DCH Report not showing what Data collection Value at Particular Operation

Hello,
I need one help regarding the DCH that is Device History Report, I am doing data collection at particular operation but when I look at DCH I can see all the Operation to that SFC but I canu2019t drill down to look what data I had enter as a part of Data collection.
Regards
Suhas

Hello Suhas,
Please make sure that you have configured Device History tab in User Preferences Maintenance.
Regards,
Alex.

Similar Messages

  • Standard API to get Data collected value at perticular operation

    Hi Experts,
    My Scenario is that at POD screen, I am at Operation_4, which Standard API can I use to get the Data Collected value at Operation_1 in the same Routing? The API would be used in a Actvity hook at POST_START. Or is there any other way to accomplish it?
    Thanks in advance,
    Eswaraiah.

    Hello Eswar,
    use DataCollectionServiceInterface API 's findParametricByOperation() method

  • Purchase requisition report not showing any data R12.04

    when i run "Printed Requisitions Report". Report run without any information.
    EBS R12.04

    Please refer to Note: 472332.1 - R12: Printed Requisition Report Ends With "No Data Found"
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=472332.1

  • SharePoint 2010 Site Web Analytics - Top Pages report not showing complete data

    Hi,
    I have a custom page in a team site which takes list ID as an argument and shows the relevant data e.g.
    ../Dashboards/View%20Briefing.aspx?BriefingID=1078
    ../Dashboards/View%20Briefing.aspx?BriefingID=1079 etc
    When i look at the Top Pages report under Site Web Analytics all i can see is data for:
    /dashboards/view briefing.aspx
    I need stats for individual list items i.e. how many time BreifingID 1078 was viewed etc. Is it possible to achieve this using OOTB reports or can i write a custom report to achieve this? If yes then how...
    Any help would be appreciated.
    Regards,
    Kashif

    You’re dynamically filtering content on a single page with values on the query string. Your users are still only hitting one page (View%20Briefing.aspx). Analytics only sees that 'View%20Briefing.aspx' is being hit; it won’t record stats for what’s specified
    on the query string.
    I expect you could pull this data out of your IIS logs using log parser. Some links on this subject:
    http://www.toddklindt.com/blog/Lists/Posts/Post.aspx?ID=85
    http://blogs.technet.com/b/corybu/archive/2008/02/26/sharepoint-iis-traffic-analysis.aspx
    http://social.technet.microsoft.com/wiki/contents/articles/16072.sharepoint-2010-create-analytic-reports-using-logparser-and-powershell.aspx
    http://blogs.msdn.com/b/carlosag/archive/2010/03/25/analyze-your-iis-log-files-favorite-log-parser-queries.aspx
    http://logparserplus.com/Examples

  • Links in Reports Not Showing Correct Data

    Good Afternoon!
    I've recently found that the links in some reports are not working as they should.  Below is an example from a report I just tried:
    Example
    I ran the report "Count of all instances of specific software registered with Add or Remove Programs" and selected a specific Collection I had created.  The report ran as it should and displayed a list of all software titles and versions for all of
    the collection's workstations combined.
    One application has 5 different versions installed amongst the collection and I need a list of them.  Each of the 5 versions was listed and each had a link.  When clicking on the link, though,
    it showed a list of "all systems" workstations which had the application / version - not just the number of or machines from the collection the report was run on.  Long story short, the report displayed about
    11 machines, but clicking on the link showed a list of about 40.
    I don't know if this is by design, but it's really difficult to work with.  I am having to make individual queries for the data which takes much longer.  Is there a resolution to this?
    Thank You!
    Ben K.

    Yes, I know this is an old post, I’m trying to clean them up, Did you figure this out, if so how?
    Yes this is be design however you can modify the "Computers with specific software registered in Add Remove Programs" report and have it filter on both the SW title and collection.
    http://www.enhansoft.com/

  • Siebel BIP report not show correct data when current view=my programs view

    Dear All,
    I have report that contain field approval,
    which is when i login as 'SASKIA' as example then i want to print report budget request,
    this report contain field approval like :
    Employee Login
    HOKIONO     
    BAMBANG
    PONGKY
    SASKIA
    but when i print the report it just show:
    Employee Login
    SASKIA
    and it happened only if i print report in 'MY Programs' view,
    the report show ok in 'All Programs' view.
    and when checked in siebel tools, IO Program Container(that used in report), the link already set to all.
    Please help me on this.
    Best regards
    Cecilia

    try adding a user property to your integration object:
    User Property Name: "ViewMode"
    User Property Value: "All"
    see if it has any effect - for me it solved some issues with data not being displayed!
    Benny

  • Network Management Reports not showing any data on scom 2012 r2

    Hello,
    I have imported Windows Server operating system Management Packs and it  started monitoring the windows server system and network adapter state showing healthy state for all the adapter attached to  Virtual Windows Server 2012 Machine.
    but none of data showing on Network Management Reports ,all the other reports are working properly. If  Its need to enable some monitor which are disable by default, pl z list what are the monitors how to enable those monitors?
    May I first need to Deploy agent particularly on network adapter ?
    Regards
    RICHA KM

    Hi,
    I think you could start from here:
    Monitoring Networks by Using Operations Manager
    http://technet.microsoft.com/en-us/library/hh212935.aspx
    System Center Operations Manager 2012: Network Devices with Extended Monitoring Capability
    http://www.microsoft.com/en-us/download/details.aspx?id=26831
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Report Not showing complete data.

    Hi All,
    I am new to crystal Reports.
    I have two tables Location_details and Revenues.
    I created a crosstab report with rows being Region and Location and column is a MONTH.
    The Summary field is Total Revenues for a location for that particular month.
    When I am trying to run this cross tab report It doesnot give all the locations in the report.
    But when i See these in database it gives all the location (120 locations)
    some of them have no revenues in that particular month.
    but in cross tab am able to see only 45 locations.
    How can I solve this issue.
    Your guidance will be appreciated.
    Thanks
    Nani.

    how are you tables joined, equal joins?
    they should be left outer, if they are equal you will only get locations with revenue.
    a cross tab actually displays the values in one page you need to go to the right to see all your values, cross tabs can be very large and cumbersome and will never print correctly on one page.
    what are you trying to put together?
    revenue by location?
    i would create a reqular report
    create a group for location
    then sum the revenue on the location group

  • Firefighter - SoD Violations Report - not showing any data

    We have ECC6 and GRC 5.3 with latest patch. Our RAR is working well also. We recently installed firefighter. All reports are working fine except following two reports,
    1: SoD Violations Report
    2: Critical Transactions
    We want to use RAR critical table and SoD data, therefore In our configuration table we have following paramter set as:
    Critical Transaction Table from Compliance Calibrator (VRAT) = YES
    Could someone please direct in right direction how to get it fixed. Is there any SAP Note suggesting configuration setup etc.
    Thanks in Advance
    Masood Akhter

    There are a number of settings to be made in order to get this working. The note is helpful but effectively you need the following:
    In ECC
    TCP/IP RFC Dest created with a unique report name.
    This RFC mentioned in the /VIRSA/ZRTCNFG transaction
    In RAR
    The Report name entered into the RAR connector.
    The SAP gateway mentioned in the RAR Connectior.
    The RAR connector marked as outbound connection.
    The SAP Adapter activated.
    In SPM (ECC)
    Set the "Connector ID for Risk Analysis" parameter to the name of the RAR Connector in the SPM configuration table.
    You may also have to do a Java system Restart if you encounter error messages when activating the SAP adapter in RAR.
    Simon

  • BPMon alert reporting not showing any data for Trend Analysis

    Hi,
    I have setup BPMon and performed the initial setup for BW reporting. There are alerts being generated by the BPMon setup and the data has been transferred to the 0SM_BPM cube.
    But when I start the Trend Analysis report I dont get any Solution for selection to generate the trend analysis chart.
    I have followed all the steps mentioned in the setup guide. Please suggest any remedy.
    Regards,
    Vishal

    Hi ,
    If your query is on multiprovider , then makesure to check there are no restrictions/filters on cubes.
    Also inlcude any keyfigure from the cube,where other characteristics are being assigned from or where u r seeing data, in the query.
    If you dont want to see the Keyfigure, u can hide it using keyfigure display properties in the query designer.
    Hope this helps,
    Aparna Duvvuri

  • Report not showing data

    Hi,
    We have a report which is built on Multi Provider.
    This Multi Provider is using 2 global restricted KF's and we have some filter values also.
    The report is not displaying any values , while the Multi Provider has values for the same restrictions
    I tried to execute it in RSRT,but its not giving us any idea.
    Please help me on this.
    Thanks in advance!

    Hi,
    The query is having some restrictions in the filter area. And also there are 2 conditions in the query.
    I am checking the Multiprovider data with the tcode LISTCUBE. I am giving all the selections and the restrictions in the Multiprovider , some data is there in the multiprovider.
    But in report its not showing any data.
    Where shall I check, whetehr I need to check the MultiProvider assignment characterstics?

  • Metric shows real time value but does not show historical data

    I am using OEM 12c.I am facing an issue and I don't know where to look for problem.
    I had created one customized metric for percentage flash recovery area through metric extension.I deployed to it target databases.
    When I check it through Database --> All Metrics it shows me real time value for metric,Collection schedule,upload interval and last upload time.IT is all fine.
    When I check metric value history,
    For all the columns like Last Known Value,
    Collection Time stamp,
    Average Value,
    High Value,
    Low Value
    it shows no data.It even does not show anything in Metric Value History graph.
    Even the metric test in Metric Extension works fine.
    All the client agents are uploading the the data to OEM successfully.
    Any help,guide is appreciated.

    bit late but there are two options on metric creation "Alerting Only" or "Alerting and Historical Trending" - I assume you need the latter to show history so was this option used?

  • BI Projects Report Not showing data

    Hi
    I am a new to BI.I am trying to configure BI for Oracle Projects.So the problem here is couple of reports are not loading data on dashboard.
    The issue is with Most of report that use data from Organization table
    1.My BI is integrated with EBS.(I am wondering id HR security has anything to do with same)
    2.Is there any step that should taken care while configuration?
    3.Currently my log level is 3,But I am not able to see the query in Manage session.Show that I can get more information on specific table which is causing the query to return no data
    Thanks in advance.

    Hi,
    The query is having some restrictions in the filter area. And also there are 2 conditions in the query.
    I am checking the Multiprovider data with the tcode LISTCUBE. I am giving all the selections and the restrictions in the Multiprovider , some data is there in the multiprovider.
    But in report its not showing any data.
    Where shall I check, whetehr I need to check the MultiProvider assignment characterstics?

  • Bex report does not show loaded data at once

    Hi experts,
    Why Bex report does not show loaded data at once after loading is finished but after some time?
    Could be the reason of it:
    a) huge amount of data in infocube.
    b) there are no deleting/creating indexes before/after loading, because it takes too much time
    c) anothe reason?
    Thank you,
    Tigr_Z

    Hi Tigr,
    A and B both can be the reasons behind, but normally in case of B option the results on report output can be wrong like duplicates sort of showing you double figures.
    C - it can be resource issue, so please look into all and double check with basis if thats the case.
    Regards
    Sunny

  • What report can show Release & re-release value of SAP contract

    Hi Gurus
    What report can show Release & re-release value of SAP contract... Can you please suggest..
    Thanks in advance
    subbu

    Hi,
    We have standard report available to view the release /un-release in Purchasing document category (K-Contract-Sched.agreement,F-PO,A-RFQ) . In standard transactions ME80RN -General Evaluations, It will list out the report which is include your release document header like release group.code,strategy,status of release indicator (Y/N). For this expected output,you will need to choose the dynamic selection(shift+F4) with this you have to double click your expected requirement fields.
    I hope this will fulfills your requirement.
    Regards,
    Thiru

Maybe you are looking for