DD Activation Error when installing DaRT via note 99914 SAP3.1I

Hello Experts,
We are trying to install DaRT (Data Retention Tool) on SAP 3.1I. When trying to implement note 99914 we get the following error:
Stopping on on Error 12 during DD Activation
tp finished with return code: 210

We don't know what this means in the context of installing DaRT and would appreciate some advice on troubleshooting.
Thanks

Similar Messages

Error when installing SP2: "Can not access specified drive..."

Hi Tim,
I had a BOE 3.1 installed on windows server 2003, however the installation was made from an external drive. When I tried to install SP2, it took a long time and the end it sent an error message about "could not find the drive E". Do you know why it depends on the drive where the installation files for BOE were?
Thanks, regards,
Sandra.

creating new thread for this post to increase response.
I'm not aware of SP2 having issues with E: is it a physical drive in the server or NAS/SAN/other?
Regards,
Tim

Windows 7 error when installing iTunes 'Could not access network location %APPDATA%'

This error message pops up everytime i try to install iTunes on my PC. I am trying to run the 64-bit version and have also tried fixit application, bu the problem persists. How can I solve this error message?

Try disabling anti virus software and turning off the Firewall
Disable antivirus software
Turn-Windows-Firewall-on-or-off

TS3212 I get an apple application support error when installing itunes. It says uninstall and re-install. Does not work. same message. What is a solution?

I get an apple application support error when installing itunes. It says uninstall and re-install. Does not work. same message. What is a solution?

Is that an error 2 message?
If so, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Activity log for bug 278860: confusing "profile in use"/"already running" error when profile is missing (not found) did anyone find a fix for this? Thanks, Edie

bug 278860: confusing "profile in use"/"already running" error when profile is missing (not found)
Apparently the profile .default is missing. Therefore the bug 278860 is activated and I can't start Firefox. Is there a solution?

I did some googling and found alot of topics from you on this issue, to me it simply seems like on of the connectors is broken or loose.

DSO Activation Error - While Installing BI Content

HI Friend,
    First, I deleted one sap source systems for BW1 ( My bw1 server BI is : BW1CLNT100 ), later ,I create the same sap source system, But active 0FIAP_O03 ods,
had error:
DataSource 80FIAP_O03 does not exist in source system BW1CLNT100 of version A
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object 0FIAP_O03
I go to BW1CLNT100 datasoucres ,I not finded 80FIAP_O03 datasoucre, But I goto bw prd BI datasoucre, I found   80FIAP_O03 datasoucre.
I think loss 80FIAP_O03 datasoucre for BW1CLNT100 source system, because I am't delete Roules on the 0FIAP_O03 infosoucre for delete sap soucre systems.
DSO Activation Error - While Installing BI Content
this problem no issue, So I create new thread.
Now, How could me create or load 80FIAP_O03 datasoucre for BW1CLNT100 source system?
Now, I Replicate Datascoure for BW1CLNT100 source system, Delete old datasocure....... I go home, I will try tomorrow .

Hello,
You should generate the export data source for 0FIAP_O03 again, if there is still a problem please goto
RSA1 > SOURCE SYSTEMS > and right click on the relevant source system, find the datamart application component and
right click on this to replicate the datasource.
Best Regards,
Des

Errors when installing Photoshop CS6

Errors when installing Photoshop CS6

I am having a similar issue trying to download PS via CC.
Mac OSX
Here are the details from the installation error:
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR: DS001 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 13 error(s)
----------- Payload: Camera Profiles Installer 7.0.0.0 {539AEF15-3A2B-4A31-A587-7E90F7D9C700} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobeCameraRawProfile7.0All/AdobeCameraRawProfile7.0All.dmg. Please verify that the disk image is not corrupt.
----------- Payload: Adobe Player for Embedding 3.3 3.3.0.0 {2591B843-8028-4395-9DEE-03AF8D631539} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobeAPE3.3-mul/AdobeAPE3.3-mul.dmg. Please verify that the disk image is not corrupt.
----------- Payload: PDF Settings CS5 10.0.0.0 {84901376-1C55-4BD3-AD2C-F9BDB4449DAC} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobePDFSettings10-mul/AdobePDFSettings10-mul.dmg. Please verify that the disk image is not corrupt.
----------- Payload: Adobe SwitchBoard 2.0 2.0.0.0 {4FFA83C0-007A-4DB3-955C-B5EEE73BEDAF} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/SwitchBoard2.0All/SwitchBoard2.0All.dmg. Please verify that the disk image is not corrupt.
----------- Payload: AdobeCMaps CS6 4.0.0.0 {E8B1DAAA-0B6B-44E6-A2D3-8E418EA0EA85} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobeCMaps4-mul/AdobeCMaps4-mul.dmg. Please verify that the disk image is not corrupt.
----------- Payload: Suite Shared Configuration CS6 3.0.0.0 {0256558F-A0FF-4FCF-99C2-96D2EE3201D9} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobeSuiteSharedConfiguration3-mul/AdobeSuiteSharedConfiguration3-mul.dmg. Please verify that the disk image is not corrupt.
----------- Payload: Adobe Utilities CS6 4.0.0.0 {4F427880-01EA-4E0F-AAE2-9ADE97563A21} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobeUtilities4.0-mul/AdobeUtilities4.0-mul.dmg. Please verify that the disk image is not corrupt.
----------- Payload: Adobe XMP Panels 4.0.0.0 {148542D8-49CA-482A-A334-1D54C5A9D53B} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobeXMPPanelsAll/AdobeXMPPanelsAll.dmg. Please verify that the disk image is not corrupt.
----------- Payload: AdobePDFL CS6 10.9.0.0 {557F9FD3-EED8-43D7-AF29-0F19CA832728} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobePDFL10.9-mul/AdobePDFL10.9-mul.dmg. Please verify that the disk image is not corrupt.
----------- Payload: AdobeTypeSupport CS6 11.0.0.0 {A0F72081-99FB-4FFA-AE1A-62B5A656CAC1} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobeTypeSupport11-mul/AdobeTypeSupport11-mul.dmg. Please verify that the disk image is not corrupt.
----------- Payload: Photoshop Camera Raw 7 7.0.0.0 {CFC3110A-491C-4DBF-A97D-66C567600A2F} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobeCameraRaw7.0All/AdobeCameraRaw7.0All.dmg. Please verify that the disk image is not corrupt.
----------- Payload: Adobe Photoshop CS6 Support 13.0.0.0 {1F955A4A-F365-4379-AEE2-B7C83E1AA883} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobePhotoshop13-Support/AdobePhotoshop13-Support.dmg. Please verify that the disk image is not corrupt.
----------- Payload: Adobe Photoshop CS6 Driver 13.0.0.0 {74EB3499-8B95-4B5C-96EB-7B342F3FD0C6} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobePhotoshop13-Driver/AdobePhotoshop13-Driver.dmg. Please verify that the disk image is not corrupt.

Error when Installing Business Content BW 3.5

Hello Everyone,
When I "Drag n Drop" the infocube 0PS_C021, it shows following errors :
Object 0EMPLOYEE_EDUCATION (InfoSource,ISTD) could not be collected for object PA-PA-IO (Application,APCO)
Message no. RSO296
Diagnosis
You have collected objects in the BW Metadata Repository. Associated objects for the object PA-PA-IO of type Application,APCO have also been collected. Object 0EMPLOYEE_EDUCATION of type InfoSource,ISTD was among these objects. This object 0EMPLOYEE_EDUCATION of type InfoSource,ISTD, is not, however, available in the Metadata Repository.
Object '0EMPLOYEE_EDUCATION' (ISTD) of type 'InfoSource' is not available in version 'D'
Message no. RSO252
Diagnosis
You wanted to generate an object with the name '0EMPLOYEE_EDUCATION' (in transport request ISTD) of type 'InfoSource' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version D. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
Please help me to solve these problems.
Regards
Sanjiv

Hi Sanjiv,
Check the below thread:
Error when Installing Business Content BW 3.5
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/fbabd936493ee7e10000000a1553f7/content.htm
Reg
Pra

Red errors when installing 0ABC_CLASS

Get many red errors when installing 0ABC_CLASS, one red error is "Table /BI0/OTABC_CLASS could not be activated"
Note: 0ABC_CLASS does not contain any attribute, that means we don't have to find other InfoObjects which are attributes of 0ABC_CLASS to install to get rid of these red errors when installing 0ABC_CLASS.
It's activated in a just installed BW 3.5, could it be any patch reason or some other reasons?
Everyone's input is welcome!

hey Eugene,
Under SM21, these are system logs for today:
Failed to write to file, error 0028
> File: /usr/sap/QDW/DVEBMGS00/data/stat
Perform rollback
Run-time error "LOAD_PROGRAM_NOT_FOUND" occurred
Database error -289 at EXE
> SQL0289N Unable to allocate new pages in table space
> "QDW#STABD". SQLSTATE=57011 row=1
> Include RSCOLL00 line 0534.
Run-time error "DBIF_DSQL2_SQL_ERROR" occurred
> Short dump "051107 070016 qd1sbwdb DDIC " generated
Transaction Canceled 00 671 ( LOAD_PROGRAM_NOT_FOUND 20051107070016qd1sbwdb DDIC 0001 )
Perform rollback
Database error -289 at EXE
> SQL0289N Unable to allocate new pages in table space
> "QDW#STABD". SQLSTATE=57011
Database error -289 at EXE
Database error -289 at EXE
> SQL0289N Unable to allocate new pages in table space
> "QDW#STABD". SQLSTATE=57011
Database error -289 at EXE
Failed to write to file, error 0028
> File: /usr/sap/QDW/DVEBMGS00/data/stat
Perform rollback
Run-time error "LOAD_PROGRAM_NOT_FOUND" occurred
Database error -289 at EXE
> SQL0289N Unable to allocate new pages in table space
> "QDW#STABD". SQLSTATE=57011 row=1
> Include RSCOLL00 line 0534.
Run-time error "DBIF_DSQL2_SQL_ERROR" occurred
> Short dump "051107 080013 qd1sbwdb DDIC " generated
Transaction Canceled 00 671 ( LOAD_PROGRAM_NOT_FOUND 20051107080013qd1sbwdb DDIC 0001 )
Perform rollback

Update Operation Fatal Error when installing Technical Preview Build 10041 Upgrade

I posted this in the Microsoft Community forums and was redirected here.
Below is the original post (URL: http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/update-operation-fatal-error-when-installing/6eaff1b9-0223-4357-afc8-884382590e82 )
Hello,
In trying to perform an upgrade install of the Windows 10 Technical Preview Build 10041 (as is the latest available for direct download as of my writing), I am running into a problem I cannot find mention of anywhere else on the web.
I fall into two categories with regards to this build: A) Product tester who actually needs to test application performance under Windows 10 on bare metal, B) Semi-crazy techie who loves using (usable) beta software as his primary environment ;)
so it is rather important to me that I get this working on my machine in some non-virtualized respect. I am reluctant to do a full/fresh install if installation problems are happening, because my Windows 8 product key has been f***ed up from the
start (likely some random database corruption) and I've had to utilize phone support to get around an "unknown error" the last two times I've had to use it. So, for fear of that key completely crapping out on me, I don't want to move to Win10 unless
I'm confident it will install and I can stick with it (for better or worse) through the end. Problems within the Preview after I install it I can deal with.
So, I first tried to install the Preview through the standard Windows Update method. The installer took about 7 hours (but from reading lots of internet discussions, stupidly long install times in that range seem to be a common problem with
this builds separate from it actually failing). During the reboot between the "Setting up Devices" (Or is it Setting up Drivers? I forget) and "Taking Care of a Few More Things" (Again, possibly paraphrased), for about a split second, underneath
the Windows logo and throbber, some error like this appeared:
Fatal Error Performing Update Operation # of ##: ERROR CODE
It only appeared for a fraction of a second, and I had no chance of reading the precise numbers or error.
However, the installer then seemed to continue, and went until the main circle was at 100%. As soon as 100% hit, however, the screen went black for something like 30min. Then, I briefly saw "Attempting to recover installation" before "Restoring
your previous version of Windows." And I was, quite impressively considering how far along that installer was, back in Windows 8.1 completely unharmed.
I tried again by burning an ISO and doing a disc upgrade install. I let that one run overnight and was asleep for the error, but I was back in Win8.1 in the morning, so I can only assume a similar thing happened there.
As for my system specs, I'm running on a MacBook Pro 9,1 under Boot Camp. I am upgrading from Windows 8.1.2 Pro with Media Center. I have found other online accounts of people quite successfully installing Windows 10 on Macs, so that isn't the issue.
Does anyone have any clue as to what this error might have been/be, and how I might fix it? Or at least have it on good authority that a fresh installation would be unaffected (meaning it's software-related)? If not, I can try installing to a VHD,
which would at least let me product test on bare metal, but wouldn't have the harddrive space to be my daily driver and would probably only get used occasionally.
Thanks in advance to anyone who can help!
So far, I have the yet-to-be-tried idea of a clean boot prior to installation.
If anyone here has any more specific ideas, lemme hear 'em.
Thanks!

To the individual who proposed this as an answer to my problem: It's not even applicable. I specifically stated that I was trying to avoid doing a clean installation (at least without knowing more about the problem at hand). An answer saying to do the thing
you're trying to avoid doing is not an answer. You can see my last reply for the current status of this issue. 6-8 hour blocks of time in which I can't use my computer (as is required to install build 10041) aren't super common for me, but I haven't abandoned
this thread. There have simply been no more updates. If your motivation as a mod was that you simply don't like there being unanswered threads on this forum, then perhaps you could attempt to contribute rather than arbitrarily marking the first reply as an
answer.
I will continue to update this thread as I try new things and get more information.
Thank you.

Errors when installing Oracle Client 10.2.0.2.0 on zLinux (Red Hat)

I am receiving errors when installing Oracle Client 10.2.0.2.0 (Administrator) on zLinux. During the install I receive two notifications for File Not Found when the installer tries to create the link for lib32/libclntsh.so.10.1. I hit ignore on the pop-ups and the install completes. The Oracle Net Configuration Assistant then fails to launch with the following error:
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Command = /opt/oracle/product/10.2.0/db_1/bin/netca /orahome /opt/oracle/product/10.2.0/db_1 /orahnam Oracle_home /instype custom /inscomp client,oraclenet,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /opt/oracle/product/10.2.0/db_1/network/install/netca_clt.rsp
UnsatisfiedLinkError exception loading native library: njni10
Configuration assistant "Oracle Net Configuration Assistant" failed
The "/opt/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
I have seen multiple threads relating to very similar errors, but none of the fixes that were suggested have worked. I have double checked the required Red Hat packages and made sure they were all installed on the server. All of the prerequisite checks for the installer are successful. Any assistance would be of most helpful!

Worked with my Linux system admin and figured out that we were indeed missing some packages. There are 390 and 390x rpm's for Red Hat on System Z, i.e. 64 bit and 32 bit versions. Since we are running a 64 bit os some of those 32 bit packages did not get installed. Since our roles are split up, I am kind of blind as to the OS setup so I was not able to catch the problem. It is truly puzzling as to why Oracle would need 32 bit packages even though Oracle client is 64 bit. Regardless, after adding the 32 bit rpm's the installer was able to perform the linking operation that was failing, and the network configuration script ran successfully.

Getting an "installer failed to initialize" error when installing CS5 from CD

Getting an "installer failed to initialize" error when installing CS5 from CD
Mac OS X Version 10.7.5

Try using the Adobe Creative Suite Cleaner Tool
helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
http://www.adobe.com/support/contact/cscleanertool.html
If you continue to have problems getting the CD installation to work you can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site or else the download will not work properly.
CS5:
http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

Error when sending message: 404 not found

Hi,
New to XI, practicing file to jdbc scenario. File is pickedup from the source folder but nothing appearing on the receiver end ms access database.
In the Component Monitoring, tried sending message manually with all the right info in Integration engine, getting an error message saying:
"Error when sending message : 404 not found"
Also tried in Adapter Engine and the result same.
Before doing this scenario, I tried file - file scenario then also the sender file pickedup from source folder but nothing happend at the receiver end.
Any idea's?? what might be the issue????
Thanks,
Venu.

Hi Venu,
"404 is a not found error", plz make a check of your URL you're using is correct? do you use the right port? Normally the port is 80<SystemNo>, so rather 8001 than 7001.
Also check in transaction SICF, if the node /sap/xi/adapter_plain has been activated, if not, activate it and try again.
If you are testing sending the message to the Adapter Engine, then the Send Message URL should be like this:
http://<server>:<J2EEport>/MessagingSystem/receive/AFW/XI
For your error, refer to the following threads:
Unable to find an associated SLD element
Unable to refresh cache contents in XI.
Unable to find an associated SLD element
Also check that the Adapter Engine is successfully registered in the SLD. To do this, call the Content Maintenance function in the SLD as follows:
http://<sld-host>:<sld-j2ee-port>/sld u2192 Administration u2192 Content Maintenance.
Select XI Adapter Framework.
Thirteen associations have to be registered.
(Source: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2498bf90-0201-0010-4884-83568752a857)
If you can't find all the associations, then you will have to create the associations manually.
This is a very good blog which answers ur question:
check this weblog
https://weblogs.sdn.sap.com/pub/wlg/4061?page=last&x-showcontent=off [original link is broken] [original link is broken] [original link is broken]
Regards,
Vinod.

Error when installing SDK on BW platform

We have successfully installed SDK to our DS client, but get an error when installing the extensions on the BW platform (SP12):
I understand that I need to reboot the portal server, but the error message indicate that the issue will not be resolved. Any suggestions?

Hi,
it could be that the depending extension was unpacked while installing the extension pack.
please go to folder C:\user\..\Analysis-config\plugins and check if the extension jar-file is available. If there is only a folder with the extension name you have to delete this folder,
uninstall the extension pack in your Design Studio (client side),
go to Eclipse and check the "Unpack after installing" checkbox in your project Features,
if it is checked please unckeck it,
export your extension pack to zip-file,
install your extenion pack again on client side,
now the jar-file should be available.
You sholud deploy your extension on Server without any errors.
kind regards
Patrick

Error when installing applications

I am getting a error when installing a few different application.
I get this error installing the Citrix Receiver, I get similar errors when installing the Cisco VPN software as well. These are two very important aps for us and need to work on 8.1 if we are to move forward with upgrades.
Product: Citrix Receiver(USB) -- Error 1406. Could not write value GUID to key \SYSTEM\CurrentControlSet\Control\Citrix\Tracing\Modules\IcaClient_GenericUsb_Vdgusb. System error . Verify that you have sufficient access to that key, or contact your support
personnel.
It seams like it is not creating the key in the registry, even though I am a local admin on the system. I have tried running it as a domain admin with the same error. I have also verified I can create keys in the registry
I am currently running Windows 8.1 Enterprise eval on my laptop, we are testing this in our environment.
Thanks in advanced for any help, this one has stumped me a little.

Ask Cisco support/forum for help. This seems to be vendor/product specific
https://supportforums.cisco.com/discussion/12191531/cisco-vpn-client-wont-install-error-1406
http://community.spiceworks.com/topic/492304-cisco-vpn-client-installtion-error-code-1406
http://vootwerk.wordpress.com/2008/06/05/fix-error-1406-during-cisco-vpn-client-installation-or-upgrade/
HTH
Milos

DD Activation Error when installing DaRT via note 99914 SAP3.1I

Similar Messages

Maybe you are looking for