DC not functioning with FSMO roles
hello every body,
I have 0 DC and 01 ADC lets say that DC and ADC. both were replicating AD and working properly. few days ago the motherboard of my DC failed and we replaced with new one. and obviously NIC card was attached with M.Board which also changed. when i boot up
my DC, i see its not functioning as domain controller as i saw in server manager all FSMO roles are with red cross. i assign the ip address which it hold previous i.e 192.168.0.1. but still FSMO roles are disabled. While my only ADC is working properly with
following errors and warning in AD DS roles.
Warning on ADC:
The remote server which is the owner of a FSMO role is not responding. This server has not replicated with the FSMO role owner recently.
Error on ADC:
Log Name: Directory Service
Source: Microsoft-Windows-ActiveDirectory_DomainService
Date: 12/15/2014 11:18:07 AM
Event ID: 1863
Task Category: Replication
Level: Error
Keywords: Classic
User: ANONYMOUS LOGON
Computer: KHI-ADC.jehanpakistan.com
Description:
This is the replication status for the following directory partition on this directory server.
Directory partition:
DC=ForestDnsZones,DC=jehanpakistan,DC=com
This directory server has not received replication information from a number of directory servers within the configured latency interval.
Latency Interval (Hours):
24
Number of directory servers in all sites:
1
Number of directory servers in this site:
1
The latency interval can be modified with the following registry key.
Registry Key:
HKLM\System\CurrentControlSet\Services\NTDS\Parameters\Replicator latency error interval (hours)
To identify the directory servers by name, use the dcdiag.exe tool.
You can also use the support tool repadmin.exe to display the replication latencies of the directory servers. The command is "repadmin /showvector /latency <partition-dn>".
My DC is working properly as a System.
should i have to do something with my NIC or AD DS roles or i have to transfer FSMOs to ADC. or sieze fsmo roles of DC on ADC.
please help.
Is your DC (role holder) a DNS Server as well? I assume it is, if so open the server role properties and ensure the DNS server role shows the IP in the interface if it does not you may need to uninstall/ re-install the DNS server role (assuming it is a 2008
R2 DC or above... Also did you look at your NIC settings? Did you re-establish the exact same NIC configuration as before?
When the motherboard gets replaced and new NICS are introduced I normally look at the NIC settings and DNS Server roles... That is the Microsoft side of things. On the LAN/ WAN side of things if your network team has port security enabled on the switches
the port may be locked down due to the new MAC Address.
Similar Messages
-
I apologize in advance for the rambling novella, but I tried to include as many details ahead of time as I could.
I guess like most issues, this one's been evolving for a while, it started out with us trying to add a new member
to a replication group that's on a subnet without connectivity to the FSMO roles holder. I'll try to describe the
layout as best as I can up front.
The AD only has one domain & both the forest & domain are at 2008R2 function level. We've got two sites defined in
Sites & Services, Site A is an off-site datacenter with one associated subnet & Site B with 6 associated subnets, A-F.
The two sites are connected by a WAN link from a cable provider. Subnets E & F at Site B have no connectivity to Site A
across that WAN, only what's available through the front side of the datacenter through the public Internet. The network
engineering group involved refuses to route that WAN traffic to those two subnets & we've got no recourse against that
decision; so I'm trying to find a way to accomplish this without that if possible.
The FSMO roles holder is located at Site A. I know that I can define a Site C, add Subnets E & F to that site, & then
configure an SMTP site link between Sites A & C, but that only handles AD replication, correct? That still wouldn't allow me, for example,
to enumerate DFS namespaces from subnets E & F, or to add a fileserver on either of those subnets as a member to an existing
DFS replication group, right? Also, root scalability is enabled on all the namespace shares.
Is there a way to accomplish both of these things without transferring the FSMO roles from the original DC at Site A to, say,
the bridgehead DC at Site B?
When the infrastructure was originally setup by a former analyst, the topology was much more simple & everything was left
under the Default First Site & no sites/subnets were setup until fairly recently to resolve authentication issues on
Subnets E & F... I bring this up just to say, the FSMO roles holder has held them throughout the build out & addition of
all sorts of systems & I'm honestly not sure what, if anything, the transfer of those roles will break.
I definitely don't claim to be an expert in any of this, I'll be the first to say that I'm a work-in-progress on this AD design stuff,
I'm all for R'ing the FM, but frankly I'm dragging bottom at this point in finding the right FM. I've been digging around
on Google, forums, & TechNet for the past week or so as this has evolved, but no resolution yet.
On VMs & machines on subnets E & F when I go to DFS Management -> Namespace -> Add Namespaces to Display..., none show up
automatically & when I click Show Namespaces, after a few seconds I get "The namespaces on DOMAIN cannot be enumerated. The
specified domain either does not exist or could not be contacted". If I run a dfsutil /pktinfo, nothing shows except \sysvol
but I can access the domain-based DFS shares through Windows Explorer with the UNC path \\DOMAIN-FQDN\Share-Name then when
I run a dfsutil /pktinfo it shows all the shares that I've accessed so far.
So either I'm doing something wrong, or, for some random large, multinational company, every sunbet & fileserver one wants
to add to a DFS Namespace has to be able to contact the FSMO roles holder? Or, are those ADs broken down with a child domain
for each Site & a FSMO roles holder for that child domain is located in each site?Hi Matthew,
Unfortunately a lot of the intricacies of DFS leave my head as soon as I’m done with a particular design or troubleshooting situation but from memory, having direct connectivity to the PDC emulator for a particular domain is the key to managing domain based
DFS.
Have a read of this article for the differences between “Optimize for consistency” vs “Optimize for scalability”:
http://technet.microsoft.com/en-us/library/cc737400(v=ws.10).aspx
In brief, I’d say they mean:
In consistency mode the namespace servers always poll the PDCe for the latest and greatest information on the namespaces they are hosting.
In scalability mode the namespace servers should poll the closest DC for information on the namespaces they are hosting.
The key piece of information in that article about scalability mode is: “Updates are still made to the namespace object in Active Directory on the PDC emulator, but namespace servers do not discover those changes until the updated namespace object replicates
(using Active Directory replication) to the closest domain controller for each namespace server.”
I read that as saying you can have a server running DFS-N as long as it has connectivity to a DC but if you want to make changes, do them from a box that has direct connectivity to the PDCe. Then let AD replication float those changes out to your other DCs
where the remote DFS-N server will eventually pick them up. Give it a try and see how you get on.
That being said, you may want to double check that you have configured the most appropriate FSMO role placement in your environment's AD design:
http://technet.microsoft.com/en-us/library/cc754889(v=ws.10).aspx
And a DFS response probably wouldn’t be complete without an AskDS link:
http://blogs.technet.com/b/askds/archive/2012/07/24/common-dfsn-configuration-mistakes-and-oversights.aspx
These links may also help:
http://blogs.technet.com/b/filecab/archive/2012/08/26/dfs-namespace-scalability-considerations.aspx
http://blogs.technet.com/b/josebda/archive/2009/12/30/windows-server-dfs-namespaces-reference.aspx
http://blogs.technet.com/b/josebda/archive/2009/06/26/how-many-dfs-n-namespaces-servers-do-you-need.aspx
I hope this helps,
Mark -
My Media Keys are not functioning with iTunes 10.6.1...
My Media Keys are not functioning with iTunes 10.6.1... As i said
Keyboard: Microsoft Digital Media Keyboard 3000
I've actually had this issue since like what, 10.4? I've tried that dll fix thing and that does nothing. Any help out there so I can play my music without having to leave the micro player popped up all the time?And included on the retail sales box.
http://www.apple.com/iphone/specs.html
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.7 or later (free download from www.itunes.com/download) -
I've installed Firefox 6.0 about 3 times and each time I noticed that the status bar at the bottom of the page was missing. I relied upon the Norton Security "lock icon" which in version 3.6 would appear in the lower right hand corner of the status bar before signing in to websites or making transactions and found it very helpful. It was present in version 3.6 but not in 6.0. When I went back to 3.6 I suddenly had problems with the page freezing up so returned to 6.0 which corrected the problem but was not comfortable without the icon. I contacted Norton and via remote access the tech determined that the problem exists with Firefox's 6.0 version so he reinstalled 3.6 for me. Also I have a paid subscription to Real player Plus and it does not function with 6.0. I'm concerned because it seems you will soon phase out 3.6 and I will be without these functions which are important to me.
I have a solution! Follow this link and download the older version. When I installed it, everything came back as it was before! Yay! Good luck to you all. And bad move, Mozilla, in not making it clearer what the system requirements were for the update!!!!
http://www.macupdate.com/app/mac/10700/firefox -
I just noticed that my code(in my blog site), which is a ordinary code that allows image to turn into its grayscale form and hover its original color, is not functioning with Mozilla Firefox browser. But with other browsers, it's working. I hope you can help me with this little issue. Thank you!
Does it use a CSS rule similar to:
filter: grayscale(100%)
This property is not yet implemented in Firefox. It is scheduled to be implemented in Firefox 34, according to https://developer.mozilla.org/en-US/docs/Web/CSS/filter -
Some hyperlinks do not function with FF 29.0.1 vista
OS VISTA
Firefox ver. 29.0.1
Some links on some websites (eg. www.change.org) do not respond when clicked. (Others do.)
Some objects on these pages do not function (eg. "thermometer" progress bar and "Sign" button)
Pages work under Internet Explorer. (copy from FF address bar to IE address bar)
Site used to work under FF 28. Site did not work with FF 29.0.
Still using same add-ons as with FF 28 except added The Add-on Bar.
No prefs changed.
OS fully up to date.
Adobe software fully up to date.The sign button appears, but it isn't active for 30 seconds, at least in my test. The page loads scripts from several additional sites during that process.
To determine whether any of your extensions is involved, could you test some of the problem sites in Firefox's Safe Mode? That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
You can restart Firefox in Safe Mode using either:
* "3-bar" menu button > "?" button > Restart with Add-ons Disabled
* Help menu > Restart with Add-ons Disabled
Not all add-ons are disabled: Flash and other plugins still run
After Firefox shuts down, a small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
Any difference? -
Shift and CMD keys not functioning with other keys
System Specs:
15-inch, Early 2011
Processor 2.2 GHz Intel Core i7
Memory 16 GB 1333 MHz DDR3
Software OS X 10.8.5 (12F37)
Hello,
My issue is with the keybaord of my Macbook Pro. Just yesterday I noticed the following problems with my keyboard.
Error Issue:
Right Shift key+D
Right Shift key+C
Right Shift key+E
Left CMD+C
Are all not functioning. I don't know what happened, I ran the keyboard viewer and tested all these keys out, the weird thing is that I can use the alternate keys on right and left, like shift and CMD.
Please help your urgent feedback is appreciated.I suggest trying the following (check after each step):
1) Reboot
2) Reset PRAM using this procedure: http://support.apple.com/kb/HT1379
3) Reset the SMC: http://support.apple.com/kb/ht3964
4) check in a different user space (maybe it's a preferences problem)
5) take to Apple store -
Double Click Property Node not functioning with Queued State Machine
I am writing an application which relies on input from the operator to start different steps in a process of steps. I am using a queued state machine, however I cannot get the Double-Click property of my listbox to function with in this Queued state machine. I have tried Creating a refrence to the Listbox and creating a property node from that refrence. I have tried a property node of the control. The double click functon works only if the queueing is not occuring. It has something to do with the queue but I am at a loss as to what is causing it. Any help would be GREATLY appreciated. I have attached a simplified version of the state machine with the double click function. Thanks for any help on this. It is written in LV7.1
Attachments:
Test Q.llb 55 KBHi
Its Simple....
Your Properrty node is not getting read..... dont understand how..
see the attachment...
now laugh at your small mistake... (even i have the habbit of making such small mistakes ;-) )
Message Edited by Tushar Jambhekar on 01-11-2006 11:38 AM
Tushar Jambhekar
[email protected]
Jambhekar Automation Solutions
LabVIEW Consultancy, LabVIEW Training
Rent a LabVIEW Developer, My Blog
Attachments:
Test Q.llb 55 KB
Picture.JPG 44 KB -
Mitigation runs against role but not user with same role assignment
Hello, I'm currently running Compliance Calibrator 4.0. I've created a Mitigation Control and assigned a number of Risks to the Mitigation Control.
I've then assigned the Risks in that Mitigation Control to a specific role.
When I run the SoD check, the role no longer shows any issues. This is good and expected.
However, when I run the SoD against a user that has that role assigned the user is reported with issues when no SoD issues should be shown.
Am I missing something? I don't believe I need to assign Mitigation Control to the user, because one day the risk might be valid to that user, but just not for the role I'm trying to mitigate against. Many thanks.Hi Dylan, the system is reacting correctly.
When you mitigate a role, you mitigate the risk associated with the role and under 'Role Analysis' you will see that this role has been mitigated.
However when u run a User analysis, the system will still identify him if there is a 'RISK' associated with the user and this is regardless of whether the associated Role is mitigated or not because what you want to know is the risk of the user and not what roles this user has.
You will need to specifically mitigate the User in order for the mitigation control to show against the User in the report.
This is the same Vice Versa. when you mitigate a User, it also does not mean that all the associated Roles that the user have are mitigated. The risk associated with the roles will still appear when you do 'Role Analysis'
Cheers! -
Hi, I am SK Chew,My soundbooth is not function after few months not used and with an error code "NV_OGL" and the statement is "soundbooth could not find any capable playback modules". and my pc is working in good condition. any one can help me?
Quicktime errors http://forums.adobe.com/message/4545437 may help
Or, not exactly the same, but MAY be related
ExporterQuickTimeHost QT Version http://forums.adobe.com/thread/1109614 -
Does M-audios project mix I/O not function with Logic express 7.2 ?
I am having lots of problems getting this working, and it suddenly occurs to me that this equipment may not work with the Express version. Anyone know?
Scott,
You bring music to my ears. A few questions (I'm sold at this point, just want these questions answered for sugar coating, I guess):
1.) Does the Project Mix communicate effectively with Logic's 'MIDI Learn' feature? I tried utilizing this with M-Audio's Trigger Finger, but the Finger (or Logic, can't tell which) did not lock on to the assignment. Having any trouble with this?
2.) Are there memory banks and is it easy to save all settings at any given point to certain bank? Ideally I'd like to have a different memory bank for each song, so an extensive inventory of blank memory would be very useful.
3.) How's the LCD Screen? Really awesome or uncommunicative with the user (as in, do the abbreviations make it difficult to read, or is it fairly intuitive?)
Thanks a lot. And Stash, your words are tight, too. -
PCI-4472 not functioning with DAQmx Linux 8.0
We have multiple systems with PCI-4472 cards in them running SUSE Linux, and all but one of them function properly. On the particular system in question (which has identical hardware and software to the functioning systems), nilsdev lists no devices. Further investigation revealed the following excerpt from dmesg:
allocation failed: out of vmalloc space - use
vmalloc=<size> to increase size.
Unable to handle kernel NULL pointer dereference at virtual address
000002fc
printing eip:
f9ede608
*pde = 00000000
Oops: 0002 [#1]
SMP
Modules linked in: nidsark nistcrk nicdrk nistc2k nimru2k nimxpk ipt_pkttype
ipt_LOG ipt_limit nipxirmk nidimk nimsdrk nidmxfk nimxdfk nimstsk nimdbgk
niorbk speedstep_lib freq_table nipalk nikal snd_pcm_oss snd_mixer_oss snd_seq
snd_seq_device button battery ac af_packet video1394 raw1394 edd ide_cd cdrom
sk98lin ohci1394 ieee1394 snd_intel8x0 snd_ac97_codec snd_ac97_bus snd_pcm
snd_timer snd soundcore snd_page_alloc i2c_i801 i2c_core hw_random generic
ehci_hcd intel_agp agpgart uhci_hcd usbcore shpchp pci_hotplug ip6t_REJECT
ipt_REJECT ipt_state iptable_mangle iptable_nat iptable_filter ip6table_mangle
ip_conntrack ip_tables ip6table_filter ip6_tables ipv6 parport_pc lp parport
nls_iso8859_1 nls_cp437 vfat fat nls_utf8 ntfs dm_mod ext3 jbd sg fan thermal
processor ata_piix libata piix sd_mod scsi_mod ide_disk ide_core
CPU: 1
EIP: 0060:[<f9ede608>] Tainted: PF U VLI
EFLAGS: 00010246 (2.6.13-15-smp)
EIP is at nidsark-unversioned0004550+0x70/0x11e4 [nidsark]
eax: 00000000 ebx: f6be1d68 ecx: 00000000 edx: 00000000
esi: f6514770 edi: f6514760 ebp: f6be1964 esp: f6be1958
ds: 007b es: 007b ss: 0068
Process nipalsm (pid: 6952, threadinfo=f6be0000 task=c2344540)
Stack: f6be1d68 f6514b68 f6be1d68 f6be197c f9efb4d0 f6514760 f6be1d68 f6514b68
f6b82690 f6be1a1c f9e93409
f6514b68 f6be1d68 f6514760 f6be1d68 00000004
f6be1d6c 00000100 f6be19b8
f95bbf19 f6be1bd0 f6be1d6c f6be1d6c f6be1b98
Assuming that the NULL pointer deference was caused by the preceding failed vmalloc, I attempted to increase the vmalloc size to 512MB (which is certainly overkill). This did nothing to clear the error. One final detail is that this computer dual boots Windows, while the others have only ever run Linux. It shouldn't matter, but I feel it is worth mentioning in the event that DAQmx for Windows somehow mangles the configuration of the card to a point where it no longer functions with DAQmx for Linux. It should be noted that the card works just fine under Windows.
I have the output from niSystemReport available in the event that it will help in diagnosing the problem, but am unable to attach it due to the size restriction of this forum. The call trace from dmesg is in the attached file. Any help would be greatly appreciated.
-Peter Lisherness
Message Edited by PeterLisherness on 07-10-2006 12:36 PM
Attachments:
dmesg.txt 5 KBPeter,
I have a couple of other questions which might help us narrow this down.
1. You said both the working and non working machines have identical hardware and software. I'm assuming this means both machines are Pentium 4 3.2 GHz SMP machines 2 GB of RAM, have the same motherboards etc. I also assume that this means that they also are both running SUSE 10.0 and have the same updates, and kernel versions. Is this correct? A system report from the working machine could also help us confirm this.
2. Can you easily reproduce the Oops? When does it occur? Does it happen when the machine first boots up, or do you have to run nilsdev first?
Thanks,
Shawn B.
Use NI products on Linux? Come join the NI Linux Users Community -
Troubleshooting MB110LL/A keyboard not functioning with macbook
Purchased the keyboard used - my first mistake, I'll admit - and the seller wants me to troubleshoot the keyboard before accepting a return/refund.
What can I try?Half the keys do not produce characters on screen. They simply do not function. I've attempted connecting it to multiple ports on my macbook as well as my cinema display to no effect.
I can attempt to plug it into a windows computer, but I do not have a second mac to test it on. As it's a usb keyboard, this should be sufficient to test, right? -
Service Desk messages not visible with SAP_SUPPDESK_ADMIN Role
Hi,
We are configuring Service Desk in Solution Manager 7.0 Ehp1.
I am able to see the support messages from the user 'BASIS' with SAP_ALL authorization.
There is another user 'X'. Here User 'X' has following Roles - SAP_SUPPDESK_ADMIN, SAP_SUPPDESK_CREATE, SAP_SUPPDESK_PROCESS, SAP_SUPPDESK_DISPLAY, SAP_SUPPCF_ADMIN, SAP_SUPPCF_PROCESS, SAP_SUPPCF_DISP.
After this I set the message processor to be user 'X'.
Now when I try to see the message with T-code: crm_dno_monitor, it is not displaying any messages.
But as per the Solman Security Guide, SAP_SUPPDESK_ADMIN and SAP_SUPPCF_ADMIN are master roles for Service Desk.
Please help in resolving the issue.Hi,
Do you mean you logon to the system as user X, and create a test message under user X, and not able to see the message
created ?
Are you able to see in SOLMAN_WORKCENTER ?
Regards,
Vincent -
Installed a new Windows PC on my home network. PC is Windows 8/64bit. with latest version of itunes 11.1.4.62 for 64bit. My itunes works, but I can not get Home Sharing to function now. None of my Apple TV's can see my computer library and prompt me to turn it on. All of my iphones, pods, pad, can not use the "Remote" app. When you prompt your phone in Remote App to "add library" and you get the code....iTunes doesnt give you the remote screen where you can enter the code. I have reloaded iTunes, reset my router, updated all devices. You can turn on "Home Sharing" on iTunes, but then it closes and doesnt seem to link my devices like it use to. Also, when the new version of iTunes is up on my PC, you can see the other devices to AirPlay to like you could before. However, I can send items from my iphone to stream to an Apple TV, I just cant link them all like I could before and control the music playing to multiple Apple TV. Growing fustrated. Any ideas, would be helpful.
Cunning1_
You are a legend!! I have spent countless hours uninstalling, reinstalling itunes, playing with firewall settings, reading articles on this problem!! I only have to un-sync my iphone 5 and then the airplay icon magically appeared!!! Maybe I have too many devices syncing via wi-fi, or maybe it is the Iphone syncing??
Whatever - one step and now I can enjoy my music through my house again!
Thank you, Thank you, Thank you
Maybe you are looking for
-
I installed Mountain Lion OS on my Mac Book Pro and now WORD for Mac and Fluenz Spanish program do not work. How do I reinstall original OS and scrap ML? Thanks
-
Restriction of posting of parking vendors in tcode fv60
Hi Gurus, How can we restrict posting of parking vendors in transaction code FV60 by disbleing the menu item. Thanks in Advance. shiva.
-
"LOADING " FREEZES when I try to open any email BUT ONLY ON FIREFOX
WHENEVER I TRY TO USE FIREFOX THE WORD "LOADING" APPEARS AT THE TOP OF THE PAGE AND FREEZES THERE. I AM THEN FORCED TO GO TO GOOGLE CHROME TO READ MY MAIL?? == This happened == Every time Firefox opened == A week ago and has gotten worse == == User A
-
AppStore does not load completely
my AppStore does not load completely ipad4 btw.....I tried changing account and Internet connection but still does not work
-
Unable to make Windows recovery disk - HP Envy 15 - Windows 8.1
While Windows is booting well, it seems I have to do a recovery. On booting and pressing F11I get the message Your PC needs to be repaired. A required device isn't connected or can't be accessed. Error code 0xc0000225 On the other side when I try in