DC7800 Slim Hard Drive Drops Connection

I'll be working on the test computer windows 7 and suddenly the screen turns to black.
What I have to do is re insert the sata hard drive into the sata connector.
The drive is seating firmly but if I reinsert the drive and reboot I must press F1 to save and I
boot into windows. If I don't re insert the drive I can go to bios and it is not listed.
I need to slip the drive out ; re insert it ; and viola ; I am connected. But this is annoying because
in a workday I need to do this chore at least three times, everyday. If there a remedy? Thanks

Hi,
Please explain what is meant by "slim hard drive".
What happens if you just power off your computer and rebot it?
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Similar Messages

Can not get external hard drives to connect to my computer 17" Mac book Pro 10.7.5

can not get external hard drives to connect to my computer I am using a 17" Mac book Pro 10.7.5.
I have 2 iomegas and 1 LaCie. Changed cables. I can feel the external hard drives running and
I can hear them running but I can not get them on the computer any more. They did work at one time.
Can any one PLEASE help?

Nothing appear on my desktop.
I did Repair and Verify the HDDs in Disk Utility>First Aid from the
Utilites App about a dozen times ans they all said everything was good
except for the last time there were erors found and I ran the
Disk Utility from the Start Up Disk and the repairs were made and everything
was subposed to te good and still Nothing on the desk top.
Ginger

Using an external hard drive to connect the camera to the Mac Book Pro

I am about three weeks away from a 9 to 4 pin firewire cable. In the meantime, I am logging and capturing from my Canon AX HI through my external hard drive. I am not super amazed at the quality of the image, it's noisy.
I am using HDV tapes, and I don't beleive the lighting should be causing the issue.
Does anyone know if using the external hard drive to connect the camera to my Mac Book Pro is compromising the quality of the image? Can I expect a beautiful strong image on a lap top?
Thanks for any help.

There is ZERO quality loss when you capture via firewire. It is a digital transfer of files...that's it. The issue you have is that you are trying to judge the quality of your image based on what you see with your computer monitors, and that is simply the LAST thing you should be doing.
And since this is HDV, the only way to monitor that is with an HD card or I/O device, and an HD monitor or TV. Like the Matrox MXO2 mini or AJA I/O Express mini and HDTV.
Shane

I have just transferred my iTunes library from a hard drive previously connected to a windows laptop to a MacBook Pro and now all my options for editing info are greyed out. I have seen the answers if still using windows but could find a similar situation

I have just transferred my iTunes library from a hard drive previously connected to a windows laptop to a MacBook Pro and now all my options for editing info are greyed out. I have seen the answers if still using windows but could find a similar situation to this one.

Eels290776 wrote:
if my external hard drive is not connected to either of my machines, and I download something onto my iMac and then something different onto my Macbook, where are my machines going to be storing the new downloaded media
when the drive is not connected, +iTunes media folder location+ will default back to <MacintoshHD>/users/<yourname>/music/iTunes/iTunes music (or media)
and when I next connect the external hard drive how will I easily get the newly downloaded media onto the external HD
you'd have to point +iTunes media folder location+ back to the external via preferences > advanced > iTunes media folder location, then file > library, organize library > consolidate files
and essentially, to have it easily readable on both machines?
in that case it might be best to copy the entire iTunes folder to the external. then, on each machine, launch iTunes while pressing option on your keyboard. when prompted, click on +choose library+ and navigate to the iTunes folder on the external.
note only one iTunes can access the iTunes library @ a time !
also, make sure the external is mounted on either machine before launching iTunes.
JGG

Got a new external hard drive. Transferred all files from old hard drive to new hard drive. Connected hard drive to macbook. How do I get all my files to be recognized by iTunes and my already made playlists??

Got a new external hard drive. Transferred all files from old hard drive to new hard drive. Connected hard drive to macbook. How do I get all my files to be recognized by iTunes and my already made playlists??

Trying to download photos from IPHONE, IPAD to IPHOTO in IMAC after installing new hard drive.
How did you import the photos to iPad and iPhone?
If the photos have been synced to the iPhone and iPad using iTunes, you cannot sync them back.
See this document: http://support.apple.com/kb/HT4236
You can't reimport pictures synced from your computer to your device back to your computer. You can only import pictures in the Camera Roll or Saved Photos from your device to your computer. If you need to retrieve synced photos from your device:
If your photos are not in the Camera Roll on your devices, save them to the Camera Roll, share them to the Photo Stream, mail the photos, or, if you have iPhoto on the devices, use iTunes Photo Sharing.
http://help.apple.com/iphoto/iphone/2.0/?handbuch#blnkee26bc1
Save photos to your computer using iTunes
Connect your iOS device to your computer.
Tap a photo, album, event, web journal, or slideshow and tap Share> iTunes.
Tap Selected, or change the photos you want to save (if you are saving a slideshow skip to step 4):
Select different photos: Tap Choose Photos, tap one or more photos, and tap Next.
Select a range of photos: Tap Choose Photos, tap Range, tap the first and last photos in the range, and tap Next.
Select all the photos in an album or event: Tap All.
In iTunes, click the button for your device and click Apps at the top of the window.
Below File Sharing, select iPhoto (in Apps).
Select the Shared Photos folder under iPhoto Documents.
Click Save To and select the location on your computer where you want to save the items.
To view your photos, go to the Finder and look in the location you selected above.

HT5299 I have a Gdrive mini and 2 LaCie hard drives that connect fine using USB. Thunderbolt to fire wire 800 adaptor will not connect to either my MAC air or LaCie drives. Help

I have a G drive mini and 2 LaCie hard drives that connect fine using USB. Thunderbolt to fire wire 800 adaptor will not connect to either my iMAC or Mac air or LaCie drives. Help

Have you tried any of these soundcards designed for 2.0?
The 3.0 port is categorically designed to be comoatible with all 2.0 devices. The port itself will adapt to the usage parameters of the device.
But if you really want to downgrade, then simply plug any 2.0 hub into a MBA 3.0 port. The ports on the hub will be 2.0.

HT1408 How do I transfer files from an external hard drive formerly connected to a PC to my new iMac computer?

How do I transfer document and photo files from an external hard drive formerly connected to my old PC into my new iMac computer?

There are several different ways to move data from your old PC to your iMac, including Manually Migrating at > Switch 101: Migrate your Windows files or system to your Mac
If you just want to move file's from your External HD, simply plug it into your iMac and drag your doc's to your Documents Folder and Import your photos into iPhoto.
To Share data cross-platform using an External HD, see > Sharing drives - Macworld

Can an external Mac/Time Machine hard drive be connected with Airpot thru USB for wireless backup

I purchased a seagate 3 tb hard drive and planned on connecting it to my airport via usb. I setup the drive and did the full time machine back up of my imac. I then powered down the airport and the hard drive. I then plugged in the drive and airport and then powered them up. The airport lite up green then went yellow and stopped broadcasting.
Can these two work together like Time Capsule does?

I was sort of in the same boat. I ended up getting a 4th generation TC about six months ago. I only got the 2 TB model as I have a number of those WD My Passports laying around. I decided to use the TC's internal HDD as a NAS and use a powered USB hub with two My Passports attached to them for Time Machine backups. I use the 500 GB for my Mac mini backups and the 750 GB for my two other Mac laptops.
I could have just as easily switched to using the intenal HDD for Time Machine and the My Passports for the NAS. However, I wanted better to use the better transfer rates of the internal drive for my NAS.

Transferring data from an external hard drive previously connected to a PC

I have an external hard drive that is loaded with data from it's previous connection to a PC. I would like to transfer that data to my new mac pro.
Is that possible and if so can someone give me a brief description of the steps to take.
Thanks

It depends on the data - but all things are possible. I have data that goes back to Apple II days - and it has moved with me from Apple II to MS DOS to Mac OS 7 to Windows 95/98/2000/XP and then to OS X!
If you are using Word documents, Excel spreadsheets etc. then there will be no problems (other than minor formatting issues alluded to by another forum member). The only catch here is if you have encrypted a spreadsheet in Excel on the PC, the Mac version of Excel will not be able to read it.
Proprietary database structures (such as MS Access) are more difficult to transfer as there is no MS equivalent on the Mac (although FileMaker can import MS Access databases).
If you have Windows Address Book contacts and Outlook/Outlook Express emails, these can all be directly imported.
If you have WMV files (i.e. Windows Media Player), then you will need to download Flip4Mac to access them.

Seagate external hard drive not connecting to Mac

I plug in a Seagate GoFlex 500GB external hard drive into my PowerBook (specs at bottom of post). I go into Disk Utility to try to resize one of my partitions so I can back my Mac up. I click the final "Continue" button, and a few seconds later I get an error saying that the partition was not completed correctly and that the drive was removed. It was not. It shut itself off briefly (less than a second because I saw the light (normally always on) go out and come back on)!
I disconnect my hard drive and plug it into a PC. I pull up Disk Management (Windows equivalent of DU) and I try to resize the volume. Not possible. Okay. But they both are read and I could open each one's folder. So I plug it into my Mac again and after several seconds of it not showing up, I hold it to my ear. First, it spins up. It clicks the whole time. Next, it gradually spins down while making four whines/beeps (inaudible unless you are holding the unit up to your ear), each seperated by 3/4 of a second. Then it spins up again and repeats. I now plug in another 640GB unit and it clicks rapidly (inaudible unless held to ear). Both drives are then plugged into the PC. In Disk Management they show up. I format one of the volumes on the 500GB drive (I realized I did not need the data) and I removed the volume's drive letter. But the drives do not show up on my Mac anymore. (The 500GB model used to!!!!!)
One drive had a USB 3.0 adapter. One had a 2.0 adapter. I swap around the adapters and I achieve the same result. BTW, I also have a keyboard in the other USB port. It was there from the start.
The 500GB drive is NOT corrupted. In fact, I used to use it for Time Machine. My TM data is still on that drive and I dare not erase it. The drive is not powered by an AC adapter, either.
I don't want to go out and get another hard drive because I'm looking to sell my PB.
What went wrong? How come it no longer connects? I can't have killed the drive becuase it reads on a PC.

Solved the problem.
First of all, it seemed that it would not connect the second time because I plugged in the drive to the USB port on the RIGHT side of the keyboard. It worked fine on the LEFT side USB port. Huh?
Second of all, it shut off because of an issue with there not being enough power. (thanks a brody, the computer was underpowered, see below)
My solution: My father had a card that you could put in a PC card slot that provided two more USB ports and a port for an AC power adapter. I couldn't find the adapter cord (it was DC-to-USB, likely not enough power) but I plugged in a Palm Pilot wall plug (making it the equivalent of a powered hub, thanks a brody again for the underpowered system solution) and it backed up like a charm.
Thank you all for all your help!!!

I do not have permission to delete my trash. It only shows trash when my external hard drive is connected. If it is not connected, the trash empties. What can I do to have the trash empty when the hard drive is connected?

When emptying my trash, I get "The operation can't be completed because you don't have permission to access some of the items." (I always have a hard drive connected and have just found out that if I disconnect the hard drive, none of that trash shows in the trash can....so there has to be some correlation with the hard drive. I have had my mac for a year, and never had this problem before though with the hard drive hooked up and all the trash being able to empty completely.) How can I get rid of the trash. FYI - I do not have the time machine hooked up, so I know that is not an issue. Thanks for any ideas to try!

Please look over XLab's Solving Trash Problems article for some hints. This is an excellent place to start.

I'm having trouble with my iMac recognizing the WD My Book Live hard drive (ethernet) connecting to my Airport Extreme Base.

This is the first time I've tried to connect a hard drive to an ethernet port on the back of the base. I'm sure I need to do something with Airport setup but I'm not sure what to do.

Is this drive a network drive (use the ethernet port) or a local drive (use the usb port)
Ignore Shawn Grinter 2's post, until the type of drive is clear it is unwise to suggest anything.
What hard drive is this (make/model)
Your heading says MyBook Live, here is a picture of one,
Is this the drive you use?

Slow boot time Mac Osx when USB external hard drive is connected

I have bought some days ago an external hard drive, the Western Digital 500 GB Elements.
It goes very well by now but I have a problem.
When I turn on my MBP, after the "bong", I have to wait 60 second more than the normal boot time.
The screen stay grey and after 60 second it appears the apple.
It appens only when the external hdd is connected.
Someone has a solution?

Some time ago, I read that the OS has a problem waking from sleep or booting if an external was attached (USB or Firewire), something about it being confused about the startup order. Anyway, since then, I have religiously followed this procedure when I'm done using the external: unmount, unplug, and then turn it off (if necessary). I have never experienced a problem with my Mac not recognizing or not being able to boot because of an external. It certainly doesn't involve more than a second or two to unplug a USB drive.

If I have my itunes libarary on an external hard drive and connect it to someone else's computer, will it replace their itunes library?

My computer is no longer working. I need to work with itunes and my boyfriend said I should be able to just connect my external hard drive to his computer to use all my music. If I open my library on his computer I want to make sure all of his library is safe and they are not combined.

If you want your library to be truly portable then you need the database files on the drive as well as the media. Click the icon that launches iTunes and immediately press and hold down the shift key. Keep holding until prompted to choose or create a library. (If you don't get that prompt close iTunes and try again.) Click Create and browse to the root of your external drive. I'd suggest you create the library there as X:\iTunes where X: is the drive letter. Once the library has been created move the media folder from its current location on the drive into X:\iTunes\iTunes Media before importing it to the library with File > Add folder to library. That way the library will work properly when connected to another computer using the shift-start-iTunes method and the Choose option, regardless of the drive letter that has been assigned. Use this method to swtich back to your friend's library when you are done.
If you or your boyfriend's media folders are not in the normal location of an iTunes Media folder inside the main iTunes folder then when switching between libraries you may also need to correct the path to the media folder. You should also be aware that preferences for Keep... and Copy... may be preserved when switching libraries, so if you have different requirements check that the correct settings are in place after any change over.
If your iPad classic was set to sync with your library then iTunes may want to wipe and reload it. If all the content has been found on the external drive this should not present a problem but if needed see Recover your iTunes library from your iPod or iOS device for further advice.
For more information on "portable" libraries see make a split library portable.
tt2

How to use time capsule as hard drive and connect with existing net gear router

I have a netgear D6300 router, which i use to connect to internet - which is excellent so far for my downloads and games etc for my PS4 and hence am keen to continue using it. I bought the Airport time capsule for wireless storage, and when i set it up, I was advised on setup to connect the TC to my router, and it did what it needed to do.
Now, in order to connect to internet, i need to connect wifi to net gear router, but to access time capsule, i need to change wifi connection to my newly created wifi network with TC.
I want to use TC as a backup storage for my mac (its a 3TB TC), but also, my laptop has only 500gb hard drive which is now half full from downloads, so i want to transfer all my downloads to my TC and use it as an external hard drive, and future downloads to TC - but when i connect to wifi of TC, i can copy my folder on my mac, but not paste it to TC in finder. (the only thing in TC is an image of tmg of my macbook from first backup.).
How do i use TC as an external HD - there wasn't much difference in price of external wifi/wireless HD between non-TC and TC at 3gb, so i just thought i'd go for the airport TC option.
And is it possible to keep connected to wifi internet via net gear router, AND wifi TC - the whole point i bought it (from US shipped to australia on eBay, therefore not able to send back) was to use TC as external large HD via wifi, but keep my net gear router going.
Surely there is a way to not having to flick between wifi connections of TC and net gear internet.
When i'm connected to TC, i can't access internet, only TC.
And I don't really want to connect TC to my router via ethernet cable, as too many cables.
This can't be a difficult situation to manage, but i'm not sure how to do it.
Thanks

And I don't really want to connect TC to my router via ethernet cable, as too many cables.
Sorry but you have very little choice.
The TC can join to a wireless network.. but it is flakey, poor, slow and highly NOT recommended way to do things.
Nevertheless if you want to give it a try .. here is the method.
How do I setup my time capsule with wireless internet?
You SHOULD, plug the TC into the Netgear and run it in bridge mode.. you set the wireless to create a wireless network.. then when you connect to the TC it will be also connected to the internet and fast.
(if you don't do that you may as well have used a USB drive plugged into the Netgear, as it would be just as good).
TC is not actually designed for mixing Time Machine backups and files.. but if you are just storing downloads that is ok.. but I strongly recommend you use a DMG or sparsebundle to prevent the TM and the data from messing each other.
See Pondini instructions here.
Q http://pondini.org/TM/Time_Capsule.html

DC7800 Slim Hard Drive Drops Connection

Similar Messages

Maybe you are looking for