DCS system configuration information monitoring registry does not generate reports
Hi I try to monitor the registy with a user defined data collector set.
I created the system configuration DCS and started it. Afterwards I installed adobe acrobat reader. After stopping the DCS no report showed up (red arrow). What is the reason for this behaviour?
Hi Arno N,
Would you please let me know OS edition information of the server (or client computer?) where created the Data
Collector Set? Was it Windows Server 2008 R2 or any other?
On current situation, please refer to following KB and check if the Hotfix will help you.
Performance Monitor data collector set does not collect
all required performance counter data in Windows 7 or in Windows Server 2008 R2
If this issue still exists, would you please let me know how you configured “Run as” option when create
the Data Collector Set? Did Run as an administrator account or just
Run as Default?
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Similar Messages
-
Managed System Configuration ! The table does not contain any data !
Hi,
In Sol Man Setup , Managed System Configuration, in phase 6 - Create Logical Componets -
There is no Product Version and Product Instance Available.
The message is : " The table does not contain any data "
How can correct this problem ?
ThanksHi,
while creating new Logical Component via SMSY , you need to specify Product first.
e.g. if you managed system is ERP 6.0 , select Product as SAP ERP
once you select Product , it automatically fetches information for product Version and Main Instance depending upon Product field input.
Please check and let us know if issue still persits.
Thanks,
Rupali -
Large Number of Multi-Select Parameter Values does not generate Report
I have a SSRS Report that requires 4 multi-select parameters.
The report is deployed on a SharePoint website with SSRS integration.
I calculated, if the user selects 'Select All' for one specific customer, there could be at most 2700 possible parameter values among the 4 parameters.
In some cases, when a user selects 'Select All' and clicks Apply, nothing happens. No icon showing Processing Report.
If a user selects 'Select All' and the total number parameter values are under 500 for a specific customer, there is an icon showing Processing Report.
I followed the instructions at:
http://social.msdn.microsoft.com/Forums/en-US/b02ccb5d-6019-4d63-bd6c-8baff24fffd8/sql-server-limit-on-the-number-of-multivalue-parameter-selections?forum=sqlreportingservices
That did not help.
Thanks in advance.Install the latest update of SQL Server :
2008 SP2 : http://www.microsoft.com/en-us/download/details.aspx?id=12548
2008 R2 SP2 : http://www.microsoft.com/en-us/download/details.aspx?id=30437
2012 SP1 : http://www.microsoft.com/en-us/download/details.aspx?id=35579 -
I connect my macbook pro to an Epson wireless projector. The macbook can see the projector wirelessly and the image on the macbook is displayed on the projector. However on system ref., the arrangement tab does not show and thus cannot have multiple view.
I am trying to project Pro Presenter on the Epson projector such that I have the detail screen on the macbook and only the screen I want people to see on the projector display. This has not been possible because the arrangement tab on the Display section of the System Preference is not showing. If i tried to search for the arangement, it comes back with the message that there is not other source detected, hence the arrangement tab is not showing.
I have also tried to connect the Epson directly to the Macbook but it still the same result, so its not because it is a wireless connection. Can someone advise me jhow to go around this problem. I have used windows before and it is very easy to extend ptojection on windows, but this system seems to be frustrating to me.
Thanks,
ToksHi Toksyb!
You may want to try clearing out the PRAM on your computer. This process is explained through this article:
About NVRAM and PRAM
http://support.apple.com/kb/ht1379
Thanks for using the Apple Support Communities!
Cheers,
Braden -
"package java.xml.registry does not exist" error in NetBeans
Hi all
I'm using netbeans for developing webservices and and have to use JAXR. I have downloaded and installed jwsdp1.5.
When I view the source code for the JAXR sample java files that accompany the java EE tutorial in the NetBeans IDE Source Editor, I get the error : package java.xml.registry does not exist.
However, the release note for NetBeans says that it supports JAXR.
Also, when I compile and run the same files using DOS and the ant command, the files work.
Can someone please tell me what to do and how to work on JAXR clients in NetBeans because the Help files don't have any documentation on it nor does the NeBeans Field Guide?Do you have the jaxrpc-api.jar and jaxprc-ri.jar in your classpath?
They are in <wspack1.1 installation>/jaxrpc-1.0.2/lib
Regards,
Bhakti -
System font ZOCRB10 120 Bold does not exist
Hi all expert,
Our basis has been uploaded the Font file with the Font name 'ZOCRB10', and replaced the Font name 'OCRB1' with
'ZOCRB10' in the SAP script, but when I update the form 'Z9INVOICEFR' with the new font 'ZOCRB10', it still does't have
the bold font.
It appears the error 'System font ZOCRB10 120 Bold does not exist' ,
How to resolve the issue ?
Thanks & Best Regards,
Michael
Edited by: Michael Hong on Aug 25, 2010 2:51 PMHi, did you read Note 606923 - FAQ: SAPscript/Smart Form: Fonts?
Maybe the note could help you
Regards,
Fabrizio -
everytime i try to download it says i need to contact system administrator but i am on system administrator but it still does not download
I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
Identifying iPod models
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318. -
How can I speed up the "start speaking" feature in iBooks? (System Preferences Dictation and speech does not do anything to the speech speed.) The rate is a bit to slow.
Hi, I had the same problem you described, and I noticed that there are two ways of activating text to speech on iBook for Mac, with different speed results (at least on my MacBook Pro Retina display)
On your iBook you can select the text and and then click on > More> Start speaking, and you will get a certain speed, which tends to be too slow.
But you will get the speed you had selected with "Go to System Preferences>Dictation and Speech>Text to speech. In there is a slider to adjust the speaking rate." if you use the TOP MENU (next to the black apple) under Edit>Speech>Start Speaking. I also learned that under System Preferences>Dictation and Speech>Text to speech, there is an option for a shortcut which is very helpful. And you can change Key. Hope this was helpful. -
Hello!
I want to do shedule backup. According to user guide:
You can create a scheduled backup only for the primary instance. To create, duplicate, or edit a scheduled
backup:
Step 1 Choose System Administration > Operations > Scheduled Backups.
But System Administration > Operations > Scheduled Backups does not appear in ACS 5.0.0.21.
How can i do backup ?Hi Alexander,
Could you please confirm on which link you found these instructions?
It looks like these are the instructions from the ACS 5.1 user guide, but on ACS 5.0 we don't have a similar option.
Regards,
Fede
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it. -
I cannot run Eclipse or Aptana any more because I get the following error
The JVM shared library "/System/Library/Frameworks/JavaVM.framework"
does not contain the JNI_CreateJavaVM symbol.
I already tired to reinstall Java from the oracle website but it does not help.By everything, did you mean eclipse and java?
-
System of newly started session does not allow scripting.therefore the sess
Hi,
i am getting an error when i am running the Test script using ECATT is "system of newly started session does not allow scripting.therefore the session cannot be recorded" for recording a transaction
Please let me know the solution asap if you are aware of it.
regards
vishnu>
vishnukvv wrote:
> Hi,
>
> How can i check that whether particular client and front end is allowing ECATT and Scripting in my system.Please answer ,if you know.
>
> regards
> vishnu
Hi Vishnu,
1)Go to RZ11.
Enter Profile name aas SAPGUI/USER_SCRIPTING and the default value should be true.
Current Value should be set to true. -
This needs to be done by BASIS admin team.
2)Request System Admin team to allow eCATT and CATT allowed in this system.
3)In the SAPGUI front end at the menu,you have options to enable scripting.
The first two steps will be done by Basis team and the step(3) can be set by you.
Regards,
SSN. -
Configure XQuery Transformation dialog does not show mfl file
I have created a valid mfl file. I would like to use this file as an input type.
I have copied the file into the schema directory, however the Configure XQuery
Transformation dialog does not show the file.
All help highly appreciated.
Regards
DoshiHi ..
Might be corrupted Finder preferences.
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Preferences/com.apple.finder.plist
Click Go then move the com.apple.finder.plist file to the Trash.
Restart your Mac. -
System recognizes external drive but does not eject disk
I connected external DVD drive to imac and clicked on 'Eject Remote Disk' from File. Nothing happened.
System recognizes external drive but does not eject disk. What should I do next?
<Re-Titled By Host>Run this command this in the Terminal app:
drutil eject -drive external -
Hi I have a Mac Book and I am trying to turn on my icloud. However when I go to system preferences the icloud icon does not appear anywhere. Where can I find it
it's not under "internet and wireless" in system preferences?
-
Mailing the Report Output-Does not generating file name
Dear Gurus,
The below program fulfils the "mailing the report" requirement .it sends the out put as an attachment in XLS format.But one problem exists i.e.,it does not generate filename.It gives the filename as ".XLS"(DOT XLS).
What should be done that system generates a filename?
*& Report ZTESTMAIL *
REPORT ZTESTMAIL .
tables: ekko.
parameters: p_email type somlreci1-receiver.
types: begin of t_ekpo,
ebeln type ekpo-ebeln,
ebelp type ekpo-ebelp,
aedat type ekpo-aedat,
matnr type ekpo-matnr,
end of t_ekpo.
data: it_ekpo type standard table of t_ekpo initial size 0,
wa_ekpo type t_ekpo.
types: begin of t_charekpo,
ebeln(10) type c,
ebelp(5) type c,
aedat(8) type c,
matnr(18) type c,
end of t_charekpo.
data: wa_charekpo type t_charekpo.
data: it_message type standard table of solisti1 initial size 0
with header line.
data: it_attach type standard table of solisti1 initial size 0
with header line.
data: t_packing_list like sopcklsti1 occurs 0 with header line,
t_contents like solisti1 occurs 0 with header line,
t_receivers like somlreci1 occurs 0 with header line,
t_attachment like solisti1 occurs 0 with header line,
t_object_header like solisti1 occurs 0 with header line,
w_cnt type i,
w_sent_all(1) type c,
w_doc_data like sodocchgi1,
gd_error type sy-subrc,
gd_reciever type sy-subrc.
t_object_header = 'Text.xls'. append t_object_header.
*START_OF_SELECTION
start-of-selection.
Retrieve sample data from table ekpo
perform data_retrieval.
Populate table with detaisl to be entered into .xls file
perform build_xls_data_table.
*END-OF-SELECTION
end-of-selection.
Populate message body text
perform populate_email_message_body.
Send file by email as .xls speadsheet
perform send_file_as_email_attachment
tables it_message
it_attach
using p_email
'Example .xls documnet attachment'
'XLS'
'PO'
changing gd_error
gd_reciever.
Instructs mail send program for SAPCONNECT to send email(rsconn01)
perform initiate_mail_execute_program.
*& Form DATA_RETRIEVAL
Retrieve data form EKPO table and populate itab it_ekko
form data_retrieval.
select ebeln ebelp aedat matnr
up to 10 rows
from ekpo
into table it_ekpo.
endform. " DATA_RETRIEVAL
*& Form BUILD_XLS_DATA_TABLE
Build data table for .xls document
form build_xls_data_table.
*CONSTANTS: con_cret TYPE x VALUE '0D', "OK for non Unicode
*con_tab TYPE x VALUE '09'. "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
constants:
con_tab type c value cl_abap_char_utilities=>horizontal_tab,
con_cret type c value cl_abap_char_utilities=>cr_lf.
concatenate 'EBELN' 'EBELP' 'AEDAT' 'MATNR'
into it_attach separated by con_tab.
concatenate con_cret it_attach into it_attach.
append it_attach.
loop at it_ekpo into wa_charekpo.
concatenate wa_charekpo-ebeln wa_charekpo-ebelp
wa_charekpo-aedat wa_charekpo-matnr
into it_attach separated by con_tab.
concatenate con_cret it_attach into it_attach.
append it_attach.
endloop.
endform. " BUILD_XLS_DATA_TABLE
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
form send_file_as_email_attachment tables pit_message
pit_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
data: ld_error type sy-subrc,
ld_reciever type sy-subrc,
ld_mtitle like sodocchgi1-obj_descr,
ld_email like somlreci1-receiver,
ld_format type so_obj_tp ,
ld_attdescription type so_obj_nam ,
ld_attfilename type so_obj_des ,
ld_sender_address like soextreci1-receiver,
ld_sender_address_type like soextreci1-adr_typ,
ld_receiver like sy-subrc.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
clear w_doc_data.
read table it_attach index w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + strlen( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
clear t_attachment.
refresh t_attachment.
t_attachment[] = pit_attach[].
Describe the body of the message
clear t_packing_list.
refresh t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
describe table it_message lines t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
append t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
describe table t_attachment lines t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
append t_packing_list.
Add the recipients email address
clear t_receivers.
refresh t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
append t_receivers.
call function 'SO_DOCUMENT_SEND_API1'
exporting
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
importing
sent_to_all = w_sent_all
tables
object_header = t_object_header
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
exceptions
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
loop at t_receivers.
ld_receiver = t_receivers-retrn_code.
endloop.
endform.
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
Instructs mail send program for SAPCONNECT to send email.
form initiate_mail_execute_program.
wait up to 2 seconds.
submit rsconn01 with mode = 'INT'
with output = 'X'
and return.
endform. " INITIATE_MAIL_EXECUTE_PROGRAM
*& Form POPULATE_EMAIL_MESSAGE_BODY
Populate message body text
form populate_email_message_body.
refresh it_message.
it_message = 'Please find attached a list test ekpo records'.
append it_message.
endform. " POPULATE_EMAIL_MESSAGE_BODY
Your suggestions will be appreciated and rewarded.
Thanks in advance
MuraliHi
Your pgm is not passing anything in obj_descr in packing list for excel file. If you pass a name your excel file will have that.
Regards
Sathar
perform send_file_as_email_attachment
tables it_message
it_attach
using p_email
'Example .xls documnet attachment'
'XLS'
'PO'
' ' *------> no value*
changing gd_error
gd_reciever.
form send_file_as_email_attachment tables pit_message
pit_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription *----> no value*
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
t_packing_list-obj_descr = ld_attdescription.
Maybe you are looking for
-
System Hangs when playing games -K8N Neo4 - SLI Plat
Hi, This is my first post..........so bear with me. I've just completed my sons new computer, all was fine until he started to play games!!!. The system is, Floopy = Mitsumi DVDR = LG CDR = LG Memory = 2 sticks of Samsung 512 PC3200 DDR400 Graphic
-
Delivery Tracking in the Shipment Document
Hi All, I am configuring a shipment Document in which I need a help to understand where can we configure Delivery Tracking in IMG for that to appear in the Shipment Document? It would be really appreciable for the Correct answers Thanks and Regards M
-
Since installing Microsoft two step verification on my Outlook Account via my PC (Acer) I am unable to send emails on my iPad. I can neither remove two step verification or find a way to solve this. I would prefer to keep this email account as my pri
-
How do I save a document from my email to my computer. I have no "save as" option.
I want to be able to save an email from my inbox to my computer. Can find a "save as" button or get a copy and paste to work. When I try to "save the page" it saves the web page not the email. .
-
HT201436 How can I listen to a voice mail more than once?
How can I likten to a voice mail more than once?