DCOM got error "2147942405" from the computer; Windows Server 2008 R2

I am trying to install the dpm 2012 agent on a Windows 2008SP2 server. An automatic install failed, so I installed the agent manually. After installing the agent I tried to associate the agent. I got a success message, but in the management console there
is an error under 'agent status'. If I try a refresh on the server I get this error on the DPM server:
DCOM got error "2147942405" from the computer HV5.ad.milwaukee.gov when attempting to activate the server:
{C4EBD674-1457-4B79-BE30-B04735AED9D1}
There is no firewall running on the Windows 2008 server.

I added the DPM server to the local administrative group on the target server, and that fixed the problem.

Similar Messages

  • Migrating DHCP Server From OpenSuse to Windows Server 2008 R2 Standard

    Hello,
    I'm planning to migrate a DHCP server from OpenSuse to Windows Server 2008.
    Is there any procedures for that ,Or should i configure my Windows server 2008 DHCP service again.
    Thank you 

    Hi,
    I have done somthing similar in the past. Basically i got exported all the scopes and settings from the linux dhcpd service, then created the scopes in Windows, stop linux dhcp service and start windows one. Use conflict detection setting to leverage any
    IPs lease from linux server.
    Hope it helps.
    Regards,
    Calin

  • Undefined error updating Adobe AIR on Windows Server 2008

    I am trying to upgrade from Adobe AIR version 2.7.1.1961 to version version 3.1.0.4880.
    The operating system is Windows Server 2008 Standard  - SP1
    I am logged on as the administrator and shortly in the upgrade process, I receive a Window stating:
    Sorry an error has occurred
    An error occured while install Adobe AIR. Installation may not be allow by your administrator.
    Please contact your administrator
    Following is the install log:
    [2012-02-15:15:56:56] Runtime Installer begin with version 3.1.0.4880 on Windows Server 2008 x86
    [2012-02-15:15:56:56] Commandline is:
    [2012-02-15:15:56:56] Installed runtime (2.7.1.19610) located at c:\Program Files (x86)\Common Files\Adobe AIR
    [2012-02-15:16:02:46] Relaunching with elevation
    [2012-02-15:16:02:46] Launching subprocess with commandline c:\users\admini~1\appdata\local\temp\1\air704f.tmp\adobe air installer.exe -ei
    [2012-02-15:16:02:46] Runtime Installer begin with version 3.1.0.4880 on Windows Server 2008 x86
    [2012-02-15:16:02:46] Commandline is: -stdio \\.\pipe\AIR_15060_0 -ei
    [2012-02-15:16:02:46] Installed runtime (2.7.1.19610) located at c:\Program Files (x86)\Common Files\Adobe AIR
    [2012-02-15:16:02:46] Starting silent runtime update. Updating runtime from version 2.7.1.19610 to version 3.1.0.4880
    [2012-02-15:16:02:46] Installing msi at c:\users\admini~1\appdata\local\temp\1\air704f.tmp\setup.msi with guid {FE23D063-934D-4829-A0D8-00634CE79B4A}
    [2012-02-15:16:02:46] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1601" errorID=0]
    [2012-02-15:16:02:46] Rolling back install of c:\users\admini~1\appdata\local\temp\1\air704f.tmp\setup.msi
    [2012-02-15:16:02:46] Rollback complete
    [2012-02-15:16:02:46] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1601" errorID=0]
    [2012-02-15:16:02:46] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1601" errorID=0]
    [2012-02-15:16:02:46] Runtime Installer end with exit code 7
    [2012-02-15:16:04:17] Runtime Installer end with exit code 7
    Other notes that might be of use is that I have tried to uninstall Adobe AIR with a similar error message.
    I am hoping someone can provide some insight on how to resolve this situation.

    Thanks for the links above.
    I downloaded and run the Microsoft Install and Uninstall Fix It. Thinking there could be issues with the current version of AIR, I ran the utility and chose to uninstall the current version of AIR; and was successful.
    I followed up by restarting the computer and then go to the Adobe AIR download page. When I try to install the new version, it get basically the same error message.  The log file from the install is below.
    [2012-02-16:18:07:14] Runtime Installer begin with version 3.1.0.4880 on Windows Server 2008 x86
    [2012-02-16:18:07:14] Commandline is:
    [2012-02-16:18:07:14] No installed runtime detected
    [2012-02-16:18:07:19] Relaunching with elevation
    [2012-02-16:18:07:19] Launching subprocess with commandline c:\users\princi~1\appdata\local\temp\air11d3.tmp\adobe air installer.exe -ei
    [2012-02-16:18:07:19] Runtime Installer begin with version 3.1.0.4880 on Windows Server 2008 x86
    [2012-02-16:18:07:19] Commandline is: -stdio \\.\pipe\AIR_2648_0 -ei
    [2012-02-16:18:07:19] No installed runtime detected
    [2012-02-16:18:07:19] Starting silent runtime install. Installing runtime version 3.1.0.4880
    [2012-02-16:18:07:19] Installing msi at c:\users\princi~1\appdata\local\temp\air11d3.tmp\setup.msi with guid {FE23D063-934D-4829-A0D8-00634CE79B4A}
    [2012-02-16:18:07:19] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1601" errorID=0]
    [2012-02-16:18:07:19] Rolling back install of c:\users\princi~1\appdata\local\temp\air11d3.tmp\setup.msi
    [2012-02-16:18:07:19] Rollback complete
    [2012-02-16:18:07:19] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1601" errorID=0]
    [2012-02-16:18:07:19] Runtime Installer end with exit code 7
    [2012-02-16:18:07:19] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1601" errorID=0]
    [2012-02-16:18:07:22] Runtime Installer end with exit code 7
    Finally, when I try to run the fixit tool again, it is of no practical use as there is no program to repair.
    Again,  I am hoping someone can provide some insight on how to resolve the current situation

  • Error trying to install SP1 Windows Server 2008 R2

    Hi team,
    I'm having an error when I'm trying to deploy service pack 1 of Windows Server 2008 R2. I try this scenario installing the SP1 in a workgroup machine and the results were successful. But when I'm trying to install in my Domain it doesn't work. Later I remove
    the machine from the Domain and again try to install the SP1 and it also doesn't work.
    What permissions in files or procedures can I implement for having a successful deploy of Service Pack 1 in my Domain?
    Thanks a lot for your assistance.
    Regards.
    David S.

    Follow troubleshooting
    http://windows.microsoft.com/en-us/windows7/troubleshoot-problems-installing-service-pack
    http://windows.microsoft.com/en-us/windows7/windows-7-windows-server-2008-r2-service-pack-1-sp1-installation-error-0x800f0a12
    Similar problem has been solved here
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/c4ac3279-1b2d-44d2-8e2e-08282f0ba270/cannot-install-sp1-on-windows-2008-r2-64bit-error-0x800f0818?forum=winservergen
    http://glazenbakje.wordpress.com/2011/12/01/microsoft-windows-2008-server-r2-unable-to-install-service-pack-1-fix/
    Regards
    Milos

  • Error Exporting Printer's Queue Windows Server 2008 ENTERPRISE SP2

    When I try to make a Backup the printers on Windows Server 2008 with Printer Migration
    I get the following error:
             Windows Encountered errors during the migration process. 
       please anyone can help me.

    Most likely someone performed some registry edits that although they got the print server operational, it blocks backups up through the Windows 7 version. 
    I have referenced a couple ways to get around this issue in the forum.   Here's a post with your issue.
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/3fb6f67d-c772-44f9-a45d-c9a7a85573a6/i-run-printer-backup-printbrmexe-at-win2008-r2-and-i-have-this-error-the-following-error-occurred?forum=winserverprint
    Alan Morris Windows Printing Team

  • Error In Installing AddOn on Windows Server - 2008

    Hello,
    I have created an addon on Visual Studio 2005 in Windows Server 2003 OS and then packaged that using B1DE Tool as ard file and run that on my system and the addon is working properly . But when i want to run that addon on system with operating System as Windows Server 2008 the addon is not getting installed and is giving as error message " Incorrect Format " and not even the exe of addon is not running on that server machine .What to do so that my addon works .
    Thanks & Regards
    Amit

    Hello ,
    My main problem occurs while creating the ard file .Normally While building AddOn installer file system creates .Ard file in Bin Folder. But when i creates the Ard File by changing the Target CPU as x86 Then a folder named x86 get created in the bin folder of AddOn Installer file without any ard file in that folder.Then i again build the addon installer project and copies the
    Exe file of x86 folder & Ard File of Bin Folder and deploy that on Server 2008 .Then the system is throwing a message "
    Wrong Digital Signature " that's where i am facing problem while creating ard file bychanging the compile mode to x86.
    Please suggest since its causing me problems in deploying on Client Server .
    Thanks & Regards,
    Amit

  • Error 0x80070643 when installing DHCP Windows Server 2008 ENTERPRISE SP2 64bit

            When I try to install role DHCP on Windows Server 2008  I get the following error:
           Attemp to install DHCP Server failed with error code 0x80070643. Fatal error during installation. 
                 Please somebody help me!....
                Jorge

    Hi Jorge,
    I am sorry to hear that.
    Here are a few things that I suggest you try:
    Grant Full Control for SYSTEM, NETWORK SERVICE and Administrator on C:\Windows\ServiceProfiles\networkservice folder.
    If you have Windows Process Activation service installed on the machine, uninstall it.
    Open required RPC ports.
    More information for you:
    Service overview and network port requirements for Windows
    http://support.microsoft.com/kb/832017#method7
    If the issue still persists, please check the event logs to see if there are any related error messages and troubleshoot accordingly.
    Regards,
    Amy

  • I want downgrate the lic windows server 2008 SBS prem to server 2003 standard

    Dear Sir,
    We have purchsed windows server 2008 SBS prem edition
    and i want downgrade that lic in to windows server 2003 standard edition
    past 4 days i m trying to complete the procedure but still i m done that
    now i have created one hotmail account
    please  provide me right step to complete that 
    [email protected] 
    This is my officeal mail to please get back to reply me ASAP
    Lakhan Sawant

    There is no downgrade procedure.
    A downgrade is 'licensing only'.
    You need to have a copy of Windows Server 2003 Standard Media to install, you will also need a license key for 2003.
    Robert Pearman SBS MVP
    itauthority.co.uk |
    Title(Required)
    Facebook |
    Twitter |
    Linked in |
    Google+

  • Get 0x80780124 error when trying to restore Windows Server 2008 R2

    We are trying to restore a HP Proliant ML350 G6 Windows 8 R2 Server but every time we do we get a message that states "The system image restore failed error details: Windows Backup failed to extend or mount the file system on the recovered volume.
    (0x80780124)" We were trying the restore from the CD. Any ideas what would be causing the issues?

    Hi,
    Please try to run chkdsk on the backup vhd to see if you can restore the server. In additional, you can also refer to the thread below to troubleshoot the issue:
    SBS 2011 Bare Metal Restore Failed
    http://social.technet.microsoft.com/Forums/en-US/bd90747a-3e5d-47b3-8a67-748864aa20f4/sbs-2011-bare-metal-restore-failed?forum=smallbusinessserver
    Regards,
    Mandy
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • I updated my iphone 4 and got error 50, now the computer does not recognize my device and my hone hsa to be set up again but when it ask to restore my phone on itunes, my phone number is not an optio on there HELP

    How do I get my phone set back up and can i retrive everything that seems to be lost

    Hello Hilda Louise
    Start with the article below to get your iPhone to be recognized in iTunes again. Then you will probably need to restore it to get it back up and running.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Regards,
    -Norm G.

  • ERROR CODE 8024404 WHILE UPDATING WINDOWS SERVER 2008 ENTERPRISES EDITION SP1

    Hi ,
    i am getting error while updating windows updates i have tried disable Escan anti virus i tried again to update windows but same error showing 

    Hi,
    Based on current situation, please run this Fix tool. Then check if this issue still persists.
    Fix the problem with Microsoft Windows Update that
    is not working
    If still exists, please refer to the following KB and reset Windows Update components. Then monitor the result.
    How do I reset Windows Update components?
    Meanwhile, you can also use the System Update Readiness tool and then reinstall the update again. For more
    details, please refer to this KB.
    In addition, regarding to going further analysis, we can check the WindowsUpdate.log file. It may provide more
    details. For detailed operations, please refer to the following KB.
    How to read the Windowsupdate.log file
    Hope this helps.
    Best regards,
    Justin Gu

  • Windows Server 2008 firewall. Inbound connection is blocked as outbound?

    I connect using "Computer Management" from computer A to computer B. Both computers are Windows Server 2008 x64 with all current hotfixes. The connection succeedes, and I don't even try to open any of the sub-snapins.
    But computer A (the connection source) logs the following event in its System Log:
    Log Name:      System
    Source:        Microsoft-Windows-DistributedCOM
    Date:          9/13/2008 8:59:58 PM
    Event ID:      10006
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      <Computer A name's here>
    Description:
    DCOM got error "2147944122" from the computer <Computer B FQDN's here> when attempting to activate the server:
    {03837521-098B-11D8-9414-505054503030}
    And computer B (the connection destination) logs the following two events (three times each) in its Security Log:
    Log Name:      Security
    Source:        Microsoft-Windows-Security-Auditing
    Date:          9/13/2008 9:00:11 PM
    Event ID:      5152
    Task Category: Filtering Platform Packet Drop
    Level:         Information
    Keywords:      Audit Failure
    User:          N/A
    Computer:      <Computer B name here>
    Description:
    The Windows Filtering Platform blocked a packet.
    Application Information:
     Process ID:  568
     Application Name: \device\harddiskvolume1\windows\system32\services.exe
    Network Information:
     Direction:  Inbound
     Source Address:  <Computer B IP's here>
     Source Port:  57144
     Destination Address: <Computer A IP's here>
     Destination Port:  63485
     Protocol:  6
    Filter Information:
     Filter Run-Time ID: 0
     Layer Name:  Receive/Accept
     Layer Run-Time ID: 44
    and
    Log Name:      Security
    Source:        Microsoft-Windows-Security-Auditing
    Date:          9/13/2008 9:00:11 PM
    Event ID:      5157
    Task Category: Filtering Platform Connection
    Level:         Information
    Keywords:      Audit Failure
    User:          N/A
    Computer:      <Computer B name here>
    Description:
    The Windows Filtering Platform has blocked a connection.
    Application Information:
     Process ID:  568
     Application Name: \device\harddiskvolume1\windows\system32\services.exe
    Network Information:
     Direction:  Inbound
     Source Address:  <Computer B IP's here>
     Source Port:  57144
     Destination Address: <Computer A IP's here>
     Destination Port:  63485
     Protocol:  6
    Filter Information:
     Filter Run-Time ID: 0
     Layer Name:  Receive/Accept
     Layer Run-Time ID: 44
    Well, I already know that events 5152 and 5157 are nearly the same, so we need to look only into one of them in each case. But what's next?
    It seems to me that the firewall here treats the initial connection and a responce as two different connection. So it allows the initial connection (from A to B) because I have some rules in place that are supposed to allow remote management. But then it blocks the responce (from B to A). In this case, looking into separate connection from B to A, I guess, it should treat it as outbound and not filter at all. But it still calls it "Inbound" for some reason, apply some firewall rules and blocks it.
    Are my assumptions wrong? What are the explanation for this behaviour? How do I prevent the packets from being blocked?

    Many thanks. That sounds almost logical.
    Your statement regarding "no real reason to disable" is not exactly valid. There are myriad reasons to actually disable the service itself - one of which is other software that conflicts and sees the 'service' state, and not the 'profile state' of the firewall
    settings. Those products - let me give you at least one as an example... wait for it... wait for it... The 'infamous' SQL Server!
    Yes, pups and pupettes, that' is correct - SQL Server does indeed give you a "false positive" during its pre-req checks and so forth; and and tells you, "Oops, dear systems manager, your firewall service is still enabled... blah blah"  - that's not
    the exact quote, but very close indeed. Does it bother to check and see that, "OH, well, you've got firewall disabled for ALL profiles, so all is cool?" Noooo, of course it doesn't. [Note to Microsoft, please fix this!]
    Now, it may be okay [at this point], since I already have SQL server properly installed, and past all the "pre-checks," to re-enable the firewall service; but, to just off-hand say "there's NO reason whatsoever to disable the firewall service;" well, that
    is just not correct.
    For that matter, there are many of us who completely 'remove' the service - yes, it can be done - and, yes, I have written a technical article on doing just that; and, no, it will NOT cause unpredictable results - [IF] done properly and [IF] all the technical
    whatcha-ma-jig-its are lined up with the North Star when Pluto is in retrograde.
    But, yes, it is best just to let policy take care of disabling the various levels of the firewall and then leave the service as-is, since Microsoft puts more and more hooks in their o/s.
    Thanks again.

  • Windows Server 2008 R2 as a resources

    Hello All,
    Has anyone successfully used Server 2008 R2 as an IdM managed resource?
    Thanks for all replies.

    Hi There !!!
    I want to use  Windows server 2008 R2 as a router for a lab setup. I have a DC, Exchange and some other machines. I want to use member server to use as a router. I have installed the routing and remote access role. I have also enabled it. 
    I am able to ping internal ips and external ips from the router ( Windows sErver 2008 r2 machine). The problem is that i am not able to ping other subnet from internal PCs ( ANY Of them).
    Regards,
    Mohammed.
      But how did you configure it? You should be able to see other subnets if you configured it as a NAT router (but they will not be able to see your new subnet). If you configured it as a LAN router, you will only be able to contact other subnets if
    you have set up the necessary routing so that they know how to reach your new subnet.
    (Hint - what is the default gateway of the other subnets?)
    Bill

  • Windows server 2008 r2 operating system not booting in normal mode after unstalled the virus gaurd

     Windows server 2008 r2 operating system is not booting in normal mode after i uninstalled the virus guard in the system. I tried to repair the system but repairing  option not available in server 2008. i can log in to the system only safe mode.
    Please help me to solve this issue as soon as possible .I do not have the any system backup with me .

    Hi,
    Regarding the issue here, please restart the computer and press F8 until you see the
    advanced boot options, select start windows normally, 
    if it starts with no problem, please check if you have the option boot from safe mode checked:
    run->type msconfig->tab boot->boot options, check if the
    safe boot is selected, if yes please uncheck it. Then restart the computer to check if this problem still exists.
    If the system needs repair, please take a look into the below WIKI article, and check the event viewer to see if any errors for further troubleshooting.:
    Windows Server 2008 Repair Steps for No Boot Issues
    http://social.technet.microsoft.com/wiki/contents/articles/4162.windows-server-2008-repair-steps-for-no-boot-issues.aspx
    Hope this helps
    Best regards
    Michael
    If you have any feedback on our support, please click
    here.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Unable to install SCCM client on Windows Server 2008 R2 - certificate permission error?

    I am trying to comply with corporate policy, which is, have an SCCM agent or client on every Windows device. I have successfully used the provided SCCM installer on other Windows 2008 R2 servers. However for one particular server I cannot get the SCCM agent
    to install successfully. I've searched forums and documentation, but can't find a solution. Part of the problem is the lack of feedback by SCCM on what is wrong. I think I have narrowed down the symptom to the following error messages from the "C:\Windows\CCM\Logs\ClientIDManagerStartup.log":
    [LOG[Certificate [Thumbprint C559304C1598F17641D0732EB9EB787169A25FA7] issued to 'SMS' doesn't have private key or caller doesn't have access to private key.
    [LOG[Failed in GetCertificate(...): 0x87d00281]LOG]!><time="10:56:59.014+300" date="04-17-2014" component="ClientIDManagerStartup" context="" type="3" thread="3024" file="ccmcert.cpp:2122">
    [LOG[CCMCreateAuthHeaders failed (0x8009200b).]LOG]!><time="10:56:59.014+300" date="04-17-2014" component="ClientIDManagerStartup" context="" type="3" thread="3024" file="clientauthutil.cpp:978">
    When I use the Certificates MMC snap in to look at installed certs on this Windows Server 2008 R2 machine, there are plenty of normal and expected certificates there. There is also a branch called SMS with hundreds of entries, I have no idea what that is.
    The above error seems to indicate a permissions issue. What do I do to fix this SCCM install? It seems like a server cert issue, not an SCCM issue, so I'm posting to the Windows Server forums.
    Thanks in advance.
    Thanks

    this maybe helpful...
    http://www.jamesbannanit.com/2011/04/certificate-requirements-for-sccm-2012/
    should be asked in SCCM forum...
    http://social.technet.microsoft.com/Forums/en-US/home?forum=configmanagerdeployment
    Best,
    Howtodo

Maybe you are looking for