DC not found/updated after activation

Hello all,
After successfully activating open activities over NWDS (and the DEV Runtime System already defined), the WebDynpro DC is not updated nor created.
How do I resolve this issue. Please help.
Thanks.
Regards,
Jan

Hello,
The disable automatic deployment is unchecked. Though, perhaps this info might aid: the server that hosts the NWDI had just patched from SP9 to SP14 and it appears that settings form for defining runtime systems is different.
Though I have already tried to SDM passwords, re-sync user and user passwords. But to no avail.
Thanks.
Regards,
Jan

Similar Messages

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2. I've erased and reformatted the drive; reconnected Time Machine(it saw it) and began a new backup. The backup starts again but fails before completing with backup drive not found error. I used the 10.7.2 combo update. Any help on how to fix this problem would be appreciated.

Arghhhhhhhhhhhhhhhhhhh!!!!!!
After waiting since October for a fix, I have now upgraded the firmware on the Time Capsule and installed the new Airport Utility, released yesterday, and the situation is even worse.
Up until now, the Airport Utility had an option to disconnect all drives manually and the Time Capsule would then work until the next reboot – a temporary (?) work-around.
Now that option does not exist in the new-look Airport Utility. And the Airport Utility installation can’t be rolled back and the old utility won’t restore.
The sparesbundle is still not accessible. Anyone worked out a work-around in the new environment yet?
I have another Time Machine backup working fine to a trusty old Lacie Drive so erased the one on my Time Capsule to see if that works. I have renamed the Capsule and the Time Capsule Drive. But to build another full backup will take at least two days and I shall be away from tomorrow and am reluctant to leave the Capsule and computer up and running for a week. And I’ll bet the sparsbundle will still be nowhere to be found.
How can Apple screw up so badly when they are to become the richest company in the entire world and – soon – will have more cash in the bank than the entire United States? Can’t they afford someone who really can sort this out? Especially when a Firewire connected hard drive – my trusty and simple LaCie – works fine.
Words, almost, fail me.

"Page Not Found" Err after arnd 5 mins of processing on SAP Trans iView

Hello All,
We are facing an issue related to a SAP Transaction iView on our portal.
This transaction is supposed to upload an excel file in RPM and provide a log after the upload is performed. We are trying to upload around 180 projects and the processing goes on in the backend. The program in the backend works as required, but as the iView shows a page not found after around 5-6 mins of processing, the users cannot see the logs in the end!
I suppose there should be some kind of time-out parameter for the Transaction type iView, but we are not able to figure it out!!
We have tried the following parameters without success:
icm/server_port_0 = PROT=HTTP, PORT=8035, TIMEOUT=3600, PROCTIMEOUT=3600
icm/keep_alive_timeout (sec.) = 3600
icm/conn_timeout = 5000
rdisp/plugin_auto_logout = 1800
Please do suggest if there is anything else that we need to update to get this process to continue on the Portal and avoid the 'Page Not Found' issue.
For the current on-going discussion for the same issue, please refer:
["Page Not Found" Error after arnd 5 mins of processing on SAP Trans iView;
Thank you for your time!
Regards,
Gaurav
Edited by: Gaurav Shah on Dec 9, 2008 7:22 PM

Hi Gaurav,
I know this thread is old. but i am getting the similar page cannot be displayed after 600 seconds.
I changed the ICM timeout to 1800 from 600 but it still doesnt seem to work. Were you able to resolve the issue. If yes then please let me know the fix.
Regards
Aditya

UI error "The requested lookup key was not found in any active" workaround

Hi All.
Some of you might have this problem when making a UI-Connection "The requested lookup key was not found in any active activation context"
Talking to SAP Support and Gianluigi Bagnoli about the problem here is a sum of the problem and the workaround to prevent it (at least untill SAP development fix the problem)
Some facts:
- The error is present in SBO2005A SP01 and SBO2005B SP00, SBO2007A should not be affected
- The error occur because the SAP client fail to provide the correct/entire connection-string
- The problem is actually an underlying problem from Microsoft (try searching google with the error message)
- Normally after the error occur, you can go to Administration > Add-ons and start the add-on manually without problems
Some additional observations
- The error mostly happen just after startup of a windows machine
- We have had a couple of customers that have had the problem, then upgraded the SAP client to a new patchlevel and got rid of the problem (but we have also had customers where this did not help)
- Seem to be happening more often of slower machines
Workaround
Knowing that this problem is tied to and incorrect connection string is also the "workaround"... What you could do is to create exception handling around the UI connection, and if it fails connection using the development connection string (like you do during development) The connection string is: 0030002C0030002C00530041005000420044005F00440061007400650076002C0050004
Using this method, you will be able to establish a connection even if the client is unable to provide you a correct connectionstring, but the draw-back of this workaround is that the add-on will be indicated as failed in the Add-on Manager and the user is not able to stop the add-on in any way other than disconnection from the company.

Hi,
I am looking for a solution to the error "The requested lookup key was not found in any active activation context" too.
In our add-on we do two SboGuiApi.Connect(sConnectionString), one from MyAddon.exe and the other one from MyAddon.dll. The .exe catches messages and .dll interacts with UI to paint forms etc. It is since the .exe and .dll are not in the same thread. The first connection works fine in the .exe, then that connection string is passed to the dll and the error is raised. The rare thing is why it works fine from the development enviroment, but doesn't work when SAP is starting the Addon?
Is it possible connect twice?
Can we connect in the .exe using the connection string received from SAP and in the .dll using the development connection string?
It is over
Windows XP 2002 SP2
SBO2007A patchlevel 15
VS 2005 C#
SQL Server 2005
Thank you

After installing iOS6, my Maps are not working at all, anything i search it says "result not found" even after placing a pin and selecting "Direction to here" i get the same result not found. Very disappointed with the new iOS

After installing iOS6, my Maps are not working at all, anything i search it says "result not found" even after placing a pin and selecting "Direction to here" i get the same result not found. Very disappointed with the new iOS.

Have you run it in a debugger? That will show you exactly what is happening and why.

The tag name: "embed" Not found in currently active versions.[XHTML 1.0 transitional]

Hello I have this message "The tag name: "embed" Not found in
currently active versions.[XHTML 1.0 transitional]" appear when I
validate one of my pages in my site, the page contains a flash
picture/animation. Please can anyone explain how I can correct this
error?
The tag name: "embed" Not found in currently active
versions.[XHTML 1.0 transitional] this is in relation to:
"<embed src="Map.swf" quality="high" pluginspage="
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash"
type="application/x-shockwave-flash" width="536"
height="437"></embed>"
Any help would be appreciated.
Thanks Steve

> how I can correct this error?
You don't. You ignore it. The <embed> tag is not valid
HTML, but it is
required to have reliable rendering of your Flash across
various browsers.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Steve@FHS" <[email protected]> wrote in
message
news:fcm6ss$kvs$[email protected]..
> Hello I have this message "The tag name: "embed" Not
found in currently
> active
> versions.[XHTML 1.0 transitional]" appear when I
validate one of my pages
> in my
> site, the page contains a flash picture/animation.
Please can anyone
> explain
> how I can correct this error?
>
> The tag name: "embed" Not found in currently active
versions.[XHTML 1.0
> transitional] this is in relation to:
>
> "<embed src="Map.swf" quality="high"
> pluginspage="
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Versio
> n=ShockwaveFlash" type="application/x-shockwave-flash"
width="536"
> height="437"></embed>"
>
> Any help would be appreciated.
>
> Thanks Steve
>
>

"Page not found" error after 5 minutes of see "processing" on the screen

We are using WebLogic 8.1 server and also the WebLogic proxy as our front end. When a user runs a process that takes over 5 minutes using the Proxy URL they receive an IE "Page not found" error after 5 minutes of seeing "processing" on the screen. If they run it on none Proxy URL (directly on WebLogic server) it works fine.
We have looked into the WLIOTimeoutSecs parameter and set in the web.xml for both the HttpClusterServlet and HttpProxyServlet, but this had no affect.
Is there another timeout that controls this 5 minute timeout? It seems if one uses Apache and sets the WLIOTimeoutSecs parameter to a higher number than 300 seconds there is not an issue.
Did this parameter get omitted for the WebLogic Proxy and if so, what does one use?
Thanks,
Jim

Hello George,
Thank you for the quick reply. I will surely try the option suggested by you.
But what i was thinking is that as this is not a Connection Time Out (500) error, instead its a Page Not Found error, it would be Session-Timeout and not Connection Time-Out.
Maybe I should be looking at:
SESSION-TIMEOUT due to kernel:
Kernel parameter: rdisp/gui_auto_logout
Kernel parameter: rdisp/plugin_auto_logout
as per the SAP OSS Note: 705013
But again, I think this Note is pointing to the SICF service and IAC type of iView and not SAP Transaction type iView. Please advice.
Thanks,
Gaurav
Edited by: Gaurav Shah on Dec 4, 2008 9:37 PM
Edited by: Gaurav Shah on Dec 4, 2008 9:42 PM

"cfajaximport" Not found in currently active versions

Dear all
First I want to say I am very begginning.
My problem is when I want to use some RIA sample appliaction
(from adobe site) which is using some AJAX feature I have unknown
runtime error during data saving. I have information that "The tag
name: "cfajaximport" Not found in currently active versions. " What
is it mean and how to resolve it?
I have ColdFusion 8.0.1 (developer edition), IE6.0
Thank you in advance for help

I was about to type up a long answer on the fist thing to
check, and I
found this blog that does it all for me.
http://www.coldfusionguy.com/ColdFusion/blog/index.cfm/2007/11/13/CF8-AJAX-Features-CFIDES cripts-and-CFAjaxImport
To summarize, you need to make sure the CFIDE/scripts/ folder
is
properly accessible. You should be able to type the following
URL into
a browser, unless you have your site configured in a
non-default manner.
http://yourDomain/CFIDE/Scripts/cfform.js
I.E.
http://localhost/cfide/scripts/cfform.js
on *my* development server.
If that does not return a file, then none of the built in
ColdFusion
form or AJAX functionality is going to work.

Function module "GM_DOCUMENT_REVERSE" not found. after Patch Update

Hi Abapers/Basis
After patch update i am not able to do FBCJ reversal entry getting below error message.
Runtime Errors         CALL_FUNCTION_NOT_FOUND
Exception              CX_SY_DYN_CALL_ILLEGAL_FUNC
Date and Time          25.05.2011 14:43:26
Short text
     Function module "GM_DOCUMENT_REVERSE" not found.
What happened?
     The function module "GM_DOCUMENT_REVERSE" is called,
     but cannot be found in the library.
     Error in the ABAP Application Program
     The current ABAP program "SAPLRWCL" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_FUNC', was
     not caught in
    procedure "CALL_DISPATCHER_STORNO_R" "(FORM)", nor was it propagated by a
     RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    The program "SAPLRWCL" contains the CALL FUNCTION statement.
    The name of the function module to be called is "GM_DOCUMENT_REVERSE".
    No function module exists with the name "GM_DOCUMENT_REVERSE".
    All function modules are listed in the Function Library (SE37).
    Possible reasons:
    a) Wrong name specified. Pay particular attention to
       upper/lower case and underscores ("_").
       or
    b) Transport error
    c) In the case of an enqueue/dequeue module,
       the lock object may not have been activated
       (ABAP/4 Dictionary).
How to correct the error
    Check the last transports to the SAP System.
    Is the program "SAPLRWCL" currently being changed?
    If an enqueue/dequeue module is involved, is the activation
    of the lock object missing in the ABAP/4 Dictionary?
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "CALL_FUNCTION_NOT_FOUND" "CX_SY_DYN_CALL_ILLEGAL_FUNC"
    "SAPLRWCL" or "LRWCLF10"
    "CALL_DISPATCHER_STORNO_R"
    Function modules with names similar to "GM_DOCUMENT_REVERSE":
    GM_DOCUMENT_CLOSE
    GM_DOCUMENT_RECORD
    GM_DOCUMENT_DELETE
    GM_DOCUMENT_POST
    GM_DOCUMENT_CHECK
    G_DOCUMENT_RECORD
    GJ_DOCUMENT_RECORD
    GM_DOCUMENT_PROJECT
    GET_DOCUMENTS
    GM_DOCUMENT_DISPLAY
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
   To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
   Display the system log by calling transaction SM21.
   Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
   In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
Moderator message: please don't just dump your dumps, search for SAP notes or open a call with SAP instead.
Edited by: Thomas Zloch on May 25, 2011 2:16 PM

Hi Karthik,
Thank you for ur reply.
I did not implement any user exit/ badi. Dump is saying that my smarform function module does not exist in the se37 library.
I have excuted my form through se38, that time is working fine. When i tried through output type it is going to dump.
Regards,
Kusuma.

All Game Center friends' status says "Never Played" and not be updated after restoring iphone

I restored my iphone today, and after that, recent game activity line of all of my friends on my game center friends list shows "Never Played" and has not been updated.
Is there anyone saw this issue and found any solutions?

added more description as below:
Just in case, the following is what I did/saw :
1. I already upgraded ios 5.1.1 and there's no problem about Game Center before restoreing ios.
2. I restored ios(iphone 4s) via iTunes ( ver. 10.6.1.7) on windows pc
3. After finishing the restore (I tried it with both backup and as-new-setup), launch Game Center app and log-in as my Game Center ID
4. Open "Friends" tab and see the friend list on the left of the screen
5. See description below all friends' name shows "Never Played"
I tried log-out and re-login Game Center, but this wasn't fixed.
I feel very sad to see my Game Center ID looks broken.
But I'm also guessing this issue comes from Game Center's server side, because this worked fine before restoring ios.

"Page Not Found" Error after arnd 5 mins of processing on SAP Trans iView

Hello All,
We are facing an issue related to a SAP Transaction iView on our portal.
This transaction is supposed to upload an excel file in RPM and provide a log after the upload is performed. We are trying to upload around 180 projects and the processing goes on in the backend. The program in the backend works as required, but as the iView shows a page not found after around 5-6 mins of processing, the users cannot see the logs in the end!
I suppose there should be some kind of time-out parameter for the Transaction type iView, but we are not able to figure it out!!
We have tried the following parameters without success:
icm/server_port_0     = PROT=HTTP, PORT=8035, TIMEOUT=3600, PROCTIMEOUT=3600
icm/keep_alive_timeout (sec.) = 3600
icm/conn_timeout                = 5000
rdisp/plugin_auto_logout       = 1800
Please do suggest if there is anything else that we need to update to get this process to continue on the Portal and avoid the 'Page Not Found' issue.
Thank you for your time!
Regards,
Gaurav

Hello George,
Thank you for the quick reply. I will surely try the option suggested by you.
But what i was thinking is that as this is not a Connection Time Out (500) error, instead its a Page Not Found error, it would be Session-Timeout and not Connection Time-Out.
Maybe I should be looking at:
SESSION-TIMEOUT due to kernel:
    Kernel parameter:    rdisp/gui_auto_logout
    Kernel parameter:    rdisp/plugin_auto_logout
as per the SAP OSS Note: 705013
But again, I think this Note is pointing to the SICF service and IAC type of iView and not SAP Transaction type iView. Please advice.
Thanks,
Gaurav
Edited by: Gaurav Shah on Dec 4, 2008 9:37 PM
Edited by: Gaurav Shah on Dec 4, 2008 9:42 PM

404 Not Found Error after 5.2 SP04 Patch04 deployment

Hi,
Today I did an installation and deployment of the 5.2 SP04 Patch 04 to one of our standalone
SAP ME Application Servers. The installation and deployment worked without any error.
However afterwards I could not login to SAP ME on the patched server.
I get a 404 Not found error page after entering my site, login and password. The page I am being redirected
to is http://<appserver>:50000/manufacturing/j_security_check?VALIDATE=true
The real funny thing started right after when I discovered that my other SAP ME Application Server (Which has
not been patched and is on 5.2 SP04 Patch03) started showing the same error message.
Anybody has an idea on what is going on?
Br,
Johan Nordebrink

Hi,
Yes both my SAP ME Database servers (WIP and ODS) are up and running.
After restaring my patched server this morning I found that before I get the 404 error during login I get a
message saying License file corrupted 11904.
On my other application server I don't get license file corrupted. There I get the 404 error but when I try to login again right after I am already logged in to SAP ME and can run the application.
This is the last default trace messages from my patched application server since this mornings restart:
#2.0 #2010 10 08 08:24:06:035#+0200#Warning#com.sap.engine.core.service630.container.ReferenceResolver#
com.sap.ASJ.krn_srv.000064#BC-JAS-EJB#sap.com/ejbormapping_api#1CC1DE01D044000000000006000006EC###com.sap.engine.core.service630.container.ReferenceResolver########Thread[main,5,main]#Plain##
Interface [ejbormapping] without declared provider#
#2.0 #2010 10 08 08:24:06:035#+0200#Warning#com.sap.engine.core.service630.container.ReferenceResolver#
com.sap.ASJ.krn_srv.000064#BC-JAS-EJB#sap.com/ejblocking_api#1CC1DE01D044000000000007000006EC###com.sap.engine.core.service630.container.ReferenceResolver########Thread[main,5,main]#Plain##
Interface [ejblocking] without declared provider#
#2.0 #2010 10 08 08:24:06:035#+0200#Warning#com.sap.engine.core.service630.container.ReferenceResolver#
com.sap.ASJ.krn_srv.000064#BC-JAS-ADM-MON#sap.com/dsr_ejbcontext_api#1CC1DE01D044000000000008000006EC###com.sap.engine.core.service630.container.ReferenceResolver########Thread[main,5,main]#Plain##
Interface [dsr_ejbcontext_api] without declared provider#
#2.0 #2010 10 08 08:24:06:035#+0200#Warning#com.sap.engine.core.service630.container.ReferenceResolver#
com.sap.ASJ.krn_srv.000064#BC-JAS-ADM-ADM#sap.com/visual_administration_api#1CC1DE01D044000000000009000006EC###com.sap.engine.core.service630.container.ReferenceResolver########Thread[main,5,main]#Plain##
Interface [visual_administration] without declared provider#
#2.0 #2010 10 08 08:24:24:159#+0200#Warning#com.sap.engine.services.deploy#
com.sap.ASJ-dpl.ds-000463#BC-JAS-DPL#deploy#1CC1DE01D044000300000000000006EC#1674450000000118##com.sap.engine.services.deploy#####aeb67914d2a411dfad841cc1de01d044##0#Service Runner [tcjecachemgmt~srv]#Plain##
Warnings:
   The Cache Configuration Upload container reports that doesn't support parallel operations, which slows down the deploy, update and remove operations with applications.
Solution: Please contact the container holder to fix these warnings.#
#2.0 #2010 10 08 08:24:39:112#+0200#Error#com.sap.esi.esp.service.server.ESPServiceInterfaceAbstract#
#BC-ESI-WS-JAV#tcesiespsrv#1CC1DE01D044000B00000000000006EC#1674450000000768##com.sap.esi.esp.service.server.ESPServiceInterfaceAbstract####AEB67914D2A411DFAD841CC1DE01D044#aeb67914d2a411dfad841cc1de01d044#aeb67914d2a411dfad841cc1de01d044#0#Service Runner [tcesiespsrv]#Plain##
There is problem reading the hostname from the ClusterManager. This could lead to improper wsdl links.#
#2.0 #2010 10 08 08:24:43:753#+0200#Info#com.sap.archtech.daservice#
#BC-ILM-DAS#sap.com/tcTechSrvXML_DAS#1CC1DE01D044001000000002000006EC#1674450000000042#sap.com/tcTechSrvXML_DAS#com.sap.archtech.daservice#Administrator#0##BAB53AFBD2A411DFA501000000198CD2#bab53afbd2a411dfa501000000198cd2#bab53afbd2a411dfa501000000198cd2#0#Application [21]#Plain##
MasterMethod: An error occurred during the System Landscape Directory synchronization: Getting WBEMClient failed: com.sap.sldserv.exception.SldServiceRuntimeException: Destination SLD_Client not found. Destinations are defined in the Destination service.. Please check that destination SLD_Client is maintained correctly.
[EXCEPTION]
com.sap.sldserv.exception.SldServiceRuntimeException: Getting WBEMClient failed: com.sap.sldserv.exception.SldServiceRuntimeException: Destination SLD_Client not found. Destinations are defined in the Destination service.. Please check that destination SLD_Client is maintained correctly.
     at com.sap.sldserv.SldApplicationService.getWbemClient(SldApplicationService.java:150)
     at com.sap.archtech.daservice.commands.MasterMethod.synchronizeSystemLandscapeDirectory(MasterMethod.java:428)
     at com.sap.archtech.daservice.DASmain.init(DASmain.java:188)
     at javax.servlet.GenericServlet.init(GenericServlet.java:270)
     at com.sap.engine.services.servlets_jsp.server.security.PrivilegedActionImpl.run(PrivilegedActionImpl.java:97)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAs(Subject.java:396)
     at com.sap.engine.services.servlets_jsp.server.application.WebComponents.addServlet(WebComponents.java:336)
     at com.sap.engine.services.servlets_jsp.server.deploy.ApplicationThreadInitializer.loadServlets(ApplicationThreadInitializer.java:977)
     at com.sap.engine.services.servlets_jsp.server.deploy.ApplicationThreadInitializer.run(ApplicationThreadInitializer.java:288)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:182)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:212)
Caused by: com.sap.sldserv.exception.SldServiceRuntimeException: Destination SLD_Client not found. Destinations are defined in the Destination service.
     at com.sap.sldserv.SldApplicationService.getWbemClient(SldApplicationService.java:105)
     ... 13 more
#2.0 #2010 10 08 08:25:00:472#+0200#Warning#com.sap.engine.services.deploy#
com.sap.ASJ.dpl_ds.000554#BC-XI-IS-WKB#sap.com/com.sap.xi.mdt.soa#1CC1DE01D044001200000055000006EC#1674450000000001##com.sap.engine.services.deploy####BAB53AFBD2A411DFA501000000198CD2#bab53afbd2a411dfa501000000198cd2#bab53afbd2a411dfa501000000198cd2#0#Deploy Parallel Start Thread#Plain##
Global operation [startApp] over [application] [sap.com/com.sap.xi.mdt.soa] finished successfully for [578]ms on server [1674450
>>> Warnings <<<
     1). Application sap.com/com.sap.xi.rwb is not deployed, but resolving of application sap.com/com.sap.xi.mdt.soa continues because it has weak reference to this application.]#
#2.0 #2010 10 08 08:25:01:144#+0200#Error#System.err#
#BC-JAS-WEB-JSF#ecjavajsf#1CC1DE01D044001600000000000006EC#1674450000000984#sap.com/xapps~ra.edm.prjmgmt.jee.app#System.err#Guest#0##BAB53AFBD2A411DFA501000000198CD2#bab53afbd2a411dfa501000000198cd2#bab53afbd2a411dfa501000000198cd2#0#Application [18]#Plain##
Oct 8, 2010 8:25:01 AM com.sun.faces.config.ConfigureListener contextInitialized
INFO: Initializing JSF 1.2_08 for context '/EDMProjectWEB'
#2.0 #2010 10 08 08:25:02:237#+0200#Error#com.sap.tc.lm.itsam.ui.config.registration.RoleToGroupMappingServlet#
#BC-JAS-ADM#sap.com/tclmitsamuicontentmodelear#1CC1DE01D044001700000000000006EC#1674450000001041#sap.com/tclmitsamuicontentmodelear#com.sap.tc.lm.itsam.ui.config.registration.RoleToGroupMappingServlet#Guest#0##BAB53AFBD2A411DFA501000000198CD2#bab53afbd2a411dfa501000000198cd2#bab53afbd2a411dfa501000000198cd2#0#Application [21]#Plain##
SAP_NWA_READONLY group does not exist
[EXCEPTION]
com.sap.security.api.NoSuchGroupException: Group "SAP_NWA_READONLY" does not exist.
     at com.sap.security.core.imp.GroupFactory.getGroupByUniqueName(GroupFactory.java:1429)
     at com.sap.tc.lm.itsam.ui.config.registration.RoleToGroupMappingServlet.init(RoleToGroupMappingServlet.java:82)
     at javax.servlet.GenericServlet.init(GenericServlet.java:270)
     at com.sap.engine.services.servlets_jsp.server.application.WebComponents.addServlet(WebComponents.java:324)
     at com.sap.engine.services.servlets_jsp.server.deploy.ApplicationThreadInitializer.loadServlets(ApplicationThreadInitializer.java:977)
     at com.sap.engine.services.servlets_jsp.server.deploy.ApplicationThreadInitializer.run(ApplicationThreadInitializer.java:288)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:182)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:280)
#2.0 #2010 10 08 08:25:02:237#+0200#Error#com.sap.tc.lm.itsam.ui.config.registration.RoleToGroupMappingServlet#
#BC-JAS-ADM#sap.com/tclmitsamuicontentmodelear#1CC1DE01D044001700000001000006EC#1674450000001041#sap.com/tclmitsamuicontentmodelear#com.sap.tc.lm.itsam.ui.config.registration.RoleToGroupMappingServlet#Guest#0##BAB53AFBD2A411DFA501000000198CD2#bab53afbd2a411dfa501000000198cd2#bab53afbd2a411dfa501000000198cd2#0#Application [21]#Plain##
SAP_NWA_FULL group does not exist
[EXCEPTION]
com.sap.security.api.NoSuchGroupException: Group "SAP_NWA_FULL" does not exist.
     at com.sap.security.core.imp.GroupFactory.getGroupByUniqueName(GroupFactory.java:1429)
     at com.sap.tc.lm.itsam.ui.config.registration.RoleToGroupMappingServlet.init(RoleToGroupMappingServlet.java:99)
     at javax.servlet.GenericServlet.init(GenericServlet.java:270)
     at com.sap.engine.services.servlets_jsp.server.application.WebComponents.addServlet(WebComponents.java:324)
     at com.sap.engine.services.servlets_jsp.server.deploy.ApplicationThreadInitializer.loadServlets(ApplicationThreadInitializer.java:977)
     at com.sap.engine.services.servlets_jsp.server.deploy.ApplicationThreadInitializer.run(ApplicationThreadInitializer.java:288)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:182)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:280)
#2.0 #2010 10 08 08:25:14:987#+0200#Info#com.sap.me.trace#
##sap.com/meear#1CC1DE01D044001900000000000006EC#1674450000001163#sap.com/meear#com.sap.me.trace.VM#Guest#0##BAB53AFBD2A411DFA501000000198CD2#bab53afbd2a411dfa501000000198cd2#bab53afbd2a411dfa501000000198cd2#0#Application [18]#Plain##
SAP Manufacturing Execution Base 5.2.4.4 11 112868#
#2.0 #2010 10 08 08:26:35:096#+0200#Error#com.sap.me.trace#
##sap.com/meear#1CC1DE01D044001A00000000000006EC#1674450000000004#sap.com/meear#com.sap.me.trace#Guest#0##AF1CFA4DD2A411DF9F991CC1DE01D044#af1cfa4dd2a411df9f991cc1de01d044#af1cfa4dd2a411df9f991cc1de01d044#0#Thread[HTTP Worker [@1499959050],5,Dedicated_Application_Thread]#Plain##
The Login ID is missing.#
#2.0 #2010 10 08 08:26:35:112#+0200#Error#com.sap.me.trace#
##sap.com/meear#1CC1DE01D044001A00000001000006EC#1674450000000004#sap.com/meear#com.sap.me.trace#Guest#0##AF1CFA4DD2A411DF9F991CC1DE01D044#af1cfa4dd2a411df9f991cc1de01d044#af1cfa4dd2a411df9f991cc1de01d044#0#Thread[HTTP Worker [@1499959050],5,Dedicated_Application_Thread]#Plain##
Login module exception. com.sap.me.frame.security.loginmodules.common.MfgLoginException: null#
Br,
Johan

Stock not getting updated after confirmation of order

dear all
In our scenario x is final product.x1( semifinished),x2(spare) are dependent materials for final product. x1 has bom r1 and r2 (raw materials).I put all x1,x2,r1,r2 stock available in storage.
To get final product , only final assy of above materials by labour.PIR (md61) created for x and planning run.After planning run, planned order generated for x and converted in to production order and released.
My requirement is on confirmation of production order, backflushing of dependent materials as per bom should be done.
On confirmation of order in co15,saved.But, stock is not getting updated.what might be the reason? please give me some solution

Hi
1.Set the Back Flush Indicator in your Material Master for the components. ( You can do this in Work center and Production Order too )
2. You can also set the flag for the field " All Components" in Order Confirmation Parameters (OPK4).
3. If you want to post the Fert also at the time of confirmation use the Control Key which has " Auto GR" enabled.
While confirming the Order press the Button "Goods Movement" to ensure that the components are present there for the movement.
Regards
Krishna
Regards
Krishna

File not found error after log on to ADF application

Hi
I just took over an ADF application, after clicking on log in button, in the application_log, there is always a login.jspx -- file not found error message, the directory is not even exist. somehow the application had 'registered ' an directory for the login page, common\skin\login.jspx, the actural log in page is under common\login.jspx.
there is a loginfilter.java created and has a entry in web.xml. the login Filter has let httpServerRequest object to know that the login file directory is ..\common\login.jspx
so why the app server would be looking at the wrong directory? how should I do to correct it?
Thanks in advance.

Hi
I just took over an ADF application, after clicking on log in button, in the application_log, there is always a login.jspx -- file not found error message, the directory is not even exist. somehow the application had 'registered ' an directory for the login page, common\skin\login.jspx, the actural log in page is under common\login.jspx.
there is a loginfilter.java created and has a entry in web.xml. the login Filter has let httpServerRequest object to know that the login file directory is ..\common\login.jspx
so why the app server would be looking at the wrong directory? how should I do to correct it?
Thanks in advance.

File not found error after database migration

Hi experts
I recently decided to create a test environment for SharePoint 2010 production server but after
attach the content database using power shell successfully I get “ file not found “ error when I try to login the top site collection
I think it’s because of customized master page in production site which I don’t know how to apply them to my new environment.I even tried to copy the master pages from cataloge throught SPD but it didnt work.
Any assistance would be greatly appreciated

HI Shahin,please try to access the site by below and let me know the result.please check the below link that gives more idea on the issue
_/_layouts/settings.aspx
/_layouts/viewlsts.aspx
/default.aspx
http://expertsharepoint.blogspot.de/2014/01/sharepoint-default-page-not-loading-by.html
Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

DC not found/updated after activation

Similar Messages

Maybe you are looking for