DCOM subsystem detected while Creating .appv package through APP-V 5.0 Sequencer

Hi,
I am getting DCOM Subsystem Detected while Sequencing the Adobe illustraterthrough APP-V 5.0 Sequencer .
I have attached the error .is any impact will be to run this .appv package on app-v , and if there is some issue whar are the solution for this?
Shailendra
Shailendra Dev

What version of Adobe Illustrator?
Double-click on the issue to see the list of DCOM components that are affected. You'll need to deploy the application to a client and verify the functionality.
Please remember to click "Mark as Answer" or "Vote as Helpful" on the post that answers your question (or click "Unmark as Answer" if a marked post does not actually
answer your question). This can be beneficial to other community members reading the thread.
This forum post is my own opinion and does not necessarily reflect the opinion or view of my employer, Microsoft, its employees, or other MVPs.
Twitter:
@stealthpuppy | Blog:
stealthpuppy.com |
The Definitive Guide to Delivering Microsoft Office with App-V

Similar Messages

Version error while creating info package of data source 0fi_gl_10

Dear Friends,
I have replicated the data source 0fi_gl_10 into sap bw but while creating info package i am getting error " The DataSource 0FI_GL_10(E01CLNT200) does not exist in object version A". IS the manual activation always should be done for that ?
Regards
Nilesh

Hi,
Please check if the veriosn of DataSource is A or not. Sometimes it shows as active but if you open the datasource then it might be in modified version only. Do activate it manually, it will serve your purpose to create a infopackge.
Regards,
Anjum.

Save EAN11 field while creating POrder creation through Function module

Hi All,
I want to update EAN11 field in material master while creating Purchase Order through function module. I am using function module BAPI_PO_CREATE1 for creating purchase order. There are no structures in the PO creation FM in which EAN11 field is there. I have also tried using function module MEPO_DOC_ITEM_PROCESS for updating EAN11 field. It is not working. Please suggest some method to do that.
Note: I am receiving EAN11 through an external system by proxy.
Thanks,
Chinmay

Hi,
Use BAPI_MATERIAL_SAVEDATA to updat ean numbers for materials.
tables INTERNATIONALARTNOS is used to update EAN.
Regards,
Shanmugavel Chandrasekaran

Update mode options while creating info package

Hi all .
while creating info package in update tab we have different radio buttons as
FULL UPDATE,DELTA UPDATE,INTIALIZE DELTA PROCESS. could you pls explain this optons.
Thanks in advance.
Cheers,
sami.

Hi Sami,
We have two update modes 1)Full update 2)Init Load(to enable delta)
Full Load --->Master data Load
Init Load----->Transaction data Load.
Full Update-To load Historical Data.
Init-This is done to enable the Delta Upload.
Delta will be done only if the Init has happened.
For deltas they are Data source specific which are delta enabled.
1. Full Load (Extracts whole data available in source)
2. Initialization (without data transfer): Enables only delta and no data.
3. Initialization with data: Extracts whole data from source and enables delta.
4. Delta: Extracts only modified or new data.
Above modes works for Master as well as Transaction also.
For further information check this link:
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a65dce07211d2acb80000e829fbfe/frameset.htm
Cheers,
Tanish.

*Error while creating Trave Requset through ESS*

Hi,
We are getting following error while creating request through ESS:
Entry not found in table T706V. Argument: 40P IN 0010120090608
The estimated travel amounts could not be determined
Errors have been discovered when checking the Expense Report. Please correct them in order to proceed.
Whereas we have already maintained entries in the same table.
Please reply urgently...
Thanks
Neha

Hello,
The solution is documented in Travel Wiki:
https://wiki.sdn.sap.com/wiki/display/ERPHCM/Entrynotfoundintable+T706V
Regards,
Raynard
Edited by: Raynard Coscolluela on May 8, 2009 10:53 AM

While creating a student through piqstc getting abap run time error

Hi Experts,
I am new to SLCM,
By following Micheal Fan's Basic configuration document,
I have done the basic configuration required for creating a student & maintaining the student file,
But while trying to create a student through PIQST00/PIQSTC getting abap run time error,
Attaching the txt file for complete view of abap error.
Please guide how to resolve this error.
Regards,
Prashanti Swain

Hi Rob,
Thanks a ton, for your quick reply,
But I have not understood the reason of the issue.
As i said I followed Micheal Fan's Document for configuration,
in that document there is no configuration step is defined for Vendor master data.
Could you please explain it in a more detail way.
Regards,
Prashanti Swain

Problem while Creating Service order through Work Order

Hi Gurus,
I have a problem While creating Service order (me21n) through - Work order it contains service requisitions.
So that means they carry information such as G/L and work order number while entering the requistion no in PO Creation Screen (me21n) which automatically should be picked from the work order refference.
But problem here is the service items and all other are assigned to PO except the Account Assingnment tab which is GL Account and Work Order No and Cost center..
Can anyone explain me this?
Is this something that one can explain?
Regards,
Murugesh R
Rewards for value replies.

Closed..

Difference between use of IS and AS while creating a Package or Procedure

Hi,
Had an interview in one of the company.
They asked me this, "What is the difference between using IS and AS while creating Package or Stored Procedure ?".
I checked creating package with same IS and AS, but there is no issues.
Kindly clarify me on this.
Lots of thanks in advance.
Regards,
Shiva

>
Had an interview in one of the company.
They asked me this, "What is the difference between using IS and AS while creating Package or Stored Procedure ?".
>
Quite frankly my first response to them would be: why do you even care?
That would be quickly followed by: do you have any meaningful questions you would like to ask? Perhaps something that might actually be relevant to what you do here?
I personally don't care if someone has memorized the syntax required to create DDL/DML. I care whether they know how and when to use it.
Check the docs for the syntax diagram and from at least 9i on it will be similar to this from 9i
http://docs.oracle.com/cd/B10501_01/appdev.920/a96624/08_subs.htm
>
A procedure is a subprogram that performs a specific action. You write procedures using the syntax:
[CREATE [OR REPLACE]]
PROCEDURE procedure_name[(parameter[, parameter]...)]
[AUTHID {DEFINER | CURRENT_USER}] {IS | AS}
[PRAGMA AUTONOMOUS_TRANSACTION;]
[local declarations]
BEGIN
executable statements
[EXCEPTION
exception handlers]
END [name];
>
Here is the link for 11g
http://docs.oracle.com/cd/B28359_01/appdev.111/b28370/create_procedure.htm
Note that the syntax for some objects requires one or the other and will not accept both.
>
CURSOR x IS ...
TYPE x IS ...
SUBTYPE x IS ...
CREATE TABLE x AS subquery
SELECT x AS "y" FROM z AS "w"
WITH x AS (SELECT ...

Error while creating a package

When I am creating a package which has 3 procedures(x,y,z) I am getting an error saying "Subprogram or Cursor "y" is declared in a package specification and must be defined in the package body. I have put the code in the package body script but I keep getting this error. Please Help.

Surely we will if you can paste the code and the error that you get. Remember to paste the code between[b] [pre] and [/pre] tags to retain the format.
Cheers
Sarma.

Error message AA119 while creating asset master through AS01

Hi
while creating asset master (AS01), i am getting following error:-
Depreciation key M003 not allowed (Check your entry)
Message no. AA119
Diagnosis
Depreciation key M003 is not defined.
System Response
Processing is terminated.
Procedure
You have the following choices:
Use a defined depreciation key (use input help).
Define a depreciation key in Customizing ("change" pushbutton) and activate the key.
I have done following in configuration:-
1) No change in base method
2) copied multi level method from standard key "011" to "M03" and maintain vlaue as - Acquisiton year - 9999, Years - 999, Validity period in month - 12, Base value key as - 01and depreciation % as 10
3) No change in Period Control Methods
4) Copied standard depreciation key "GL20" as "M003" and maintain the multilevel method as "M03"
5) save the configuration
6) Activate the depreciation key by selecting depreciation key and clicking on Activate button on top of the screen
7) Import the configuration
now while creating asset, depreciation key M003 is appearing in drop down list but getting above error. but if I tried with depreciation key GL20 (which is standard depreciation key) system accepting the input
In target client, depreciation key display in Active stage.
please revert if anybody has any clue to come out from above problem.
Regards
DD

Dear All Foram members
Thanks for your response.
I got the solution and now problem has been resolve.
Initially i have maintain Scrap Value as Default Value from Company code and Depreciation Area in Depreciation Key (AFAMA) and I was getting the error. But now I have change the Scrap Value as CutOff Value is ignore and problem gets resolve.
But still do not understand the relation between the erro and Scrap Value assignment. Any Idia. It will be helpful for other members also.
Thanks Pankaj, Madhu and Paul...........
Regards
DD

Geting error while creating a dir through CREATE DIRECTORY command

Hi Gurus,
When I'm trying to create a dir through this command with logged in as SYS
CREATE DIRECTORY pump_dir AS 'd:\temp\pump_dir';
I'm getting the error
Error starting at line 1 in command:
CREATE DIRECTORY pump_dir AS 'd:\temp\pump_dir'
Error at Command Line:1 Column:18
Error report:
SQL Error: ORA-00955: name is already used by an existing object
00955. 00000 - "name is already used by an existing object"
Any ideas how I can create a dir and grant access to a different user.
Thanks
Amitava.

amitavachatterjee1975 wrote:
I checked and there is no such directory. I guess it is not that simple, the error I mean.Actually it is , please see,
ORA-00955:     name is already used by an existing object
Cause:     An attempt was made to create a database object (such as a table, view, cluster, index, or synonym) that already exists. A user's database objects must have distinct names.
Action:     Enter a unique name for the database object or modify or drop the existing object so it can be reusedSo as Sb mentioned, check that which object is using the same name that you are trying to assign to this directory object and either rename or drop the object if you want to use the same name only. If not, you can always use another distinct name for this directory object .
Aman....

Error while creating Supplier Contact through API

Hi,
I am not able to create supplier contact through an API: ap_vendor_pub_pkg.create_vendor_contact
The return status (x_return_status)from the API is 'U' and x_msg_data is 'FND'.
Please help with your suggestions !
Thanks,
Sambit

Hi Hussein,
Yes the only meesage that is coming in the pot parameter of the API is: 'FND'
The code snippet is as below:
===================================================
fnd_global.apps_initialize(user_id => v_user_id,
resp_id => v_resp_id,
resp_appl_id => v_application_id);
mo_global.set_policy_context(
'S', v_org_id);
v_message := v_message || chr(13) || 'Assigning values for the api ';
v_vendor_contact_rec_type.vendor_site_id := v_vendor_site_id;
v_vendor_contact_rec_type.vendor_id := v_vendor_id;
v_vendor_contact_rec_type.person_first_name := v_first_name;
v_vendor_contact_rec_type.person_last_name := v_last_name;
v_vendor_contact_rec_type.email_address := '[email protected]';
v_vendor_contact_rec_type.org_id := v_org_id;
v_message := v_message || chr(13) ||
'Before calling AP_VENDOR_PUB_PKG.CREATE_VENDOR_CONTACT api ';
BEGIN
ap_vendor_pub_pkg.create_vendor_contact(p_api_version => v_api_version,
p_init_msg_list => fnd_api.g_false,
p_commit => fnd_api.g_false,
p_validation_level => fnd_api.g_valid_level_full,
x_return_status => v_return_status,
x_msg_count => v_msg_count,
x_msg_data => v_msg_data,
p_vendor_contact_rec => v_vendor_contact_rec_type,
x_vendor_contact_id => v_vendor_contact_id,
x_per_party_id => v_per_party_id,
x_rel_party_id => v_rel_party_id,
x_rel_id => v_rel_id,
x_org_contact_id => v_org_contact_id,
x_party_site_id => v_party_site_id);
v_message := v_message || chr(13) ||
'After calling AP_VENDOR_PUB_PKG.CREATE_VENDOR_CONTACT api: '||v_msg_data;
=========================================================================
Output: v_msg_data= FND
Thanks,
Sambit

Authentication error while creating directory server through dscc

Hi
I am getting authentication error while creating a DS from dscc on windows box on a linux RHEL4 server.However I do not get an authentication issue when creating a ds on solaris box from same dscc.
Can someone guide me what might be the issue?
Thanks
Aarti

Hi,
Please check there is no firewall issue between your windows client to Linux directory server. You may be able to login via dscc but when you create DS instance, your dscc agent port might be an issue not able to talk to Directory server because of firewall.

Getting error while creating a new web app saying "The password supplied with the username domainname\username was not correct. Verify that it was entered correctly and try again"

Hi ,
I am trying to create a new web app using Central Administration in Sharepoint 2010 and getting an error "The password supplied with the username was not correct. Verify that it was entered correctly and try again".
I tried running this command also "stsadm -o updatefarmcredentials -userlogin <domain\username> -password <newpassword>" but when it got executed it showed me "Access Denied".
What should i do ??
Thanks in advance.
Regards, Anurag

HI,
right click on command icon and click run as administrator then use above stsadm commend to update credential. If still you face same issue then try with powershell as mention in below link: (make sure that you open sharepoint powershell as run as administrator)
http://smartrider.wordpress.com/2010/07/15/powershell-script-to-create-web-application-and-site-collection-in-sharepoint-2010/
let us know your result
Hemendra: "Yesterday is just a memory,Tomorrow we may never see"
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
you see a reply being an answer to the question of the thread, click "Mark As Answer

Error while creating Auxiliary database through RMAN on the same host.

I got the following error while cloning a stand by database through RMAN.
I got the following error while cloning a stand by database through RMAN.
[oracle@localhost admin]$ rman auxiliary sys/clonedb@clonedb
Recovery Manager: Release 11.1.0.6.0 - Production on Mon Sep 19 10:51:48 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04006: error from auxiliary database: ORA-12154: TNS:could not resolve the connect identifier specified
My LISTENER looks like this:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(ORACLE_HOME = /u01/app/oracle/product/11.1.0/db_1)
(SID_NAME = ora11g)
(SID_DESC =
(ORACLE_HOME = /u01/app/oracle/product/11.1.0/db_1)
(SID_NAME = CLONEDB)
TNS Names:
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORCL)
CLONEDB=
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = CLONEDB)
And SQLNet.ora
NAMES.DIRECTORY_PATH= (TNSNAMES,HOSTNAME, EZCONNECT)
Any help would be highly appreciated.
Thanks,
-Revku.

Hello,
I think there is something wrong with the ")" in the listener.ora : the second SID_DESC is not part of the SID_LIST.
Instead of
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(ORACLE_HOME = /u01/app/oracle/product/11.1.0/db_1)
(SID_NAME = ora11g)
(SID_DESC =
(ORACLE_HOME = /u01/app/oracle/product/11.1.0/db_1)
(SID_NAME = CLONEDB)
)It should be :
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(ORACLE_HOME = /u01/app/oracle/product/11.1.0/db_1)
(SID_NAME = ora11g)
(SID_DESC =
(ORACLE_HOME = /u01/app/oracle/product/11.1.0/db_1)
(SID_NAME = CLONEDB)
)Hope it will help.
Regards,
Sylvie

DCOM subsystem detected while Creating .appv package through APP-V 5.0 Sequencer

Similar Messages

Maybe you are looking for