DDIC Activation error for SAP HR SP 23

Hello,
We have installed ECC 6.0 SR3 with DB2 as database and HP UX OS.
When I am updating HR Software component to SP23, it gives an DDIC Activation error. After checking the logs, "Table Type HRPP_T_PPDIT_HASH could not be activated" was displayed.
Did a consistency check on table PPDIT, which said it was consistent.
Kernel level is latest 185. R3 trans and Tp is also latest.
Kindly help.
Regards,
Sagar

Hi
Please check the following SAP Notes
Note 672651 - OCS: Known problems with Support Packages in Basis Rel.6.40
Note 573044 - Unicode conversion for HR application
Regards
Chen

Similar Messages

DDIC ACTIVATION ERRORS in ACT_700 phase

During upgrade from 470x200 to ECC600 SAPup stopped in phase ACT_700 with following error:
ERROR: 120 errors detected during ACT_700.
       Analyze summary error logfile ACTUPG.ELG
       and remove all error conditions in the way
       it is described in the upgrade manual. Repeat
       this phase until it is error free.
       Additional hints may be given in logfiles
       SLOG700 and /usr/sap/put/log/SAPup.ECO
I have checked ACTUPG.EGL log and I found following entries:
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-60012INFICA.LMU
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code           : "8"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-60012INFICAX.LMU
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code           : "8"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-60012INFINBASIS.LMU
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code           : "8"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-60012ININSURANC.LMU
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code           : "8"
All these entries are without any description which objects are not activated.
I have also checked other logs particularly SLOG700, ACT_UPG.SLG and SAPAAAA700 and I found in SAPAAAA700 following statistic:
1 ED0306       "Statistics on Activated and Deleted Objects"
1 ED0301 *************************************************************************
1 EDO601XNumber of objects to be activated............: "50323"
1 EDO605 Objects not activated........................: "0"
1 EDO606 Activated objects with errors in dependencies: "0"
1 EDO604 Objects activated with warning...............: "14128"
1 EDO603 Successfully activated objects...............: "36195"
1 EDO602 Number of objects to be deleted..............: "408"
1 EDO608 Objects not successfully deleted.............: "0"
1 EDO607 Successfully deleted objects.................: "408"
1 EDO609 Tables/views with DROP/CREATE................: "0"
1 EDO610 No. of them marked for DROP/CREATE: "0"
1 EDO611 Not marked for DROP/CREATE: "0"
1 EDO620 Number of nametabs to be deleted.............: "0"
1 EDO622 Successfully deleted nametabs................: "0"
1 EDO621 Nametabs that were not successfully deleted..: "0"
So according to this statistic everything should be OK? Is it possible that? Can I ignore this error and continue with upgrade or is it possible to find out somewhere which objects are not activated?
Thanks for your answers
Andrej

> SAPAAAA700 following statistic:
Search that file for the string
could not be activated
The upgrade puts all logs into one big file.
Markus

DDIC ACTIVATION ERRORS at Preprocessing phase.

Hi,
we are Installing SAP Enhancement Package4 on SAP ERP 6.0 at the preprocessing phase we are getting the below error, so please help me in solving this.
ERROR:
=================================================================
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-60014INECCDIMP.DV2 . 1 ETP111 exit code : "8" .
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-60014INERECRUIT.DV2 . 1 ETP111 exit code : "8" .
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-60014INFICA.DV2 . 1 ETP111 exit code : "8" .
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-60014INFINBASIS.DV2 . 1 ETP111 exit code : "8" .
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-60014ININSURANC.DV2 . 1 ETP111 exit code : "8" .
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-60014INISCWM.DV2 . 1 ETP111 exit code : "8" .
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-60014INISM.DV2 . 1 ETP111 exit code : "8" .
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-60014INISOIL.DV2 . 1 ETP111 exit code : "8" .
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-60014INISPSCA.DV2 . 1 ETP111 exit code : "8" .
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-60014INISUT.DV2 . 1 ETP111 exit code : "8" .
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-60015INECCDIMP.DV2 . 1 ETP111 exit code : "8" .
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-60015INFICA.DV2 . 1 ETP111 exit code : "8" .
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-60015INFINBASIS.DV2 . 1 ETP111 exit code : "8" .
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-60015ININSURANC.DV2 . 1 ETP111 exit code : "8" .
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-60015INISH.DV2 . 1 ETP111 exit code : "8" .
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-60015INISM.DV2 . 1 ETP111 exit code : "8" .
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-60015INISOIL.DV2 . 1 ETP111 exit code : "8" .
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-60015INISPSCA.DV2 . 1 ETP111 exit code : "8" .
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-60015INISUT.DV2 . 1 ETP111 exit code : "8" .
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-60016INISH.DV2 . 1 ETP111 exit code : "8" .
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-60017INISH.DV2 . 1 ETP111 exit code : "8" .
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-603DDINEAAPPL.DV2 . 1 ETP111 exit code : "8" .
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-603DDINSAPAPPL.DV2 . 1 ETP111 exit code : "8" .
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-603DMINEAAPPL.DV2 . 1 ETP111 exit code : "8" .
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-603DMINSAPAPPL.DV2 . 1 ETP111 exit code : "8" .
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-603DRINEAAPPL.DV2 . 1 ETP111 exit code : "8" .
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-603DRINSAPAPPL.DV2 . 1 ETP111 exit code : "8" .
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-603DZINEAAPPL.DV2 . 1 ETP111 exit code : "8" .
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-603DZINSAPAPPL.DV2 . 1 ETP111 exit code : "8" .
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-60401INEAAPPL.DV2 . 1 ETP111 exit code : "8" .
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-60402INEAAPPL.DV2 . 1 ETP111 exit code : "8" .
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-60403INEAAPPL.DV2 . 1 ETP111 exit code : "8" .
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-604DDINEAAPPL.DV2 . 1 ETP111 exit code : "8" .
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-604DDINSAPAPPL.DV2 . 1 ETP111 exit code : "8" .
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-604DMINEAAPPL.DV2 . 1 ETP111 exit code : "8" .
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-604DMINSAPAPPL.DV2 . 1 ETP111 exit code : "8" .
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-604DRINEAAPPL.DV2 . 1 ETP111 exit code : "8" .
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-604DRINSAPAPPL.DV2 . 1 ETP111 exit code : "8" .
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-604DZINEAAPPL.DV2 . 1 ETP111 exit code : "8" .
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-604DZINSAPAPPL.DV2 . 1 ETP111 exit code : "8" .
====================================================================
Thanks:
Giridhar.
Edited by: giridhar n on Jun 6, 2009 1:52 PM

> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> DDIC ACTIVATION ERRORS and RETURN CODE in SAPAAAA701.SBA
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> 1EEDO519X"Domain" "/SPE/DO_ITEM_PROCESS_EHP4" could not be activated
Not seen this one before. This domain is part of a table append for EWM called "Item Process for Integration of EWM and Manufacturing" - was a business extension activated on the source system? What was the source? EHP3?
> 1EEDO519 "Technical Settings" "V_TIVCAAPPLADD" could not be activated
I would try to activate that view using SE11.
> 1EEDO519 "Srch Help" "H_5ITCN" could not be activated
> 1EEDO519 "Srch Help" "H_5ITTT" could not be activated
Those are documented in the upgrade note "1143022 - Installation of SAP Enhancement Package 4 on SAP ERP 6.0".
> 1EEDO519 "View" "V_FBN_T74HB" could not be activated
Also documented in "Note 1289778 - Error when activating/generating view V_FBN_T74HB"
> The SAPAAAA701 log has hundreds of entries similar to
> 1 EDO534 Object "LANG" "TABL" "/NFM/A_BKNVV" was already activated
> and
> 2 EDO705 Data element "CRDSEF_LOG_ITEM_SEVERITY_CODE" marked for deletion
> and
> 2 EDO728 Table "SAPPLCO_SC_GMIDRGMITMPURORDREF" deleted
> followed by hundreds of lines of German
> then lines similar to
> 2WEDO549 "Data Element" "SALRT_EXPIRYTM_PI" was activated (warning for the dependent tables)
>
Those are all normal upgrade hints.
If you have such real errors as the first ones you posted it's a good advise to just fire up a browser, open http://service.sap.com/notes and search for the object name... in 90 % of the cases you will find a note.
Often it also help to just repeat the phase and check the log again. some of the problems are sometimes just sequence problems that are gone after the second try.
Markus

DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCG730

Hi there,
We are doing an upgrade from 3.5 BI to 7.3, we ran into an error during the MAIN_SHDRUN/ACT_UPG phase. The Error (show below)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCG730.MIT
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1EEDO519 "Table" "/BIC/CZZI_DS_INT" could not be activated
1 ETP111 exit code
Does anyone came know how resolve this error ? Please advice
Many Thanks
Jacob

Hi Jacob,
In order to resolve this issue you have to unlock the shadow system and activate the table.
Procedure for unlocking shadow system
go to you bin directory (i.e) /usr/sap/SID/upg/abap/bin
./SAPup unlockshd SID
After unlocking login to shadow system client 000 and fix the above errros.
Remember to lock the shadow system before repeating the phase again.
Locking Shadow system : go to bin directoty and issue the command ./SAPup unlockshd SID
Regards,
Ershad Ahmed.

DDIC ACTIVATION ERRORS and RETURN CODE in SAPA700VT1.LBP During Prepare

Hi Gurus,
For The Error mesage During prepare
Restart logs of DB conversions found
n Outstanding DB conversions found
We refer the Upgrade Guide & followed the steps thro SE14 Choose >DB Requests> Terminated .
Nothing found.
Then we Edit the Table found in error log ( CONV ENTRY TBATG INDX/BIC/FZLDEL_C11 0600CREB 200710032STEAM) . & by mistekan used the option Extras > Force conversion.
Now table TABTG is missing in from DATA Base & we are facing the Error
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA700VT1.LBP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "12"
Again when we check SE14 Choose >DB Requests> Terminated it shows one Entry TBATG but is not exist now
Help me

Hi,
Did you checked SM13 or SMQ1? that´s the probable cause for that error, now you should open an OSS note or start all over again.

DDIC Activation error during SAP_HR component upgrade in ECC 6.0

Hi All,
We were upgrading the SAP_HR component in ECC 6.00 to SP 10 (SAPKE60009 - SAPKE60010).Upgrade is failed in DDIC_ACTIVATION step.
Below is the error message
Relationship T5FPBS4G-OFFGC for table T5FPBS4GO does not exist
Message no. MC683
Diagnosis
A secondary table for which the foreign key relationship no longer exists was included for an aggregate (view, matchcode, lock object).
Procedure
Find out whether the foreign key for the specified field was changed. It might be necessary to adjust the aggregate to the new foreign key definition.
In table T5FPBS4GO, Field OFFGC is there but Foreign Keys filed is unchecked
And in table T5FPBS4G there is no field OFFGC.
Could you please suggest me on this. If any one faced the issue please let me know.
OS: Windows 2003 Server
DB: MS SQL
BASIS and ABAP component on SP15
There is no information available in Note 822379 - Known problems with Support Packages in SAP NW 7.0 AS ABAP
Regards
Preethish,

Hi,
Since it is DDIC activation its not possible also to revert. I sincerely suggest you to overcome the problem without deleting the entry in the table. I haved faced the similar kind of issue in my experience and i resolved with the help of abaper. I suggest you to just get a help from abaper and creating the table field and flag the foreign key in the particular table. It will surely resolve your problem.
Incase if you want to dlete the entry in database table level emans. Use this functional module
Spam_reset _status in se37 and by forcefully you can delete the entry of the component. adn also please chck in table also pat01 pat02 and pat03..delete manually.
Hope it will resolve ur problem
Regadrs
Vijay kumar G

DDIC ACTIVATION error while uploading the patch sapkb70009

hi
when uploading the patch of sap basis in ides , m facing an error of ddic activation and transport error 8 .
pls suggest the reasons after this and help me into it .
Thx & Regards
Shilpa

Hi Shilpa,
You can refer Note 822379 - Known problems with Support Packages in SAP NW 7.0 AS ABAP.
This note describes the problems with SP dependencies , the recommended SP queues etc.
If doesnot help pls provide us the import log
Best Regards
Umesh

DDIC Activation Error during import of KB64002

Hi,
I'm running WebAS ABAP+J2EE system on Win2K/Oracle9.x environment with XI3.0. I've already applied KB64001 patch successfully.But when i appled KB64002 patch, the import went for around 18 hrs. when i checked the process overview, i found no process were running. So I terminated the import during the DDIC activation state.
Now when I tried to import again, the system status reads as "tp buffer prepared OK" for a very longtime.
I have the latest kernel patches applied to the system.
Please help in this regard.
THanks
Sridhar

Hello folks,
The reason being program "RDDMASGL" running under User "DDIC" is not terminated.
Ensure to delete the entry from database. I deleted with the help of my ABAP friend via, debugging.
for your simplicity, here are the tables where you will have to delete the entry.
Database View: V_OP
Database Tables:TBTCO & TBTCP.
Delete the incorrect entry (with Job name - RDDMASGL, Status - Not Active) from these two tables.
The issue is resolved and the error "TP Buffer Prepared OK" flies away -
Hope you guys will find this tip helpful.
Let me know, if anyone of you have any issues.
Please award points, if it helps resolve your issue.
Regards,
Kamesh

Repository import error for SAP Basis 640 SWC

Hi,
I am getting an error when importing SAP Basis 640 Software components into Integration repository. It is giving thsese java errors:
com.sap.engine.services.ejb.exceptions.BaseRemoteException: Exception in method importFromImportSource. at com.sap.aii.ib.sbeans.transport.TransportServiceRemoteObjectImpl10.importFromImportSource(TransportServiceRemoteObjectImpl10.java:850) at com.sap.aii.ib.sbeans.transport.TransportServiceRemoteObjectImpl10p4_Skel.dispatch(TransportServiceRemoteObjectImpl10p4_Skel.java:100) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:304) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:193) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:122) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Caused by: java.lang.NoClassDefFoundError at com.sap.aii.utilxi.core.strings.StringConversion.xml2String(StringConversion.java:645) at com.sap.aii.utilxi.dtd.api.DtdHelper.getString(DtdHelper.java:381) at com.sap.aii.utilxi.dtd.api.DtdParser.parseInputSource(DtdParser.java:68) at com.sap.aii.ibrep.bom.extdef.DtdInternalExternalCategoryService.getDtdSchema(DtdInternalExternalCategoryService.java:72) at com.sap.aii.ibrep.bom.extdef.DtdInternalExternalCategoryService.getExternalReferences(DtdInternalExternalCategoryService.java:48) at com.sap.aii.ibrep.bom.extdef.ExternalCategoryServiceImpl.getExternalReferences(ExternalCategoryServiceProvider.java:51) at com.sap.aii.ibrep.bom.extdef.ExternalDefinition.getExternalReferences(ExternalDefinition.java:35) at com.sap.aii.ibrep.server.persist.extdef.ExtDefInternalPersistSevice.writeTypeData(ExtDefInternalPersistSevice.java:95) at com.sap.aii.ib.server.persist.gen.PersistServiceProvider$PersistServiceImpl.writeObjectVersion(PersistServiceProvider.java:446) at
The environment is same as in our development server.
Any idea what causes this error.
Thanks for your help.
Madhu

Hi Vijay,
1.Check the pre-requsites of Basis patch # 9.
2.What is your abap patch # ?
3.Sometimes if you apply the patches by bundling them in queue,it will error out.
4.Try to clear the import queue,and apply the patches one after another instead of in queue.
I hope this helps,reply back.
Rgs
vikas

Imeassage activation error for ipod

I recently upgrades the operating systems on the kids IPODs allowing I message but keep getting I Message Activation Error please retry. I have a WI-Fi connection working, not sure what else to try?

You can try here:
Can't Activate FaceTime
However, I suspect an Apple server problem. Many users have been reporting problems with Messages and Facetime today.

DSO Activation error in SAP BI 7.0

Hi all,
I am trying to activate a DSO which is created by me in SAP BI7.0.When I save the DSO it didn't placed any error even when I clicked Check it dispalyed as consistent.But When I clicked activate it placed an error saying the DSO cannot be actvated.
1.The creation of the export DataSource failed
Message no. RSBM035
Diagnosis
The creation of the DataSource &v1& was unsuccessful.
System Response
Whilst generating the export InfoSource, the metadata for a DataSource must be generated. An error arose when doing this.
Procedure
Consult the appropriate developer (function module: RSB1_OLTPSOURCE_GENERATE).
2. Error when opening an RFC connection
Message no. RSAR051
3.Error when creating the export DataSource and dependent Objects
Message no. RSDODSO169
4. Error when activating DataStore Object
Message no. RSO404
I have tried to check the RFC connection in SM59 but I didn't find anything.If we need to create an RFC connection then please let me know the steps.This activation of DSO is very important as it is stopping all the work.Please suggest me what Steps need to be taken now as this is very important.
Regards
D

in SM59 double click your XYZ destination,might have to correct the IP address in SM59
perform a "test connection"
if not fine then check the target host, system number and name/ip and modify them accordingly; don't forget that this is MyBW system you have to maintain actually your XYZ host details.
if the test went through, the next is to test authorizations: menu test, authorizations. Check tab logon/security settings; you should use ALE as user... you need to know this pwd if you change it!. Check if this user is not locked.
Hope it Helps
Chetan
@CP..

Mass Activity - Error in SAP CPS

Hi guys,
I am trying to run a mass activity from SAP CPS in the ISU system. I imported the mass activity - 0004, the posting and the document date had to be changed dynamically, so I created a parameter set as shown here.
Created a job to copy parameters(these two parameters only). Ran the job, the parameters are created and copied to target id FPMA5
Created a copy of the job SAP_MassActivityTemplateRun -> Used the Target ID as shown and date as today.
So, I am consuming the Identification FPMA5 from the previous job run here. Tried to run it, getting the below error in the SAP CPS system.
com.redwood.scheduler.connector.sap.rfc.connection.exception.SapBapiException: BAPI exception while calling /SCJS/ISU_START_MASS_ACTIVITY: E XM 300 RAISE_EXCEPTION {00,341} Runtime error & has occurred [0004,K2,26.05.2014,FPMA5]
BAPI exception while calling /SCJS/ISU_START_MASS_ACTIVITY: E XM 300 RAISE_EXCEPTION {00,341} Runtime error & has occurred [0004,K2,26.05.2014,FPMA5] [RAISE_EXCEPTION, {00,341}, Runtime error & has occurred, [0004,K2,26.05.2014,FPMA5]]
Parameters:
0004
2014-05-26
FPMA5
X
        at com.redwood.scheduler.connector.sap.rfc.jco2.connection.impl.ClientConnectionImpl.checkBapiReturnCode(ClientConnectionImpl.java:727)
        at com.redwood.scheduler.connector.sap.rfc.jco2.connection.impl.ClientConnectionImpl.call(ClientConnectionImpl.java:533)
        at com.redwood.scheduler.connector.sap.rfc.connection.AbstractRfcConnection$4.doPerform(AbstractRfcConnection.java:310)
        at com.redwood.scheduler.connector.sap.rfc.connection.RemoteFunctionCall.perform(RemoteFunctionCall.java:147)
        at com.redwood.scheduler.connector.sap.rfc.connection.AbstractRfcConnection.perform(AbstractRfcConnection.java:481)
        at com.redwood.scheduler.connector.sap.rfc.connection.AbstractRfcConnection.execute(AbstractRfcConnection.java:303)
        at com.redwood.scheduler.connector.sap.rfc.jco2.connection.impl.SapFunctionModuleWrapper.execute(SapFunctionModuleWrapper.java:200)
        at com.redwood.scheduler.connector.sap.rfc.jco.AbstractSapFunctionModule.execute(AbstractSapFunctionModule.java:109)
        at com.redwood.scheduler.connector.sap.rfc.command.impl.AbstractMassActivityRunCommand.startMassActivity(AbstractMassActivityRunCommand.java:264)
        at com.redwood.scheduler.connector.sap.rfc.command.impl.MassActivityTemplateRunCommand.doExecute(MassActivityTemplateRunCommand.java:50)
        at com.redwood.scheduler.connector.sap.rfc.command.impl.AbstractMassActivityCommand.execute(AbstractMassActivityCommand.java:67)
        at com.redwood.scheduler.connector.sap.rfc.command.AbstractXbpCommand.doExecute(AbstractXbpCommand.java:84)
        at com.redwood.scheduler.connector.sap.rfc.command.AbstractCommand.execute(AbstractCommand.java:57)
        at com.redwood.scheduler.connector.sap.rfc.service.operation.RunJobOperation.doWork(RunJobOperation.java:136)
        at com.redwood.scheduler.connector.sap.rfc.service.SapJobWork.doWork(SapJobWork.java:38)
        at com.redwood.scheduler.infrastructure.workqueue.Worker.run(Worker.java:76)
        at java.lang.Thread.run(Thread.java:722)
I now added other parameters into the parameter set, maintained them in the COPY_Parameter job. Even then I get the same error!
I believe my problem is this - I am able to copy the parameters, but passing them to the Mass activity is somehow failing(I am using the MASS_ACTIVITY_TARGET_ID field output from Copy parameters to MASS_ACTIVITY_ID, which I believe is wrong. But I want to use the copy parameter job's output in the mass activity template run). Please let me know.
I followed this guide: Importing and Running Mass Activities - SAP Central Process Scheduling by Redwood - SAP Library
Thanks and regards,
Pavan

Hi Pavan,
To create a job chain-level parameter, proceed as follows:
Go to Definitions > Job Chains and choose Edit on your job chain
In the job chain editor, click on the Parameters tab
Click Add, fill in Name, for example MASS_ACTIVITY_DATE, fill 0 into Display Order.
In default expression field, fill =Time.expressionNow('truncate day add 3 days')
Make sure Display is checked, click Save
Submit the job chain, you will notice that the date is as expected, cancel the submit.
In the job chain, go to the job for which you want to set the parameter and choose Reference, select the job chain parameter.
The above will use the date at submit time + 3 days, if you want to use the runtime date, when the job chain starts, you disable Display and enable Runtime, remove 'add 3 days'.
Hope that helps.
Regards,
HP

Activation error for the extractor 0fc_bp_items.

Here is the error message that i am facing while activating the data source. 0fc_bp_items.

Hi Ram,
Thanks for the quick turn around as i can see at the source level that.

Installation error for SAP NW 7.01 ABAP Trial version

Hi ,
I am trying to install SAP NW 7.01 Trial version on my local PC which runs on OS windows XP SP2.
I am getting following error while installation Process:
(May 24, 2009 12:40:08 AM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file D:\sapdb\NSP\log.txt for details.
(May 24, 2009 12:40:08 AM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOCUME1/Amar/LOCALS1/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOCUME1/Amar/LOCALS1/Temp/MaxDBSAPNWPREV.log")
     at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
     at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
     at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
     at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Can anyone please suggest me how to overcome this error.?*
Thanks
Regards,
Amar Kamat
Edited by: Amar Kamat on May 24, 2009 12:49 AM

Hi ,
I am trying to install SAP NW 7.01 Trial version on my local PC which runs on OS windows XP SP2.
I am getting following error while installation Process:
(May 24, 2009 12:40:08 AM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file D:\sapdb\NSP\log.txt for details.
(May 24, 2009 12:40:08 AM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOCUME1/Amar/LOCALS1/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOCUME1/Amar/LOCALS1/Temp/MaxDBSAPNWPREV.log")
     at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
     at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
     at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
     at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Can anyone please suggest me how to overcome this error.?*
Thanks
Regards,
Amar Kamat
Edited by: Amar Kamat on May 24, 2009 12:49 AM

Installation error for SAP CE 7.2 Trial

Hello,
I would like to instal SAP CE 7.2 Trial on my PC (XP Pro SP3).
I have this message error :
Modifying the USER AUTORITE NT\SERVICE LOCAL failed. Original error message was:
ind-rel.ind-os.ind-db.j2ee-eng.emptyPassword:
Password for user 'AUTORITE NT\SERVICE LOCAL' is empty.
SOLUTION: Modify the account manually and choose OK to continue. If you choose Cancel, the installation will be aborted.
Do you know why and what to do ?
Regards

Hi Nicolas
Have you found a solution for this problem?
Regards,
Jens

DDIC Activation error for SAP HR SP 23

Similar Messages

Maybe you are looking for