DD/DTS Fatality Platinum not working in console

Sound Card Model : SB0460 (Sound blaster x-fi fatalty platinum) hooked to a Sony Recei'ver STR-K9900P 6.
via optical cable. OS: Windows Vista x64.
I am not able to see the DD or DTS options in my console.
I am able to push windows media player to use DD and DTS after I went into the control panel and changed the audio options to the SPDIF out.
I am wondering why my console does not have the options for DD or DTS.

Still i cant use windows 7 because of this issue i would like to correct the administrator its not eax console its creative audio console and i used the default driver which is available on your site.
If i choose 2.1/4.1/5.1 mode i can hear in headphone too but if i switch to 7.1 no sound on headphone.
i love the feature that i can turn of my speaker controller and keep listening in headphone which i use in windows xp with out changing anything and if i need 7.1 just turn on the speaker volume controller.
I came back after months to see any solution still the audigy 2zs platinum rocks

Similar Messages

DTS Neo PC Not Working!

Hi, I can't get DTS Neo Pc to work, i've tried the three console modes but it still don't work. it says it doesn't support the selected sampling rate (set to 24bit 48000 tried 6bit too)
i tried downloading the latest version of DTS connect pack from Creative but still the same.
I have the X-FI Titanium
using Dan-k Titanium installation disk
anyone else got this problem?
Edit: just installed the new console launcher beta and DTS connect has disappeared.

Uninstall old Creative apps as well as drivers. See page 19 in the user guide. Sort the programs and features list on "Publisher" to see all installed Creative apps. IIRC, the "What u Hear" slider, and associated balance sliders, control volume when the cinematic DDL or DTS encoder is selected but not when the PCM advanced feature is selected.

DTS Surround Sound not working after DTS Update...

I reset my brand new laptop to factory specs--then did the toshiba updates, then windows 8.1, then more toshiba updates which included a DTS update. PRIOR to the updates, DTS worked Perfectly. AFTER the updates, DTS Surround Sound Virtually Muted The Music Entirely. If I turn off Surround Sound, the other DTS parametes/selections Do Work. Nonetheless, I would Love to Have the Surround Sound back in operation. Any suggestions? Thanks!!
OH--and my Realtek HD audio manager in control panel has options not available
such as speaker configuration, and default devices.
Mark

I too have roblems with my DTS after updating to 8.1. After the latest update for the DTS there is at least he console there, to where before I had nothing. That was from the desktop assistant under the "Media and Entertainment". So now it looks as if every thing should be working, but the sound is horendous! With out the DTS's help/
I have the "Satellite C55-A-5300, PN PSCFEU-00MOOG. I just passed the 1 year ark since pprchasing this unit.
I have not had the DTS working at all for about 8 months.
Thanks, Ron

WSUS 3.0 SP2 on Server 2008 R2 not working (no console or other access)

Hi,
In a brand new network with all 2008 R2 servers I setup WSUS. Initially I could not install the role from the Roles tool in Windows and had to install it from a downloaded file from Microsoft (which I later read is due to 2008 R2).
This ran fine for about 2 weeks, I had all the clients and workstations in groups, approving updates and installing them.. all tickety boo and then one day the console wont connect and I have not been able to get back into WSUS to do anything. I tried removing
and re-installing WSUS (both keeping the local database and then deleting it the second time) but nothing helps. My event log reports the following every 6 hours:
Event ID 13042 - Self-update is not working
Event ID 12002 - The reporting web service is not working
Event ID 12012 - The API Remoting Web Service is not working
Event ID 12032 - The Server Synchronization Web Service is not working
Event ID 12022 - The Client Web Service is not working
Event ID 12042 - The SimpleAuth Web Service is not working
Event ID 12052 - The DSS Authentication Web Service is not working
Some extra points based on what I have read:
The server DOES have .net 4.0 installed
WSUS has been removed and re-installed
All servers are 2008 R2
The server also runs Remote Desktop Services.. but aside from this is just a file and print server
Because this server (and the whole network) are brand new, standard practice is to run WSUS against the Microsoft update site and install all critical and optional updates and patches and etc..
While it was working, I can't recall installing anything that may have broken it, however typically Windows patches do not cause problems on our machines, so I do not pay too close attention to what gets installed.. Perhaps one of these updates broke WSUS?
Can anyone offer some suggestions for how to troubleshoot this and try get things moving again?
Thanks!

Hi,
> then one day the console wont connect and I have not been able to get back into WSUS to do anything.
Any error message when you launch WSUS console?
You mentioned you have Kaspersky Endpoint Security software installed on WSUS server, have you configured antivirus software to exclude WSUS content directory?
If you cannot access the WSUS console and a timeout error message appears, the CPU of the WSUS server may be at, or very close to, maximum utilization, which causes the database software to time out. If the database software times out, the WSUS console cannot
be displayed.
One way of inadvertently overtaxing your WSUS server is to have antivirus software monitor the WSUS content directory. During synchronization, the antivirus software can overload the CPU.
Please ignore WSUS content in your antivirus software and check the result.
For more information please refer to following MS articles:
Issues with the WSUS 3.0 SP2 Administration Console
http://technet.microsoft.com/en-us/library/dd939877(v=WS.10).aspx
The DSS Authentication Web Service is not working.
http://social.technet.microsoft.com/Forums/en-US/configmgrsum/thread/c901eb7b-7c20-4fb8-87dd-93f128ec8703
WSUS web services not working
http://social.technet.microsoft.com/Forums/en/winserverwsus/thread/5b443a1c-01eb-4b73-ad06-03700032bec2
Lawrence
TechNet Community Support

Audigy 2 Platinum Not Working with MCE 2

Hi all, I cant get any drivers to install for my Audigy 2 Platinum on my computer, which is running Windows Media Center Edition 2005. On?Creative's support?downloads site there are some apps available that are apparently supported for this?O/S?but no drivers. I have tried installing the XP drivers. They do not work. It freezes in the middle of the installation, or finishes but then warns that the driver was not designed for this O/S and thus wont function properly. Im not getting any functionality out of it, so its not like the 2. is working or anything?like I?read in someones previous post.
Does anyone know where I might find these drivers or if their is a work around? Thank you

The problem you are getting has to do with InstallShield and most probably your?Vista configuration... Make sure you are running as administrator and check the log files in the Program Files/InstallShield... folder to see exactly what files you are missing. There is a Creative Knowledgebase article about it, so do read it. Also do remove any Creative XP software, especially make sure you removed the InstallShield Creative folders (in the same location as above), as these have been known to cause Installation failures.

P6N sli platinum not working

Hi all,
I have a problem, i bought my self a P6N sli platinum, so i installed it but it doesnt work:(
I am not getting any vga signal, i know i installed it alright but it isnt working.
I think its my cpu it might not be working with this P6N, i hope anyone can confirm this, because when i check the CPU support at the MSI site it says its compatible.
I got a : Pentium 4, 3.2 mhz 640 2m/800fsb
I hope i get an answer because i have to return the P6N in 5 days, if it isnt working.
thx

Quote from: Maesus on 03-June-07, 15:44:15
Core 2 Duo will perform WAY BETTER than Pentium 4. It is 100% compatible to Pentium 4. Do you know what Pentium 4 model number you have?
Pentium 4, 3.2 mhz
640 <--this is the model number http://www.intel.com/products/processor_number/chart/pentium4.htm
2m/800fsb
O yes and non of the lights on the D-Bracket go on, the green light and orange light on the P6N are on.

K8N Neo Platinum not working

Hi guys,
I finally tired of my old PC and decided to go for a new AMD64+ system. I ordered these components:
A64 3000+
K8N Neo Platinum
2 x 512 MB Corsair XMS3200 2-3-3-6 RAM
I turn the finished PC on, the fans power on, the harddisks make noise and... nothing. The monitor doesn't recieve a signal. According to the DLED-bracket, it hangs on 'Resource Assignment' every time, just before the harddisks are started.
I have tried just about everything, even booting with only the videocard (both R9700 Pro and GeForce 3), still no dice.
I have tried running only one stick of RAM in the different slots, not a success.
I don't have any other CPU or RAM to test it with, so those options are out.
Another culprit is the PSU, but I have a new Mist (Factory modded Fortron / Source) 480 W PSU capable of 22 Amps at the 12V line, so that shouldn't be the problem. It works with good ratings in my old PC.
Any more ideas? It does look like I will be taking it back on Monday.

Quote
Originally posted by RexB
bump. Hi gcb, welcome You'll soon get an answer from a K8N Neo Plat owner. In meantime, pls post your full stats in your sig {add a sig to your "profile"}. Help us help you.
Done
Quote
Originally posted by Jasonxxx
If you could tell us you entire system specs....That means everything and how you have it installed and setup...
Stats are posted, but as I mentioned, even the barest possible setup with a RAM stick and videocard refuses to work. That's without keyboard, mouse and hard disk.
I'm not sure what I can add to that other than saying I can't even get into the BIOS since I get no video.
I forgot one thing: The PC speaker beeps once for about a second. Slightly longer than my old PC did, but not long enough for me to really think about it. Definitely nothing compared to the crescendo I got once when I forgot the extral power to the R9700
Quote
Originally posted by NewNeo
What you describe is how my so-called "cold-boot" problem began. Eventually, I was able to get a boot, but subsequently, anytime the PC was powered-off and left off for a few minutes, then powered-on, the PC would behave in exactly the same way you describe here.
I have since RMAd the board and ordered (additionally) an ASUS K8N-E Deluxe which will be here Monday; I ordered Friday from NewEgg and a check of Fedex indicates that the ASUS package is already at the local dock. My sense from these forums is that the NEO has too many issues to ever satisfy me as an owner, including the ones I have personally experienced and the ones I have only read about. Thus, I'm trying the ASUS. If all goes well with the ASUS, I'll have an extra, brand-new in the box MSI K8N Neo.
See here for some descriptions of my MSI Neo "cold-boot" problem:
https://forum-en.msi.com/index.php?threa...htuser=0&page=1
You may find additional info by searching on my forum psuedonym.
As far as a fix, I just kept wrestling with it till it would finally boot (off/on, disconnecting / reconnecting leads, etc .... nothing ever consistantly did the trick) but I always manged sooner or later to get a boot. Pressing and holding the DEL key or quickly tapping the DEL key as the PC was powered-on seemed to have some connection with success, but only after many failures of the same thing. As I said, very inconsistant. A warm boot, once the PC was running, usually went fine, barring any other unrelated issues.
By the way, my D-Bracket error code always hung at one green LED, lower left in the 4 LED array, which I think indicates initialization of the keyboard controller. Whether this was the cause (keyboard controller) or it just happened to be the point in time where some other problem arose which prevented boot is hard to determine.
Damn, that's a bad experience. I haven't tried banging keys around, perhaps I should try that.
I had a chat with another guy who had a problem akin to this. In his case, the BIOS was borked. I'm really not sure if I'm going to ask for a new Neo board or go for the Gigabyte one instead if I can't fix it.
Funny how I never had any trouble with Via boards before while nForce3 is a general bad experience for me

Hyper-V guest OS, keyboard does not work from console

Brief background:
I'm doing some lab environment testing with Storagecraft Shadowprotect backup for a client. We are backing up Hyper-V guest operating systems. For busines continuity, the backups can be spun up to Oracle VirtualBox VMs in the event of disaster,
but the backups can also be restored via their Headstart Restore tool to a VHD or VHDX. Right now, I'm using a Windows 7 x64 VM for the test backup.
Here is my current problem (for the moment, forget about the Storagecraft part). Once the VM is restored, I've lost access to the keyboard via Hyper-V console (the mouse does work, this allowed me to run the
on-screen keyboard so I could see what was going on, and then test via RDP). I can RDP to the VM and use the keyboard and mouse. I have a few unknown devices in the Device Manager that weren't there before. The processor also has a
"splat" (yellow triangle, exclamation point).
At this point, I don't want to troubleshoot the "why" (that will be another step), but I do wish to find out how to reinstall the necessary drivers to get the system working. I tried reinstalling the Hyper-V Integration Services, but the
VM says they are already installed. These can't be uninstalled via Control Panel. I've tried mounting the Hyper-V Integration Services and doing a right-click "Repair" using the msi in the Support folder (both the x86 and the amd64);
when I do this, it reports that the action is only valid for products that are currently installed. The same happens for an uninstall.
Does anyone have any ideas how I can get keyboard support back?
Everyone gets everything he wants. Me, I wanted to be a sysadmin. And for my sins --they made me one.

Hi Sir,
>> I have a few unknown devices in the Device Manager that weren't there before. The processor
also has a "splat" (yellow triangle, exclamation point).
For troubleshooting , please try to use Windows server backup to backup/restore VM to narrow it down .
In addition please try to use installation media to perform "in-place upgrade" to "repair"
that VM .
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

MOVED: P6N sli platinum not working

This topic has been moved to Intel Core Duo and Core 2 Duo based boards.
https://forum-en.msi.com/index.php?topic=108834.0

Quote from: Maesus on 03-June-07, 15:44:15
Core 2 Duo will perform WAY BETTER than Pentium 4. It is 100% compatible to Pentium 4. Do you know what Pentium 4 model number you have?
Pentium 4, 3.2 mhz
640 <--this is the model number http://www.intel.com/products/processor_number/chart/pentium4.htm
2m/800fsb
O yes and non of the lights on the D-Bracket go on, the green light and orange light on the P6N are on.

SB0460 AC3/DTS decoder not working on Windows 7 (Driver 2.18.0015)

Hello everybody!
I hope somebody will be able to help me with my strange problem:
I just did the move from Windows XP (x64) to Windows 7 (x64) and discovered that the X-FI's AC3/DTS decoder is not working. All I get is either noise/static/crackling (AC3) or no sound at all (DTS). I have an X-FI XtremeMusic card (Serial: MSB0460535000206P) and the decoder is working absolutely fine on Win XP.
The latest driver version 2.8.005 is installed. I have also tried the first driver (2.8.003) that was supposed to have fixed the decoder under Windows 7. The changelog there says: Dolby? Digital and DTS? decode re-established for sound cards that included decoding in their Windows XP drivers. No such luck for me.
My sound card is definitely supported so I'm wondering why it's not working.
Use Built-in Decoder is selected in the Audio Control Panel I'm passing audio to S/PDIF (from e.g. PowerDVD or MPC-HC). On Win XP usually the on screen display pops up when the decoder detects the signal, nothing on Win 7.
(Note that I am NOT trying to input a signal from an external source.)
Gi'ven everything I have tried, logic tells me that there may still be a bug lurking in the decode driver.
Any ideas?

FI think you have to pay now for the decoder when using digital output but not sure what soundcards are limited.... otherwise try this drivers and see this help but i dont know if they will work...
http: //forums.creative.com/t5/Sound-Blaster/PAX-PCI-XFI-ALL-OS-Driver-V4-5/td-p/574643

IDM is not working with Web Sphere

Hi,
i have installed IDM 7 and make the idm.war and deploying with websphere5. the deployment has success but when i tried to start the application from web sphere admin console the web sphere server stops and not work admin console also.
any other solution.
i am unable to find the loggingtoolkit4j from ibm site and i didn;t get the log.jar
kindly give the path where i can find out

This may not be related, but I found that it may be necessary to turn of the Java 2 security option on the JVM in WebSphere.
To turn off in WebSphere, logon to the WAS Administrative Console and navigate to Security > Configuration > Secure Administration > Applications and Infrastructure. Uncheck the Java 2 Security option.

X-Fi Xtreme Fatality Platinum & Vista 5.1 not work

Here I am again hoping that in the many months I've had this sound card that a solution will drop in my lap and I still wait. I'm going to take another shot at this and hopefully someone who knows what the problem is can fix it.
Vista 64
X-Fi Xtreme Fatality Platinum
Logitech Z-5500 Digital 5. Surround Sound Speakers
I run a speaker setup using Stereo settings and the Left and center channels act as my Left and Right.
I run a Quadraphonic settings and the sound comes from the center channel.
I run a 5. Surround sound setup and the sounds come from only the center channel and subwoofer.
I've checked my hook up and speakers have never been touched since I've made the switch from XP/Audigy to Vista64/XFi.
Someone please tell me what is going on here and why my channels are way off then they should be I've downloaded and installed the latest driver from Creative Labs and used Daniel K's custom made drivers and nothing seems to fix it. I've had this sound card for 6/8/2008 and we're in 9/0/2008. That's 3 months of no sound on my brand new computer and my online gaming experience is really bad especially testing games like WoTLK and Warhammer and not enjoying the quality sound those games have. Please, I'm at a loss here and I can't find a problem. I refuse to purchase another sound card because I felt I've waisted a lot of money on this sound card and for the price I paid it should work.

It's funny how some people say you can enable 5. with vista 64 using alchemy but for 10 days now I have yet to get a response.

5.1 to home theater receiver thru Optical Out not working; Fatality Platinum

I tried connecting the Optical Out on the front to my receiver's optical in. Made sure everything was set to 5. in both the Creative and receiver settings, and the receiver gets optical 5. just fine with my Play Station version 3 and X-box version 360 gaming computers. Please help, I have tried reboot, messing with settings, Google, I cannot fix this.
Jinwoo from great korea!

Hi I have the same probleme, exept that I have succesfuly pluged my home theater receiver and the 5.1 works. Just my subwoofer seems not to work properly. Like when I plug it into a digital dvd player it works very nicely. but when pluged into the sound card it seems that it dosnt have any signal for it.
ANy clues??? I know i pluged everything finely I have tested the sound test for each speaker and sub to, from the receiver and from the creative software the sub seems to work but very quietly even if I cran the volume up on the sub or in the software , the sub dont work as it should.
1 thing I remarqued is that the sub works occasionaly in some movies. When listening to the music it not working and I dont understand that.

Audigy Platinum Ex Windows 7 SPDIF IN not working

Audigy Platinum Ex Windows 7 SPDIF IN not working? I have an old Audigy Platinum Ex that has served me well, until now when I have a new Windows 7 x64 PC (RTM). SPDIF IN no longer works, though everything else does (including SPDIF OUT). I've tried the current and beta drivers for the card, and no difference.
In Windows Vista x64 I could use ASIO drivers with my M-Audio ProFire 60 while using the Audigy for PC audio. Most often this was for skype, which I would set to use SPDIF IN/OUT which I then connected to the ProFires SPDIF OUT/IN. Using the ProFire mixing tool, I could control which mics and levels went to the Audigy while not interfereing with the ASIO drivers recording the mics. The ProFire also recorded the SPDIF OUT from the Audigy to caputre the person on Skype to their own audio track. This is a podcast producer's heaven, and I miss it!
If it's a known issue (SPDIF IN / Win 7), I've had this card through 4 PC upgrades and it's served me well enough I don't mind buying new. The Creative Sound Blaster X-fi Elite Pro looks to be the current version of my Ex - are there any Windows 7 issues currently that would stop me from using it in the role above? I will miss the FireWire port, a shame they dropped that.

Well basically it is possible, and I've found this out. Apparently Dell released a driver or something that allows it to work, but then only if you install a 3rd party modified xp version of the creative suite. I don't remember where I found it, but it was through google... Using some term including x-fi, dts, and vista.... Can't seem to find it now. Anyway, it had a download for the whole creative suite that was modified from the xp version for Vista, however it was buggy as hell, caused driver issues and blue screens, and ended up causing me to have to reinstall Vista altogether again. In other words, it's possible, but I don't recommend it until it's officially supported... Don't know when this will be yet... *crosses fingers*
Luckily I've got a dual OS system with XP too, and I switch to that when I want to use my Xbox 360... However due to Microsoft also being terrible in that department... I now get entertainment off of its 3 red lights... (For those of you who don't know, 3 red lights = hardware error. Sending into microsoft for repair typically is a 2 month process... I'm still waiting on my prepaid shipping box to arri've and it's been 4 days... Will be a similar wait to get it to them, 4-6 weeks for them to actually repair, and another week or so to get it all shipped back). Although even when the console worked, my dsl modem sometimes cut out when playing on Xbox li've and dropped signals, reported errors, etc.
What is with the companies producing technology nowadays? I just want to play Gears in 5. on Xbox li've... *cries*Message Edited by Supercoolyo on 07-22-20070:54 AM

Admin Server Console is not working

Hi,
I have installed weblogic server 9.2 wirh SIP server on win2k the created domain successfully. With "Admin Server Console", I can not do anything because I get following errors;
It seems XML to HTML transform is not working? Any help is appreciated.
"The template you provided at /WEB-INF/templates/form.xml could not be processed"
"ERROR: 'Instruction unknown: loadinstruction'
FATAL ERROR: 'Could not compile stylesheet'

You are getting below exception when trying to start Weblogic Server or while accessing the Weblogic console URL?
- - Weblogic Consultant

DD/DTS Fatality Platinum not working in console

Similar Messages

Maybe you are looking for