DCDIAG Result A net user or LsaPolicy failed with error 67
I have looked through all the similar posts and have ran an Authoritative and UnAthroativte process. This allowed my SYSVOL to replicate and come back. I still keep getting this error on the one DC. Everything else passes fine. I am pulling my hair out
if anyone has had this problem please help. Also this is a Server 2012 R2 DC
Hi Mike,
Before going further, how did you do the Sysvol restore? What’s our Sysvol replication mechanism, FRS or DFSR?
If our Sysvol replication mechanism is FRS, we need to do an authoritative (D4) restore on a healthy DC and non-authoritative (D2) restore on other DCs.
Regarding this point, the following thread and article can be referred to for more information.
[DC2] An net use or LsaPolicy operation failed with error 67 - Moving AD from 2003R2 to Server 2012
http://social.technet.microsoft.com/Forums/en-US/401f7023-9ef1-4dc7-94f4-f59a74b49d65/dc2-an-net-use-or-lsapolicy-operation-failed-with-error-67-moving-ad-from-2003r2-to-server-2012?forum=winserverDS
Using the BurFlags registry key to reinitialize File Replication Service replica sets
http://support.microsoft.com/kb/290762/en-us
If our Sysvol replication mechanism is DFSR, we can follow the article below to do the Sysvol restore.
How to force an authoritative and non-authoritative synchronization for DFSR-replicated SYSVOL (like "D4/D2" for FRS)
http://support.microsoft.com/kb/2218556/en-us
Best regards,
Frank Shen
Similar Messages
-
Hi,
We are running a Mountain Lion Server with Open Directory / LDAPv3, as far as I can tell. My responsibility is to get my CentOS 6.3 box running Samba v. 3.5.10-125.el6 to authenticate users against the ML / OD box. I can ssh to the CentOS box OK and I can get Guest access to the Samba share to go OK too. Also, the OD passwords on the LDAP server are set to 'Open Directory' so I guess that means that they are encrypted and the Samba server is set to send encrypted passwords. But when a user tries to properly authenticate using either say via a Mac client Finder [Command-K], or smbclient, the Samba server will generate this message:
check_ntlm_password: Authentication for user ['name'] -> ['name'] FAILED with error NT_STATUS_LOGON_FAILURE
(I am blanking out the user name on purpose).
Of course there is more to the story, but those are the basics.
Here are the relevant parts of my smb.conf. FWIW, the CentOS / Samba box is called Jupiter.
Thank you,
NickZ
[smb.conf]
[global]
display charset = UTF-8
realm = SATURN.MCLEAN.HARVARD.EDU
netbios aliases = ANL
server string = Welcome To The Jupiter Samba Server Version 3.5.10-125.el6
interfaces = lo, em1
security = SERVER
update encrypted = Yes
password server = saturn.mclean.harvard.edu
smb passwd file = /var/lib/samba/private/secrets.tdb
passdb backend = ldapsam:ldap://saturn.mclean.harvard.edu
passwd program = /usr/bin/passwd %u
unix password sync = Yes
lanman auth = Yes
client NTLMv2 auth = Yes
client use spnego principal = Yes
kerberos method = system keytab
log level = 2
syslog = 3
log file = /var/log/samba/log.%m
max log size = 50
name resolve order = host lmhosts wins bcast
server signing = auto
preferred master = Auto
ldap admin dn = uid=DirAdmin,cn=users,dc=saturn,dc=mclean,dc=harvard,dc=edu
ldap group suffix = cn=groups
ldap passwd sync = yes
ldap suffix = dc=saturn,dc=mclean,dc=harvard,dc=edu
ldap ssl = no
ldap user suffix = cn=users
usershare allow guests = Yes
idmap backend = ldap:ldap://saturn.mclean.harvard.edu
idmap uid = 10000-20000
idmap gid = 30000-40000
cups options = raw
[homes]
comment = Home Directories
read only = No
[printers]
comment = All Printers
path = /var/spool/samba
printable = Yes
browseable = No
[anl]
comment = Main ANL Share
path = /anl
read only = No
guest ok = Yes
hide dot files = NoTurns out a printer driver installed on an XP (even W2K(?)) was (apparently?) flooding the OS X SMB server to the point of collapse. Uninstalling the "HP Tools" part of the driver cleared it up. The printer is an HP LJ1300. I had downloaded the full driver from HP.com. I don't know if any/all these conditions need to be matched, but: the printer was on the network using an HP print server JetDirect EX Plus, and the computer(s) in question were connecting directly to it (not via a print server). It's been too long ago, but there were always several errors in the System Log (Win XP Event Viewer) that correlated with the errors on the OS X server.
Proud to say that since that day (10+ months ago) I've not seen it happen again. whew. -
Request User State Store Fails with error code 0x00004005
I am trying to get a machine refresh working in SCCM and am running into a road block with the user state migration. The Task sequence hits Request user state store and then fails. In the logs on the machine it shows it downloads the cert from the SMP but it fails to verify the cert. The thing is that this was working and then stopped for no apparent reason. I have added a second SMP and it has the same issue so its got to be something environmental causing this. I have found no references to the errors I am recieving that relate to the issue so I am stumped. We have a SCCM 2007 site in mixed mode. The error log is:
The task sequence execution engine failed executing the action (Request User State Storage) in the group (Capture User Files and Settings) with the error code 16389 Action output: ployment\osdsmpclient\smpclient.cpp,1743) Request to SMP 'ATXFREPSMS01.NA.atxglobal.com' failed with error (Code 0x80090006). Trying next SMP. FALSE, HRESULT=80004005 (e:\nts_sms_fre\sms\client\osdeployment\osdsmpclient\smpclient.cpp,1698) pClientRequestToSMP->Execute(migInfoFromMP.saSMPs), HRESULT=80004005 (e:\nts_sms_fre\sms\client\osdeployment\osdsmpclient\smpclient.cpp,2713) ExecuteCaptureRequestToSMP(migInfoFromMP), HRESULT=80004005 (e:\nts_sms_fre\sms\client\osdeployment\osdsmpclient\smpclient.cpp,2755) ExecuteCaptureRequest(), HRESULT=80004005 (e:\nts_sms_fre\sms\client\osdeployment\osdsmpclient\main.cpp,72) OSDSMPClient finished: 0x00004005 Failed to verify certificate signature for 'ATXFREPSMS01.NA.atxglobal.com' (0x80090006) ClientKeyRequestToSMP failed (0x80090006). ClientRequestToSMP:oRequest failed. error = (0x80090006). Failed to find an SMP that can serve request after trying 4 attempts. ExecuteCaptureRequestSMP failed (0x80004005). ExecuteCaptureRequest failed (0x80004005).. The operating system reported error 16389:Hi
I am getting the same issue.
More info:
The same task works ok for one client - an xp machine that was upgraded to vista sp1 using sccm but without usmt.
If I send this machine a task which includes usmt and os deploy it works.
On 2 other machines ( so far) , the request store fails with the same error - 0x80090006. (one of them existing vista and the other xp)
I have tried removing and adding the client from the domain but it did not help.
Any idea?
David -
User State Restore Fails with Error 0x8007000E
I am having some trouble restoring user states with usmt. I am running a side by side migration, for which I have already added the computer association prior to running the capture. The task sequence I am using is a very simple and only has
the following steps: Request State Store, Restore User State, and Release state store.
I am aware that the error code is linked to task sequence environment running out of space, and that it may have something to do with software updates. However, we are not currently deploying any software updates from SCCM. We do have an upstream WSUS
server that is supplying updates directly to clients. Would this still be an issue? I find it hard to believe that an OS deployment sequence runs just fine, but a very simple state restore errors out. Any thoughts?
Thanks,
KyleIt looks like I'm getting two errors during the restore. First is that the COMPUTERNAME\unknown account is chosen for migration, but the target does not have account NEWCOMPUTERNAME\unkown. Directly after that is Failed.[gle=0x00000006]. Then
I get unable to create a local account because \lac was not specified and USMT error code 14. Below are the logs:
2015-03-12 11:23:51, Info [0x000000] LOADSTATE.EXE Version 6.3.9600.17237[gle=0x000000b7]
2015-03-12 11:23:51, Info [0x000000] USMT Started at 2015/03/12:11:23:51.094
2015-03-12 11:23:51, Info [0x000000] Command line: C:\_SMSTaskSequence\Packages\AHQ0000A\amd64\loadstate.exe \\ABBTECHCM01.ABBTECH.US\SMPSTOREd_FD7B8EBE$\ED83F415E21062DB9B2A8177AA933D6234B16FE457A8D193A0632650FCC769FB /decrypt /keyfile:****
/c /l:C:\Windows\CCM\Logs\SMSTSLog\loadstate.log /progress:C:\Windows\CCM\Logs\SMSTSLog\loadstateprogress.log /i:C:\_SMSTaskSequence\Packages\AHQ0000A\amd64\migdocs.xml /i:C:\_SMSTaskSequence\Packages\AHQ0000A\amd64\migapp.xml
2015-03-12 11:23:51, Info [0x000000] Script file specified: C:\_SMSTaskSequence\Packages\AHQ0000A\amd64\migdocs.xml[gle=0x000000cb]
2015-03-12 11:23:51, Info [0x000000] Script file specified: C:\_SMSTaskSequence\Packages\AHQ0000A\amd64\migapp.xml[gle=0x000000cb]
2015-03-12 11:23:51, Info [0x000000] Starting the migration process[gle=0x00000006]
2015-03-12 11:24:01, Info [0x000000] System information:
2015-03-12 11:24:01, Info [0x000000] Processing the settings store[gle=0x00000006]
2015-03-12 11:24:14, Info [0x000000] Selecting migration units
[gle=0x00000006]
2015-03-12 11:24:14, Error [0x000000] The account COMPUTERNAME\uknown is chosen for migration, but the target does not have account NEWCOMPUTERNAME\uknown. See documentation on /lac, /lae, /ui,
/ue and /uel options.
2015-03-12 11:24:14, Info [0x000000] Failed.[gle=0x00000006]
2015-03-12 11:24:14, Info [0x000000] Unable to create a local account because /lac was not specified[gle=0x00000006]
2015-03-12 11:24:14, Info [0x000000] USMT Completed at 2015/03/12:11:24:14.843[gle=0x00000057]
2015-03-12 11:24:15, Info [0x000000] ----------------------------------- USMT ERROR SUMMARY -----------------------------------
2015-03-12 11:24:15, Info [0x000000] * USMT error code 14:
2015-03-12 11:24:15, Info [0x000000] +-----------------------------------------------------------------------------------------
2015-03-12 11:24:15, Info [0x000000] | Unable to create a local account because /lac was not specified
I tried enabling the restore local accounts box, but that didn't work. Also the sequence runs just fine on a different model machine. -
FAILED with error NT_STATUS_NO_SUCH_USER
Setup:
OS X Server 10.3.9. PDC. ALL clients are a combination of XP and W2K. No macs (sadly).
Situation:
Over the last 3 years I've been plagued with this problem. Symptoms include new authentications are not granted access, but existing connections suffer no degradation of service. The simple solution has been to simply go into Server Admin and "Restart Service" on the Windows service. Done and done. However, this can happen anywhere from once a week to (up to) 3 times a day. Even on weekends when (likely) no one is in the building, though some users may not log out of their workstations - let alone shut down.
Troubleshooting:
1) I set the smbd logs to 1 (debug) and at the point of degrading, I only see this:
***** Begin: I changed nothing; I left out nothing ***********************
[2008/04/14 10:54:09, 1] authods.c:opendirectory_authuser(208)
User "bvolz" authenticated successfully with "dsAuthMethodStandard:dsAuthSMBNTKey"
[2008/04/14 10:54:09, 2] authods.c:opendirectory_smb_pwd_checkntlmv1(424)
opendirectorysmb_pwd_checkntlmv1: [-14071]opendirectoryuser_sessionkey
[2008/04/14 10:54:09, 2] /SourceCache/samba/samba-60.5/samba/source/auth/auth.c:checkntlmpassword(305)
checkntlmpassword: authentication for user [bvolz] -> [bvolz] -> [bvolz] succeeded
[2008/04/14 10:54:10, 1] /SourceCache/samba/samba-60.5/samba/source/smbd/service.c:close_cnum(841)
volzsql (192.168.0.3) closed connection to service Shared
[2008/04/14 10:54:11, 0] pdbods.c:getrecords(1015)
dsGetRecordEntry error (-14085)odssam_getsampwnam: [-14085]getsam_recordattributes dsRecTypeStandard:Users no account for 'jpiper'!
[2008/04/14 10:54:11, 2] /SourceCache/samba/samba-60.5/samba/source/auth/auth.c:checkntlmpassword(312)
checkntlmpassword: Authentication for user [jpiper] -> [jpiper] FAILED with error NTSTATUS_NO_SUCHUSER
***** End: I changed nothing; I left out nothing ***********************
2) Recently, I tried to change the default allowed connections per KB Article: http://docs.info.apple.com/article.html?artnum=107899 but that actually only seemed to exacerbate the problem. Today I removed the directories that were added in Netinfo Manager from the KB.
3) I also looked at the nmbd.log and frequently see this, which is equally as troubling:
[2008/04/14 10:44:29, 2] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdbrowsesync.c:sync_withdmb(154)
syncwithdmb:
Initiating sync with domain master browser VOLZSERVER<20> at IP 65.16.245.50 for workgroup VOLZINC
[2008/04/14 10:44:29, 2] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdbrowsesync.c:announce_local_master_browser_to_domain_masterbrowser(110)
announcelocal_master_browser_to_domain_masterbrowser:
We are both a domain and a local master browser for workgroup VOLZINC. Do not announce to ourselves.
[2008/04/14 10:44:29, 2] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdbrowsesync.c:sync_withdmb(154)
syncwithdmb:
Initiating sync with domain master browser VOLZSERVER<20> at IP 65.16.245.50 for workgroup VOLZINC
[2008/04/14 10:46:57, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:46:57, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:46:57, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:46:57, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:46:57, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:46:57, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:46:57, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:46:57, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:59:05, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:59:05, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:59:05, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:59:05, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:59:05, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:59:05, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:59:05, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:59:05, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:59:27, 2] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdbrowsesync.c:announce_local_master_browser_to_domain_masterbrowser(110)
announcelocal_master_browser_to_domain_masterbrowser:
We are both a domain and a local master browser for workgroup VOLZINC. Do not announce to ourselves.
This type of activity in the log is repeated over and over and over again.
Question:
How do I make it stop? Ok, to be fair, I've searched for the last few years for a solution and I'm not sure why samba is continuing to 'break.' Is there someone here that can enlighten me or poke me in the right direction to why this could be happening? I know little to nothing about samba. I DO know networking, and this could be the issue. The server was handed to me by the previous admin and so to rebuild (the easy solution) isn't so easy because the previous admin didn't document anything he did to build it, like NAT forwarding and such, which, if I don't put back into it, will cause MANY headaches. So, eventually I WILL rebuild from scratch (the time may be nigh), and I think it may fix a misconfiguration, but I fear it will be difficult. This is our production server with no test environment (other than using SuperDuper! to image the drive and play with it over a weekend or something).
Plea:
For help.
Edit: How do I suppress the wiki markup? It's butchering the posted log excerpts. <nowiki></nowiki> doesn't seem to work.Turns out a printer driver installed on an XP (even W2K(?)) was (apparently?) flooding the OS X SMB server to the point of collapse. Uninstalling the "HP Tools" part of the driver cleared it up. The printer is an HP LJ1300. I had downloaded the full driver from HP.com. I don't know if any/all these conditions need to be matched, but: the printer was on the network using an HP print server JetDirect EX Plus, and the computer(s) in question were connecting directly to it (not via a print server). It's been too long ago, but there were always several errors in the System Log (Win XP Event Viewer) that correlated with the errors on the OS X server.
Proud to say that since that day (10+ months ago) I've not seen it happen again. whew. -
[DC2] An net use or LsaPolicy operation failed with error 67 - Moving AD from 2003R2 to Server 2012
Hello, i hope someone can help me with this tricky situation.
The plan is to move AD from 2003R2 name "DC" to a server 2012 "DC2"
I have made all the adjustments and transferred all the role to the new 2012 server, and both are now GC servers.
The problem is "transferring" the netlogon share.
in DCDIAg on the new server i get:
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = DC2
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\DC2
Starting test: Connectivity
......................... DC2 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\DC2
Starting test: Advertising
......................... DC2 passed test Advertising
Starting test: FrsEvent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
......................... DC2 passed test FrsEvent
Starting test: DFSREvent
......................... DC2 passed test DFSREvent
Starting test: SysVolCheck
......................... DC2 passed test SysVolCheck
Starting test: KccEvent
......................... DC2 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... DC2 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... DC2 passed test MachineAccount
Starting test: NCSecDesc
......................... DC2 passed test NCSecDesc
Starting test: NetLogons
Unable to connect to the NETLOGON share! (\\DC2\netlogon)
[DC2] An net use or LsaPolicy operation failed with error 67,
The network name cannot be found..
......................... DC2 failed test NetLogons
Starting test: ObjectsReplicated
......................... DC2 passed test ObjectsReplicated
Starting test: Replications
......................... DC2 passed test Replications
Starting test: RidManager
......................... DC2 passed test RidManager
Starting test: Services
NtFrs Service is stopped on [DC2]
......................... DC2 failed test Services
Starting test: SystemLog
......................... DC2 passed test SystemLog
Starting test: VerifyReferences
......................... DC2 passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : dom1
Starting test: CheckSDRefDom
......................... domain passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... domain passed test CrossRefValidation
Running enterprise tests on : domain.xxxxx.no
Starting test: LocatorCheck
......................... domain.xxxxx.no passed test LocatorCheck
Starting test: Intersite
......................... domain.xxxx.no passed test Intersite
I have as a last option the burflags issue, i tried this with the option D2, but i think i have done it wrong, because the netlogon share is gone on the old DC. i took a backup of the files and folders before
i did this. http://support.microsoft.com/kb/290762/en-us But i am a little confused on which server i am going to set the D4 value on now? COuld someone help? Best regards AkselHello Dirk
And thank you for your answer, in regards of the KB, do i have to follow the steps regarding:
Global vs. replica set specific reinitialization
You can locate the replica set specific
BurFlags
registry key by determining the GUID for the replica set that you want to configure. To determine which GUID
corresponds to which replica set and configure a restore, follow these steps:
Click Start, and then click Run.
In the Open box, type cmd and then press ENTER.
In the Command box, type net stop ntfrs.
Click Start, and then click Run.
In the Open box, type regedit and then press ENTER.
To determine the GUID that represents the replica set that you want to configure, follow these steps:
Locate the following key in the registry:
KEY_LOCAL_MACHINE\System\CurrentControlSet\Services\NtFrs\Parameters\Replica Sets
Below the Replica Sets subkey, there are one or more subkeys that are identified by a GUID. In the left pane, click the GUID, and then in the right
pane note the Data that is listed for the Replica Set Root value. This file system path will indicate which replica set is represented by this GUID.
Repeat step 4 for each GUID that is listed below the Replica Sets
And so on?
I have only thos 2 DC's in the network... -
RUNCLUVFY Result: PRVF-4007 : User equivalence check failed for user "orac
hello
try to run runcluvfy.sh I receive the following screen rac2 is passed but rac 1 is failed can sombody help me?
thanks
[oracle@rac1 grid]$ ./runcluvfy.sh stage -pre crsinst -n rac1,rac2 -verbose
Performing pre-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "rac1"
Destination Node Reachable?
rac2 yes
rac1 yes
Result: Node reachability check passed from node "rac1"
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
rac2 passed
rac1 failed
Result: PRVF-4007 : User equivalence check failed for user "oracle"
WARNING:
User equivalence is not set for nodes:
rac1
Verification will proceed with nodes:
rac2
Checking node connectivity...Check this older thread which has a lot of information on this:
User equivalence check failed (RAC setup) -
Result: PRVF-4007 : User equivalence check failed for user "oracle"
Hi
I get below error everytime I run ./cluvfy stage -pre crsinst -n node01,node02 -fixup -verbose > a.log
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
node02 passed
node01 failed
Result: PRVF-4007 : User equivalence check failed for user "oracle"
WARNING:
User equivalence is not set for nodes:
node01
Verification will proceed with nodes:
node02
node01 is the local node, if I run from node02 It comes back saying the same thing about node2!
I have checked oracle uid and groups all set correctly and ssh working fine ...
I have ran the same command for grid user and getting the same error !!i know what it was, i should have done ssh localnode date for once at least!!
I only did ssh remotenode date :) -
Post Author: LeeCUK
CA Forum: Authentication
I have installed Enterprise XIR2 onto a Windows 2003 server and all services are running.I have installed the client on another windows 2003 server and I can connect to the console via the web.
Firstly desktop intel would not work and gave me the error below, however a new entry appeared in my server dropdown with servername (.Net Portal) and after selecting this Desktop intell worked.
When I try to run designer I dont get the extra server in the dropdown nor does it connect when tryped manually and gives me the same error I was getting for desktop intel.
Im using enterprise authentication
Has anyone figured this out please?
The error im getting is below[repo_proxy 13] SessionFacade::openSessionLogon with user info has failed(Transport error: Communication failure.(hr=#0x80042a01)Post Author: jsanzone
CA Forum: Authentication
LeeCUK:
The [repo_proxy 13] error seems to be a catch-all for BO in that I've worked with this software (XI R2) for 1 1/2 years now and each time I've encountered [repo_proxy 13] it has been for a different reason, thus, you're going to have to apply troubleshooting checks all over the place until you find the problem. In my particular case I just resolved my [repo_proxy 13] error I've been working on this week, and here was my scenario. Our server in the lab died due to a hard drive failure, so we cut our losses and installed a new & more powerful server. When the rebuild was done I could not connect from my laptop to the repository via Designer (good old [repo_proxy 13] error). After much angst, etc, etc I found out that the servers in the CMC (/businessobjects/enterprise115/admin/en/admin.cwrwere">http://<server>/businessobjects/enterprise115/admin/en/admin.cwrwere) were all down except for one (even though CCM showed all servers "up"). When I went to start the servers in the CMC I was prompted for an account, and no matter what account I tried it won't work. So I went back to the CCM servers and stopped them all, then changed the default account it was using from LocalSystem to the administrator account, restarted all servers in CCM, went back to CMC and noted that all servers were now up as well. Then I went back to my laptop and used Designer and was able to successfully log in. Thus, the end of my story, however, it seems that many [repo_proxy 13] errors have different beginning and endings. For instance, a year ago I had the same [repo_proxy 13] error and brought it to BO tech support. They determined that I had to uninstall my client from my laptop, clean out the registry for any references to BO keys, and remove the c:\program files \Business Objects folder, then reinstall, and sure enough it worked in that case, but not in this case when I tried it again. By digging deeper I found out the root cause to my current problem, and voila, I'm in!
Good luck! -
I am looking at an issue with users not getting specific group policies.
After searching a number of client computers I found that the following error
The user '*' preference item in the 'User - 6th Form Students Policy {E03166E7-A848-48B5-AA93-97B848AA9C13}' Group Policy object did not apply because it failed with error code '0x80070003 The system cannot find the path specified.' This error was suppressed.
I can find the folder in the Sysvol folder on all of the domain controllers.
The issue with end users seems to be that the proxy settings for internet explorer is not being applied.
Potential problems?
one folder in sysvol entry is empty
\\<server>\SYSVOL\<domain.name>\Policies\{E03166E7-A848-48B5-AA93-97B848AA9C13}\User\microsoft\IEAK\LOCK
or is this our issue
The old method of configuring proxy settings to Internet Explorer 9 has changed?
https://support2.microsoft.com/kb/2530309?wa=wsignin1.0
http://thommck.wordpress.com/2013/11/08/the-new-way-to-configure-internet-explorer-proxy-settings-with-group-policy/Hi all
In administering this policy I am a little confused.
We have a policy that distributes proxy settings in the internet explorer maintenance settings section - however when opening this policy up in GPO editor the internet explorer maintenance section is not present.
I plan to apply the settings via User/preferences/control panel settings/ internet settings (or registry settings from article) however I am unable to edit the settings for internet explorer maintenance and these will persist. Ideas???? -
SSPI handshake failed with error code 0x8009030c and Login failed for user''
I got the following error when tried to connect to local machine in the
non-domain environment with Windows Authentication by SSMS.
"SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security."
"Login failed for user''. the user is nothing associated with a trusted SQL server connection."
questions
1,if I saw the "SSPI handshake failed ", does it means it must used Kerberos but failed? or it is also possible used the NTLM but failed?
2,Any ideas for this issue?
Please click the Mark as Answer button if a post solves your problem!Hi Michael,
Firstly, "SSPI Handshake Failed" error happens usually when connection failed between the server and domain controllers or failed Kerberos authentication. For more details about "SSPI Handshake Failed" error, please review this
FAQ.
Secondly, regarding to your error message, it could be caused by loopback check. To resolve the issue, please set the DisableLoopbackCheck registry entry to 1 by performing the following steps.
1.Click Start, click Run, type regedit, and then click OK.
2.Locate and then click the following registry subkey: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
3.Right-click Lsa, point to New, and then click DWORD Value.
4.Type DisableLoopbackCheck, and then press ENTER.
5.Right-click DisableLoopbackCheck, and then click Modify.
6.In the Value data box, type 1, and then click OK.
7.Exit Registry Editor.
8.Restart the computer.
There is a similar blog about your scenario for your reference.
http://www.bhcblog.com/2009/10/08/fix-for-login-failed-for-user-the-user-is-not-associated-with-a-trusted-sql-server-connection/
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support -
SSIS custom execute sql task : Failed with error
I am developing a custom SSIS task for running sql task. But it fails with error - I'm trying to set the resultsetbinding to be used by next task in workflow.
Error: 0xC0014054 at CustomSSISTask: Failed to lock variable "User::id" for read access with error 0xC0010001 "The variable cannot be found. This occurs when an attempt is made to retrieve a variable from the Variables collection on a container
during execution of the package, and the variable is not there. The variable name may have changed or the variable is not being created.".
Error: 0xC002F210 at CustomSSISTask, Execute SQL Task: Executing the query "SELECT id FROM sysobjects WHERE name = 'sysrowsets..." failed with the following error: "Failed to lock variable "User::id" for read access with error 0xC0010001
"The variable cannot be found. This occurs when an attempt is made to retrieve a variable from the Variables collection on a container during execution of the package, and the variable is not there. The variable name may have changed or the variable is
not being created.".
". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Warning: 0x80019002 at CustomSSISTask: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches
the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
Task failed: CustomSSISTask
Here is the code sample I'm trying ,
public override DTSExecResult Execute(Connections connections, VariableDispenser variableDispenser,
IDTSComponentEvents componentEvents, IDTSLogging log, object transaction)
MessageBox.Show("testing:");
try
// Add the SQL Task
Package package = new Package();
package.Executables.Add("STOCK:SQLTask");
Microsoft.SqlServer.Dts.Runtime.Variable variable = package.Variables.Add("id", false, "User", 0);
// Get the task host wrapper
TaskHost taskHost = package.Executables[0] as TaskHost;
// Get the task object
ExecuteSQLTask task = taskHost.InnerObject as ExecuteSQLTask;
// Set core properties
task.Connection = connections[0].Name;
task.SqlStatementSource = "SELECT id FROM sysobjects WHERE name = 'sysrowsets'";
//task.SqlStatementSource =
// "SELECT PersonID from [AmalgaSpeedTableData].[SpeedTable].[DimPerson] where PersonIntID = '1'";
task.SqlStatementSourceType = SqlStatementSourceType.DirectInput;
// Add result set binding, map the id column to variable
IDTSResultBinding resultBinding = task.ResultSetBindings.Add();
//IDTSResultBinding resultBinding = task.ResultSetBindings.GetBinding(0);
resultBinding.ResultName = "variable";
resultBinding.DtsVariableName = variable.QualifiedName; //"User::id";
task.Execute(connections, variableDispenser, componentEvents, log, transaction);
catch (Exception ex)
throw new ArgumentException(ex.Message);
return DTSExecResult.Success;
It doesnt throw any exception but custom task fails.
Later I will be also using parametersetbindings to pass some input parameters to this task , since I'm stuck for out param - blocked moving ahead.
Any help would be greatly appreciated.
Thanks
SangHi, could you check whether the following threads help:
http://stackoverflow.com/questions/5787621/ssis-package-failed-to-locak-variable-for-read-access-with-error-0xc0010001
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/40ee7eff-5ec1-426f-a1a8-ab85b40b51aa/error-variable-can-not-be-found-while-executing-package-from-the-net-code?forum=sqlintegrationservices
Regards, Leo -
Time Machine copy failed with error:28
Usually I just say OK when Time Machine can't complete a backup in either my computer or my wife's, and a couple of months later I get the irritating message again.
This time, it keeps returning. I have no idea what to do:
Here's a log:
2/16/13 3:46:23.127 PM com.apple.backupd[1325]: Starting automatic backup
2/16/13 3:46:23.914 PM com.apple.backupd[1325]: Backing up to: /Volumes/FreeAgent GoFlex Drive/Backups.backupdb
2/16/13 3:46:29.390 PM AppleMobileSync[1329]: [0x10020c310] |ISyncManager|Warning| Could not retrieve ISyncClient with id com.apple.Keychain!
2/16/13 3:46:29.398 PM SyncServer[1315]: [0x7fd152c0bec0] |SyncManager|Error| sync alert tool for com.apple.Mail is invalid: can't find /System/Library/Frameworks/Message.framework/Resources/MailSync
2/16/13 3:46:29.416 PM com.apple.backupd[1325]: Using file event preflight for Macintosh HD
2/16/13 3:46:36.243 PM com.apple.backupd[1325]: Will copy (8.16 GB) from Macintosh HD
2/16/13 3:46:36.441 PM com.apple.backupd[1325]: Found 1464 files (8.16 GB) needing backup
2/16/13 3:46:36.478 PM com.apple.backupd[1325]: 11.28 GB required (including padding), 13.29 GB available
2/16/13 3:46:43.180 PM Mail[192]: open on /Users/HBrazee/Library/Mail/V2/Mailboxes/Deleted Messages.mbox/9032643A-C8BE-4195-B233-E5A6A64E535C/Data/4/9/Messages/94014.emlx : No such file or directory
2/16/13 3:47:09.883 PM mdworker[1337]: Unable to talk to lsboxd
2/16/13 3:47:09.887 PM mdworker[1335]: Unable to talk to lsboxd
2/16/13 3:47:09.892 PM mdworker[1336]: Unable to talk to lsboxd
2/16/13 3:47:09.896 PM mdworker[1334]: Unable to talk to lsboxd
2/16/13 3:47:10.000 PM kernel[0]: Sandbox: sandboxd(1343) deny mach-lookup com.apple.coresymbolicationd
2/16/13 3:47:10.414 PM sandboxd[1343]: ([1337]) mdworker(1337) deny mach-lookup com.apple.ls.boxd
2/16/13 3:47:10.460 PM sandboxd[1343]: ([1335]) mdworker(1335) deny mach-lookup com.apple.ls.boxd
2/16/13 3:47:10.525 PM sandboxd[1343]: ([1336]) mdworker(1336) deny mach-lookup com.apple.ls.boxd
2/16/13 3:47:10.625 PM sandboxd[1343]: ([1334]) mdworker(1334) deny mach-lookup com.apple.ls.boxd
2/16/13 3:49:19.630 PM mdworker[1359]: Unable to talk to lsboxd
2/16/13 3:49:19.635 PM mdworker[1360]: Unable to talk to lsboxd
2/16/13 3:49:19.711 PM sandboxd[1362]: ([1359]) mdworker(1359) deny mach-lookup com.apple.ls.boxd
2/16/13 3:49:19.716 PM sandboxd[1362]: ([1360]) mdworker(1360) deny mach-lookup com.apple.ls.boxd
2/16/13 3:49:20.000 PM kernel[0]: Sandbox: sandboxd(1362) deny mach-lookup com.apple.coresymbolicationd
2/16/13 3:49:36.358 PM com.apple.usbmuxd[27]: _SendAttachNotification (thread 0x7fff73d59180): Device 1c:ab:a7:98:32:58@fe80::1eab:a7ff:fe98:3258._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
2/16/13 3:49:38.090 PM SyncServer[1365]: [0x7fc8f0c0bec0] |DataManager|Warning| Client com.apple.Mail sync alert tool path /System/Library/Frameworks/Message.framework/Resources/MailSync does not exist.
2/16/13 3:50:01.568 PM iTunes[203]: _NotificationSocketReadCallbackGCD (thread 0x7fff73d59180): Unexpected connection closure...
2/16/13 3:50:01.570 PM ath[254]: _NotificationSocketReadCallbackGCD (thread 0x7fff73d59180): Unexpected connection closure...
2/16/13 3:50:28.401 PM mdworker[1368]: Unable to talk to lsboxd
2/16/13 3:50:28.405 PM mdworker[1367]: Unable to talk to lsboxd
2/16/13 3:50:28.000 PM kernel[0]: Sandbox: sandboxd(1373) deny mach-lookup com.apple.coresymbolicationd
2/16/13 3:50:29.094 PM sandboxd[1373]: ([1368]) mdworker(1368) deny mach-lookup com.apple.ls.boxd
2/16/13 3:50:29.100 PM sandboxd[1373]: ([1367]) mdworker(1367) deny mach-lookup com.apple.ls.boxd
2/16/13 3:52:12.017 PM Mail[192]: open on /Users/HBrazee/Library/Mail/V2/POP-brazee.net/[email protected]/Sent Messages.mbox/9032643A-C8BE-4195-B233-E5A6A64E535C/Data/4/9/Messages/94034.emlx : No such file or directory
2/16/13 3:52:34.652 PM mdworker[1383]: Unable to talk to lsboxd
2/16/13 3:52:34.884 PM mdworker[1384]: Unable to talk to lsboxd
2/16/13 3:52:34.939 PM mdworker[1382]: Unable to talk to lsboxd
2/16/13 3:52:34.950 PM mdworker[1385]: Unable to talk to lsboxd
2/16/13 3:52:34.997 PM sandboxd[1390]: ([1383]) mdworker(1383) deny mach-lookup com.apple.ls.boxd
2/16/13 3:52:35.003 PM sandboxd[1390]: ([1384]) mdworker(1384) deny mach-lookup com.apple.ls.boxd
2/16/13 3:52:35.008 PM sandboxd[1390]: ([1382]) mdworker(1382) deny mach-lookup com.apple.ls.boxd
2/16/13 3:52:35.013 PM sandboxd[1390]: ([1385]) mdworker(1385) deny mach-lookup com.apple.ls.boxd
2/16/13 3:52:35.000 PM kernel[0]: Sandbox: sandboxd(1390) deny mach-lookup com.apple.coresymbolicationd
2/16/13 3:54:21.305 PM Dock[138]: no information back from LS about running process
2/16/13 3:54:21.309 PM lsboxd[233]: @AE relay 61657674:6f646f63
2/16/13 3:54:21.000 PM kernel[0]: Sandbox: sandboxd(1401) deny mach-lookup com.apple.coresymbolicationd
2/16/13 3:54:24.631 PM com.apple.XType.FontHelper[1406]: FontHelper: message received. (<dictionary: 0x7ffc64800c60> { count = 2, contents =
"query" => <string: 0x7ffc64800dc0> { length = 105, contents = "com_apple_ats_name_postscript == "Arial,Bold" && kMDItemContentTypeTree != com.adobe.postscript-lwfn-font" }
"restricted" => <bool: 0x7fff74932320>: true
2/16/13 3:54:24.632 PM com.apple.XType.FontHelper[1406]: AutoActivation: scopes (
"/Library/Application Support/Apple/Fonts"
2/16/13 3:54:24.808 PM com.apple.XType.FontHelper[1406]: FontHelper: message received. (<dictionary: 0x7ffc64800810> { count = 2, contents =
"query" => <string: 0x7ffc64800970> { length = 111, contents = "com_apple_ats_name_postscript == "Arial,BoldItalic" && kMDItemContentTypeTree != com.adobe.postscript-lwfn-font" }
"restricted" => <bool: 0x7fff74932320>: true
2/16/13 3:54:24.809 PM com.apple.XType.FontHelper[1406]: AutoActivation: scopes (
"/Library/Application Support/Apple/Fonts"
2/16/13 3:54:25.052 PM WindowServer[102]: CGXDisableUpdate: UI updates were forcibly disabled by application "Preview" for over 1.00 seconds. Server has re-enabled them.
2/16/13 3:54:25.584 PM WindowServer[102]: reenable_update_for_connection: UI updates were finally reenabled by application "Preview" after 1.53 seconds (server forcibly re-enabled them after 1.00 seconds)
2/16/13 3:54:30.628 PM sandboxd[1401]: ([192]) Mail(192) deny file-read-data /Users/HBrazee/Library/Preferences/com.apple.DownloadAssessment.plist
2/16/13 3:54:49.692 PM mdworker[1411]: Unable to talk to lsboxd
2/16/13 3:54:49.696 PM mdworker[1410]: Unable to talk to lsboxd
2/16/13 3:54:49.818 PM sandboxd[1416]: ([1411]) mdworker(1411) deny mach-lookup com.apple.ls.boxd
2/16/13 3:54:49.823 PM sandboxd[1416]: ([1410]) mdworker(1410) deny mach-lookup com.apple.ls.boxd
2/16/13 3:54:50.000 PM kernel[0]: Sandbox: sandboxd(1416) deny mach-lookup com.apple.coresymbolicationd
2/16/13 3:55:11.964 PM WindowServer[102]: CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
2/16/13 3:55:11.986 PM Mail[192]: open on /Users/HBrazee/Library/Mail/V2/POP-brazee.net/[email protected]/Deleted Messages.mbox/9032643A-C8BE-4195-B233-E5A6A64E535C/Data/4/9/Messages/94057.emlx : No such file or directory
2/16/13 3:57:17.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=1438[GoogleSoftwareUp] clearing CS_VALID
2/16/13 3:57:19.177 PM GoogleSoftwareUpdateDaemon[1440]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending:
com.google.Keystone.Daemon.UpdateEngine: 2 connection(s)
com.google.Keystone.Daemon.Administration: 0 connection(s)
2/16/13 3:57:19.332 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateEngine updateProductID:] KSUpdateEngine updating product ID: "com.google.Keystone"
2/16/13 3:57:19.445 PM GoogleSoftwareUpdateDaemon[1440]: -[KSCheckAction performAction] KSCheckAction checking 1 ticket(s).
2/16/13 3:57:19.554 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction starting update check for ticket(s): {(
<KSTicket:0x585250
productID=com.google.Keystone
version=1.1.0.3659
xc=<KSPathExistenceChecker:0x582eb0 path=/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/>
serverType=Omaha
url=https://tools.google.com/service/update2
creationDate=2010-06-26 00:04:18
>
Using server: <KSOmahaServer:0x292b10
engine=<KSDaemonUpdateEngine:0x287110>
params={
EngineVersion = "1.1.0.3659";
ActivesInfo = {
"com.Google.GoogleEarthPlus.intel" = {
LastRollCallPingDate = 2013-02-16 08:00:38 +0000;
"com.google.Chrome" = {
LastRollCallPingDate = 2013-02-16 08:00:38 +0000;
LastActiveDate = 2012-11-25 19:27:11 +0000;
LastActivePingDate = 2012-11-26 08:00:15 +0000;
"com.google.Keystone" = {
LastRollCallPingDate = 2013-02-16 08:00:39 +0000;
LastActivePingDate = 2013-02-16 08:00:39 +0000;
LastActiveDate = 2013-02-16 22:57:18 +0000;
"com.google.musicmanager" = {
LastActivePingDate = 2012-07-29 06:59:48 +0000;
LastActiveDate = 2012-07-28 19:04:42 +0000;
LastRollCallPingDate = 2013-02-16 08:00:38 +0000;
UserInitiated = 0;
IsSystem = 1;
OmahaOSVersion = "10.8.2_i486";
Identity = KeystoneDaemon;
AllowedSubdomains = (
".omaha.sandbox.google.com",
".tools.google.com",
".www.google.com",
".corp.google.com"
>
2/16/13 3:57:19.867 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction running KSServerUpdateRequest: <KSOmahaServerUpdateRequest:0x2973e0
server=<KSOmahaServer:0x292b10>
url="https://tools.google.com/service/update2"
runningFetchers=0
tickets=1
activeTickets=0
rollCallTickets=0
body=
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<o:gupdate xmlns:o="http://www.google.com/update2/request" protocol="2.0" version="KeystoneDaemon-1.1.0.3659" ismachine="1">
<o:os platform="mac" version="MacOSX" sp="10.8.2_i486"></o:os>
<o:app appid="com.google.Keystone" version="1.1.0.3659" lang="en-us" installage="966" brand="GGLG">
<o:updatecheck></o:updatecheck>
</o:app>
</o:gupdate>
>
2/16/13 3:57:29.555 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction(KSServerUpdateRequestDelegate) serverRequest:fetchedWithResponse:] KSUpdateCheckAction received KSServerUpdateResponse: <KSOmahaServerUpdateResponse:0x298e70
server=<KSOmahaServer:0x292b10>
url="https://tools.google.com/service/update2"
status=200
tickets=1
activeTickets=0
rollCallTickets=0
data=
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<gupdate xmlns="http://www.google.com/update2/response" protocol="2.0" server="prod">
<daystart elapsed_seconds="53810"></daystart>
<app appid="com.google.Keystone" status="ok">
<updatecheck status="noupdate"></updatecheck>
</app>
</gupdate>
>
2/16/13 3:57:29.864 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction(PrivateMethods) finishAction] KSUpdateCheckAction found updates: {( )}
2/16/13 3:57:29.934 PM GoogleSoftwareUpdateDaemon[1440]: -[KSPrefetchAction performAction] KSPrefetchAction no updates to prefetch.
2/16/13 3:57:29.937 PM GoogleSoftwareUpdateDaemon[1440]: -[KSMultiUpdateAction performAction] KSSilentUpdateAction had no updates to apply.
2/16/13 3:57:29.938 PM GoogleSoftwareUpdateDaemon[1440]: -[KSMultiUpdateAction performAction] KSPromptAction had no updates to apply.
2/16/13 3:57:29.942 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateEngine(PrivateMethods) updateFinish] KSUpdateEngine update processing complete.
2/16/13 3:57:30.431 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateEngine updateAllProducts] KSUpdateEngine updating all installed products.
2/16/13 3:57:30.434 PM GoogleSoftwareUpdateDaemon[1440]: -[KSCheckAction performAction] KSCheckAction checking 2 ticket(s).
2/16/13 3:57:30.476 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction starting update check for ticket(s): {(
<KSTicket:0x28ec80
productID=com.google.Chrome
version=24.0.1312.57
xc=<KSPathExistenceChecker:0x29adc0 path=/Applications/Google Chrome.app>
serverType=Omaha
url=https://tools.google.com/service/update2
creationDate=2010-06-18 13:11:31
tagPath=/Applications/Google Chrome.app/Contents/Info.plist
tagKey=KSChannelID
brandPath=/Library/Google/Google Chrome Brand.plist
brandKey=KSBrandID
versionPath=/Applications/Google Chrome.app/Contents/Info.plist
versionKey=KSVersion
>,
<KSTicket:0x29fe80
productID=com.google.Keystone
version=1.1.0.3659
xc=<KSPathExistenceChecker:0x2977f0 path=/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/>
serverType=Omaha
url=https://tools.google.com/service/update2
creationDate=2010-06-26 00:04:18
>
Using server: <KSOmahaServer:0x595c80
engine=<KSDaemonUpdateEngine:0x287110>
params={
EngineVersion = "1.1.0.3659";
ActivesInfo = {
"com.Google.GoogleEarthPlus.intel" = {
LastRollCallPingDate = 2013-02-16 08:00:38 +0000;
"com.google.Chrome" = {
LastRollCallPingDate = 2013-02-16 08:00:38 +0000;
LastActiveDate = 2012-11-25 19:27:11 +0000;
LastActivePingDate = 2012-11-26 08:00:15 +0000;
"com.google.Keystone" = {
LastRollCallPingDate = 2013-02-16 08:00:39 +0000;
LastActivePingDate = 2013-02-16 08:00:39 +0000;
LastActiveDate = 2013-02-16 22:57:18 +0000;
"com.google.musicmanager" = {
LastActivePingDate = 2012-07-29 06:59:48 +0000;
LastActiveDate = 2012-07-28 19:04:42 +0000;
LastRollCallPingDate = 2013-02-16 08:00:38 +0000;
UserInitiated = 0;
IsSystem = 1;
OmahaOSVersion = "10.8.2_i486";
Identity = KeystoneDaemon;
AllowedSubdomains = (
".omaha.sandbox.google.com",
".tools.google.com",
".www.google.com",
".corp.google.com"
>
2/16/13 3:57:30.577 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction running KSServerUpdateRequest: <KSOmahaServerUpdateRequest:0x290140
server=<KSOmahaServer:0x595c80>
url="https://tools.google.com/service/update2"
runningFetchers=0
tickets=2
activeTickets=0
rollCallTickets=0
body=
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<o:gupdate xmlns:o="http://www.google.com/update2/request" protocol="2.0" version="KeystoneDaemon-1.1.0.3659" ismachine="1">
<o:os platform="mac" version="MacOSX" sp="10.8.2_i486"></o:os>
<o:app appid="com.google.Chrome" version="24.0.1312.57" lang="en-us" installage="974" brand="GGRM">
<o:updatecheck></o:updatecheck>
</o:app>
<o:app appid="com.google.Keystone" version="1.1.0.3659" lang="en-us" installage="966" brand="GGLG">
<o:updatecheck></o:updatecheck>
</o:app>
</o:gupdate>
>
2/16/13 3:57:31.427 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction(KSServerUpdateRequestDelegate) serverRequest:fetchedWithResponse:] KSUpdateCheckAction received KSServerUpdateResponse: <KSOmahaServerUpdateResponse:0x29a970
server=<KSOmahaServer:0x595c80>
url="https://tools.google.com/service/update2"
status=200
tickets=2
activeTickets=0
rollCallTickets=0
data=
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<gupdate xmlns="http://www.google.com/update2/response" protocol="2.0" server="prod">
<daystart elapsed_seconds="53812"></daystart>
<app appid="com.google.Chrome" status="ok">
<updatecheck status="noupdate"></updatecheck>
</app>
<app appid="com.google.Keystone" status="ok">
<updatecheck status="noupdate"></updatecheck>
</app>
</gupdate>
>
2/16/13 3:57:31.430 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction(PrivateMethods) finishAction] KSUpdateCheckAction found updates: {( )}
2/16/13 3:57:31.479 PM GoogleSoftwareUpdateDaemon[1440]: -[KSPrefetchAction performAction] KSPrefetchAction no updates to prefetch.
2/16/13 3:57:31.480 PM GoogleSoftwareUpdateDaemon[1440]: -[KSMultiUpdateAction performAction] KSSilentUpdateAction had no updates to apply.
2/16/13 3:57:31.482 PM GoogleSoftwareUpdateDaemon[1440]: -[KSMultiUpdateAction performAction] KSPromptAction had no updates to apply.
2/16/13 3:57:31.487 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateEngine(PrivateMethods) updateFinish] KSUpdateEngine update processing complete.
2/16/13 3:57:33.732 PM GoogleSoftwareUpdateDaemon[1440]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending:
com.google.Keystone.Daemon.UpdateEngine: 1 connection(s)
com.google.Keystone.Daemon.Administration: 0 connection(s)
2/16/13 3:57:49.201 PM GoogleSoftwareUpdateDaemon[1440]: -[KeystoneDaemon main] GoogleSoftwareUpdateDaemon inactive, shutdown.
2/16/13 3:58:22.082 PM mdworker[1575]: Unable to talk to lsboxd
2/16/13 3:58:22.088 PM mdworker[1576]: Unable to talk to lsboxd
2/16/13 3:58:24.000 PM kernel[0]: Sandbox: sandboxd(1580) deny mach-lookup com.apple.coresymbolicationd
2/16/13 3:58:25.365 PM sandboxd[1580]: ([1575]) mdworker(1575) deny mach-lookup com.apple.ls.boxd
2/16/13 3:58:25.469 PM sandboxd[1580]: ([1576]) mdworker(1576) deny mach-lookup com.apple.ls.boxd
2/16/13 3:59:36.358 PM mdworker[1587]: Unable to talk to lsboxd
2/16/13 3:59:36.362 PM mdworker[1586]: Unable to talk to lsboxd
2/16/13 3:59:36.503 PM sandboxd[1588]: ([1587]) mdworker(1587) deny mach-lookup com.apple.ls.boxd
2/16/13 3:59:36.508 PM sandboxd[1588]: ([1586]) mdworker(1586) deny mach-lookup com.apple.ls.boxd
2/16/13 3:59:36.000 PM kernel[0]: Sandbox: sandboxd(1588) deny mach-lookup com.apple.coresymbolicationd
2/16/13 4:00:08.980 PM firefox[1592]: invalid drawable
2/16/13 4:00:10.701 PM WindowServer[102]: CGXDisableUpdate: UI updates were forcibly disabled by application "Firefox" for over 1.00 seconds. Server has re-enabled them.
2/16/13 4:00:10.813 PM WindowServer[102]: reenable_update_for_connection: UI updates were finally reenabled by application "Firefox" after 1.11 seconds (server forcibly re-enabled them after 1.00 seconds)
2/16/13 4:00:24.543 PM com.apple.usbmuxd[27]: _SendAttachNotification (thread 0x7fff73d59180): Device 1c:ab:a7:98:32:58@fe80::1eab:a7ff:fe98:3258._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
2/16/13 4:00:26.787 PM SyncServer[1604]: [0x7f9f7ac0bec0] |DataManager|Warning| Client com.apple.Mail sync alert tool path /System/Library/Frameworks/Message.framework/Resources/MailSync does not exist.
2/16/13 4:00:30.376 PM mdworker[1594]: Unable to talk to lsboxd
2/16/13 4:00:30.379 PM mdworker[1595]: Unable to talk to lsboxd
2/16/13 4:00:30.468 PM sandboxd[1606]: ([1594]) mdworker(1594) deny mach-lookup com.apple.ls.boxd
2/16/13 4:00:30.481 PM sandboxd[1606]: ([1595]) mdworker(1595) deny mach-lookup com.apple.ls.boxd
2/16/13 4:00:30.000 PM kernel[0]: Sandbox: sandboxd(1606) deny mach-lookup com.apple.coresymbolicationd
2/16/13 4:00:43.702 PM iTunes[203]: _NotificationSocketReadCallbackGCD (thread 0x7fff73d59180): Unexpected connection closure...
2/16/13 4:00:43.705 PM ath[254]: _NotificationSocketReadCallbackGCD (thread 0x7fff73d59180): Unexpected connection closure...
2/16/13 4:01:42.495 PM mdworker[1611]: Unable to talk to lsboxd
2/16/13 4:01:42.499 PM mdworker[1612]: Unable to talk to lsboxd
2/16/13 4:01:42.599 PM sandboxd[1613]: ([1611]) mdworker(1611) deny mach-lookup com.apple.ls.boxd
2/16/13 4:01:42.608 PM sandboxd[1613]: ([1612]) mdworker(1612) deny mach-lookup com.apple.ls.boxd
2/16/13 4:01:42.000 PM kernel[0]: Sandbox: sandboxd(1613) deny mach-lookup com.apple.coresymbolicationd
2/16/13 4:02:01.167 PM WindowServer[102]: CGXSetWindowProperty: Invalid window 0x131
2/16/13 4:02:01.167 PM WindowServer[102]: kCGErrorIllegalArgument: _CGXAddWindowToWindowOrderingGroup: error setting window property
2/16/13 4:02:29.971 PM KernelEventAgent[45]: tid 00000000 received event(s) VQ_LOWDISK (4)
2/16/13 4:02:29.972 PM KernelEventAgent[45]: tid 00000000 type 'hfs', mounted on '/Volumes/FreeAgent GoFlex Drive', from '/dev/disk1s3', low disk
2/16/13 4:02:29.000 PM kernel[0]: HFS: Low Disk: Vol: FreeAgent GoFlex Drive freeblks: 38399, warninglimit: 38400
2/16/13 4:02:55.923 PM KernelEventAgent[45]: tid 00000000 received event(s) VQ_LOWDISK, VQ_VERYLOWDISK (516)
2/16/13 4:02:55.000 PM kernel[0]: HFS: Vol: FreeAgent GoFlex Drive Very Low Disk: freeblks: 25599, dangerlimit: 25600
2/16/13 4:02:55.926 PM KernelEventAgent[45]: tid 00000000 type 'hfs', mounted on '/Volumes/FreeAgent GoFlex Drive', from '/dev/disk1s3', low disk, very low disk
2/16/13 4:02:55.929 PM mds[39]: (Warning) Volume: Indexing reset and suspended on backup volume "/Volumes/FreeAgent GoFlex Drive" because it is low on disk space.
2/16/13 4:03:40.000 PM kernel[0]: memorystatus_thread: idle exiting pid 1474 [cfprefsd]
2/16/13 4:03:43.211 PM com.apple.launchd[1]: (com.apple.XType.FontHelper[1406]) Exited: Killed: 9
2/16/13 4:03:43.000 PM kernel[0]: (default pager): [KERNEL]: ps_select_segment - send HI_WAT_ALERT
2/16/13 4:03:43.000 PM kernel[0]: macx_swapon SUCCESS
2/16/13 4:03:43.000 PM kernel[0]: memorystatus_thread: idle exiting pid 1406 [XType.FontHelper]
2/16/13 4:03:52.000 PM kernel[0]: (default pager): [KERNEL]: ps_select_segment - send HI_WAT_ALERT
2/16/13 4:03:52.000 PM kernel[0]: macx_swapon SUCCESS
2/16/13 4:03:52.849 PM com.apple.launchd[1]: (com.apple.iCloudHelper[1218]) Exited: Killed: 9
2/16/13 4:03:52.000 PM kernel[0]: memorystatus_thread: idle exiting pid 1218 [com.apple.iCloud]
2/16/13 4:03:53.571 PM mdworker[1619]: Unable to talk to lsboxd
2/16/13 4:03:53.000 PM kernel[0]: Sandbox: sandboxd(1627) deny mach-lookup com.apple.coresymbolicationd
2/16/13 4:03:53.585 PM mdworker[1622]: Unable to talk to lsboxd
2/16/13 4:03:53.672 PM sandboxd[1627]: ([1619]) mdworker(1619) deny mach-lookup com.apple.ls.boxd
2/16/13 4:03:53.677 PM sandboxd[1627]: ([1622]) mdworker(1622) deny mach-lookup com.apple.ls.boxd
2/16/13 4:03:53.690 PM mdworker[1621]: Unable to talk to lsboxd
2/16/13 4:03:53.692 PM mdworker[1620]: Unable to talk to lsboxd
2/16/13 4:03:53.711 PM sandboxd[1627]: ([1621]) mdworker(1621) deny mach-lookup com.apple.ls.boxd
2/16/13 4:03:53.786 PM sandboxd[1627]: ([1620]) mdworker(1620) deny mach-lookup com.apple.ls.boxd
2/16/13 4:04:05.629 PM KernelEventAgent[45]: tid 00000000 received event(s) VQ_LOWDISK (4)
2/16/13 4:04:05.629 PM KernelEventAgent[45]: tid 00000000 type 'hfs', mounted on '/Volumes/FreeAgent GoFlex Drive', from '/dev/disk1s3', low disk
2/16/13 4:04:21.928 PM com.apple.backupd[1325]: Stopping backup.
2/16/13 4:04:21.954 PM com.apple.backupd[1325]: Error: (-34) SrcErr:NO Copying /Users/HBrazee/Documents/Virtual Machines.localized/Microsoft Windows XP.vmwarevm/winxp-s003.vmdk to /Volumes/FreeAgent GoFlex Drive/Backups.backupdb/Howard Brazee’s Computer/2013-02-15-184254.inProgress/07592BCC-A3D7-4879-B08D-C01FDDF1895A/Maci ntosh HD/Users/HBrazee/Documents/Virtual Machines.localized/Microsoft Windows XP.vmwarevm
2/16/13 4:05:16.286 PM com.apple.backupd[1325]: Copied 14628 files (14.03 GB) from volume Macintosh HD.
2/16/13 4:05:16.286 PM com.apple.backupd[1325]: Copy stage failed with error:28>>> Enter Time Machine and manually delete unnecessary backups to make
>>> sufficient room for new ones.
>>
>>
>> I haven't figured out how to do this. Where is this setting?
>
> I have not figured this out either. But there is a command line
> program tmutil (time machine utility) that can delete backups, and
> also do much more. I am not an expert in this area, so I can only
> suggest that you open a Terminal.app and type
> man tmutil
>
> Be careful Howard. If Time Machine is not able to delete old backup
> jobs, something is wrong with your backup disk.
If I recall correctly you do this by going on to TM and using one of the
pull down menus in the top apple menu strip ....
I myself am having problems with TM. I erased the external target disk and
started TM again. However it stops wverytime and refuses to backup ..
Telling me there isn't enough room even though the ext space is much
bigger. It also quotes the size of my HD content about 20% bigger than
finder says weird.
Howard (another one...)
============
1. Enter the time Machine
2. Scroll back it time for a few generations
3. Select the folder(s) to delete
4. Under the "Action" item (or gear icon), select the delete option you
want.
=================
> The last couple of days my Time Machine has run out of space during
> backups (error 28).
Just to be certain, is that really "28" or is it "-28"? (I assume it is
a positive error number, as error -28 is
> In the past, when I've seen this, I just say OK, and the problem goes away
> by itself, as it clears up space.
>
> My FreeAgent GoFlex Drive is 1 TB, while my Mac drive is 500.11 GB.
>
> I tried using Disk Utility to fix permissions, but those buttons were
> greyed out. Disk Utility did not find any problem with the disk.
Repair Permissions is not relevant for Time Machine backups. It only
repairs permissions on files installed by the OS X Installer application
(or the OS installation or preinstalled OS, or Software Update). TM
backups don't qualify.
In any case, Time Machine deletes old backups using root privileges so
it doesn't care about permissions on the backup drive.
> Time Machie preferences show 13.3 GB of 1 TB available.
>
> I haven't been adding stuff to my computer lately more than getting
> mail.
>
> Oldest backup: December 29, 2012
> Latest backup: February 15, 2013
>
> Excluded from backups is the backup drive, my downloads folder, and my
> Mobile Documents folder.
>
> Estimated size of full backup 397.5 GB
Something odd is happening here. Given your described usage, you should
not be chewing through 1 TB of backups in less than three months. I've
gone more than a year on a drive with a similar ratio and not filled it
(and I am backing up my downloads, sometimes two or three times as I
move them to other folders).
Has anything major been done to the computer within that timeframe, e.g.
installing a new hard drive, or erasing the main drive and restoring
from backup? If so, that drive is treated as a new one and would require
another full backup, leaving the old one there.
A similar possibility is if Time Machine thought the computer had been
replaced, which would result in a new backup being started, and would
also leave the old backup unable to be deleted automatically.
In this case, you wouldn't be able to directly access the backups prior
to the change using "Enter Time Machine", but could get to them by
holding down the Option key and choosing "Browse Other Backup Disks"
from the Time Machine menu.
> What suggestions do you have for me to resolve this issue.
Which OS X version are you running?
Have a look in system.log (using Console) to see if Time Machine logged
any relevant information when the backup failed. Look for references to
"backupd" (which is the background software which does Time Machine
backups).
============= -
Time Machine backups to OS X Server intermittently failing with error 21
I have a Mac Mini running OS X Server, with two USB drives connected and selected within OS X Server as Time Machine backup destinations. I have an iMac and a Macbook Air, both of which are using Time Machine to backup themselves up to the Time Machine Service on the server (all are running the latest version of Mavericks).
Intermittently, the iMac backup fails. The iMac's console log shows:
Aug 23 13:55:34 Nigels-iMac.local com.apple.backupd[15418]: Failed to eject volume /Volumes/Backups-1 (FSVolumeRefNum: -141; status: -47; dissenting pid: 0)
Aug 23 13:55:34 Nigels-iMac.local com.apple.backupd[15418]: Waiting 60 seconds and trying again.
Aug 23 13:56:06 Nigels-iMac.local mds[72]: (Normal) Volume: volume:0x7fa702995000 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/Backups-1
Aug 23 13:56:45 Nigels-iMac.local com.apple.backupd[15418]: Network destination already mounted at: /Volumes/Backups-1
Aug 23 13:57:29 Nigels-iMac.local com.apple.backupd[15418]: Quota in effect for '/Volumes/Backups-1': Zero KB
Aug 23 13:58:16 Nigels-iMac.local com.apple.backupd[15418]: Failed to eject volume /Volumes/Backups-1 (FSVolumeRefNum: -141; status: -47; dissenting pid: 0)
Aug 23 13:58:16 Nigels-iMac.local com.apple.backupd[15418]: Giving up after 3 retries.
Aug 23 13:58:16 Nigels-iMac.local com.apple.backupd[15418]: Backup failed with error 21: 21
The Mac Mini console log shows nothing apparently wrong.
Restarting the server (not the iMac) clears the problem and the iMac will then once again backup to the server for some time (e.g. a day).
There are two USB drives, one for each backup sparse bundle and although the two disks have different names in the Finder, OS X Server has named them both Backup (one is shown as 'Backup' and the other as 'Backup-1' in the Time Machine Services Backups tab).
I am wondering whether the failure occurs when coincidentally the iMac and the Macbook both try to back up at the same moment. Any advice about how to isolate the problem, or a solution would be gratefully received!1. This procedure is a diagnostic test, to be carried out on the server. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Hi,
I'm using Project Server 2013 and I'm not able to publish a workflow in SharePoint Designer 2013, I get this error:
System.InvalidOperationException: Operation failed with error Microsoft.Workflow.Client.ScopeInactiveException: Scope '/SharePoint/default/d7feb9ea-ccb2-4ec3-8f89-2a45b6cf3777' is not in an active state. Its current
state is 'Unregistering'. HTTP headers received from the server - ActivityId: c47ef567-8c54-4ae0-9a1a-1e4fb51320d8. NodeId: TestServer. Scope: /SharePoint/default/d7feb9ea-ccb2-4ec3-8f89-2a45b6cf3777. Client ActivityId : c6e5979c-20f8-e042-1f9d-2cb2a25d7f9e.
---> System.Net.WebExceptio
The thing is that I transferred the databases from a Prod.Env. to the Test Env. and from that moment on the Test Env. stopped working (only workflows), then I
was thinking that maybe the workflow is not working in the Test Environment because when I transferred the databases from Prod Env to Test Env I didn’t transfer the databases related to workflow, I only transferred:
WSS_Content
PWA_ServiceDB
But I didn’t transfer:
SBGatewayDatabase
SBManagementDB
SBMessageContainer01
WFInstanceManagementDB
WFManagementDB
WFResourceManagementDB
I didn’t transfer them because, before, when I transferred DB’s in version 2010, these DB’s were not needed, as the workflows were done using another method.
So, I tried to create a new workflow in the Test Env. but there is no way, I always get that error.
I've tried to Register again the workflow, and the result looks ok, but it doesn't solve the problem:
Register-SPWorkflowService
–SPSite "http://whatever/PWA"
–WorkflowHostUri "http://TestServer:12291"
–AllowOAuthHttp -Force
Do you know how to solve this issue or have an idea to give me some light?
Thank you for your help and regards,
José EspasesLooks like you haven't defined the WF scope or the site where you are trying to deploy the workflow to isn't included in the scope
Check this article
http://fangdahai.blogspot.in/2013/04/on-premise-windows-workflow-server.html
Thanks | epmXperts | http://epmxperts.wordpress.com
Maybe you are looking for
-
Parsing xml in clob field remove non utf-8 characters
hi all, i have an issue where a stored procedure runs during a nightly process and parses xml contained in a clob field. There are some records that contain non-utf8(they paste characters from word)characters and therefore the parse fails when using
-
Artwork doesn't show with version 5.0.1
I updated my ipod with the iOS 5.0.1. The album artwork doesn't show even if they all appears in Itune. Any idea to resolve this problem?
-
Where I can find "" JAVASUP.VXD "" PLEASE HELP ME
My computer is asking me for a JAVASUP.VXD file I don't know where I can get that file OR if I can change the setting of my computer to prevent this situation. PLESE let me know THANK YOU
-
JDialog woes, has anyone solved these yet?
I can't seem to find a solution to the following two JDialog problems. They seem to have existed for a few years, but I can't find a solution. 1. Any JDialog windows that I use doesn't take the icon of it's parent frame. Just a cosmetic thing, but I
-
Visual Studio 2008 & Oracle Problem
Hi there, I've been going through a bunch of legacy reports in a project I support, they had got out of date with the database, so I was verifying the database for each one. They use data from an Oracle 10g database using a mixture of tables and view