DCNM not managing all VDC's

New installation of Nexus gear as well as DCNM. Currently DCNM will manage the admin VDC on the 7718 but it will only show the other VDC's with the 'Device not managed' icon (red slash circle through the wrench). I'm using the same creds for each VDC and I am sure these creds can login to each VDC. I've been looking over the 'DCNM Fundamentals' document and I have read how to create a seed entry and discover devices but I do not see anything that talks about specifically managing each VDC. I've been clicking around all day and just don't know what I'm looking for.
Am I missing something simple? This seems way too hard.
--Brian

How to organize iMovie '08 folders etc.
From within iMovie '08 itself.
Do you keep all fresh raw footage in one folder? And all other whatevers in other folders? Or do you keep all of the folders relevant to one project in one folder?
Forget about folders. Use "Events" as bins (i.e. "folders" or "drawers") in which to store your clips and/or move them between if you must. Name and use them as you wish -- but use them rather and moving things as individual clips in physical folders at the "Finder" level outside of the iMovie '08 application -- i.e., let the application "manage" your files as it is supposed to do.

Similar Messages

In solution manager system not showing all the system in SLD

Dear Gurus,
During the installation of solution manger sysyem i selected as a Central SLD as solution manager
Later installed ECC 6.0 and EP systems selected SLD as solution manager system during the instllation.
If i login in to http://hostname:50000/sld (solution manger system) and the screen also not showing all the options also. some options missing in the tab. Wat I need to do to see all the options clearly.
It is not showing all the systems if i check in EP and ECC for SLDCHECK it is not givng any errror.
But if i login into solution manger not able to see all the system in SLD.
Regards

Thanks for reply
it is not showing all the systems

Service monitoring is not showing all the services when i create a service monitor under Management pack templates.

Hi All,
I am using SCOM 2007 R2 CU4 in my environment. I want to do a service monitoring on specific agents. When i try creating this service monitor which comes under the Management pack template when i select the service which i want to monitor it does not
show all the services in the drop down.
For example - I have Windows audio service which is present on the machine, But it is not showing in the service list.
So from the services stating from "W" i see only 5 in SCOM and in services.msc in the Agent i see more than 5.
Below is the screen shot.
Can any one please help.
Gautam.75801

Hi Yan Li,
So based on your above suggestion, If the services are already managed / monitored by a specific
management pack those services will not appear here in the Wizard while creating this type of a Management pack object alert right ?
If that is the case why does not the same reflect here in the operations console in the Services monitor
TAB ?
Gautam.75801

Extension manager does not see all of my adobe programs?? What can i do without reinstalling????

Hello i needed to install an extension for dreamweaver and for some reason extension manager does not see all my adobe programs. How can i fix that without reinstalling the programs?
Here are my Bridgetalk Diagnostics if it helps:
Result: BridgeTalk Diagnostics
Info:
Name = estoolkit-3.8
Status = PUMPING
Group = cs
Path = /Applications/Utilities/Adobe Utilities-CS6.localized/ExtendScript Toolkit CS6/ExtendScript Toolkit.app
Version = 2.0
Build = ES 4.2.12
Next serial number = 40
Logging: = OFF
Now = 12:58:04
Messages:
Message Version = 2.05
Authentication = ON
Digest = ON
Thread: estoolkit-3.8#thread
Avg. pump interval = 76ms
Last pump = 69ms ago
Ping: 7
ECHO_REQUEST: ECHO_RESPONSE
Timeout = undefined
Handler = undefined
STATUS: PUMPING
Timeout = undefined
Handler = undefined
MAIN: MAIN
Timeout = undefined
Handler = installed
LAUNCHED: LAUNCHED
Timeout = undefined
Handler = installed
DIAGNOSTICS: DIAGNOSTICS
Timeout = undefined
Handler = installed
INFO: INFO
Timeout = undefined
Handler = installed
SETUPTIME: thread=1ms, left=29ms
Timeout = undefined
Handler = undefined
Instances: 3
estoolkit-3.8#dbg:
msg[12:58:04]: 00000035
@BT>Version = 2.05
Target = estoolkit-3.8#dbg
Sender = estoolkit-3.8#dbg
Sender-ID = localhost:mac3334
Timeout = 12:58:05
Type = Ignore
Response-Request = Timeout
Headers = (no headers)
Timestamp = 12:58:04
Serial-Number = 35
Received = undefined
Result = undefined
Error = undefined
Body = (empty)
Incoming: 1
Outgoing: 0
Handler: 9
ExtendScript = for all messages
Error = for only msg #25
Error = for only msg #27
Error = for only msg #31
Result = for only msg #35
Error = for only msg #35
Timeout = for only msg #35
Result = for only msg #37
Error = for only msg #37
estoolkit-3.8#estk:
msg[12:58:04]: 00000037
@BT>Version = 2.05
Target = estoolkit-3.8#estk
Sender = estoolkit-3.8#dbg
Sender-ID = localhost:mac3334
Timeout = 13:08:04
Type = Debug
Response-Request = Result Error
Headers = (no headers)
Timestamp = 12:58:04
Serial-Number = 37
Received = undefined
Result = undefined
Error = undefined
Body: 107 bytes
Text = <get-properties engine="main" object="$.global" exclude="undefined,builtin,prototype" all="true" max="20"/>
Incoming: 1
Outgoing: 0
Handler: 1
ExtendScript = for all messages
estoolkit-3.8: (main)
Incoming: 0
Outgoing: 0
Handler: 1
ExtendScript = for all messages
Targets: 7
Connector = PCD
Installed: 0
Running: 0
fireworks-12.0:
Group = cs
Path = /Applications/Adobe Fireworks CS6/Adobe Fireworks CS6.app
Display Name = Adobe Fireworks CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = OFF
BundleID = com.adobe.Fireworks
Status = (not running)
ExeName = Adobe Fireworks CS6.app
aftereffects-11.0:
Group = cs
Path = /Applications/Adobe After Effects CS6/Adobe After Effects CS6.app
Display Name = Adobe After Effects CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = ON
BundleID = com.adobe.AfterEffects
Status = (not running)
ExeName = Adobe After Effects CS6.app
audition-5.0:
Group = cs
Path = /Applications/Adobe Audition CS6/Adobe Audition CS6.app
Display Name = Adobe Audition CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = ON
BundleID = com.adobe.Audition.5.0
Status = (not running)
ExeName = Adobe Audition CS6.app
bridge-5.064:
Group = cs
Path = /Applications/Adobe Bridge CS6/Adobe Bridge CS6.app
Display Name = Bridge CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = ON
BundleID = com.adobe.bridge5
Status = (not running)
ExeName = Adobe Bridge CS6.app
estoolkit-3.8: PUMPING
Group = cs
Path = /Applications/Utilities/Adobe Utilities-CS6.localized/ExtendScript Toolkit CS6/ExtendScript Toolkit.app
Display Name = ExtendScript Toolkit CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = ON
Status = PUMPING
Info:
Group = cs
Version = 2.0
Build = ES 4.2.12
Next serial number = 47
Logging: = OFF
Now = 12:58:04
Messages:
Message Version = 2.05
Authentication = ON
Digest = ON
Thread: estoolkit-3.8#thread
Avg. pump interval = 76ms
Last pump = 270ms ago
Ping: 7
ECHO_REQUEST: ECHO_RESPONSE
Timeout = undefined
Handler = undefined
STATUS: PUMPING
Timeout = undefined
Handler = undefined
MAIN: MAIN
Timeout = undefined
Handler = installed
LAUNCHED: LAUNCHED
Timeout = undefined
Handler = installed
DIAGNOSTICS: DIAGNOSTICS
Timeout = undefined
Handler = installed
INFO: INFO
Timeout = undefined
Handler = installed
SETUPTIME: thread=1ms, left=29ms
Timeout = undefined
Handler = undefined
ExeName = ExtendScript Toolkit.app
exman-6.0:
Group = cs
Path = /Applications/Adobe Extension Manager CS6/Adobe Extension Manager CS6.app
Display Name = Adobe Extension Manager CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = OFF
BundleID = com.adobe.exman
Status = (not running)
ExeName = Adobe Extension Manager CS6.app
switchboard-2.0:
Group = cs
Path = /Library/Application Support/Adobe/SwitchBoard/SwitchBoard.app
Display Name = SwitchBoard 2.0
MsgAuthentication = ON
MsgDigest = ON
ESTK = OFF
Status = (not running)
ExeName = SwitchBoard.app
Installed: 6
Running: 1
Groups: 119
cs3:
acrobat-8.0
aftereffects-8.0
soundbooth-1.0
bridge-2.0
contribute-4.5
devicecentral-1.0
dreamweaver-9.0
encore-3.0
estoolkit-2.0
fireworks-9.0
flash-9.0
illustrator-13.0
indesign-5.0
indesignserver-5.0
incopy-5.0
photoshop-10.0
premiere-3.0
stockphotos-1.5
audition-3.0
cs4:
acrobat-9.0
aftereffects-9.0
soundbooth-2.0
bridge-3.0
contribute-5.0
devicecentral-2.0
dreamweaver-10.0
encore-4.0
estoolkit-3.0
fireworks-10.0
flash-10.0
illustrator-14.0
indesign-6.0
indesignserver-6.0
incopy-6.0
photoshop-11.*
premierepro-4.0
audition-4.0
ame-1.0
exman-2.0
cs5:
acrobat-9.0
aftereffects-10.0
soundbooth-3.0
bridge-4.0
contribute-6.0
devicecentral-3.0
dreamweaver-11.0
encore-5.0
estoolkit-3.5
fireworks-11.0
flash-11.0
illustrator-15.0
indesign-7.0
indesignserver-7.0
incopy-7.0
photoshop-12.*
premierepro-5.0
audition-5.0
ame-2.0
exman-3.0
flashbuilder-4.0
flashcatalyst-1.0
ts1:
captivate3-en_us
captivate3-fr_fr
captivate3-it_it
captivate3-ja_jp
captivate3-es_es
captivate3-de_de
ts2:
captivate-4.0
el2:
captivate-5.0
as1:
acrobat-10.0
ts3:
robohelp-9.0
framemaker-10.0
cs55:
aftereffects-10.5
audition-4.0
bridge-4.1
contribute-6.1
devicecentral-3.5
dreamweaver-11.5
encore-5.1
estoolkit-3.6
fireworks-11.1
flash-11.5
illustrator-15.1
indesign-7.5
indesignserver-7.5
incopy-7.5
photoshop-55.*
premierepro-5.5
ame-2.5
exman-5.5
flashbuilder-4.5
flashcatalyst-1.5
switchboard-2.0
el25:
captivate-5.5
cs60:
aftereffects-11.0
audition-5.0
bridge-5.*
contribute-6.88
devicecentral-4.0
dreamweaver-12.0
encore-6.0
estoolkit-3.8
fireworks-12.0
flash-12.0
illustrator-16.*
indesign-8.0
indesignserver-8.0
incopy-8.0
photoshop-60.*
premierepro-6.0
ame-6.0
exman-6.0
flashbuilder-4.52
switchboard-2.0
prelude-1.0
speedgrade-6.0
el60:
captivate-60.*
ts4:
robohelp-10.0
framemaker-11.0

Same issue. Doesn't see Dreamweaver.

CS5.5 Project Manager not collecting all media

I am having a problem with the Project Manager in CS5.5.
Although I have used it succesfully in the past, on a current project I am trying to archive it is not performing correctly.
The issue is that the Project Manager is not collecting all the video clips when processing the project.
My project and its assets are contained in a folder and not scattered across my computer or multiple drive. The settings I am selecting are:
Selecting all sequences (11 in project)
Create trimmed project
Exclude unused clips
90 frame handles
Save in different folder on different drive
When I process, I am consistantly missing several video clips. They are a mix of avi and mov clips and they seem to be the same clips each time.
The clips are located with the other video files. They play just fine in the project but somehow they do not get included and trimmed when processed through the Project Manager.
Any idea or suggestions are approciated.

Any ideas? Anyone?

My SCCM Client does not show all the tabs in the Config manager control pannel

Hi All,
I have a issue Post pushing a installation on a client. It was installed successfully. But i do not get all the options in the control panel as per the below screenshot.
I reinstalled the client via push from the console during the re installation i got the below errors as per the below screenshot.
Can any one tell me why is this issue happening.
I get all the options in my SCCM DP / Site server control panel but not in the client.
I got the DP role re installed, As well as well as checked the DNS. Iam able to ping from my client machine to the Site server / DP via ip as well as FQDN.
Can any one please help?
Gautam.75801

Got the solution.
1. Reconfigure the boundary and boundary groups and rebooted the SCCM DP / Site server.
2. Turn firewall off in the client and uninstall the SCCM setup in the client and Rebooted the client and re install the client via push method from console
3. Turned off the UAC in the client machine.
Now i am able to get all the tabs s well as Console shows the server as a client.
Gautam.75801

HT201342 we only have one apple id for our household. i would like to use icloud to manage all our email accounts within our household. i currently use gmail. is there a way to continue to use gmail and have messages routed through icloud so no change i

i am new to icloud. i would like to manage all our household email accounts through icloud. i currently use gmail. is there a way to route all gmail messages through an icloud email so i do not have to change my email address? also how do i create multiple email accounts using the same apple id?
thanks all.
Mike

No, iCloud does not handle 3rd party mail, and Google can already sync to all your devices without any help.
iCloud accounts are individual, there is no 'Family' account. Open an account for each user, each will have an iCloud address.

I can not see all "Divisions" in BP Rel.--Partner Function Assignment

Hi,
When I edit "Partner Function Assignment" in BP reliationship such like BUR011("Employee Responsible"),
I can not see all "Divisions" in list which I can see in configuration via SPRO-->Customer Relationship Management->Master Data->Orgnizational Management->Division Setting->Define Divisions.
E.g., in configuration, I can see 7 records of divisions from "001" to "007", but in "Partner Function Assignment" of BP relationship, I can only see "002" to "004".
Do you know why? Thanks a lot!
Best regards,
Long

hi
that should not be happening,if they are visible in one client then should be there in another too
do one things try run this
hrbc1_atributes_buffer_update
it will refresh the buffers of your org structure and then you may be able to add this
also check the check box where it is mentioned that"object determination should be permitted"
remember it will run only for once after you run this the check box will be unchecked again
i guess it may solve your probs
also try to structure your org structure index
use t code
crmd_index_om
and withtin the object type give O
and execute
best regards
ashish

Premiere Pro, Creative Cloud & Adobe Application Manager all wont open.

One day it was fine, the next it's not. My Premiere Pro, Creative Cloud & Adobe Application Manager all wont open.
No error messages, it just doesn't open. I can't get through to talk to staff (because why should you be able to right? You only pay for the service..)
Could someone please shed some light on my situation?
My Lightroom and Photoshop are running fine as normal. I wish I could provide more information but it's really that simple - none of it will open.
Thank you!

At this point, I think I'd just download & run the Adobe CC Cleaner app, and use it to uninstall & clean up your PrPro & the Creative Cloud desktop app itself ... then download a fresh copy of the CC desktop app, install & sign into your account, then download & reinstall PrPro ...
Neil

I do not want all of the playlists in iTunes to be synced to my iPhone. With iCloud I do not seem to have a choice. How do I select only certain playlists for my iPone?

I have many songs and playlists in my iTunes account. I do not want all of them synced to my iPhone 5S, but that has happened via iCloud, and it has caused a storage problem on my phone. How do I select only certain playlists to be synced to my iPhone?

You need to start over with Music. On the iPhone Music screen uncheck sync music. Also, on the Summary screen uncheck "Manually manage music and videos", then sync and it should clear off your phone.
Next, choose the music you want to sync. If you want to fit more on check "Convert higher bit rate songs to 128 kbps AAC". This will reduce quality slightly, but it won't be noticable unless you are using $300 headphones.

IPod Classic not syncing all my songs from iTunes

Background: I've had my 160GB iPod classic for 5+ years and been using iTunes for close to ten years. I'm using Windows 7 on my PC and up until recently I've been updating both iTunes and iPod whenever updates are available. After the horrible experience of upgrading to iTunes 11 and trying for over a month to get used to working with all the annoying bugs and compromises in functionality that Apple stupidly introduced into what was once a really good piece of software, I decided a week ago to downgrade to version 10.7. I went thru all the necessary steps to make this downgrade work, eliminating the various error messages, etc, and it appears now that my earlier version of iTunes is fully functional.
But when I connected my iPod to sync new songs, I kept getting a message to scan and fix the disc on my iPod. I wasn't sure if I should do that so I ignored the prompt a few times. Then last night I decided to restore my iPod and start from scratch. The disc error message has gone away, but now it is not syncing all the songs it is supposed to.
Af far as I know there are no broken links and all the songs in my music library are located within iTunes, so that is not the issue. There may be some songs with the same title and artist but that appear on different albums, so those should not cause a problem. At this point I have too many songs to fit on my iPod so I have selected to sync only checked songs, and I have unchecked over 1000 songs in iTunes, so that when I connect the iPod, it doesn't tell me that there is not enough free space to sync the iPod, it just syncs the checked songs.
Before restoring my iPod, I had 14161 songs in iTunes, with 1105 of those songs unchecked so as not to sync them in the iPod. I did the math and that left 13056 songs that are checked, and that was how many songs showed up in the iPod after syncing it, with about 1GB of free space left on the iPod.
Now, after restoring my iPod, I get only 13009 songs showing up in the iPod, meaning 47 songs are missing (with exactly 1.4GB free space).
How can I troubleshoot this to find out what songs are missing and why, and then fix it? Is there an easy way to approach this daunting task? I am really fussy about my music library and am not the kind of casual user who just loads a bunch of stuff on my iPod and doesn't care if there are duplicates, broken links, missing songs. I manage my own library very assiduously each time I import new music and make sure it is tagged and filed correctly according to my own system. I want to fix this issue.
Could it be a problem with me using a newer version of the iPod updates with an older version of iTunes? And is there a way I can correct that, possibly downgrade the iPod software version I have now? Would it be worth the trouble to try restoring the iPod again, and if so, what precautions do I take to prevent the same thing happening again, where not all my songs get synced to the iPod.
Thanks to anyone who can offer some helpful advice...

Check through this.
http://support.apple.com/kb/TS1420

Lightroom 6 / CC2015 - Facial Recognition Terribly Slow, not using all of CPU or GPU, still keeps going when paused.

This is actually a couple of issue but wondering if others are experiencing it and worked through it.
I am using a Dual Xeon CPU 3.2 ghz Mac Pro, Catalog on SSD, Images files on Mirrored Pair, Dedicated GPU (max I can install in my version of Mac Pro) and hardware acceleration enabled in Lightroom.
I watched the Lightroom 6 Facial Recognition tutorial which leaves out a lot of the bulk editing and says basically let it loose on your whole catalog.. NOT recommended.
I started out with a couple small portrait galleries that identified a couple hundred total people to seed facial recognition so it didn't suggest everyone is the first person I confirmed (which it will do otherwise). I have also optimized my catalog multiple times.
I have encountered the following serious performance issues and bugs with Facial Recognition.:
Lightroom Facial Recognition goes to a ridiculous crawl after about 2000 images to be confirmed. (i.e. 2000-2300 in a couple hours, 800-1200 in the next 12 hours)
Lightroom becomes largely unresponsive after having a fair number of images to be confirmed, even after pausing Address and Facial Recognition. So even selecting 4 rows of images can take 5 minutes with several long pauses.
Once I select and click confirm it takes up to 2 minutes to update the "to be confirmed" list again.
When I click on an individual at the top of the page, pause facial recognition and address lookup it still continues to "Look for similar faces" [BUG!!!!!!!!] even though all I want to do is just confirm some individuals more quickly in bulk with the images already identified.. not continue to look for more as a work around for the painfully slow responsiveness of the module.
The odd part is that with all of the performance issues Lightroom will not use more than 20-30% of my two Xeon CPUs, barely touches my GPU (<10% CPU, 30% memory), my and no more than 35% of my memory. Computer Temps are also barely above startup temperatures and 15-25 degrees cooler than when I run other applications which will consume my entire CPU and memory if I let it. I have explored Lightroom's settings but seen nothing further I can configure to speed it all up. I have also attempted the operation on images on the SSD, my drobo (known to be slow), an independent fast disk I have, and a pair of raided disks and have the same issues.
I will also note that all of my other applications seem to continue to operate just fine.. the slowness seems to be contained to the Lightroom application itself.
Lightroom version: 6.0 [1014445]
Operating system: Mac OS 10 Version: 10.10 [3]
Application architecture: x64
Logical processor count: 8
Processor speed: 3.2 GHz
Built-in memory: 18,432.0 MB
Real memory available to Lightroom: 18,432.0 MB
Real memory used by Lightroom: 5,537.5 MB (30.0%)
Virtual memory used by Lightroom: 32,240.6 MB
Memory cache size: 4,342.0 MB
Maximum thread count used by Camera Raw: 8
Camera Raw SIMD optimization: SSE2
Displays: 1) 2048x1152
Graphics Processor Info:
NVIDIA GeForce GTX 285 OpenGL Engine
Check OpenGL support: Passed
Vendor: NVIDIA Corporation
Version: 3.3 NVIDIA-10.0.31 310.90.10.05b12
Renderer: NVIDIA GeForce GTX 285 OpenGL Engine
LanguageVersion: 3.30
Application folder: /Applications/Adobe Lightroom
Library Path: /Users/DryClean/Documents/Lightroom_Catalog/MyCat_LR6.lrcat
Settings Folder: /Users/DryClean/Library/Application Support/Adobe/Lightroom
Anyone have any suggestions?

A big problem continues to be that once you wait for it to index all your faces you find it missed over half of them. There are many cases where it missed the subject of the photo but managed to find a tiny waiter off in the shadows. I don't know how this will ever get fixed; it seems it'll require an update that lets you rerun the indexing a few times, maybe with different levels of granularity. I doubt that's coming.
It stands to reason that a system that hands you thousands of false positives for every face can't recognize if something is or isn't a face in over half the cases. Faces in profile or tilted down, especially with the eyes looking down, are bypassed completely. I have directories with a thousand people shots in them, many with multiple people, and instead of LR6 returning an index of 1.5k or so, it gives me 385. I'm not sure how valuable the search advantages will be in this case; I can see it not returning some favorite shots of people.
Anyway, for anyone looking to get past the spinning wheels, work on one directory at a time. Then once a directory is done, keep it selected so you have the same thumbnails of identified faces in the confirmed area, and control-select the next directory. You won't have to reseed the confirmed faces area this way and things move much faster when you're not working with the entire library. It also helps to click each person in the confirmed faces and work in that view sometimes. It'll return faces of family members of that person and you can rename those. You can watch it focus its top results as you confirm but, annoyingly, it doesn't narrow the total suggestions but actually expands them the more faces you confirm and the fewer correct positives remain. (This seems opposite to how it should work. It should give you fewer faces the more you confirm as it gets a better idea what the person looks like and has fewer shots left unconfirmed of that person.) Yet, even with the expanded results, faces will still escape it and pop up in other people's results as false positives.
Bottom line: It's only a little better than manual tagging, and not as thorough because of the poor hit rate of the initial indexing. But it works better if you stick to isolated directories and occasionally individual people. At least that way you don't have to wait for it to re-sort tens of thousands of results with every click.

Ical not storing all data & cant initialize lists

okay so im trying to store all ical data in seperate lists for hours months years and the actual event ect....it worked fine for a while but now its not storing all the events....and then when it did it would carry over from one run to another. I figured out that was probably because they were properties but when i make the lists global i get a "this variable is not initialized" problem. and even if i somehow managed to fix that its still not reading in all the data. ive been at this for 2 hours and cant see the problem. please help:
variable defs:
(*System Variables*)
global running_processes
global _weekday
global _date
global _month
global _year
global _hours
global _minutes
global _seconds
global time_ofday
(*iCal Variables*)
global iCal_Open
global iCal_Run
global iCal_Calendars
global iCal_Events
global icaleventsstore
global icaleventslast
global iCalEvents_StartMonth
global iCalEvents_StartDate
global iCalEvents_Startyear
global iCalEvents_Starthours
global iCalEvents_StartMinutes
global iCalEvents_EndMonth
global iCalEvents_EndDate
global iCalEvents_Endyear
global iCalEvents_Endhours
global iCalEvents_EndMinutes
global iCalEventsStart
global iCalEventsEnd
code to split up dates and date:
on Ref_Events()
proc()
if running_processes contains "iCal" then
(*if iCal is open do the code as normal*)
set iCal_Run to 1
set iCal_Open to 1
tell application "iCal"
set iCalEventsStart to the start date of every event in every calendar
set iCalEventsEnd to the end date of every event in every calendar
set iCal_Events to the summary of every event in every calendar
set x to 1 --holds calendar to be used
set y to 1 --holds event to be used
repeat while x is less than or equal to the number of items in iCal_Events
repeat while y is less than or equal to the number of items in item x of iCal_Events
get item y in item x in iCalEventsStart as string
set temp_date to the result
--start dates
set iCalEvents_StartMonth to iCalEvents_StartMonth & the second word of temp_date
set iCalEvents_StartDate to iCalEvents_StartDate & the third word of temp_date
set iCalEvents_Startyear to iCalEvents_Startyear & the fourth word of temp_date
set iCalEvents_Starthours to iCalEvents_Starthours & the fifth word of temp_date
set iCalEvents_StartMinutes to iCalEvents_StartMinutes & the sixth word of temp_date
--end dates
get item y in item x in iCalEventsEnd as string
set temp_date to the result
set iCalEvents_EndMonth to iCalEvents_EndMonth & the second word of temp_date
set iCalEvents_EndDate to iCalEvents_EndDate & the third word of temp_date
set iCalEvents_Endyear to iCalEvents_Endyear & the fourth word of temp_date
set iCalEvents_Endhours to iCalEvents_Endhours & the fifth word of temp_date
set iCalEvents_EndMinutes to iCalEvents_EndMinutes & the sixth word of temp_date
--event description
get item y in item x in iCal_Events as string
set temp_event to the result as string
set icaleventsstore to icaleventsstore & temp_event
set y to y + 1
end repeat
set x to x + 1
end repeat
end tell
else
(*if iCal is not open do the code then close it*)
if iCal_Run is 0 then
set iCal_Run to 1
tell application "iCal"
set iCalEventsStart to the start date of every event in every calendar
set iCalEventsEnd to the end date of every event in every calendar
set x to 1 --holds calendar to be used
set y to 1 --holds event to be used
repeat while x is less than or equal to the number of items in iCalEventsStart
repeat while y is less than or equal to the number of items in item x of iCalEventsStart
get item y in item x in iCalEventsStart as string
set temp_date to the result
--start dates
set iCalEvents_StartMonth to iCalEvents_StartMonth & the second word of temp_date
set iCalEvents_StartDate to iCalEvents_StartDate & the third word of temp_date
set iCalEvents_Startyear to iCalEvents_Startyear & the fourth word of temp_date
set iCalEvents_Starthours to iCalEvents_Starthours & the fifth word of temp_date
set iCalEvents_StartMinutes to iCalEvents_StartMinutes & the sixth word of temp_date
--end dates
get item y in item x in iCalEventsEnd as string
set temp_date to the result
set iCalEvents_EndMonth to iCalEvents_EndMonth & the second word of temp_date
set iCalEvents_EndDate to iCalEvents_EndDate & the third word of temp_date
set iCalEvents_Endyear to iCalEvents_Endyear & the fourth word of temp_date
set iCalEvents_Endhours to iCalEvents_Endhours & the fifth word of temp_date
set iCalEvents_EndMinutes to iCalEvents_EndMinutes & the sixth word of temp_date
--event description
get item y in item x in iCal_Events as string
set temp_event to the result as string
set icaleventsstore to icaleventsstore & temp_event
set y to y + 1
end repeat
set x to x + 1
end repeat
end tell
quit application "iCal"
end if
end if
if icaleventsstore is not icaleventslast then
say "new events stored in I Cal. Would you Like to View a List of all events?"
display dialog "View List of Events?" buttons {"Yes", "No"} default button 2
if the button returned of the result is "Yes" then
choose from list icaleventsstore with prompt "All the Current Events"
else
-- action for 2nd button goes here
end if
set icaleventslast to icaleventsstore
end if
end Ref_Events

You need to be careful when using conditional statements to set global variables (the global declaration does not set any values). I can't tell from the just the one handler you posted, but an example would be the iCal_Run variable - unless it is declared somewhere else, it won't have a value if there isn't an iCal process.

List view not showing all podcasts

Guys, I have the annoying problem that podcast management by itunes and the podcast app are F'ed up.
Not too lobg ago I experienced my ipad greying out most podcasts that were downloaded and on my ipad, for no reason at all. it took me 2 days fiddling with settings and ended up having to set every sync to "on" and set donwloading to "all" and "keep all podcasts"
Now I'm experiencing the problem that the "list" view in podcast app, is not showing all podcasts, but the "thumbnail" view is (as far as I can tell...). Why is this and how can I fix it to make sure both views show everything?
I'm running iOS 7.0.6 and iTunes 11.1.5

Hey there sporry,
It sounds like your Podcasts app is not showing your library correctly in the List view but Thumbnail looks ok. I recommend the troubleshooting in the article named:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/ts1702
Restart the app
Close the app and open it again.
Restart your device
Turn the device off and on.
Update your device software and your apps
Update your device to the latest version of iOS.
Update your apps:
Open the App Store and tap Updates.
If updates are available, tap Update All.
If asked, enter your Apple ID password. The updates will download and install.
You might need a Wi-Fi connection to update some apps.
Install another app from the App Store
If your installed app won't open, download and install a free app that isn't on your iOS device. This should reset your Apple ID authorization.
Remember to use the same Apple ID that you used to download the app that you're having issues with.
Reinstall the app
Remove the app from your device and reinstall it. Remember that deleting an app also deletes its data.
Delete the app.
Press the Home button.
Go to the App Store and download the app again.
Wait for the app to download, then open it from the Home screen.
If the download stops, you can resume it.
Thank you for using Apple Support Communities.
Cheers,
Sterling

Looking for an app that will manage all my business contacts (5,000 ) by company and then by name

I'm looking for an app that will manage all my business contacts (5,000+). Want the app to categorize by company and then by name, kind of like an organization chart
Ex. Apple, Inc.
-John
-Sam
-Nicole
I just downloaded "FastContact" for free but its too slow while searching. After more research I saw "ABContacts" but don't want to pay $5 for something I may not be looking for.
Any suggestions?

The only thing available to you is the restrictiions section in settings. Due to sandboxing, apps cannot interoperate with other apps except for sending data files from one app to another if allowed. There is no app that will help you.
Settings>General>Restrictions.

DCNM not managing all VDC's

Similar Messages

Maybe you are looking for