DCs missing in SAP-JEE, SAP_BUILDT, SAP_JTECHS compartments in Track

Hi All,
I reimported the Updated version of Development configuration in NWDS.
After importing i found out that Standard SAP SCs SAP-JEE, SAP_BUILDT, SAP_JTECHS are empty and does not contain any Standard SAP Dcs.
Because of this all the custom Dcs in the particular Track are not building when i am Creating Projects from these DCs in NWDS.
I checked In the CBS WebUI that all the DCs are Broken because their meta data is Broken because of the missing DCs in the above mentioned SAP Standard SCs.
Please suggest how to resolve this issue and figure out the root cause of Problem.
Thanks & Regards,
Siddharth Jain

Hi Siddharth,
sometimes changes to the track definition on CMS will lead to the invalidation of the CBS buildspaces. In this case, check-in the required SCs SAP-JEE, SAP_BUILDT and SAP-JEE again into your track (using CMS Transport Studio, Check-In tab) and import them again into the DEV and the CONS stages of your track. This usually leads to a rebuild of your "own" DCs and -- maybe after leaving and starting the NW Developer Studio again -- should fill the CBS buildspaces. As a result you should see the DCs again in the NW Developer Studio.
Please note that the situation might be different if you have changed the SP stack level of your DEV / CONS system in the meantime. In this case you need to import the "correct" version of SAP-JEE, SAP_BUILDT and SAP_JTECHS and this different version may result in broken DCs during the build (if some public parts have changed in the meantime).
Best regards
Thomas

Similar Messages

SAP-JEE, SAP_BUILDT, and SAP_JTECHS and Dev Configuration questions

Hi experts,
I am configuring NWDI for our environment and have a few questions that I'm trying to get my arms around.
I've read we need to check-in SAP-JEE, SAP_BUILDT, and SAP_JTECHS as required components, but I'm confused on the whole check-in vs. import thing.
I placed the 3 files in the correct OS directory and checked them in via the check-in tab on CMS.   Next, the files show up in the import queue for the DEV tab. My questions are what do I do next?
1. Do I import them into DEV? If so, what is this actually doing? Is it importing into the actual runtime system (i.e. DEV checkbox and parameters as defined in the landscape configurator for this track)? Or is just importing the file into the DEV buildspace of NWDI system?
2. Same question goes for the Consolidation tab.    Do I import them in here as well?
3. Do I need to import them into the QA and Prod systems too? Or do I remove them from the queue?
Development Configuration questions ***
4. When I download the development configuration, I can select DEV or CON workspace. What is the difference? Does DEV point to the sandbox (or central development) runtime system and CONS points to the configuration runtime system as defined in the landscape configurator? Or is this the DEV an CON workspace/buildspace of the NWDI sytem.
5. Does the selection here dictate the starting point for the development? What is an example scenarios when I would choose DEV vs. CON?
6. I have heard about the concept of a maintenance track and a development track. What is the difference and how do they differ from a setup perspective?   When would a Developer pick one over the over?
Thanks for any advice
-Dave

Hi David,
"Check-In" makes SCA known to CMS, "import" will import the content of the SCAs into CBS/DTR.
1. Yes. For these three SCAs specifically (they only contain buildarchives, no sources, no deployarchives) the build archives are imported into the dev buildspace on CBS. If the SCAs contain deployarchives and you have a runtime system configured for the dev system then those deployarchives should get deployed onto the runtime system.
2. Have you seen /people/marion.schlotte/blog/2006/03/30/best-practices-for-nwdi-track-design-for-ongoing-development ? Sooner or later you will want to.
3. Should be answered indirectly.
4. Dev/Cons correspond to the Dev/Consolidation system in CMS. For each developed SC you have 2 systems with 2 workspaces in DTR for each (inactive/active)
5. You should use dev. I would only use cons for corrections if they can't be done in dev and transported. Note that you will get conflicts in DTR if you do parallel changes in dev and cons.
6. See link in No.2 ?
Regards,
Marc

SAP-JEE, SAP_JTECHS, SAP_BUILDT not present in Check-In Tab for import

Platform :J2ee server 6.40 SP19 , <b>NWDI 7.0</b> , XSS 100 SP 16.
While creation of ESS/MSS track only 3 SCA(ESS/MSS/PCUI) file shows up in the Check In Tab , all the 3(SAP-JEE, SAP_JTECHS, SAP_BUILDT) remaining SAP support file is not present.
All 6 File is present in cms/inbox folder.
What is the reason for the file not showing up in the check in tab? Please let me know , some has a solution to it.

Hi Akshata,
Let me add some more to your point, when you deploy these SCA file using SDM. The file system deployment will extract the contained Build Plugin SCAs into the directory /usr/sap/<instance name>/SYS/global/CMS_CBS/plugins. You can now copy the extracted files to the CMS Inbox.
If you directly copy these files to CMS/inbox then CMS wont recognize them, but once you deploy it,it does recognize them.
Regards,
Ameya
Message was edited by:
Ameya Pimpalgaonkar

Unable to find SAP_BUILDT, SAP_JTECHS, and SAP-JEE

Hi,
I am configuring NWDI for dev environment and in the process i have created a product, software component, reserved the namespace prefix, created a domain and while cretaing a track i am facing this prblm.
I have entered the general track data in the track data tab, added the software component which I have created and after that I got the SAP_BUILDT, SAP_JTECHS and SAP-JEE in the required component table.
After that how to add these systems to the development track in runtime systems tab and i added only the development runtime system and i left the other three.
After that to perform checkin and import the above software components SAP_BUILDT, SAP_JTRANS, SAP-JEE i did not find the directory CMS_CBS in the server path <drive>://usr/sap/<sid>/SYS/global.
Please tell how to find those software components
Thanks

Hi,
you can use the wizard to create a track and determine which kind of application you want to develope. The wizard will automatically select and import the correct components.
If you are working with CE 7.11 you can find the wizard in
NWA -> Configuration Management -> Scenarios -> Configuration Wizard
-> Change Management Service (CMS): Create an Application Skeleton
or
http://server:port/devinf --> Create an Application Skeleton
Best regards,
Kevin

JSPM Error with SAP-JEE component SP16

Hi
I am depolying a queue in JSPM SP16.1 for an ECC6 700 SR3 installed ABAP/Java system and it errors with the component SAP-JEE SP16 (installed level is SP14 as delivered in the SR3 kit)
The log has the messages:
Oct 8, 2008 1:49:57 PM Warning: Caught CVersProxyAccessException while saving repository: CVersAccessException: Cannot access CVers due to missing or incorrect configuration.
Additional error message is:
com.sap.sdm.apiint.serverext.servertype.TargetServiceException: Cannot provide connect data for database target system "CONFIG_DB".
Additional error message is:
com.sap.sdm.serverext.servertype.dbsc.DatabaseConnectException: Creation of DataSource for database "WFQ" failed. (com.sap.sql.log.OpenSQLException: Error while accessing secure store: Encryption or decryption is not possible because the full version of the SAP Java Crypto Toolkit was not found (iaik_jce.jar is required, iaik_jce_export.jar is not sufficient) or the JCE Jurisdiction Policy Files don't allow the use of the "PbeWithSHAAnd3_KeyTripleDES_CBC" algorithm..)
regards
Michael

Hi Philipp
My version is 700 and the database is DB2/400 for IBM System i.
The sapcrypto is treated differently on this platform, so I havent done anything with it as yet.
I logged a message with SAP which has gone to the BC-JAS-SEC queue and the reply I received is below. Please let me know if this has helped you as I have not had the chance to get back to the system to try these steps :
regards
Michael.
To do the further investigation, may I check info below with you:
- are you able to read the content of the
/sapbwtest/global/security/lib/tools/iaik_jce.jar file with jar
- do you have the full strength JCE files installed for this JDK?
See note: 739043
- What user is used to connect to the Database from the java side in
the secure store? check if the password is correct or the user
is unlocked.
Make sure the connection details in Secure Store are the correct ones
you can check it in the config tool:
the jdbc/pool/<SID>/Password and jdbc/pool/<SID>/User
Edited by: Michael Power on Oct 15, 2008 8:52 PM

Idoc "missing" between SAP and PI

Hi!
We have an issue with Idocs that are "missing" between SAP and PI. First 5 idocs were processed ok, then 3 went into yellow status. We have set up queue processing on this particular idoc type as there can be posted 2 at the same time. The problem started when 2 idocs were processed at the same time
What have been done
- SMQ1/2 in SAP system does not show any trace of these messages
- SMQ1/2 in PI system does not show any trace of the messages
- Message monitoring in PI does not show any trace of the messages
- SM58 in SAP system is empty
- SM58 in PI system is empty
What checks remain to find out where these Idocs are stuck?
Thanks!
regards Ole

Hi Ole,
Refer This link for IDOC Monitoring.
http://help.sap.com/saphelp_nw70/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
In this it is mentioned like
Main Tools
XI Runtime Workbench
Transactions:
u25CF     IDX1
u25CF     IDX5
u25CF     SXMB_MONI
u25CF     SM58
u25CF     SM21
using these we can monitor..
Thanks.

Dcs interface with sap pm

Dear experts,
can anyone explain me the basic steps and information regarding dcs interface with sap .
i want to do this sap implementation for the thermal power station. i want to generate notifications and work orders when the parameteres of particular equipment crosses its range.
how the important parameters from the dcs is linked with sap server. how i can get the data from dcs and pass it to the sap system.
can anyone give the helping hand.

Hi,
You can use XI as a connector instead of ALE to connect mySAP ERP to SAP Business One. The DI API is the connector for SAP Business One.
The DI API or Data Interface API is part of Business One and the Business One SDK. B1i exists to easily connect mySAP and SAP Business One without typical coding that would be required simply by using XI to connect with SAP Business One and mySAP. B1i contains all of the connections, pre-defined content, message handling and error correction for common business scenarios to connect these to systems. Without B1i, you have to hand code everything. If you are not connecting with SAP Business One, then you may not have a need or requirement to use B1i. There are more detailed whitepapers here from the SAP Business One main page on SDN. You should have a look at those.
You should have SAP Portal authorisation to access the following info. Go to sevicemarketplace -> smb -> SBO -> Install'n'Updates->Updates->Updates for SAP Business One->SAP Business One Releases prior to 2004->SBO-MYSAP INTEGRAT.TOOLKIT 1.5.
You can find there an presentation how to Integrate SBO with mySAP via XI (https://websmp203.sap-ag.de/~sapidb/011000358700002285912003E.ppt)
Thanks
Swarup

Financial Accountig missing in SAP Customizing Implementation Guide

Hi
After upgrading SAP ERP 2004 to SP-Stack 17, the entry "Financial Accounting" is missing in SAP Customizing Implementation Guide (Transaction SPRO).
Any ideas?
Thanks
Andreas

The problem was solved. See Note 922552.

Excel x86 2013 status bar missing in SAP

Hello,
We are using SAP GUI 7.3 patch 7 and Office Excel 2013. With this combination, the bottom status bar in Excel does not display. I tried to apply some corrections, but I do not successful.
My problem is similar to that: Excel 2010 status bar missing in SAP
Anyone can help me?
Thank you for everything.

Hello Douglas,
I checked this with the standard demo program
SAPRDEMO_SPREADSHEET_INTERFACE and unfortunately this is a limitation of the SAP inplace
mode.
This issue can be replicated outside of SAP by using the FramerEx application by Microsoft which
can be downloaded for free.
You can download this from here:
http://download.microsoft.com/download/vc60pro/mdi/1/win98me/en-us/framerex.exe
If you use this program and use the File -> Open and select any valid .xls file,it will open in the same manner as the inplace mode in SAP
You will notice the status bar is missing in this case too.
This is the same technology that SAP use to display the inplace files.
Best regards,
Jude

How can i interface bet. plc,scda,dcs,cnc with sap

hi
i have a requirement
is it possibile interface bet. plc,scda,dcs,cnc with sap
my client is a power,manfcg industry
they want direct coversion
not through import and export to excel sheet.
thanks
manoj

hi
kindly refer the link for interface in PM part
http://help.sap.com/erp2005_ehp_03/helpdata/EN/af/cb5413461411d189f20000e81ddfac/frameset.htm
http://help.sap.com/erp2005_ehp_03/helpdata/EN/af/cb53f9461411d189f20000e81ddfac/frameset.htm
regards
thyagarajan

Can't import JEE, JTECHS, BUILDT into DI track

Hi all:
We are implementing ESS enhancement. We need to import JEE, JTECHS, BUILDT into the track. but the track can't recognize the SCA files in the folder. Our DI is 7.0 and the SCAs are 6.40. Anyone knows why? Please help me!

Hi,
If you are using DI 7 then why are you using SCA 6.40? you should get SCA 7, you need to bring all the components on the same level to let everything work smoothly, i think this is the main reason that DI is not able to recognise them, you can easily get SCA 7 on https://service.sap.com,
And yes i am asking you first to deploy those SCAs from SDM, it is necessary.
Regards,
Ameya
Message was edited by:
Ameya Pimpalgaonkar

How to import com.sap.isa.backend.crm.webcatalog.pricing track to NWDS

Hi all,
I am working on B2B webshop product catalog pricing and I have to make some changes in Java classes which are supposed to be in com\sap\isa\backend\crm\webcatalog\pricing..........But i am trying to import them in NWDI perspective and I dont find this
com.sap.isa.backend.crm.webcatalog.pricing track at all...
Does any one know how can I import this track and where it is.... all associated Java Classes in this track to my NWDS?
Regards,
Sam

Hi Shantoo,
Thanks for helping me with this. So you mean to say, I have to import crmhomeshrextsap.com ??
If that is the case, I already imported but i am unable to find this track com.sap.isa.backend.crm.webcatalog.pricing .
If you could access this track could you please let me know the name of one Java Class atleast that is present in this track?
Also I can only find the custom Z classes that I have written in crmhomeshrextsap.com , but some how not the standard SAP classes.
If i say ctrlshiftT, i can search for standard classes and open them, but if i click in "Link with Editor", I cant find the source of the class....but "Link with Editor" still works for my custom classes.
Any help with this will be higly appreciated. Will be waiting for your response. Thanks.
Jessica.

I've recently purchased an album, but it has not fully download.there is two songs missing. How can I download these two tracks? Please.

I've recently purchased an album, but it has not fully download.there is two songs missing. How can I download these two tracks? Please.

iTunes Store > Purchased > Music > Not on this computer.
tt2

Qestion about the requred dcs SAP_BUILDT SAP-JEE SAP_JTECHS

hi all,
I use nwdi to transport and deploy my web dynpro projects.
the nwdi is 2004s (7.00), but the dev system and production system are 2004 (6.40)
which version of these required DCs should I use: 6.40 or 7.00?
Thanks!
Regards,
Hui

Hi,
It is recommended to keep NWDI always on the highest SP level. But it is also possible to have an NW 04 JDI for NW2004s developments inside the tracks.
For more details refer,
/people/marion.schlotte/blog/2005/10/25/jdi-software-vs-jdi-content
Regards,
Srinivasan T

Crystal Designer option missing in SAP B1

Hi
I have re-installed Crystal 2008 and SAP Crystal add on in my PC, Now I donu2019t see the Crystal designer tab option available which I had before. I followed the same steps which I have done before. I have .net framework 3.5. Not sure what I have missed to get this tab. any idea?
Mohan

Go to add remove program > click change/modify for the integration kit and kae sure to add "SAP tool bar".
hope this help.
Regards,
Adil

DCs missing in SAP-JEE, SAP_BUILDT, SAP_JTECHS compartments in Track

Similar Messages

Maybe you are looking for