DCOM Error, found solut

Well each time I was booting up I was getting the same DCOM error most people on here were getting. What I ended up doing was going to Start - Run - msconfig - startup tab - then I unchecked SBdrvDet. I restarted and no error. So here I am a couple days later saying I have no problems and its still working with no errors.
So what im asking is, is there anything bad about doing thing? I havent seen any problems.

That should be ok, all you have done is prevented that program from loading when you boot, it is still available to be called by any process if required. If you have lost no functionality consider yourself smart.

Similar Messages

Yosemite - multiple errors - found FileVault error - Solution found

My early 2013 13" MBP Retina with a 700GB SSD suddenly started having multiple minor errors immediately after upgrading to OS X Yosemite 10.10.1, and accepting default FileVault encryption for hard drive. 700GB drive has 600GB of data o it with 100GB free.
1) Mail started freezing and hat to be Force Quit.
2) Mail would show no internet connection and would re-enage after being Force Quit.
3) Iphone 5 would not connect or sync
4) All photos remaining on iphone 5 were scattered and disorganized throughout multiple files
5) Screensaver continuously reverted to National Geographic. Had to be reset every day to Aperture photo file.
6) Internet wiFi connection dropped off continuously every 5 minutes for no apparent reason.
7) Machine "crashed' on a daily basis for no apparent reason
I checked the forums and completed the following actions:
a) completed disk utility verifying and repairing permissions and disks - no fix (errors found requiring restart command R and unlock disk with "File" at top of page.
b) completed PRAM reset with restart command, option, PR - no fix
c) completed SMC reset , shift control, option power - nil fix
d) completed memory test with restart command D (short 5 mins) (long 40 mins) memory ok - nil fix
e) completed re-install off of the internet with restart command R 9 (four hours) - nil fix
f) checked System Preferences, Security and Privacy, FileVault and found it stuck at encryption at 20% of bar with a message to connect AC power.
    Ac power was already connected. Changed power supply - no change. Forums said PRAM reset with immediate Command R, unlock drive with upper tool bar
    "File" and "Unlock" command. Restart. FileVault encryption resumed showing 30 hours remaining. Froze again after 5 minutes. Repeated steps in f); FileVault
    resumed. Ran for one hour, then stopped again. Repeated steps in f); File Vault resumed and ran for 12 hours; with time estimates changing from 3 days to 10
     minutes and back to 3 days and back to 2 hours; until File Vault showed "encryption complete". As a precaution, completed PRAM reset, Command R disk utility,
     unlock HD, verify permissions, verify disk, restart; "Turn Off FileVault". Four hours to decrypt computer. Restart, reset PRAM, reset SMC.
Requesting a proper knowledge base fix?
Results to follow.
My time is valuable.
Thank you for burning up 3 days of my life.
I hope this post saves someone else a lot of time, stress, and effort.
Best regards,

You must start by posting in the appropriate Windows 7 found @
http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w7itpro
This is a Windows Vista for discussions about Windows Vista, not Windows 7.
Windows 7 discussions are found @
http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w7itpro
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

G3 imac can't update past 10.4.6 "errors found during update"

I'm issues with a slot-loading g3 imac updating past 10.4.6 (the version i installed from the dvd). the boot rom number is 4.9.f1. I tried to format after the first incident to no avail. It runs pretty good as is but I need to get Ilife 08 on it(which claims to need 10.4.10 i believe). The first go at this I ran software update, it updated everything but the 10.4.11 combined, which rendered my Itunes unusable because it needs 10.4.9 or later. I even went as far as just downloading the 10.4.7 combined update with the same outcome. Instalation on the os x update runs normal and the just stops, saying there were errors found try updating again.
Please help!!!
Thanks in advance,
Dan

A G3 won't see more than 128 GB of a drive. You can put in a larger drive but the computer won't see anything beyond the first 128GB, not even if you partition. I know with G4s you can put in ATA PCI cards which will allow you to use bigger drives, and there's a utility called [SpeedTools|http://www.speedtools2.com> which is a software solution (read carefully before using as there are drawbacks vs. hardware).
A hard drive is one place where I am hesitant about buying used, especially if it is one that is the same vintage as your computer with who knows how many hours on it. I am saying this because I don't think if you buy new that you will find anything less than 7200, 8MB, 160 GB, etc. I also see people asking $30 for used 120GB drives, and you can get a new 160GB drive for not much more if you hunt around and fill out your rebate coupons.
You can get a bigger drive, use the first 128 GB with this computer, then when you get a new computer move the drive into it and use the whole thing (assuming you get a computer that supports big drives as just about any computer made in the past 4 years will do).
Personally I like Seagate drives, but you'll get all kinds of responses on this.
Since this is moving more into the hardware realm you might consider reposting the issue in the imac and/or G3 forum.
Oh, one more thing, I wouldn't necessarily kiss the drive goodbye. If you have given up on directory repair why not try reformatting it with the erase option (to do a scan for bad blocks) and see if it still has some life left in it? I am still running two 120GB drives in this computer, at least one of which is 5 years old.

DCOM errors ID: 10010

Hello,
I was checking on my "event viewer" and I found tons of errors DCOM related, all of them have as the event id: 10010.
Checking for details is not only related to one application only but several:
The server App.AppX54xz6wnkhmw763c2y8tb018n7d71dtx7.wwa did not register with DCOM within the required timeout.
The server AppexNews.AppXm7hnj7tzqqzrmb6spmf0x4fb91edcc71.mca did not register with DCOM within the required timeout.
The server Microsoft.WindowsLive.Mail.AppXj3e9v0xw9sf8t58nqr15tqqb2yq4zsfg.mca did not register with DCOM within the required timeout.
The server AppexSports.AppXzwt95zf827jx8vevssdmkdacbwrgjgeb.mca did not register with DCOM within the required timeout.
... and much, much more different apps getting the same error.
Runing the Windows 8.1 pro x64

Hello, none of the errors have something to do with the display of ASP pages, it's related to specific applications like:
The server Microsoft.WindowsLive.Mail.AppXj3e9v0xw9sf8t58nqr15tqqb2yq4zsfg.mca did not register with DCOM within the required timeout.
The server AppexSports.AppXzwt95zf827jx8vevssdmkdacbwrgjgeb.mca did not register with DCOM within the required timeout.
The server AppexNews.AppXm7hnj7tzqqzrmb6spmf0x4fb91edcc71.mca did not register with DCOM within the required timeout.
The server App.AppX54xz6wnkhmw763c2y8tb018n7d71dtx7.wwa did not register with DCOM within the required timeout.
... and many many others. A thing that occurs every few minutes is the explorer restarts and when I check the event log, the DCOM errors are only ones that appear at that specific time.

"Errors found during the burning process"

Hello,
I created an iDVD project that includes:
1. 108-minute movie
2. 6-minute movie
3. 3-minute movie
4. 12-minute slide show (3 four-minute slide shows)
The project worked fine in the iDVD Preview. I then attempted to burn the DVD right from iDVD, and after 8 hours of encoding, I got the "Errors found during the burning process" message.
I've read so many posts here with a hundred different possible solutions, but what is the best place to start to try to determine what the errors are and how to fix them?
Following one suggestion, I am now creating a Disk Image first, but if errors still exist with a Disk Image, what do I do then?
I'm working on a Powerbook G4 with the iLife upgrade. Thanks for any advice.
Larry

Larry,
Here's my philosophy on iDVD troubleshooting, largley based upon my experience here at this forum, with heavy doeses of input from Ken Tidwell, Len Goff, Old Toad, F Shippey, with more recent input from SDIllini, Hui Cheng, and Beverly M.......
#0 - always use "Save as Disk Image" instead of burning when troubleshooting iDVD
#1 Try the easy usual suspect fixes first! After all if these don't work you can always try the hard fixes!
Check the list on this download:
http://dvd.kentidwell.com/iDVDUOFAQ2005.pdf
But here are easy solutions IMHO:
Get free space on the startup drive -20GB recommended
Delete the iDVD plist file com.apple.iDVD.plist
Repair Disk Permissions
Clear Cache Files (CacheOutX, TigerCacheCleaner, Onyx)
Do you have 12 bit audio - check your camcorder.......if not 16 bit you will have problems
Fix Chapter Markers-don't put one at the beginning in iMovie (iDVD will do it for you)
Chapter Markers - don't put one at the end.
Chapter Markers - don't put one within 2 secs of a transition
Delete other corrupt preference files (try using Preferential Treatment)
#2 When the easy fixes don't work, you need to divide and conquer. The suspects are your a) your project media, b)your hardware, c)your system/user preferences, d)iDVD.
A good test for a&d is to build a simple test project with other photos/movies/themes/audio and see if you can "save as disk image" the test project. The iDVD4 tutorial project is great if you've ever had iDVD4 installed on your machine. If this works it suggests that iDVD is working OK, and that something in your project is causing the hiccup.
The most common problems in projects are CMs, audio and transitions. One way that sometimes clears them up is to export to full quality DV (or to tape!) and re-import into iDVD. In slideshows, funny JPEGs can bring iDVD down. The only method here is to try different groups to find the bad actor.
OK let's assume that you can't burn (I mean "Save as Disk Image") the test project or the tutorial. This suggest that your hardware/system/iDVD is having problems and your project is probably fine. Then what?
c) Hardware: if you can make a disk image but can't burn it, or it plays badly, then try creating a data DVD - if you can't do that I'd suspect your DVD drive. Try different brands of DVD-R (and I'd stick to -R, not +R nor +RW), I like Verbatim. Next on the suspect list is RAM. iDVD is the best test for RAM known to mackind. Try pulling non-Apple supplied modules and try again.
OK, let's assume you can make data DVDs, but you can't make a good disk image, and you've tried pulling all non-Apple RAM. What next?
Try creating a new user. New users have more limited sets of fonts and all new preference files and caches, not only for iDVD but for everything, and few (if any) third party plug-ins installed.
Finally try reinstalling iDVD.......
If you've done all this, a new system install might be in order, but come here first for advice from others before going that far!
john b

Error during solution manager 3.2 installation.

Hi !
I am getting the error in solution manager 3.2 installation . I am doing installation using system copy / backup restore method .
Getting ther following error -
"CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message: SP2-0310: unable to open file
"CONTROL.SQL"ORA-01012: not logged onORACLE instance started."
Kindly suggest the solution.
Regards-
sanjay

hi Markus!
The ora_sql_results.log file shows the following-
"2007-06-07, 18:32:21 SAPINST ORACLE start logging for
connect / as sysdba ;
CONNECT / AS SYSDBA
SHUTDOWN ABORT
@CONTROL.SQL
SHUTDOWN IMMEDIATE
STARTUP MOUNT
ALTER DATABASE ARCHIVELOG;
ALTER DATABASE OPEN;
EXIT
exit;
Output of SQL executing program:
SQL*Plus: Release 9.2.0.6.0 - Production on Thu Jun 7 18:32:21 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected.
Connected.
ORACLE instance shut down.
SP2-0310: unable to open file "CONTROL.SQL"
ORA-01012: not logged on
ORACLE instance started.
Total System Global Area 546906764 bytes
Fixed Size               455308 bytes
Variable Size            293601280 bytes
Database Buffers       251658240 bytes
Redo Buffers              1191936 bytes
ORA-00205: error in identifying controlfile, check alert log for more info
ALTER DATABASE ARCHIVELOG
ERROR at line 1:
ORA-01507: database not mounted
ALTER DATABASE OPEN
ERROR at line 1:
ORA-01507: database not mounted
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.6.0 - Production
SAPINST: End of output of SQL executing program E:\oracle\SMP\920/bin/sqlplus.
SAPINST found errors.
SAPINST The current process environment may be found in sapinst_ora_environment.log.
2007-06-07, 18:32:28 SAPINST ORACLE stop logging"
What to follow... pls guide
Regards-
sanjay

U410 SSD Error- Found uncorrectable data error LBA

I have lenovo ideapad U410. Few weeks back it felt down from table. Since then it was running slow. I formatted my laptop twice. But after formatting whenever I tried to install other software it was slowing down again.
I have checked with lenovo service center. They run some error checking software and they got this error
Error Code : ID08E-VMI
Error : Found uncorrectable data error . LBA
Error: Failure accessing sector LBA
For this error they have suggested me replace SSD of laptop which costs very high.
Kindly suggest any other solution.
Regards,
Mangesh Gurav

I have lenovo ideapad U410. Few weeks back it felt down from table. Since then it was running slow. I formatted my laptop twice. But after formatting whenever I tried to install other software it was slowing down again.
I have checked with lenovo service center. They run some error checking software and they got this error
Error Code : ID08E-VMI
Error : Found uncorrectable data error . LBA
Error: Failure accessing sector LBA
For this error they have suggested me replace SSD of laptop which costs very high.
Kindly suggest any other solution.
Regards,
Mangesh Gurav

DCOM error - 10010 - Server 2008 R2 Standard

My server is generating a DCOM error with GUID : 995C996E-D918-4A8C-A302-45719A6F4EA7
I did some research and found that this should be due to Auto play being enabled, I disabled it and restarted the server but the DCOM event is still happening.
Another DCOM event is also generated by GUID B286F068-5B17-4AE8-989B-8F9A199C47BA which refer to an HP printer DLL, no one is having any issue with the printer so wondering why it is logging that event.
Any idea ?
Thanks

Hi,
Regarding to Event ID: 10010 Source: DCOM, please refer to the following thread. It provided the possible causes
of DCOM Event ID 10010.
DistributedCOM Error ID 10010
http://social.technet.microsoft.com/Forums/windowsserver/en-US/77b1db1d-f186-4515-8f7d-2241942eb9b7/distributedcom-error-id-10010?forum=winservergen
Based on current situation of this problem, please use
sfc /scanfile command to scans integrity of this specified DLL file. And then check the printer and make sure that install exactly the right drivers. Meanwhile, please find if can update
the printer driver.
By the way, you can use
regsvr32 <filename> command to re-register the DLL file. Then please monitor if the Event ID 10010 still persists.
Hope this helps.
Best regards,
Justin Gu

Arithmetical errors or conversion errors found in routine ROUTINE_0001

Hi All,
Can you please let me know the solution for the below error which i found during loading Datasource
2LIS_11_VAKON for the ODS Order: Condition Data(0SD_O05) and Cube order : condition data(0sd_c15)
under :
Update rules ( 3323 -> 3323 ) : Errors occurred in
Data records for package 1 selected in PSA - 1 error(s)
Record 1 :Arithmetical errors or conversion errors found in routine ROUTINE_0001 record 1
Please provide solution for the above error?
Regards
Surya.
Edited by: sssurya on Sep 11, 2009 9:13 AM

Hi Surya,
Sorry for the late reply.
In your requirement there might be an condition when Billing Qty may come 0.In such a cases it becomes infinate value.
In Formula put an condition like.
IF( IS_INITIAL( Billing Qty ),0, Condition value / Billing Qty ).
If its routine.
If Billing Qty <> 0.
Condition Price = Condition value/Billing Qty.
endif.
Regards,
shivu.
Edited by: Shivu Kumar on Sep 16, 2009 9:22 AM

Arithmetical errors or conversion errors found in routine ROUTINE_0001recor

hi,
I am loading data from data source 2LIS_13_VDKON (Condition values) but get an error message from the PSA:
"Arithmetical errors or conversion errors found in routine ROUTINE_0001 record 98 RSAU 507"
I see nothing wrong in the mentioned record in the PSA. What is wrong? My load gets red...
I write a formula in update rules in this passion
IF "(Billing Quantity SU 0, KNVAL / INV_QTY SU, 0)"
But the thing is the system says it is correct but in complete.
I put . pulstop but it shows same error please it is high priority please give me replay.
Regards
Lakshmi

Hi hema,
Just check the record no. 98 in the PSA for the applicable formula
Just try to debug the update rules fix the break-points in the routine and try to analyze the error.........
Debug update rules:
http://www.sd-solutions.com/documents/SDS_BW_How_To_Debug_Update_Rules_and_Transfer_Rules%20.html
Debugging data upload in BW
Hope this helps.............
Rgs,
I.R.K

Arithmetical errors or conversion errors found in routine ROUTINE_0002

Hi Guru
Record 7884 :Arithmetical errors or conversion errors found in routine ROUTINE_0002 record 7884
I do research and found " open your URules (RSU3); in the menu extras, display generated program;
search for 0002; it could be a ROUTINE_0002 or a urule 0002 like form r0002_KEYFIGNAME"
dont have rountine_0002 in URules, routine_0001,routine_0003.
Please advice
with regards
Nikhil

Hi Jadeep,
My problem resolved. I am posting the solution. OSS Note - 910561.
- Arithmetic Error in 2LIS_02_SCL during upload into 0PUR_00
Symptom
The upload of schedule-line-data (source 2LIS_02_SCL) into the ODS 'Purchase Order Item Schedule Lines (0PUR_DS03) terminates
because of an arithmetical error which only occurs if the source field 'BWMWNG' is not filled.
Other terms
MM-PUR, SRM-Analytics, 2LIS-02_SCL, BWMENG, Purchasing, 0NETPRICE
Reason and Prerequisites
If the Field BWMENG is not filled (zero) in the source system this is not handled by the update rule for Info Object 0CPQUAOU which is mapped with the field BWMENG.
Solution
Implement the following coding in the update rule for InfoObject 0NETPRICE:
IF COMM_STRUCTURE-CPQUAOU GT '0'.
   RESULT = COMM_STRUCTURE-CPPVLC / COMM_STRUCTURE-CPQUAOU *
             COMM_STRUCTURE-numerator / COMM_STRUCTURE-DENOMINTR.
ELSE.
   RESULT = COMM_STRUCTURE-CPQUAOU.
ENDIF.
With regards
Syed

Can't save BISM file pointing to excel sheet (data source). ErrMsg: "There were errors found while validating the page: Cannot connect to the server or database."

Hi,
Me and a collegue is administrering our new enterprise BI portal in SharePoint 2013 (On Premise) and have a problem with using a specific Excel file including general ledger data as data source through a BISM file.
This particular BISM file can't be saved without getting the error message "There were errors found while validating the page: Cannot connect to the server or database."
BISM files against other Excel sheets and sources (for example SSAS tabular databases) works well.
Can anyone help us pinpointing whats wrong here, this is a really important stakeholder in our organization requesting this reporting?
Cheers!

Hi E.SWARD ,
My self created a Power pivot excel then i want to use this excel to create BI file . Still i am getting the same error . Pls help me to resolve this issue
Cannot connect to the server or database.
I am getting the similar error , if i use Tabular analysis server instance .
Subhash

Adobe update process fails due to Error 130200. solutions please

adobe update process fails due to Error 130200. solutions please. Shyam

Is there anything else beside the number 130200?
Try downloading the update from http://www.adobe.com/downloads/updates/
If you still need help, please tell us your operating system details.

Acrobat 9.5.1 update on Windows XP Error 1321 solutions don't work

Acrobat 9.5.1 update on Windows XP Error 1321 solutions don't work. I can't uninstall program. Error upon error.

Hi John,
I'm trying to install the SunMC 3.5.1 Console on
Windows XP with not much success. The install
displays the initial splash screen, but then fails
with the error :
The install wizard cannot proceed.
Aborting installation now...First, are you installing from a complete SunMC CD or CD image? If you just copied some files out of a CD/image you may have missed some jar files.
SunMC Consoles don't like to share systems with older versions of themselves. Try moving/renaming the directory your 3.5 Console is installed in (or uninstall it if you don't need it),... then try putting 3.5.1 in again.
All my demos/work/courses are on 3.5.1 on an XP laptop, so I know it works.
I think it's probably just not happy about 3.5 already being installed... so just move it out of the way for awhile to get 3.5.1 in (then put 3.5 back so you can have them both).
Regards,
Mike
The Java version is 1.4.2_03 .
The Release Notes etc don't give any clues.
Strangely, SunMC 3.5 works fine on this desktop..
Any ideas as to where I can go from here? This is
effectively stopping me from going from SMC 3.5 to
3.5.1, unless I can get the Console working..
Has anyone else had problems with SMC 3.5.1 on XP?
Thanks in advance.
John

Arithmetical errors or conversion errors found in routine ROUTINE_0011

Hi,
I am having a problem when trying to load a cube from an DSO. In the PSA 90 record appears with the error "Arithmetical errors or conversion errors found in routine ROUTINE_0011 record XXX"
I simulated and debbug the load and this routine have the code:
RESULT = ( COMM_STRUCTURE-/bic/zom_icoci
/ COMM_STRUCTURE-/bic/zom_icnrv ) * c_hundred.
I know that the field COMM_STRUCTURE-/bic/zom_icnrv can come with value zero and return me the msg error but I saw that none of the 90 fields are zero (value <> 0) in the DSO. And besides there are others records equals to the records with error that not generate the arithmetical error.
Could you help me to solve this problem?
Regards,

Hi,
Check if the c_hundred variable has same type as that of two keyfigures used in the formula.
Regards
Akhan

DCOM Error, found solut

Similar Messages

Maybe you are looking for