Dconf-editor not working in gnome 3.

I've spent the past 3 weeks trying to figure this out before asking anyone, but alas, I am at a loss.
I'm trying to simply change a few accels. Mainly the Ctrl-Delete to Delete, and to change a few shortcuts in rhythmbox. Most every resource tells me to do it either through gconf-editor or dconf-editor. From what I gathered, dconf-editor is what everything is changing to. However I don't have a /desktop/gnome/interface/... section in dconf-editor.
Example:
dconf-editor screenshot
Any help would be appreciated, I'm sure it's something simple.
Cheers,
Matt

Run dconf-editor, and open:
org -> gnome -> desktop -> interface
Enable "can-change-accels".
http://www.rebelzero.com/tweaking/gnome … orking/317

Similar Messages

Scroll bar on editor not working

I recently upgraded to phtoshop elments 11.0 to 13.0
In the editor mode I cannot use the scroll bar. The scroll bar works fine in the orgnizaer mode. I have tried three different mouses and there is no difference.
Tom Fitch, San Antonio Texas

I am using Windows 7 Professional
In the organizer portion the scroll bar moves. When I put my mouse or
arrow on the scroll bar and drag it then of course I move through the different
rows of folders or rows of pictures once in the photo bin.
It was doing it with Photoshop Elements 11.0 and I thought 13.0 might fix
the problem and the scroll bar did move on the first try but not since then.
When I try and load the photo bin and I am choosing the right folder to
load the scroll bar just does not move. I can select the right folder by
using my up and down arrow or the page up and down and then click on the right
folder and then it loads.
Once I get the right folder of pictures loaded and once I finish the first
row of pictures I cannot use my mouse and arrow to drag the scroll bar
down to get to the next row of pictures. I can place my arrow on my mouse
below the scroll bar and got to the next row but I usually get only half the
picture and sometimes only 1/4 of it but I can usually get it loaded up and
edit the pictures and move on the next picture but it is very slow and
frustrating.
Any help would be appreciated.
I protested to an adobe supervisor and I got an e-mail and somebody is
supposed to call me tomorrow so hopefully then can log on to my computer and
see what I am talking about.
Sound like something got corruped in the editor mode only. I tried 3
different mouses and even the computer mouse and no difference.
Tom Fitch
In a message dated 12/17/2014 5:05:37 P.M. Central Standard Time,
[email protected] writes:
scroll bar on editor not working
created by RKelly_ (https://forums.adobe.com/people/R_Kelly) in
Photoshop Elements - View the full discussion
(https://forums.adobe.com/message/7024909#7024909)

Graphical editor not working

Hi,
SAP Graphical editor not working. I am getting the following error.
EU_SCRP_WN32 : timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Last week its sucessfully working but suddenly happen this issue... This problem in development server only. In production server is sucessfully working.
Please advise...
Regards
Rajesh.

Hi Rajesh,
It looks to be RFC connection issue.
Refer to various solutions described in below SAP note
101971 - 37527 Graphical full screen is not available (RFC)
Alternative
Workaround
You can prevent the termination of the RFC connection by increasing the value of the timeout parameter for the relevant RFC destination. Call transaction SM59, choose the TCP/IP connection "EU_SCRP_WN32" and branch to the "Special Options" tab page. In the section "Keep-Alive-Timeout" select the option "Specify Timeout" and enter a longer wait time (for example, 300 seconds). Undo this change once you use the corrected program version.
Hope this helps.
Regards,
Deepak Kori

PSE12 editor stopped working - sas elements 12 editor not working - how can i get editor to work - which has been working fine for a yhearÉ

PSE12 editor stopped working - sas elements 12 editor not working - how can i get editor to work - which has been working fine for a year nowÉ

Thanks for the quick response ...
I had already tried deleting the review slide itself, though Captivate wouldn't let me - it just hid it. I tried again using the method you recommended but the slide remained in the filmstrip, so I tried deleting again, then re-added it from the Quiz Settings page ... no joy, same behavior as before.
I checked the Advanced Interaction page and confirmed that all of the scored questions were configuredthe same way as the non-scored questions, with the only difference being the pool that they were drawing from.
Other thoughts? I am by no means a Captivate expert but this one really feels like it shouldn't be this hard, and I'm more than a little afraid that it's the file itself that's jacked up ...

I am in Elements 12 - and I cannot open the Editor - it says elements editor not working - any suggestionjs?

Has anyone experienced Editor not working - and got an answer from Adobe?

Try this DNS ...
Open System Preferences > Network > Advanced > DNS
Click + and type:
208.67.222.222
Click + again and do the same.
208.67.220.220
Click OK.
Quit and relaunch Safari to test.
*** When you post for help, please state which OS X is installed.
If you aren't sure, click About this Mac from your Apple menu 
Troubleshooting advice can depend on that information.

N4S: Web Dynpro for ABAP layout editor not working

Have problem in Layout editor in Web Dynpro for ABAP
I have installed NW04S Testdrive on 64bit Linux and able to login.
SE80 is working alright.
Next I create a Web Dynpro Comp. / Intf. and create a component.
I double click on the View name "V_Default" . The Layout editor opens on the right side. Change into Edit Mode.
The "View Elements" panel on the left side of layout editor is missing. This is where we select the various elements like "Textview" etc.
Even the right click on the "ROOTUIELEMENTCONTAINER" to insert elements using context menu does not work.
In summary I am not able to add any element in WD4A Layout screen.
Is there any special plugin required to be installed?
How to solve this problem?

you cannot develope Webdynpro for ABAP using ECC5
This is available with netweaver 2004s (WAS7.0) for which ramp up is going on right now and the general availability is expected sometime around 1st quarter for 2006.
Regards
Raja

Adobe forms layout editor not working

Hello
the layout editor in <b>sfp</b> transaction for adobe forms is not working... it says " could not open layout editor" .
can anyone plz suggest whether anything needs to be installed while installing the gui or any patch would do ...
or atleast where to find the patch ..
thanks in advance !

Hi,
Actually, after a bit more checking I've found SAP note 962763 with more detail.
You do need Adobe LiveCycle Designer and can download the installer from SAP Service
Marketplace:
http://service.sap.com/installations
Entry by Application Group
-> SAP NetWeaver
-> SAP NETWEAVER
-> SAP NETWEAVER 2004S
-> Installation and Upgrade
-> <Choose any OS and DB combination.>
-> Adobe LiveCycle Designer 7.1
Refer the links -
Adobe interactive forms tutorial
adobe forms
Adobe Forms
Regards,
Omkar.

JSP-Editor not working properly

Hi everybody,
I am working with ISA5.0 and NWDI. I have checked out the Web-Module Project crm/isa/web/b2b.
Now I would like to modify JSP-Files. Unfortonately the JSP-Editor is not working properly.
The JSP-Editor cannot resolve references to Tag-Libraries like
<%@ taglib uri="/isa" prefix="isa" %>
Furthermore I get Errors with JSP-Includes
<%@ include file="checksession.inc" %>
The JSP-Editor does not show any other compile errors until the above mentioned errors are resolved.
So the JSP-Editor does not help with compile errors.
I have tried to use Lomboz instead, but due to the modularization in ISA5.0 and NWDI (ie the Taglibraries are defined in a separate module) I did not get it to work either.
Does anybody have experience on how to get the JSP editor to work properly?
Thanks for your help,
Andreas

Highlite the clip in the timeline, control click on it and choose "send to soundtrack as an audio file project" in the pop up menu. Don't do an "open with editor". This should work.
If it doesn't and it's just the one clip, you could launch Soundtrack and then open that clip as an audio project . . . don't do a open with editor, just open it directly. Make your adjustment and save over writing the file with the new audio. You may want to copy the clip first as a backup. When you open your FCP project, you'll have to re-link the clip. Once you do it will show up with the new sound.

Issue in SAP GUI 7.0 for ECC6 (ABAP Editor not working)

Dear SAP Team,
We have installed SAP ECC6.0 EHP4.We have installed SAP GUI 7.0 in our clients machine but in some machines the ABAP Editor i.e Tcode SE38 is not working properly.When our Client selects any transaction for editing the system gets HANG.
We have tried uninstalling & reinstalling the software & the patch but the problem still persists.The configuration of all our client machine are same & we work on Windows XP platform.Please help us in solving our issue as soon as possible.
Thanks & Regards,
Manoj Mhatre.

Dear Manoj
you mean the SAP Gui for windows 7.20 or 7.10?
Please install the latest Sapgui Patch 3 for the Sapgui 720, or the Sapgui
Patch 19 for the Sapgui 7.10.
As workaround, please use the OLD frontend editor.
Best regards,
Sven

Hibernate mapping editor not working fully

My hibernate mapping editor is not working fully. I can manually enter a new property into the xml and the design pane will update but if I try to add a new property in the design pane it only adds "<property/>" without the attributes specified.
I looked at my workshop log and I did find the following exception:
BEGIN EXCEPTION-
!ENTRY org.eclipse.ui 4 0 2007-03-13 09:08:37.939
!MESSAGE Failed to execute runnable (java.lang.NullPointerException)
!STACK 0
org.eclipse.swt.SWTException: Failed to execute runnable (java.lang.NullPointerException)
     at org.eclipse.swt.SWT.error(SWT.java:3374)
     at org.eclipse.swt.SWT.error(SWT.java:3297)
     at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:126)
     at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:3325)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:2971)
     at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1914)
     at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:1878)
     at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:419)
     at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
     at org.eclipse.ui.internal.ide.IDEApplication.run(IDEApplication.java:95)
     at org.eclipse.core.internal.runtime.PlatformActivator$1.run(PlatformActivator.java:78)
     at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:92)
     at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:68)
     at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:400)
     at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:177)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.eclipse.core.launcher.Main.invokeFramework(Main.java:336)
     at org.eclipse.core.launcher.Main.basicRun(Main.java:280)
     at org.eclipse.core.launcher.Main.run(Main.java:977)
     at org.eclipse.core.launcher.Main.eclipse_main(Main.java:952)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.m7.installer.util.NitroxMain$1.run(NitroxMain.java:36)
     at java.awt.event.InvocationEvent.dispatch(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
Caused by: java.lang.NullPointerException
     at com.m7.wide.doceditor.XmlTagCommander$_A.actionPerformed(Unknown Source)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.AbstractButton.doClick(Unknown Source)
     at javax.swing.plaf.basic.BasicMenuItemUI.doClick(Unknown Source)
     at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at javax.swing.JComponent.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at com.m7.wide.eclipse.jstudio.Plugin$_A.A(Unknown Source)
     at com.m7.wide.eclipse.jstudio.Plugin$4.run(Unknown Source)
     at org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35)
     at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:123)
     ... 32 more
---END EXCEPTION---
Any ideas on how to fix this?
Thanks,
Avi.

Yes, there is a known issue using the latest update of 1.4.2 or 1.5.0 vm.
Generally, Workshop should work fine with 1.4.2 or 1.5.0 series. You can find the supported platform info at
http://edocs.bea.com/workshop/docs92/supportedplatforms33.html
FYI:
http://forums.bea.com/bea/thread.jspa?threadID=400001144&tstart=15&mod=1169490304818
http://forums.bea.com/bea/thread.jspa?threadID=400001987&tstart=0&mod=1172533558688

DPMS/Screen blanking not working in gnome-shell

The title pretty much sums it up. I've tried setting screen blanking in gnome-control-center->power, but it doesn't seem to work. However DPMS has worked in pretty much every other WM I've tried by default.
I've installed gnome-shell and gnome-control-center. Not using gdm.
I've tried 'xset -dpms' which apparently should've helped at least in earlier gnome releases, but it makes no difference on my system.
Any ideas what could be causing this?

\hbar wrote:
Could you be more specific so as to what does not work? Is it the automatic screen blanking, or just plain screen blanking? If you run
xset dpms force off
does the screen turn off?
I want my screen to turn off automatically when system is not in use, so I've enabled the automatic screen blanking from gnome settings.
That command turns my monitor off fine, but doesn't happen automatically when system is idle like it does in other WMs
\hbar wrote:Also 'xset -dpms' disables dpms, so I don't understand how that would help.
Apparently there's been an issue where xserver's dpms settings get in gnome's way, and disabling dpms with xset has helped some people in arch forums and others. Although if I'm not mistaken that issue should be fixed already.

PSE 7 Editor Not Working

My editor is not working. When I try to open, window comes up inside editor screen and says "Adobe Photoshop Editor has Stopped Working" This has never happened and the organizer is still working. Help someone!!!

The editor prefs often get corrupted. You may need to rebuild the editor preferences to resolve any conflicts.
Hold down the Ctrl+Shift+Alt keys and simultaneously click on the Edit button on the welcome screen. Release the three keys and look behind the welcome screen by closing it.
You should see a pop up box with the words: Delete Adobe Photoshop Elements Settings File?
Click on Yes
Close down Elements and re-open it in the normal way - then wait whilst it rebuilds the preferences.

Dropbox appindicator is not working in Gnome shell

Hello,
I have installed "dropbox" package from AUR and also "gnome-shell-extension-appindicator-git" (and it's dependencies which are libindicator and libappindicator and some other packages) from AUR too.
My appindicators are now working except for Dropbox and Skype. (but Skype is not my problem here)
The only relevant information that I have found about my issue is the link below but that does not seem to help too.
https://github.com/rgcjonas/gnome-shell … /issues/22
My problem is that Dropbox is still showing it's systray icon instead of it's appindicator.
Anyone has faced the same problem or would you have any ideas? I would appreciate your help.

\hbar wrote:
Could you be more specific so as to what does not work? Is it the automatic screen blanking, or just plain screen blanking? If you run
xset dpms force off
does the screen turn off?
I want my screen to turn off automatically when system is not in use, so I've enabled the automatic screen blanking from gnome settings.
That command turns my monitor off fine, but doesn't happen automatically when system is idle like it does in other WMs
\hbar wrote:Also 'xset -dpms' disables dpms, so I don't understand how that would help.
Apparently there's been an issue where xserver's dpms settings get in gnome's way, and disabling dpms with xset has helped some people in arch forums and others. Although if I'm not mistaken that issue should be fixed already.

In sapscript Graphical PC Editor not work, not save text

Hello Experts.
In SAPScripts the Graphical PC Editor does not work. Previously if it worked, now will not save or update the inserted text
Is there a note to fix it?
I'm Using:
- SAP GUI 7.20 patch level 5
- SAP ECC 6.0 Release 701
- Windows XP Office 2003
Thanks

Thank you very much.
This post really helped me. I solved it.
Thanks Ángel.
Regards.

ICE edit, in context editor not working?

I can't seem to activate the in context editor for the site newmovers.businesscatalyst.com. The 'Edit' button is there, and when I click it the link changes to /icecube but nothing else happens. I contacted BC's support team and was told "I suspect the reason why the edit button is not working is, you have custom code placed on the pages."
It works on my other sites, just not here.
Has anyone else had an issue like this? I wasn't aware everyone else was using non-custom code for their sites! Is it possible that I have some Javascript or other code that is disrupting?
Any help greatly appreciated!

After some back & forth, the BC support team was right that it was my code which was breaking the ICE:
I had two div's with the same id on my home page. Not sure why that broke the in context editor, but maybe this will help someone else out down the road.

Dconf-editor not working in gnome 3.

Similar Messages

Maybe you are looking for