DCF/Download/ Wifi is not working after firmware ...

I have upgraded my nokia 5800, After upgrading the firmware i am facing three big problem. They are:-
1. DCF file is not opening (Known as license )
2. Download - Forever updating view no result.
3. Wifi- Droping frequently connection .
Pl advice
Thanks in advance.

Wi-Fi greyed out

Similar Messages

My Wifi is not working after re setting the net work also

My Wifi is not working after re setting the network also.

Read here:
http://support.apple.com/kb/ts1559
If nothing helps, make an appointment at any Apple store.

HT1414 wifi will not work after restore

wifi will not work after restore

Se emy response to your other post
https://discussions.apple.com/thread/4862098?tstart=0

Wifi is not working after update to ios5.0.1 in my iPhone 4s

Recently I update to new version of ios5 after that my wifi connectionis not working .can any one resolve this problem please?

I had the same issue before. But not any more....
Step1: Turn off your phone.
Step2: Unplug the router from supply.and turning off is different. So unplug it.
Step3: turn on router and phone back.
Try connecting now; which should work ....
This fixed my phone
Check it out.....

HT204409 wifi will not work after restore

my wifi will not work at all

Does the iPod connect to other networks?
Does the iPod see the network?
Any error messages?
Do other devices now connect?
Did the iPod connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

HP 5524 Wireless does not work after firmware upgrade

HI,
I have just purchased an HP5524. After initial problems setting up the WPA key from the printer screen, I connected via USB, found the printer and swapped to wireless successfuly. I then installed the printer software on all my computers at home successfully over wireless.
The printer then needed a firmware upgrade to support eprint (?), which is successfully connected, downloaded the fireware, installed and went through the boot cycles successfully.
However, ever since wireless will not work. Before I return it to the retailer as "not fit for purpose" I thought I would ask the forum. The diagnostics downloaded a tool, which I went through, but this did not offer solutions that I had not already tried.
Thank you

Hi,
Thank you for posting you query,
In order to resolve the issue, please make sure the printer is placed closer to the router and uninstall the printer drivers already installed and then start the instalaltion and seelct teh connection type as wireless network. Then select use USB to configure wireless and when prompted conenct the USB cable and then select the network and enter the encryption key follow the onscreen instructions.
If the issue still persisits, please open the browser and in the address bar enter the IP address of the router and click on GO. This will take you to the router configuration page. On the router page, please click on Wireless Setup and please make sure SSID Broadcast is enabeld and the Wireless Mode is set to Mixed or 802.11 B/G/N and the Wireless Channel is set to 11 and click on Apply. Then try to connect the printer to the network by using the CD.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

Wifi sync not working after ios6

I have upgraded all my devices to latest ios6 and now wifi sync does not work. I have 2 devices syncing to windows Xp laptop which are not syncing. I also have an additional iPad syncing to my iMac. None of them are working as of late. Tried rebooting everything and wifi sync is intermittent at best. Bottom line, seems like an ios6 problem, but not finding a lot of help. Any suggestions?

Ironically, updating to iOS 6.0.1, at least for now - seems to have made WiFi sync more reliable for me on my iPad 3, and my MacBook running OS X 10.7.4 and the latest version of iTunes.
if you have quit iTunes, rebooted your devices and restarted the computers and that didn't help, this is what I would suggest next ... And in no particular order.
Turn WiFi off on your iPad, restart it and then turn WiFi on again.
Try rebooting your router. Even though you may have Internet connectivity with all devices, rebooting the router might just work anyway.
Connect the iPad to your computer and launch iTunes, select the iPad under devices, click on the Summary Tab and uncheck Sync this iPad over WiFi. Click on Apply in the lower right corner. Sync your iPad. After the sync completes, go back to the Summary Tab. Click on Sync this iPad over WiFi. Click on Apply and wait for the changes to be applied. Quit iTunes and disconnect the iPad.
Restart your computer, launc iTunes again and see if it works now,

SB wow wireless not working after firmware upgrade

Hello,
In the beginning of this year I bougth a pair of Sound Blaster World of warcraft wireless headset. And there have been alot of trouble with them, I've been using the latest software but not the latest firmware ever since then.
And every now and then my mic stop to work, I could hear sound but the mic was totally dead, and all of a sudden, of no logical reason the mic started to work agian.
So I thought a firmware upgrade could make them work better, but no, i upgrade firmware from .9.x to .0.x.
And guess what happens? Nothing works no, not the sound, not the mic, the USB trasmitter cant even sync with the headset anymore.
Ive tried a million things now, some of them are:
. Just tried to reinstall it, didnt work
2. Tried to install it in winxpsp3 compability mode, didnt work.
3. Tried to clear all temp-folder (the temp-folder under c:\windows\temp and the user-temp) after Ive uninstalled it, didnt work.
Im running on Windows 7 Professional x64 edition.
What could cause this? I havnt tried to install them on a XP-computer yet tho. But I have to get them work in Win7, since i cant downgrade just because of a headset, huh?
Thanks,
Johan

Ok, please redirect me to a tecnical supportpage where I can find potential solutions,
- and instructions how I do for example a downgrade of firmware?
PS, This page does not include any potential solution:
http://support.creative.com/Products...tDetails.aspx?
catID=437&CatName=Headphones+%26+Headsets&subCatID =23&subCatName=MIDI+Keyboards&prodID=9068&prodName =Sound+Blaster+World+of+Warcraft+Wireless+Headset& bTopTwenty=&VARSET=prodfaqRODFAQ_9068,VARSET=CategoryID:437

ITunes WiFi sync not working after Lion reinstall

Hello all,
Here is the situation. Wifi syncing was working superbly well for both my iPhone and my iPad. They could be upstairs while I was downstairs in my office and I would see them both in iTunes and could sync them at will. Great stuff!
Until yesterday. I bought a new hard drive for my Macbook Pro, installed Lion on it and imported all of my apps and settings on it. Everythings works fine EXCEPT for wifi syncing. When I plug my devices to the USB cable I see them appear in the iTunes sidebar but I soon as I disconnect them, POOF! They're gone!
The checkbox IS checked. I tried unchecking it, syncing via USB, rechecking it an resyncing to no avail. I just can't get the darned thing to work again!
Both devices and the laptop have been restarted multiple times.
Any ideas?
Thanks!

Can't believe it was so simple.
I just restarted my Mac and everything came back to normal.
Ok then sorry for the disturbance, move along, nothing to see here.

My iphone 4s wifi iz not working after upgrading to ios 7.1

any sugestions ???

We need more info to troubleshoot. What do you mean by "not working?" Wireless switch is on? Home router or public networks? Please be more detailed in describing your issues.

HP M451dn AirPrint Not Working After Firmware Upgrade

Hello All,
Just setup and brand new HP Laserjet 400 color M451dn.
Since this does not have the WiFi option, I connected it via Ethernet cable directly to my NetGear WNDR4300 (N750) WiFi Router, so folks in my office with iPads/iPhones can AirPrint to it.
This worked great, out of the box! iPad/iPhone users could join the WiFi network, and then see the printer with no problem.
However, after updating the printer to the latest firmware (20140708) the iPads/iPhones can no longer find the printer!
The Config Report still shows AirPrint as one of the "Installed Personalities and Options", however, the web-based printer interface does not show Bonjour as one of the Networking options in the Networking menu. (It shows IPv4 and IPv6 only)
I have tried the following sequence without success:
1. Power-off the M451dn printer.
2. Power-off the Netgear WNDR4300 (N750) router, wait 30-sec, and power-on.
3. Wait 2-3 minutes for Netgear to sync-up after power-up.
4. Turn-on M451dn.
5. Try finding M451dn with iPad.
Still getting "No printers found..."
So, did I do something wrong in upgrading the firmware?
Or do I have to somehow re-enable the AirPrint option?
Please help, as I am now most hated amongst the Apple crowd at the office.
Bob

Hi @ElBobo
I suspect your question would be better answered in the HP Enterprise Business Community, as the HP LaserJet Pro 400 color Printer M451nw is a commercial model.
My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
Click here to view the Printing and Digital Imaging. When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
You may find the HP LaserJet Pro 400 color Printer M451nw support page helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
Best of luck.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Phone not working after firmware update for nokia ...

I tried updating my nokia 5800 today when the new firmware was released. i have already updated my other phone including another 5800. But when I updated the firmware of another 5800 (my 5800 through nokia software updater from pc/laptop), after the nokia updater application said that the update was successful, my phone showed the nokia logo with the new firmware version. It's supposed to reboot automatically and continue as normal but after waiting for like 15 minutes, my phone's still not turning on and still showed on the screen that the phone was not connected. That's when I unplugged it off from the USB cable and tried to turn it on, but it will just vibrate for a few seconds and then nothing! It won't turn on or work! I've tried to search on how to fix this problem but to no avail.. please help me.. is my phone going to work again?
Solved!
Go to Solution.

There's a section in this forum called the "Pool of Knowledge". Have you followed the instructions in this post in the PoK?
/discussions/board/message?board.id=topfaq&thread.id=112
Message Edited by grschinon on 02-Nov-2009 06:05 PM
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

To Apple engineers: Home sharing and wifi sync not working after fresh install

Have been using wifi sync and home sharing on my Macbook 5,1 since its early debut.
Since Macbook 5,1 is old i am using it to stream MP4 files to my Apple TV.
The functionality has been working fine throughout the OSX iterations; then came Mavericks.
Now my iTunes library will not sync with Apple TV3, nor will my iPhone 5/iPad 3 wirelessly sync with my iTunes library.
For some reason since upgrading to Mavericks the thing wont work under normal boot.
Restarting in Safe mode solves the problem. Assuming it was some erroneous configuration i went through troubleshooting steps to try and resolve it.
First i uninstalled any third party apps.
Then i repaired, went through Maintenance and Cleaning of the system using Onyx
Then i tried manually removing third party boot kexts from the System Library and user Library
Then i tried reinstalling OSX via the recovery partition (cmd+r on boot time)
Finally i tried a full system erase and reinstall via an external bootable Mavericks USB.
After all these steps the problem persists.
There should be no hardware failure since it works fine in Safe mode and doing a clean install verifies that there are no third party conflicts with the system since iTunes was executed immediately after booting up for the first time.
This raises the concern that there seems to be some sort of system kext misconfiguration by the Apple engineers.
When executing iTunes the following errors are being displayed in the system log (via Console):
22/07/14 20:09:41,949 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 1
22/07/14 20:09:41,954 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 2
22/07/14 20:09:41,958 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 3
22/07/14 20:09:41,962 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 4
22/07/14 20:09:41,966 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 6
22/07/14 20:09:41,970 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 7
22/07/14 20:09:41,974 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 8
22/07/14 20:09:41,978 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 9
22/07/14 20:09:41,982 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 10
22/07/14 20:09:41,987 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 11
22/07/14 20:09:41,991 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 12
22/07/14 20:09:41,995 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 13
22/07/14 20:09:41,999 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 14
22/07/14 20:09:42,004 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 15
22/07/14 20:09:42,008 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 16
22/07/14 20:09:42,012 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 17
22/07/14 20:09:42,016 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 18
22/07/14 20:09:42,020 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 19
22/07/14 20:09:42,024 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 20
22/07/14 20:09:42,028 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 21
22/07/14 20:09:42,032 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 22
22/07/14 20:09:42,036 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 23
22/07/14 20:09:42,041 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 24
22/07/14 20:09:43,034 mDNSResponder[57]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F91A980CD60 Christophoross-MacBook.local. (AAAA) that's already in the list
22/07/14 20:09:43,034 mDNSResponder[57]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F91A980D1F0 2.0.6.6.4.5.E.F.F.F.2.1.3.2.2.0.0.0.0.0.0.0.0.0.0.0.0.0.0.8.E.F.ip6.arpa. (PTR) that's already in the list
22/07/14 20:09:43,034 mDNSResponder[57]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F91AA016F60 Christophoross-MacBook.local. (Addr) that's already in the list
22/07/14 20:09:43,034 mDNSResponder[57]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F91AA0173F0 5.1.168.192.in-addr.arpa. (PTR) that's already in the list
22/07/14 20:09:43,088 com.apple.usbmuxd[42]: LOCKDOWN_V2_BONJOUR_SERVICE_NAME is _apple-mobdev2._tcp,921707f2
22/07/14 20:09:43,140 xpcd[196]: restored permissions (100600 -> 100700) on /Users/christophoros/Library/Containers/com.apple.MediaLibraryService/Container.plist
22/07/14 20:09:43,466 com.apple.SecurityServer[14]: Session 100020 created
I hope someone came across a similar issue and has some light to shed on the matter.
This has been ongoing since Mavericks came out.
Thanks for reading through

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own"

WiFi is not working after iOS6 update. iPad and iPhone will not connect to WiFi.

After updating ios6. My iPad (new iPad) and iPhone 4 both stopped connecting to my wifi. I have never has connection troubles with wifi.

I had the same issue before. But not any more....
Step1: Turn off your phone.
Step2: Unplug the router from supply.and turning off is different. So unplug it.
Step3: turn on router and phone back.
Try connecting now; which should work ....
This fixed my phone
Check it out.....

The wifi does not work after update 5.1.1

After I upgraded my Iphone 4 to IOS 5.1, the problem had wifi to connect to the wifi network is always seeking and never shows any network, my husband and I can connect does not mean it's my phone, he has not done the update.

Thank you very much!! There are solutions for complex problems in this world because of persons like you!!

DCF/Download/ Wifi is not working after firmware ...

Similar Messages

Maybe you are looking for