DCFilterCallbacks of level 2.0 or higher requested when working with WF

Hi,
I'm trying to create a workflow which include a Content ID 'test_blog_cdf_blog' with 2 contributors users.
I defined step to this workflow and a content id and contributors...
When i'm trying to get to contributor mode on this conent i got this error:
ERROR: Cannot read Content ID 'test_blog_cdf_blog'
REASON: Unable to download 'TEST_BLOG_CDF_BLOG'. Error: SiteStudioExternalApplications component needs DCFilterCallbacks of level 2.0 or higher
Is anybody has any idea to solve this problem?
Thanks, Eran
Edited by: 860009 on 03:16 05/06/2011

Hi,
I am already installed all the site studio components including the ssxa...
any idea?
is there any option to update component's level?
Eran

Similar Messages

Certificate request not working with web server v2 template on windows 2012 R2

I have tried to generate a certificate request on my domain joined Windows 2012 R2. I have tried both online and offline requests. I am using the web server v2 template.
Both Method fails with error message that the cryptographic algorithm is unknown. I am using these settings apart from the template:
This is the error Message in online request:
The error Message in the offline request is somewhat similar.
An event error is also appearing in the application log:
The CSPs from the template:
I am wondering if a cryptographic service provider or several of them are missing? They are installed With Windows update are they not? The strange thing is that this supposedly have worked before with another user. Could it be that I do not have the
correct permissions to request a certificate with this template, or has something happened with the server?

Hey dag
Thanks for posting ,
If You try duplicate the web template for using it in version 4 - can You see any difference?
Also check the link below for certificate templates versions:
http://social.technet.microsoft.com/wiki/contents/articles/13303.windows-server-2012-certificate-template-versions-and-options.aspx#Version_4_Certificate_Templates
In previous operating system versions the configuration of CSPs and KSPs were on different tabs in the certificate properties. For version 2 certificate templates, CSPs were configured on the Request Handling tab. For version 3 certificate templates,
KSPs were configured on the Cryptography tab. Starting in Windows Server 2012, the configuration of the providers is consolidated on the Cryptography tab. To learn more about the cryptographic provider options present in previous operating systems
Notice later.
I'd be glad to answer any question

Not seeing a DataType.ICON request when browsing with Adobe Bridge?

Hi All,
I have followed the instructions in the "Customizing the UI->Displaying Thumbnails" section of the Adobe Drive SDK documents, but I have a problem. When I browse through my drive with Adobe Bridge, I am not getting the expected request for DataType.ICON for any of my items; when I call item.getDataTypes() from my
IGetAssetsHandler, I only see the DataTypes [BASIC, ASSET_PROPERTY].
Any ideas as to why this might be is happening?

In your ConnectHandler implementation, add the following capability:
capabilities.add(Capability.READ_XMP_METADATA);
I spent a week to figure it out.

How to create a certificate signing request that works with Microsoft CA

Hi, I have created a certificate signing request file with keytool. When I try to create a certificate from it with CertReq (I use a Microsoft CA) I get the following error message:
Certificate not issued (Denied) Denied by Policy Module The request does not contain a certificate template extension or the CertificateTemplate request attribute. (The request contains no certificate template information. 0x80094801 (-214687 5391)) Certificate Request Processor: The request contains no certificate template information. 0x80094801 (-2146875391) Denied by Policy Module The request does not contain a certificate template extension or the CertificateTemplate request attribute.
How do I create a certificate signing request file so that a Microsoft CA will accept it and create a certificate from it. Thanks, Linh.

I'm writing a applecation about x509 to deal with certificate and certificate request.
I found that DER format certificate request create by sun's software with no extensions.
I think this cause your error.My be MS CA can't identify such a request!So it's difficult to solve this problem unless MS or Sun change their codes.
JStranger

Delete overlaping requests doesnt work with delta

Hello
I need to delete previous request delivered by delta DTP. Process type "Delete overlaping requests from cube" doesnt allow to select delta DTP.
Is it only for full load DTP?
Alex

Hi ,
Delete Overlapping request from cube works only for full loads.
Also if you have any such query regarding DTP functionality please reger this article
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10339304-7ce5-2c10-f692-fbcd25915c36
-Vikram

Feature request: modifier key to enable snap when working with lines

In order to connect lines and close shapes more quickly, I would like to use a modifier key to get a point to snap. Otherwise it's an extra step to use keyboard shortcut or clicking the toolbar icon (which doesn't always display). I would like to close the shape as quick as possible.
Modifier keys already exist for duplicating items, and keeping them vertical/horizontal, so why not add this using one of the unused keys? Thanks.

Adobe - Wishlist & Bug Report
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Cumulation of lower level item prices to higher level items

Hi,
We have a specific requirement that we use high-level materials that is not relevant for pricing and lower level items connected to higher-level item that are RA and billing relevant. How do we modify the pricing procedure to cumulate (roll-up) the lower level items to higher level item which is not price relevant but statistical value should be updated at this level for billing purpose.
We want to achieve this using/modifying only pricing procedure and not via user exit..
Request SAP experts to provide some inputs to this issue..
BR/Rajasekhar

Hi rajsekhar
But generally if you want to transfer the cost of the sub item to main item then you can check the box Cumulative cost in copy control VTFL . But your requirement is quite opposite .So you need to go to assign a New Reqt / Alt calc type to the cond type , telling that the header item cost which is not relevant for pricing has to be transferred to sub item .So you need to integrate with the ABAP'er to give inputs to him and giving our requirement also
Regards
Srinath

The security level is set to High

Windows 2008R2 terminal Server
Office 2013
Adobe Acrobat XI update 9
When trying to create a PDF from a word document (have not tried other files yet), Adobe hangs for about 2 mins and then gives the following message
The Security Level is set to High
Please run the application which created this document, in the "Security Warning" dialog select the check box "Always trust macros from this source" and enable macro's created by Adobe Systems inc
No 1. There is absolutely no need for an apostrophe in the second instance of the word macros
Have deployed the Adobe Acrobat Administrative template and enabled the following setting
'Automatically Trust Sites for Win OS Security Zones' (Elevates the trusted sites list in Internet Explorer to privileged locations so that they may bypass enhanced security restrictions. When enabled, the trust list is a union of IE's trust list and Acrobat's privileged locations list. GUI mapping: Edit > Preferences > Security (Enhanced) > Automatically trust sites for my Win OS security zones)
- not a fix
Have exported every digital signature from the pdf office dlls and imported to the computer certificate store - not a fix
Have disabled every office macro and security setting - not a fix
Does not matter if the file being converted is on a UNC path, mapped drive, or local drive
Have added all file locations containing office docs to trusted folders in Word and Adobe - not a fix
R-Click context menus for combining and conversion work fine however I understand that this uses the Adobe PDF Printer and not the office addons
Opening a file in Word and converting to a PDF using the Addon is fine as is printing to the PDF Printer
This issue only occurs from within the Adobe Acrobat Application 'Create file from PDF' and currently only seems to affect Office documents
I cannot see how to give Adobe any more trust

Solved
I was running Office in a 'RunVirtual' environment. This man explains it best
http://ppe.blogs.technet.com/b/gladiatormsft/archive/2014/02/05/app-v-5-on-run-virtual-rds -run-virtual-virtualizable-ext…
Essentially Office and Acrobat are installed Natively however all Office Apps are configured to run in a Virtual environment so that Office Addins which are true AppV applications can be linked into Office.
My 'Empty' 'RunVirtual Office package did not have 'Com Integration' enabled
Adobe Acrobat makes use of a Com Addin for Office, so Office was unable to expose that to Adobe Acrobat until the 'Empty' 'RunVirtual Office package was updated accordingly

I'm getting an error "Security level is set to High..."

When I’m trying to combine multiple Word documents into a single PDF I’m getting an error "Security level is set to High...".
I regularly did this at my previous office, and the process involved dragging the Word doc’s from an Explorer window into an Adobe Acrobat window, then selecting ‘combine’; Acrobat would automatically open Word for each file, print it to the file it was building, then close Word and move on to the next file.
It appears that some setting on my new laptop is now different, either for Word or for Acrobat, but as usual, the error message is next to useless to fix the problem. There is no error message opening in Word, as the dialogue box suggests, and I can’t find any “Security Warning” dialogue box in Word. Where is the setting I need to fix?.
I am using Windows 7 with Word 2013 and Acrobat XI Pro.
-Michael

Hey Michael,
You might need to check the security level within Internet Explorer and ensure that both Download Signed ActiveX Controls and Run ActiveX Controls And Plug-ins are set to Prompt.
For this:
Open Internet Explorer. Go to Tools> Internet Options and click the Security tab.
Click Default Level, or click Custom Level and do the following:
a. Find the section ActiveX Controls And Plug-ins.
b. Set Download Signed ActiveX Controls to Prompt.
c. Set Run ActiveX Controls And Plug-ins to Prompt
Now check again and let me know if it works fine now.
Regards,
Anubha

Battery Wear-Level overnight feels too High!

Hi,
Usually i rarely use battery (always put the battery out after charging it) except when i need to take my 4-months-old B480 laptop outside (which is rarely happened)
Yesterday i leave my battery with ac adapter plugged-in while downloading a large file from internet, i set start charging threshold at 75% and stop at 95% (as many people said it's better not to fully charge the battery), and on the next day i see my battery wear-level became 13% O.o while cycle count is only 5
I think it's too high for a one-night charging, my old laptop (non-Lenovo) didn't gets this high even when i leave it with ac adapter for days.
Is this wear-level normal for a one-night charging? (at-least for lenovo laptop that is)
Does warranty covers an abnormal battery wear-level?
PS: one of the reason i choose lenovo laptop is because it has customizable-battery charging threshold feature which many people said can be used to prolonged battery lifespan(minimizing wear-level by not fully-charging it and not discharging it too low) even when used with ac adapter, while not many other brands have this kind of feature.

hi AdamN,
A usual sign of an imminent battery failure is when it wears out the charge in an abnormal rate (battery goes down to less than 20% overnight after a full charge when unit is off or in sleep state). Sometimes heat can also be a factor to shorten the battery life as discussed in this article.
To further test the health of the battery, You can try Passmark's BatteryMon. If the battery is failing, you may contact Lenovo for a battery replacement. Support phone list here.
Hope this helps.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Rotate tool not working in cs6. It says "Could not complete your request because it only works with OpenGL enabled document windows." Its worked fine in the past....

Rotate tool not working in cs6. It says "Could not complete your request because it only works with OpenGL enabled document windows." Its worked fine in the past....
-CharlieH23

Copy and paste only this area, you may have to scroll down.
Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2494 MHz
Built-in memory: 6019 MB
Free memory: 3360 MB
Memory available to Photoshop: 5227 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
OpenCL Version: 1.2
OpenGL Version: 2.1
Video Rect Texture Size: 16384
OpenGL Memory: 2112 MB
Video Card Vendor: Intel
Video Card Renderer: Intel(R) HD Graphics 4000
Display: 1
Display Bounds: top=0, left=0, bottom=768, right=1366
Video Card Number: 1
Video Card: Intel(R) HD Graphics 4000
Driver Version: 10.18.10.3958
Driver Date: 20140930000000.000000-000
Video Card Driver: igdumdim64.dll,igd10iumd64.dll,igd10iumd64.dll,igdumdim32,igd10iumd32,igd10iumd32
Video Mode: 1366 x 768 x 4294967296 colors
Video Card Caption: Intel(R) HD Graphics 4000
Video Card Memory: 2112 MB

How to prevent the Canon 6D to climb to higher ISOs when it works in automatic mode?

How to prevent the canon from 6D climbing to higher ISOs when it works in automatic mode?
I was shooting at a basketball game at ground level and I left it in automatic mode because the moves were too fast, but when I passed to Lightroom, the photos were grainy, due to high ISO.

Under the settings menu (third menu over), select ISO settings, and then set the Auto ISO limits for max to whatever you consider the maximum acceptable ISO.

In the report level user wants two persons against each work center.

Hi Experts,
Please let me know the solution, I have provided scenario below.
check the query which the user is referring to report:
Example
Work center     Person
KNE33102     44003850
According to the user, the names for the Work centers should be as follows:
Work center          Person
KNE33102         44003850,
KNE33102        44003603
I have check the data in T-code-CR03, each work center getting two persons, as can be shown below.
Work center        Person
KNE33102           44003850,
KNE33102           44003603
In RSA3 it can be seen that both the records are being extracted
Work center     Start date     End date     Person
KNE33102     09.02.2009     31.12.2009     44003850
KNE33102     09.02.2009     31.12.2009     44003603
In BI , when checking in PSA, it can be seen that the data is also being loaded to BI (Two persons loaded against Work center-KNE33102)
Work center     Start date     End date     Person
KNE33102     09.02.2009     31.12.2009     44003850
KNE33102     09.02.2009     31.12.2009     44003603
But when loading to the Info Object, one person has deleted. Because of this, in the report level displaying one person.
Note:-Please let me know what is the procedure, in the report level user wants two persons against each work center.

Hi,
As you said in your post the data has mentioned up to 2009. can you try execute the query till to date .
Regards
sivaraju

I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries)

I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries).
Thank you for your help! - I did try looking for all available specs about Keynote on the Apple iTunes website, and found nothing that could help me. HELP!

1
Close all iWork applications
2
Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
3
empty the trash
4
shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
5
Reinstall Keynote by logging into the Mac App Store using download / install

How can an ADF Tree be configured to work with varying levels of heirarchy?

We have a need for a Locations tree that represents the Locations heirarchy for any one of our clients. Depending on the client the number of levels in a location heirarchy could range from 1 to 9.
I have created 9 different tree bindings and I can change the tree binding in the jsp page - the example below is for a client with 4 location levels.
<af:tree value="#{bindings.ScdLocs4View1.treeModel}" var="node"
binding="#{backing_locations.tree2}" id="tree2">
For a client with 5 location levels, I'd like to programatically change the value to
#{bindings.ScdLocs5View1.treeModel. How can I do this?
I was thinking I could use the setValue method on the tree control in my page's backing bean. But I have been unable to get a reference to the tree binding.
I don't see an appropriate method for finding a Tree Binding. There are methods for finding an Iterator Binding, an Executable Binding, or a Region Binding (whatever that is). But how do I "find" a reference to a Tree Binding?
I have also given consideration to using a single Tree Binding with 9 levels (or rules in the Tree Binding Editor) and finding a way to programatically "start" the rendering at a particular level (or rule) - in effect telling the ADF Tree control to ignore some number of rules and begin with the specified rule. But I haven't been able to figure out how to do this either.
Help would be greatly appreciated.

Bill,
A tree binding is a particular kind of control binding, so you can find it as a control binding and then cast it to the more specific interface to work with it.

DCFilterCallbacks of level 2.0 or higher requested when working with WF

Similar Messages

Maybe you are looking for