop up menu.
Selet the photos you want to import then click Import or Import All on the right.

Superdrive in macbook & mac mini ... / compatible with all Sony displays ..

superdrive in macbook & mac mini are and dvdram drive [read/write] ? if yes what is the speed ? Can accept disks cd/dvd created on a windows machine ?
mac mini is compatible with all Sony displays like SONY 17 inch SDM-X73/B .26 DELUXEPRO 1280X1024 DVI-D ?

Good Morning,
 Welcome to the Apple Discussion Forums 
To address your questions...
Per the [Apple MacBook Technical Specifications Page|http://www.apple.com/macbook/specs.html] the MacBook's SuperDrive is compatible with the following media types...
*8x slot-loading SuperDrive (DVD±R DL/DVD±RW/CD-RW)*
*Maximum write:* 8x DVD-R, DVD+R; 4x DVD-R DL (double layer), DVD+R DL (double layer), DVD-RW, DVD+RW; 24x CD-R; 10x CD-RW
*Maximum read:* 8x DVD-R, DVD+R, DVD-ROM; 6x DVD-ROM (double layer DVD-9), DVD-R DL (double layer), DVD+R DL (double layer), DVD-RW, and DVD+RW; 24x CD
Also, yes, the MacBook is compatible with reading from CD/DVD Discs recorded in Microsoft Windows.
Addressing your monitor question, again, yes. That monitor should be compatible with your MacBook when coupled with an [Apple Mini-DVI to DVI Adapter|http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLI D?mco=60A2B5CD&fnode=home/shopmac/macaccessories/cables&nplm=M9321G/B].
Hope this helps! 
David

Is Headstart 6i compatible with all Designer 6i versions? Where to download?

We consider upgrading from Designer 6.0 / Headstart patch 12.4
to Designer 6i / Headstart 6i, as we are now migrating from a
7.3.4 db to 8.1.7 and from Win98 to Win2000.
I have seen documentation on migration issues from Designer 6.0
to 6i rel.2, and from Headstart to patch 13. But I understand
that with introduction of Headstart 6i, patch 13 is no longer
supported.
1. I assume that Headstart 6i could work with all Des.6i-
versions, is that right?
2. I have found the place to download patch 13, but where can I
download Headstart 6i ???

Headstart 6i is compatible with all Designer 6i versions.
However, we have found one odd quirk with Headstart 6i and Forms
6i versions 6.0.13 and higher.
Description ===========
1. When using a multi-select LOV (which is displayed in a modal
dialog window), you select the records you want, press OK, and
the application exits.
2. When using a shuttle control to move records from left to
right or vice versa, you select the records you want, press '>'
to move them, and the application exits. This occurs in Forms
6.0.8.13.0 and higher. It did NOT occur in prior releases. This
is some kind of forms bug.
Workaround ==========
For some reason the call to procedure 'renumber' in
qms$msel.process_records in qmslib65.pll causes the application
to exit. If you copy the code from renumber to all the places
from which it is called, it works fine.

Is Adobe Dreamweaver and Muse the same as Web Suite? Are they compatible?

I currently have Adobe Creative Cloud. My friend is building me a website using Adode Web Suite. Is Adobe Dreamweaver and Muse the same as Web Suite? Are they compatible?

Dreamweaver is NOT the same as Muse. These are two very different products aimed at different users.
Muse is consumer level software for hobbyists and non-coders with little web experience. Dreamweaver is pro-level software for experienced web developers. Coding skills are essential. More than likely, your web designer is using Dreamweaver.
Muse is only available by subscription to the Creative Cloud. Dreamweaver can be obtained on a single license, in a product suite or by subscription to the Creative Cloud. See Product Comparison Guide below for details:
http://www.adobe.com/products/creativesuite/buying-guide.html
Nancy O.

I just discovered my videos from my Canon digital camera are not compatible with imovie or idvd so I need new software. Any ideas?

Hi. I just discovered my videos from my Canon digital camera are not compatible with imovie or idvd (I'm very disappointed about that.) The photos are stored in my iphoto and I can burn a dvd using idvd but there is no audio So.... I need new software. I have a Mac OS X 10.5.8 and my digital still camera is the Canon Cybershot These are home movies of my kids and the viedeos are precious. Thanks in advance!

Canon Cybershot
I can't trace a camera of that name. All that comes up is either the Sony Cybershot or the Canon Powershot!
Please confirm excactly what camera you have, and what version of iMovie.

Is InDesign 2.0 compatible with all versions of Adobe Pro?

Is InDesign 2.0.2 compatible with all versions of Adobe Professional?
For years, I created InDesign documents using 2.0.2, placing PDF documents created using Acrobat Distiller 6.0.1 (Windows) with no issue. At the beginning of 2010, my software was updated from Adobe Pro 6 to Adobe Acrobat Pro 9 with no change to InDesign.
When I place PDF documents created using the newer 9 version, I receive an error, "This PDF document was saved with security settings which prevent its pages from being placed." I am unable to decipher what needs to be changed. Under the security properties of the PDF documents created using version 6 and 9, there are NO security settings.
Is there an action step I can take when placing the PDF documents (version 9) into InDesign 2.0?

In Acrobat 9, open the PDF.
Go to the Document Menu
Select Reduct File Size
Set the compatability level
Alternately, Export the PDF to PDF/X, and select the 1a option. This should 'dumb down' the PDF enough for ID 2 to accept it.
HTH
-mt

How do I add scripts in order to make the page compatible with all the browsers.

How do I add scripts in order to make the page compatible with all the browsers.

As Jon says, please be more specific about "don't line up right"
I notice you are inserting some arbitrary tags which will cause very unpredictable displays with varying user viewports and text preferences.
In 2008-2009, Families Forward benefited 278 homeless Philadelphia families, 
including 834 children. Families Forward assisted 1,413 stranded travelers, including 
235 children. In the first 6 months of 2009-2010, from July 1, 2009 to 
January 1, 2010, Families Forward assisted 185 homeless families and 220 
stranded travelers.

DC jacks; are they compatible with all 3000 series

Similar Messages

Maybe you are looking for