[DC2] An net use or LsaPolicy operation failed with error 67 - Moving AD from 2003R2 to Server 2012
Hello, i hope someone can help me with this tricky situation.
The plan is to move AD from 2003R2 name "DC" to a server 2012 "DC2"
I have made all the adjustments and transferred all the role to the new 2012 server, and both are now GC servers.
The problem is "transferring" the netlogon share.
in DCDIAg on the new server i get:
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = DC2
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\DC2
Starting test: Connectivity
......................... DC2 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\DC2
Starting test: Advertising
......................... DC2 passed test Advertising
Starting test: FrsEvent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
......................... DC2 passed test FrsEvent
Starting test: DFSREvent
......................... DC2 passed test DFSREvent
Starting test: SysVolCheck
......................... DC2 passed test SysVolCheck
Starting test: KccEvent
......................... DC2 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... DC2 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... DC2 passed test MachineAccount
Starting test: NCSecDesc
......................... DC2 passed test NCSecDesc
Starting test: NetLogons
Unable to connect to the NETLOGON share! (\\DC2\netlogon)
[DC2] An net use or LsaPolicy operation failed with error 67,
The network name cannot be found..
......................... DC2 failed test NetLogons
Starting test: ObjectsReplicated
......................... DC2 passed test ObjectsReplicated
Starting test: Replications
......................... DC2 passed test Replications
Starting test: RidManager
......................... DC2 passed test RidManager
Starting test: Services
NtFrs Service is stopped on [DC2]
......................... DC2 failed test Services
Starting test: SystemLog
......................... DC2 passed test SystemLog
Starting test: VerifyReferences
......................... DC2 passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : dom1
Starting test: CheckSDRefDom
......................... domain passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... domain passed test CrossRefValidation
Running enterprise tests on : domain.xxxxx.no
Starting test: LocatorCheck
......................... domain.xxxxx.no passed test LocatorCheck
Starting test: Intersite
......................... domain.xxxx.no passed test Intersite
I have as a last option the burflags issue, i tried this with the option D2, but i think i have done it wrong, because the netlogon share is gone on the old DC. i took a backup of the files and folders before
i did this. http://support.microsoft.com/kb/290762/en-us But i am a little confused on which server i am going to set the D4 value on now? COuld someone help? Best regards Aksel
Hello Dirk
And thank you for your answer, in regards of the KB, do i have to follow the steps regarding:
Global vs. replica set specific reinitialization
You can locate the replica set specific
BurFlags
registry key by determining the GUID for the replica set that you want to configure. To determine which GUID
corresponds to which replica set and configure a restore, follow these steps:
Click Start, and then click Run.
In the Open box, type cmd and then press ENTER.
In the Command box, type net stop ntfrs.
Click Start, and then click Run.
In the Open box, type regedit and then press ENTER.
To determine the GUID that represents the replica set that you want to configure, follow these steps:
Locate the following key in the registry:
KEY_LOCAL_MACHINE\System\CurrentControlSet\Services\NtFrs\Parameters\Replica Sets
Below the Replica Sets subkey, there are one or more subkeys that are identified by a GUID. In the left pane, click the GUID, and then in the right
pane note the Data that is listed for the Replica Set Root value. This file system path will indicate which replica set is represented by this GUID.
Repeat step 4 for each GUID that is listed below the Replica Sets
And so on?
I have only thos 2 DC's in the network...
Similar Messages
-
Hi,
I'm using Project Server 2013 and I'm not able to publish a workflow in SharePoint Designer 2013, I get this error:
System.InvalidOperationException: Operation failed with error Microsoft.Workflow.Client.ScopeInactiveException: Scope '/SharePoint/default/d7feb9ea-ccb2-4ec3-8f89-2a45b6cf3777' is not in an active state. Its current
state is 'Unregistering'. HTTP headers received from the server - ActivityId: c47ef567-8c54-4ae0-9a1a-1e4fb51320d8. NodeId: TestServer. Scope: /SharePoint/default/d7feb9ea-ccb2-4ec3-8f89-2a45b6cf3777. Client ActivityId : c6e5979c-20f8-e042-1f9d-2cb2a25d7f9e.
---> System.Net.WebExceptio
The thing is that I transferred the databases from a Prod.Env. to the Test Env. and from that moment on the Test Env. stopped working (only workflows), then I
was thinking that maybe the workflow is not working in the Test Environment because when I transferred the databases from Prod Env to Test Env I didn’t transfer the databases related to workflow, I only transferred:
WSS_Content
PWA_ServiceDB
But I didn’t transfer:
SBGatewayDatabase
SBManagementDB
SBMessageContainer01
WFInstanceManagementDB
WFManagementDB
WFResourceManagementDB
I didn’t transfer them because, before, when I transferred DB’s in version 2010, these DB’s were not needed, as the workflows were done using another method.
So, I tried to create a new workflow in the Test Env. but there is no way, I always get that error.
I've tried to Register again the workflow, and the result looks ok, but it doesn't solve the problem:
Register-SPWorkflowService
–SPSite "http://whatever/PWA"
–WorkflowHostUri "http://TestServer:12291"
–AllowOAuthHttp -Force
Do you know how to solve this issue or have an idea to give me some light?
Thank you for your help and regards,
José EspasesLooks like you haven't defined the WF scope or the site where you are trying to deploy the workflow to isn't included in the scope
Check this article
http://fangdahai.blogspot.in/2013/04/on-premise-windows-workflow-server.html
Thanks | epmXperts | http://epmxperts.wordpress.com -
I created application using JDeveloper 11g, and have the deploy file EAR read to deploy to oracle application server 10g, but I am encouting the error of Operation failed with error: java:/app/jdbc/jdbc/HRConnDS not found
Below is the log. What did i do wrong? I have created the datasource of HRConnDS, and it shows in EM.
Nov 6, 2009 10:06:12 AM] Application Deployer for hra1 STARTS.
[Nov 6, 2009 10:06:12 AM] Copy the archive to /u01/OraHome_app1/j2ee/home/applications/hra1.ear
[Nov 6, 2009 10:06:12 AM] Initialize /u01/OraHome_app1/j2ee/home/applications/hra1.ear begins...
[Nov 6, 2009 10:06:12 AM] Unpacking hra1.ear
[Nov 6, 2009 10:06:12 AM] Done unpacking hra1.ear
[Nov 6, 2009 10:06:12 AM] Unpacking webapp2.war
[Nov 6, 2009 10:06:12 AM] Done unpacking webapp2.war
[Nov 6, 2009 10:06:12 AM] Initialize /u01/OraHome_app1/j2ee/home/applications/hra1.ear ends...
[Nov 6, 2009 10:06:12 AM] Starting application : hra1
[Nov 6, 2009 10:06:12 AM] Initializing ClassLoader(s)
[Nov 6, 2009 10:06:12 AM] Initializing EJB container
[Nov 6, 2009 10:06:12 AM] Loading connector(s)
[Nov 6, 2009 10:06:12 AM] Starting up resource adapters
[Nov 6, 2009 10:06:12 AM] application : hra1 is in failed state
[Nov 6, 2009 10:06:12 AM] Operation failed with error: java:/app/jdbc/jdbc/HRConnDS not found
Thank you very much for your help.How did you create your datasource, can you post the content, without passwords of course.
Greetings. -
Wanboot using s10u3 and http fails with error 416 with a small(ish) flar
Hi,
Using S10 u3 (11/06) to provision a wanboot server fails
with a 1.4Gb flash image -- output at foot. The flar is there,
perms 644, and I can open it in a web browser. The serverside
log in /tmp/bootlog.HOST gives the same information.
At OpenSolaris.org, this thread
http://www.opensolaris.org/jive/thread.jspa?messageID=82856
mentions a known bug 6509337 s10s_u3 wanboot fails but
like another user of opensolaris, I cannot find that bug -- nor
does searching sunsolve for wanboot 416 give any hits.
Has anyone but the 3 folk at opensolaris and I seen this?
Thank you for your time
Using rules.ok from http://10.23.0.49/config.
Checking rules.ok file...
Using profile: profile
Executing JumpStart preinstall phase...
Searching for SolStart directory...
Checking rules.ok file...
Using begin script: install_begin
Using finish script: patch_finish
Executing SolStart preinstall phase...
Executing begin script "install_begin"...
Begin script install_begin execution completed.
Wed Jan 31 14:10:56 wanboot info: WAN boot messages->10.23.0.49:80
Processing profile
- Opening Flash archive
ERROR: Unable to access the archive. The server returned 416: Requested Range Not Satisfiable
ERROR: Could not read file (http://10.23.0.49:80/flash/s10.flar)
ERROR: Flash installation failed
Solaris installation program exited.Hi,
Using S10 u3 (11/06) to provision a wanboot server
fails
with a 1.4Gb flash image -- output at foot. The flar
is there,
perms 644, and I can open it in a web browser. The
serverside
log in /tmp/bootlog.HOST gives the same
information.
At OpenSolaris.org, this thread
http://www.opensolaris.org/jive/thread.jspa?messageID=
82856
mentions a known bug 6509337 s10s_u3 wanboot fails
but
like another user of opensolaris, I cannot find that
bug -- nor
does searching sunsolve for wanboot 416 give any
hits.
Has anyone but the 3 folk at opensolaris and I seen
this?
Thank you for your time
Using rules.ok from http://10.23.0.49/config.
Checking rules.ok file...
Using profile: profile
Executing JumpStart preinstall phase...
Searching for SolStart directory...
Checking rules.ok file...
Using begin script: install_begin
Using finish script: patch_finish
Executing SolStart preinstall phase...
Executing begin script "install_begin"...
Begin script install_begin execution completed.
Wed Jan 31 14:10:56 wanboot info: WAN boot
messages->10.23.0.49:80
Processing profile
- Opening Flash archive
Unable to access the archive. The server returned
416: Requested Range Not Satisfiable
ERROR: Could not read file
(http://10.23.0.49:80/flash/s10.flar)
ERROR: Flash installation failed
Solaris installation program exited.Same here:
Processing profile
- Opening Flash archive
ERROR: Unable to access the archive. The server returned 416: Requested Range Not Satisfiable
ERROR: Could not read file (http://199.17.241.103:80/wanboot/flar/flars/flar.sun4v.sol10_11_06.2)
ERROR: Flash installation failed
Solaris installation program exited.
Web server error log is clean, but access log contains the following:
199.17.247.252 - - [02/Feb/2007:21:35:31 -0600] "GET /cgi-bin/wanboot-cgi/?CONTENT=bootfile&IP=199.17.247.128&CID=0100144F0ED53C HTTP/1.1" 200 1087128 "-" "-"
199.17.247.252 - - [02/Feb/2007:21:35:40 -0600] "GET /cgi-bin/wanboot-cgi/?CONTENT=bootfs&IP=199.17.247.128&CID=0100144F0ED53C&NONCE=80E23BAF0AE7E91E0B8141E0B7B66323A300C4A6 HTTP/1.1" 200 379111 "-" "-"
199.17.247.252 - - [02/Feb/2007:21:35:42 -0600] "GET /cgi-bin/wanboot-cgi/?CONTENT=rootfs&IP=199.17.247.128&CID=0100144F0ED53C HTTP/1.1" 200 235 "-" "-"
199.17.247.252 - - [02/Feb/2007:21:35:42 -0600] "GET /wanboot/miniroot/miniroot.sun4v_sol10_11_06 HTTP/1.1" 200 273847296 "-" "-"
199.17.247.252 - - [02/Feb/2007:21:38:57 -0600] "HEAD /wanboot/flar/sysidcfg.patrick/sysidcfg HTTP/1.1" 200 - "-" "-"
199.17.247.252 - - [02/Feb/2007:21:38:57 -0600] "GET /wanboot/flar/sysidcfg.patrick/sysidcfg HTTP/1.1" 206 687 "-" "-"
199.17.247.252 - - [02/Feb/2007:21:43:27 -0600] "HEAD /wanboot/flar/rules.ok HTTP/1.1" 200 - "-" "-"
199.17.247.252 - - [02/Feb/2007:21:43:27 -0600] "GET /wanboot/flar/rules.ok HTTP/1.1" 206 341 "-" "-"
199.17.247.252 - - [02/Feb/2007:21:43:28 -0600] "HEAD /wanboot/flar/mybegin HTTP/1.1" 200 - "-" "-"
199.17.247.252 - - [02/Feb/2007:21:43:28 -0600] "GET /wanboot/flar/mybegin HTTP/1.1" 206 715 "-" "-"
199.17.247.252 - - [02/Feb/2007:21:43:28 -0600] "HEAD /wanboot/flar/profile.sol10_T2000_72g.0 HTTP/1.1" 200 - "-" "-"
199.17.247.252 - - [02/Feb/2007:21:43:28 -0600] "GET /wanboot/flar/profile.sol10_T2000_72g.0 HTTP/1.1" 206 501 "-" "-"
199.17.247.252 - - [02/Feb/2007:21:43:29 -0600] "HEAD /wanboot/flar/flars/flar.sun4v.sol10_11_06.2 HTTP/1.1" 200 - "-" "-"
199.17.247.252 - - [02/Feb/2007:21:43:29 -0600] "GET /wanboot/flar/flars/flar.sun4v.sol10_11_06.2 HTTP/1.1" 416 392 "-" "-"
showrev: Kernel version: SunOS 5.10 Generic_118833-33 -
Can I install net framework 3.5 on a client Windows 8.1 from a Windows Server 2012 R2
I have been trying to install a Windows Feature to a client computer on a LAN from my Windows Server.
The feature that i'm trying to install is .NET Framework 3.5 on a client with Windows 8.1
I have been looking for information on the web to see if is it possible to install the feature from my server (WS2012R2) and I have not found anything yet.
- The Server and the Client are located on the same subnet.
- The Server and the Client are virtualized because I've been doing different tests.
- I just need to install the feature on some clients, not in all of them.
Do I need to apply any policy?
Do I need any special command?
Is this request possible?This one may help.
Installing the .NET Framework 3.5 on Windows 8 or 8.1
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
DCDIAG Result A net user or LsaPolicy failed with error 67
I have looked through all the similar posts and have ran an Authoritative and UnAthroativte process. This allowed my SYSVOL to replicate and come back. I still keep getting this error on the one DC. Everything else passes fine. I am pulling my hair out
if anyone has had this problem please help. Also this is a Server 2012 R2 DCHi Mike,
Before going further, how did you do the Sysvol restore? What’s our Sysvol replication mechanism, FRS or DFSR?
If our Sysvol replication mechanism is FRS, we need to do an authoritative (D4) restore on a healthy DC and non-authoritative (D2) restore on other DCs.
Regarding this point, the following thread and article can be referred to for more information.
[DC2] An net use or LsaPolicy operation failed with error 67 - Moving AD from 2003R2 to Server 2012
http://social.technet.microsoft.com/Forums/en-US/401f7023-9ef1-4dc7-94f4-f59a74b49d65/dc2-an-net-use-or-lsapolicy-operation-failed-with-error-67-moving-ad-from-2003r2-to-server-2012?forum=winserverDS
Using the BurFlags registry key to reinitialize File Replication Service replica sets
http://support.microsoft.com/kb/290762/en-us
If our Sysvol replication mechanism is DFSR, we can follow the article below to do the Sysvol restore.
How to force an authoritative and non-authoritative synchronization for DFSR-replicated SYSVOL (like "D4/D2" for FRS)
http://support.microsoft.com/kb/2218556/en-us
Best regards,
Frank Shen -
Trying to assign Security Baseline fails with error 24001
We are trying to assign the Sample Security baseline updates to a cluster group in VMM.
We have followed the steps here
http://technet.microsoft.com/en-us/library/gg675110.aspx
But the job to assign the baseline fails with the following:-
Error 24001
Update server operation failed with error: The specified item could not be found in the database.
We are running VMM 2012R2 V 3.2.7510.0 on Windows Server 2012R2Remove wsus from VMM and add it again.
This will fix the problem. Otherwise I Think cleaning SQL of missing update fixes the problem. -
When using Microsoft Backup on a Windows Server 2008 SP2 (not R2 - [Microsoft version 6.0.6002]) I get the error "The creation of the shadow copy on the backup destination has failed. Detailed Error: The Volume Shadow Copy operation failed with the
error 0x80042316"
The odd thing is that when I start the backup manually, it works fine. When it runs automatically the error appears.
When doing a SFC /scannow I do get errors that can't be corrected.
Is there anything short of rebuilding this machine (It's a DC and the only one this office has) I can do to fix this?Hi,
0x80042316 means "Another shadow copy creation is already in progress". This error could occur when another VSS instance is running.
Is there any third party backup application installed? Try to uninstall it to see the result. And please also check if there is another backup schedule which causes the conflict.
Meanwhile please provide the result of:
vssadmin list providers
vssadmin list writers
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected].
Hi,
I do have Crashplan ProE running. It started at 1900 and the Windows Backup starts at 2000. I have modified Crashplan not to start until 2300 to see if that helps.
Also:
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2005 Microsoft Corp.
Provider name: 'Microsoft Software Shadow Copy provider 1.0'
Provider type: System
Provider Id: {b5946137-7b9f-4925-af80-51abd60b20d5}
Version: 1.0.0.7
AND:
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2005 Microsoft Corp.
Writer name: 'System Writer'
Writer Id: {e8132975-6f93-4464-a53e-1050253ae220}
Writer Instance Id: {f0c7ee55-5885-4894-8dd3-14fffbdd4d2e}
State: [1] Stable
Last error: No error
Writer name: 'SqlServerWriter'
Writer Id: {a65faa63-5ea8-4ebc-9dbd-a0c4db26912a}
Writer Instance Id: {017a0133-7577-4322-b513-04f72404b70a}
State: [1] Stable
Last error: No error
Writer name: 'ASR Writer'
Writer Id: {be000cbe-11fe-4426-9c58-531aa6355fc4}
Writer Instance Id: {6b17d670-9ea8-4ff1-a59e-b474f4b893db}
State: [1] Stable
Last error: No error
Writer name: 'Shadow Copy Optimization Writer'
Writer Id: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f}
Writer Instance Id: {56aad1bf-9bf1-4fde-b2f4-a706577c632d}
State: [1] Stable
Last error: No error
Writer name: 'COM+ REGDB Writer'
Writer Id: {542da469-d3e1-473c-9f4f-7847f01fc64f}
Writer Instance Id: {e942d09d-276e-450a-9bf4-b1d5abe6af8a}
State: [1] Stable
Last error: No error
Writer name: 'Registry Writer'
Writer Id: {afbab4a2-367d-4d15-a586-71dbb18f8485}
Writer Instance Id: {3737164b-61ac-454c-b1f7-42f2620f10db}
State: [1] Stable
Last error: No error
Writer name: 'DFS Replication service writer'
Writer Id: {2707761b-2324-473d-88eb-eb007a359533}
Writer Instance Id: {39458257-aca4-481e-a302-994f3eb1e9a3}
State: [1] Stable
Last error: No error
Writer name: 'Dhcp Jet Writer'
Writer Id: {be9ac81e-3619-421f-920f-4c6fea9e93ad}
Writer Instance Id: {6a8ab4aa-760c-4102-a27f-58f570c9c572}
State: [1] Stable
Last error: No error
Writer name: 'NTDS'
Writer Id: {b2014c9e-8711-4c5c-a5a9-3cf384484757}
Writer Instance Id: {53577013-8397-448e-9a25-c7cac08aa0a8}
State: [1] Stable
Last error: No error
Writer name: 'IIS Metabase Writer'
Writer Id: {59b1f0cf-90ef-465f-9609-6ca8b2938366}
Writer Instance Id: {ee2c9173-92e7-455c-8f73-601647c0ddb2}
State: [1] Stable
Last error: No error
Writer name: 'BITS Writer'
Writer Id: {4969d978-be47-48b0-b100-f328f07ac1e0}
Writer Instance Id: {b1f60392-9dfd-4e3a-bda6-3dc2cb622ba4}
State: [1] Stable
Last error: No error
Writer name: 'IIS Config Writer'
Writer Id: {2a40fd15-dfca-4aa8-a654-1f8c654603f6}
Writer Instance Id: {a328aede-78f0-448e-9c36-e8379e9fe2a8}
State: [1] Stable
Last error: No error
Writer name: 'WMI Writer'
Writer Id: {a6ad56c2-b509-4e6c-bb19-49d8f43532f0}
Writer Instance Id: {c39fa334-5c9d-4906-a3b5-33c3444948e6}
State: [1] Stable
Last error: No error
Writer name: 'NPS VSS Writer'
Writer Id: {35e81631-13e1-48db-97fc-d5bc721bb18a}
Writer Instance Id: {3c9c5584-b5fd-48cf-8541-0c8bfa585ca0}
State: [1] Stable
Last error: No error -
OIP-04907: LOB operation failed. Error reading or writing to file'
I wrote a VB program who read and write blob
I received this error
OIP-04907: LOB operation failed. Error reading or writing to file'
do you have an idea why
or
where Can I find some info about this error (OIP)
thanksHello SteveMRG,
What version of LabVIEW and NI DAQmx are you using? Does this error occur when the program is run from the development PC from the project? Can you create a debuggable executable and activate Highlight execution when the error occurs as to verify which state the program is in?
Wear
National Instruments
Product Support Engineer -
Installation operation failed.Unknown error (code:...
I am trying to intall the latest version of Nokia Ovi Suite 2.2.1.23 And keep getting Installation operation failed.Unknown error (code: 1612).
Have tried:-
Nokia PC Suite Cleaner
Uninstall Ovi Suite, PC Connectivity solution and Nokia Connectivity cable drivers from Add/remove program Delete the files from...
C:\Documents and Settings\User\Application Data\Nokia\Ovi Suite C:\Documents and Settings\user\Local Settings\Application Data\Nokia C:\Documents and Settings\All Users\Application Data\OviInstallerCache Used MSI clean up utility Restart PC.
Any solutions please...
using :-
Nokia 5800 XpressMusic
V50.0.005
Windows 7 (32 bit)These errors is coming up, becasue the windows installer is corrupted. Please reinstall windows installer from the link provided below.
http://support.microsoft.com/kb/2438651/en-us
This should defnitely work..
All the best and good luck.
Cheers
Show appreciation by clicking the kudos star :-), or gesture by typing thanks -
Acrobat 7 mandatory update failing with error 16820 and blocking the use of the program
Acrobat 7 mandatory update failing with error 16820 and blocking the use of the program
Sorry I can't get the screen print to upload
It says
Mandatory Update Available
A Mandatory version of this application is available for download. Application can't continue without installing this version.
Application: Acrobat_com
Installed version: 2.0.0.0
Update Version : 2.3.0.0
Download now Quit
Release notes ( this is blank)
After selecting 'Download Now' I get the following message;
Download failed
There was an error downloading the update. Error #16820
Close -
Hi All,
I get the below error when i refresh a report from smartview.
Small reports works fine but if the report is huge i get this error
Smart View Error: Requested Operation Failed. Error: Java.lang.NullPointerE
Smart View 11.1.2 MS OFFICE 2007 SP3
Essbase 11.1.2
Any pointers.
Regards,
Minkyou mean i have to set below in essbase.properties of aps
SET JAVA_OPTIONS=–Xms128m –Xmx1024m
Regards,
Mink -
I have a SSIS project that I am newly running on the SQL server (2005) . It was previously run on my PC. I am importing data from a DB2 server to the SQL server.
I am in the SA group on the server
My connection to DB2 works
When open the package and run it in preview mode, I can retrieve the data.
When I execute the package I get the below errors:
[MIDAS OLE DB Source [1]] Error: The AcquireConnection method call to the connection manager "NGMDSPA.alharris" failed with error code 0xC0202009.
[DTS.Pipeline] Error: component "MIDAS OLE DB Source" (1) failed validation and returned error code 0xC020801C.
What I have already done that has not worked:
The original Protection level was set to EncryptSensitiveWithPassword.
I have reset the Package Password.
I have set the protection level to DontSaveSensitive
I saved the package on the server and set a Package Password.
I created a new package, set the Protection level to DontSaveSensitive, set a package password in a configuration file using the Package Configuration Wizard.
Error continuesYes. The Drivers are installed and I have a successfull connection. I am trouble shooting the issue on the server in BIDS. I can connect to the DB2 server via the Connectionmanager. I can also preview the data in the OLE
DB source connection. Therefore I know that I have a proper connection
If you're setting option as DontSaveSensitive then you need to pass the connection information from configuration file/ config table. Otherwise it wont be able to use it for connecting to your source/destination servers. This is the recommended way as it
will enable you to change connection info at runtime.
If you want connection info to persist you need to use protection level as EncryptSensitiveUsingUserKey or EncryptSensitiveUsingPassword and set a password.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
I keep getting this error code when trying to download
- 0 fatal error(s), 3 error(s) ----------- Payload: Adobe Photoshop Lightroom 5 5.6.0.0 Adobe_Lightroom_x64.msi_5.6 ----------- ERROR: Key not valid for use in specified state. ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation. MSI Error message: Key not valid for use in specified state. ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1603Generally this error happens because of an encrypted folder or insufficient permissions on that folder: http://support.microsoft.com/kb/834484 (MS Explanation)
Adobe has a page here: Error 1603: A fatal error occurred during installation -
Hi,<BR>While adding/Changing member in planning it gives the error "The SQL operation failed with an error code: 0" and not allowing any of the changes. I am not able to open the forms giving the error as "Fiscal Days Input - is invalid". Interestingly one form was opening, when the Page selection is changed it also started giving error as like "Fisacal Days Input(form name) - is invalid check log for details". <BR>Pls advice us that what is this error and how to resolve this.<BR><BR>And Which log is to be referred for the details.<BR><BR>Thanks<BR>Ravi
If a form is invalid it generally means that one of the dimension references is missing.<BR><BR>Can you get in to edit the form?<BR>If you can, see if you can preview it. I suspect you will not be able to.<BR><BR>If not, check all dimension boxes have at least one member against them.<BR>If you have multiple rows and/or columns check all of them too.<BR><BR>I've had a couple of forms in dev "drop" a dimension reference but only once or twice so not enough to reproduce or find out what is causing it. Each time I got the "form invalid" error message and managed to fix it.<BR><BR>Hope this helps.<BR>
Maybe you are looking for
-
HXXCEDT0 need to find out where are inputs for the form zk- zkq-rest
Hi guys, im trying to modify by custumer exit, the program H99CEDT0 (the one that prints the payrroll for employees) my problem is that i need to find where some value is stored before printed in the form. the field is zkq-rest, i find a zq and i kno
-
Passing/retrieving hidden fields from Its template(IAC) to BSP page
Hi i m passing hidden fields from its template to custom BSP page...but not able to retrieve the hidden field in bsp page...is there any way we can retrieve the data....is there any equivalent of request.getattribute() method which we use in jsp to f
-
SYSAUX tablespace full and snapshots not deleted
hi all, I am on 10g linux. 1) my sysaux tablespace is full and i realize there are many awr snapshots lying around. so i went to my OEM console -> Automatic Workload Repository and this are basically my settings Snapshot Retention (days) 7 Snapshot I
-
How to batch-convert 500 pdf pages into individual jpg files?
Does anybody know how I can convert 500 single-page pdf files . . . into individual jpeg (image) files? They are all in the same hard drive folder (if that helps . . .) Thanks
-
So many things aren't working and I have a sneaking suspicion that it's related to Keychain. In a nutshell: Backup: bottom of main window in Backup says I'm in Trial Mode, limited to 100 megs, hasn't successfully completed a backup since November 4th