DDIC_ACTIVATION ERROR WHILE APPLYING SUPPORT PACKAGE SAPKW35020 IN ECC5.0

Hi Gurus,
I am getting error DDIC_ACTIVATION while applying support package(BW) SAPKW35020 in ECC5.0 with MSSQL database in Windows server.
I am not able to reset the queue, when i tried to reset the queue the system prompting that " cannot reset queue while DDIC_ACTIVATION" phase".
Can you please help to reset the queue and implementing this support package.
Thank you,
Regards,
Ganesh

Paste the SPAM log here.
Regards,
Nick Loy

Similar Messages

  • DDIC_ACTIVATION ERROR WHILW APPLYING SUPPORT PACKAGES

    Hi all,
    While applying support package(KB62019),i got error(DDIC_Activation)..
    How to resolve it?
    Thanks in advance.

    Hi,
    Which support package are you applying ? Have a look at these notes: 782140 and 447925.
    Search for SAPKB62019 in this note and you will get a solution to that. The note refers to some more notes. Please follow the instuctions in the note carefully.
    Cheers,
    Sunil
    PS: Reward points for helpful answers.

  • Error while applying support packages

    Hi,
    I was applying support packges for NW 7.0 EHP2 for the components SAP BASIS/ABAP/PI BASIS & BW,  the support package level was 02, I have downloaded 03,04,05,06 for all the above four components.  While updating spam/saint update I got the above error, displayed below. But even while applying support packages I got a list of errrors.
    1.     
    Category: Abap programming error
      Runtime error:  call_function_parm_unknown
    CX_SY_DYN_CALL_PARAM_NOT_FOUND
    abap program: RSSPAM07
    Function parameter "IV_IMP_SCENARIO" in unknown
    this first error displayed after applying SPAM/SAINT update.
    2. The import was stopped, since an error occured during the phase IMPORT_PROPER, which the support package Manager is unable to resolve without your input
    The following details help you to analyse the problem:
    Error in phase : IMPROT_PROPER
    Reason for error:
    Return code:
    Error Message:
    Please provide any solution as soon as possible....

    The details of SLOG
    START CMDIMPORT            NG1 L      20120227162812              SHABZ        BasisTrn3 20120227162811973  
    STOP  CMDIMPORT            NG1 L      20120227162813              SHABZ        BasisTrn3 20120227162811973  
    START imp all              NG1        20120227162821              SHABZ        BasisTrn3 20120227162821661  
    INFO: event SAP_IMPORT_START triggered successfully
    START DD IMPORT            NG1 H      20120227162822              SHABZ        BasisTrn3 20120227162821661  
    STOP  DD IMPORT            NG1 H      20120227162839              SHABZ        BasisTrn3 20120227162821661  
    START DD ACTIVATION        NG1 A      20120227162839              SHABZ        BasisTrn3 20120227162821661  
    START tp_getprots          NG1 J      20120227162839              SHABZ        BasisTrn3 20120227162821661  
    STOP  tp_getprots          NG1 J      20120227162925              SHABZ        BasisTrn3 20120227162821661  
    STOP  DD ACTIVATION        NG1 A      20120227162925              SHABZ        BasisTrn3 20120227162821661  
    START DISTRIBUTION OF DD-O NG1 S      20120227162925              SHABZ        BasisTrn3 20120227162821661  
    START tp_getprots          NG1 S      20120227162925              SHABZ        BasisTrn3 20120227162821661  
    STOP  tp_getprots          NG1 S      20120227162929              SHABZ        BasisTrn3 20120227162821661  
    STOP  DISTRIBUTION OF DD-O NG1 S      20120227162929              SHABZ        BasisTrn3 20120227162821661  
    INFO  TBATG CONVERSION OF  NG1 N      not needed                  SHABZ        BasisTrn3 20120227162821661  
    START MOVE NAMETABS        NG1 6      20120227162929              SHABZ        BasisTrn3 20120227162821661  
    START tp_getprots          NG1 P      20120227162929              SHABZ        BasisTrn3 20120227162821661  
    STOP  tp_getprots          NG1 P      20120227162935              SHABZ        BasisTrn3 20120227162821661  
    STOP  MOVE NAMETABS        NG1 6      20120227162936              SHABZ        BasisTrn3 20120227162821661  
    START MAIN IMPORT          NG1 I      20120227162936              SHABZ        BasisTrn3 20120227162821661  
    STOP  MAIN IMPORT          NG1 I      20120227163023              SHABZ        BasisTrn3 20120227162821661  
    START TBATG CREATION OF EN NG1 n      20120227163024              SHABZ        BasisTrn3 20120227162821661  
    START tp_getprots          NG1 Y      20120227163024              SHABZ        BasisTrn3 20120227162821661  
    STOP  tp_getprots          NG1 Y      20120227163034              SHABZ        BasisTrn3 20120227162821661  
    STOP  TBATG CREATION OF EN NG1 n      20120227163034              SHABZ        BasisTrn3 20120227162821661  
    START EXECUTION OF REPORTS NG1 R      20120227163035              SHABZ        BasisTrn3 20120227162821661  
    START tp_getprots          NG1 R      20120227163035              SHABZ        BasisTrn3 20120227162821661  
    STOP  tp_getprots          NG1 R      20120227163202              SHABZ        BasisTrn3 20120227162821661  
    STOP  EXECUTION OF REPORTS NG1 R      20120227163202              SHABZ        BasisTrn3 20120227162821661  
    INFO  EXECUTION OF STANDAR NG1 9      not needed                  SHABZ        BasisTrn3 20120227162821661  
    INFO: event SAP_IMPORT_STOP triggered successfully
    STOP  imp all              NG1   0004 20120227163203              SHABZ        BasisTrn3 20120227162821661  
    START CMDIMPORT            NG1 L      20120227164418              SHABZ        BasisTrn3 20120227164416991  
    STOP  CMDIMPORT            NG1 L      20120227164454              SHABZ        BasisTrn3 20120227164416991  
    START DD IMPORT            NG1 H      20120227165608              SHABZ        BasisTrn3 20120227165607479  
    STOP  DD IMPORT            NG1 H      20120227170309              SHABZ        BasisTrn3 20120227165607479  
    START DD ACTIVATION        NG1 A      20120227170313              SHABZ        BasisTrn3                    
    START tp_getprots          NG1 J      20120227170313              SHABZ        BasisTrn3                    
    STOP  tp_getprots          NG1 J      20120227171206              SHABZ        BasisTrn3                    
    STOP  DD ACTIVATION        NG1 A      20120227171206              SHABZ        BasisTrn3                    
    START imp all              NG1        20120227171208              SHABZ        BasisTrn3 20120227171207614  
    INFO: event SAP_IMPORT_START triggered successfully
    START DISTRIBUTION OF DD-O NG1 S      20120227171208              SHABZ        BasisTrn3 20120227171207614  
    START tp_getprots          NG1 S      20120227171208              SHABZ        BasisTrn3 20120227171207614  
    STOP  tp_getprots          NG1 S      20120227171303              SHABZ        BasisTrn3 20120227171207614  
    STOP  DISTRIBUTION OF DD-O NG1 S      20120227171304              SHABZ        BasisTrn3 20120227171207614  
    START TBATG CONVERSION OF  NG1 N      20120227171304              SHABZ        BasisTrn3 20120227171207614  
    START tp_getprots          NG1 N      20120227171304              SHABZ        BasisTrn3 20120227171207614  
    STOP  tp_getprots          NG1 N      20120227171307              SHABZ        BasisTrn3 20120227171207614  
    STOP  TBATG CONVERSION OF  NG1 N      20120227171307              SHABZ        BasisTrn3 20120227171207614  
    START MOVE NAMETABS        NG1 6      20120227171307              SHABZ        BasisTrn3 20120227171207614  
    START tp_getprots          NG1 P      20120227171308              SHABZ        BasisTrn3 20120227171207614  
    STOP  tp_getprots          NG1 P      20120227171755              SHABZ        BasisTrn3 20120227171207614  
    STOP  MOVE NAMETABS        NG1 6      20120227171755              SHABZ        BasisTrn3 20120227171207614  
    START MAIN IMPORT          NG1 I      20120227171756              SHABZ        BasisTrn3 20120227171207614  
    ERROR: RFC function TRINT_PROGRESS_INDICATOR error: SYSTEM_FAILURE
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    STOP  MAIN IMPORT          NG1 I      20120227195335              SHABZ        BasisTrn3 20120227171207614  
    START TBATG CREATION OF EN NG1 n      20120227195335              SHABZ        BasisTrn3 20120227171207614  
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    START tp_getprots          NG1 Y      20120227195335              SHABZ        BasisTrn3 20120227171207614  
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    STOP  tp_getprots          NG1 Y      20120227195521              SHABZ        BasisTrn3 20120227171207614  
    STOP  TBATG CREATION OF EN NG1 n      20120227195521              SHABZ        BasisTrn3 20120227171207614  
    INFO  EXECUTION OF STANDAR NG1 9      not needed                  SHABZ        BasisTrn3 20120227171207614  
    INFO: event SAP_IMPORT_STOP triggered successfully
    STOP  imp all              NG1   0903 20120227195522              SHABZ        BasisTrn3 20120227171207614

  • Syntax Error while applying support package stack 8

    I get the following short dump while I was applying support package stack 8.  I'm at the latest saint version 34
    Runtime Errors         SYNTAX_ERROR
    Date and Time          23.07.2009 14:09:27
    Short text
         Syntax error in program "CL_DYNPRO_PROPERTY_BAG========CP ".
    What happened?
         Error in the ABAP application program.
         The current ABAP program "SAPLSCR2" had to be interrupted because it con
         a statement that cannot be executed.
         In the include "CL_DYNPRO_PROPERTY_BAG========CM009 " in the line 176 of
          program "CL_DYNPRO_PROPERTY_BAG========CP " the following syntax
         errors occur:
         "The field "SPROP_C_TAG_CUSTOMPROPERTY" is unknown, but there is a fiel"
         "d with the similar name "SPROP_C_TAG_TOOLTIPTEXT". "SPROP_C_TAG_TOOLTI"
         "PTEXT"."
         Author and last person to change the include are:
         Author "SAP "
         Last changer "SAP "
    Error analysis
         The following syntax error was found in the program
          CL_DYNPRO_PROPERTY_BAG========CP :
         "The field "SPROP_C_TAG_CUSTOMPROPERTY" is unknown, but there is a fiel"
         "d with the similar name "SPROP_C_TAG_TOOLTIPTEXT". "SPROP_C_TAG_TOOLTI"
         "PTEXT"."
    Trigger Location of Runtime Error
         Program                                 SAPLSCR2
         Include                                 LSCR2U47
         Row                                     31
         Module type                             (FUNCTION)
         Module Name                             RS_SCRP_PROP_ADD_TO_PROP_LIST
    1 FUNCTION RS_SCRP_PROP_ADD_TO_PROP_LIST.
    2 *"----
    3 ""Lokale Schnittstelle:
    4 *"  IMPORTING
    5 *"     REFERENCE(P_TEXTFIELD) TYPE  D021S-FNAM OPTIONAL
    6 *"     REFERENCE(P_TOOLTIPTEXT_TEXTELEM) TYPE  CHAR3 OPTIONAL
    7 *"     REFERENCE(P_TOOLTIPTEXT_VARIABLE) TYPE  D021S-FNAM OPTIONAL
    8 *"     REFERENCE(P_KEEPTAB) TYPE  SEU_BOOL OPTIONAL
    9 *"     REFERENCE(P_DISABLEIMPLICITLABELS) TYPE  SEU_BOOL OPTIONAL
    10 *"     REFERENCE(P_BARCODEINPUT) TYPE  SEU_BOOL OPTIONAL
    11 *"  CHANGING
    12 *"     REFERENCE(P_PROP_LIST) TYPE  PROP_LIST
    13 *"----
    14
    15 data: l_prop type prop_line,
    16       l_prop_list type prop_list,
    17       l_string type prop_str.
    18
    19 * Property TextField
    20 * -
    21
    22 if p_textfield is supplied.
    23   clear l_prop_list.
    24   clear l_prop.
    25   l_prop-name   = sprop_c_tag_textfield_name.
    26   l_prop-syntax = sprop_c_syntax_content .
    27   l_prop-value  = p_textfield.
    28   append l_prop to l_prop_list.
    29 * Zusammensetzen eines Strings der Form
    30 * <Name>value_1</Name> ... <Name>value_n</Name>
    >>   call method cl_dynpro_property_bag=>fill_prop_list_into_properties
    32     exporting
    33       prop_list  = l_prop_list
    34     importing
    35       properties = l_string.
    36 * Property-Eintrag zusammensetzen
    37   clear l_prop.
    38   l_prop-name   = sprop_c_tag_textfield.
    39   l_prop-type   = sprop_c_type_string.
    40   l_prop-syntax = sprop_c_syntax_content .
    41   l_prop-value  = l_string.
    42 * Property-Eintrag in PROP_LIST aufnehmen/ersetzen
    43   read table p_prop_list transporting no fields
    44       with key name = l_prop-name.
    45   if sy-subrc = 0.
    46     modify p_prop_list index sy-tabix
    47         from l_prop.
    48   else.
    49     append l_prop to p_prop_list.
    50  endif.
    Can anyone help me?  I now get the same error with executing other transactions as well.

    Hi,
    Please let us know the component which you are trying to apply. Is it BASIS or ABAP or BW and also let us know the version?
    I hope you are applying the BW patch 8, as per SAP's recommendation we need to apply both 8 an 9 patch of BW at the same time. If not we need to apply some notes which you could find in the service market place. Once you apply the notes, you can proceed with the SP application.
    Regards,
    Varadhu

  • Error in the phase IMPORT_PROPER while applying support packages

    Dear All,
    I am on ECC 6.0(ABAP+JAVA) SR2, SUSE Linux 10 SP1, DB2.
    I have successfully applied the kernel patch and started applying the support packages,  i have successfully completed applying the ABAP, Basis, BW, HR and other related patches, but i am not sure why i am stuck at the import_proper phase when applying the SAP_APPL patches (SAPKH60008 and SAPKH60009 both in the same queue) and my tp log is as follows
    ========================================================================================================
    START imp all              SCD        20081229080538              DDIC         sealcpro 20081229080537
    INFO: event SAP_IMPORT_START triggered successfully
    INFO  TBATG CONVERSION OF  SCD N      not needed                  DDIC         sealcpro 20081229080537
    START tp_getprots          SCD P      20081229080539              DDIC         sealcpro 20081229080537
    2EETP000 sap_dext called with msgnr "1":
    2EETP000      db call info
    2EETP000 function:   db_setget
    2EETP000 fcode:      RT_SETB (65535)
    2EETP000 tabname:    TRBAT
    2EETP000 len (char): 0
    2EETP000 key:
    2EETP000 retcode:    1
    1AETP000 exit in function texitnow
    ERROR: EXIT(16) -> process ID is: 5319
    STOP  imp all              SCD   0016 20081229080602              DDIC         sealcpro 20081229080537
    =========================================================================================================
    And also when i look at the Support package import logs they show that
    TEST IMPORT
    Import ABAP Dictionary Objects and
    ABAP Dictionary Activation phases ended with return code 4
    But i dont think this can give any problem.
    I have tried to import from the phase where it stopped, but all of a sudden i get disconnected from SAP and get an error message saying that NO CONNECTION TO THE DATABASE, then when i check for the processes for dw and db2 there are process already running.
    I had to start SAP and only then i was able to connect to the SERVER again.
    Can you please help me on this..
    For any more information plz let me know
    Thanks and regards
    Hunky

    Dear Balaji,
    Thank you very much for the reply...
    I deleted the import request in the STMS and wi ran the RDDIMPDP and RDDMNTAB reports and restart the SPAM, but this time the SPAM immediately stopped, but i am still connected to the system and the error which i got earlier (database connection error ) is now not occuring.
    But otherwise also i noticed that i get the following ABAP Dump while this error is triggering
    ===================================================================
    DBIF_REPO_INTERNAL_ERROR
    Internal error when accessing program "CX_SY_OPEN_SQL_DB=============CP ".
    An unspecified internal error occurred in the SAP-internal
    database interface.
    For further analysis the SAP system log should be examined
    (transaction SM21).
    Check the entries in the developer trace of the relevant work process
    (transaction ST11).
    Attempted to access component "LOAD" of program
    "CX_SY_OPEN_SQL_DB=============CP ".
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "DBIF_REPO_INTERNAL_ERROR" " "
    "SAPLSTPA" or " "
    ==========================================================================
    Based on this error i searched few notes and got the below results 309583 and 132383 but these are not for my release.
    So i request you to kindly help me on this as i am running out of time in delivering my server.
    Waiting for all the valuble replies
    Thank you in advance
    Regards
    Hunky

  • DDIC_ACTIVATION error while applying SAPKE60029

    Dear all,
    i am applying support patch of HR.
    having ecc 6.0 with oracle and windows 2003
    beforing applying HR patch i had upgrade spam/saint level 35
    also upgrade latest kernel and all basis, aba, ap, bw patches had been upgrade.
    now when i am importing SAPKE60029 to SAPKE60034 in queue
    then facing a problem with DDIC_ACTIVATION phase
    i restart the spam and again try to import but fid that there are some objects which had been activated with warrning and some not activated .
    INCLUDE TABLE PS9999 is not active
    ROUTINE EXPAND (TABLE PB9999 could not be activated)
    after seeing log i check the status in se11 then i found
    table PS9999 not exsist while PB9999 partialy activated.
    also see notes for knowing error and others ..
    but not able to get what should i have to do...
    Regards
    Dik

    Its ok
    every dependency is ok...
    i resolve the problem with the help of HR....
    just include PS9999 after creating it...then try to activate PB9999
    after that activation phase has been complete sucessfully.
    Regards
    Dik

  • DDIC_ACTIVATION Error while applying SAPKH60301 & SAPKH60302

    Hi,
    While applying the above mentioned patches, SPAM gets stuck at DDIC_ACTIVATION state.
    I have upgrade my Kernel to the latest Patch 159 and Upgrade the oracle Patch as well.
    SPAM Log
    Error during executing the tp command 'tp ACT ALL DVM ...'
    tp return code: '0012' , tp message: 'A tool used by tp aborted' , tp output:
    This is tp version 372.04.29 (release 700, unicode enabled)
    Warning: Parameter DBLIBPATH is no longer used.
    standard output from tp and from tools called by tp:
    Details of the error situation can also be found in the import logs
    Abort the import due to an error situation (30.09.2008, 15:13:54)
    IMPORTLOG_
    DVM        System DVM
                Generate Transport Information File      29.09.2008 20:31:54    (0) Successfully Completed
                Import Request Piece List                29.09.2008 20:33:23    (0) Successfully Completed
                Test Import                              29.09.2008 20:40:14    (0) Successfully Completed
                Import ABAP Dictionary Objects           29.09.2008 20:46:21    (0) Successfully Completed
                ABAP Dictionary Activation               30.09.2008 15:13:42   (12) Canceled
                29.09.2008 21:18:52   (12) Canceled
                29.09.2008 21:41:02   (12) Canceled
    ST22 DUMP
    Runtime Errors         DBIF_RSQL_SQL_ERROR
    Exception              CX_SY_OPEN_SQL_DB
    Date and Time          30.09.2008 15:13:29
                29.09.2008 22:01:17   (12) Canceled
                29.09.2008 22:51:57   (12) Canceled
                30.09.2008 00:27:12   (12) Canceled
    Please help! This server needs to be delivered. Please let me know if I can provide some more information.
    Thanks,
    Vijay Arora

    > Runtime Errors         DBIF_RSQL_SQL_ERROR
    > Exception              CX_SY_OPEN_SQL_DB
    > Date and Time          30.09.2008 15:13:29
    >             29.09.2008 22:01:17   (12) Canceled
    >             29.09.2008 22:51:57   (12) Canceled
    >             30.09.2008 00:27:12   (12) Canceled
    Please check the dump in ST22 and check the "analysis" section of it. There you will see the database error. (and/or you can check SM21).
    Markus

  • While Import support package getting error in R/3

    Hi All,
    I am getting one error following error while importing support package in R/3.
    Open data extraction requests
    The system has found a number of open data extraction requests.These should be processed before starting the object import process, as changes to DDIC structures could prevent data extraction requests from being read after the import, thus causing them to terminate. Call the Customizing Cockpit data extraction transaction and process all open extraction requests.
    Can Anybody aware of this error. How do I delete the open data extraction process specified here.
    Thx & Regds,
    SGK

    Hi,
    I think I have to stop extraction process in LBWE or R/3. Can anybody tell me how to stop extraction process.
    Thx & Regds,
    SGK

  • Error getting while importing support package in R/3

    Hi All,
    I am getting one error following error while importing support package in R/3.
    Open data extraction requests
    The system has found a number of open data extraction requests.These should be processed before starting the object import process, as changes to DDIC structures could prevent data extraction requests from being read after the import, thus causing them to terminate. Call the Customizing Cockpit data extraction transaction and process all open extraction requests.
    Can Anybody aware of this error.
    Thx & Regds,
    SGK

    Hi,
    I think I have to stop extraction process in LBWE or R/3. Can anybody tell me how to stop extraction process.
    Thx & Regds,
    SGK

  • Errors while importing support

    hello all,
    I am getting following errors while importing support
    packages Queue SPAMu2026
    - Error in phase: CHECK_REQUIREMENTS
    - Reason for error: TP_CANNOT_CONNECT_SYSTEM
    - Return code: 0232
    - Error message: connect failed
    I have checked the TPPRAM file, RFC connection and
    it's normalu2026
    I even changed the directory to /usr/sap/trans/bin and
    executed command "tp connect <SID>" and same erroru2026
    Return code: 0232
    Also I tested the connectivity from STMS
    RFC Link tp was started successfully
    tp Version 340.15.02
    DB Connect Link to database failed
    Offline Call connect failed
    any ideas? any suggestions? I really need help.
    Jack Lee

    Dear All:
    the error still the same~
    I excuted the R3trans -d and came out like below:
    C:\Documents and Settings\dbsadm>R3trans -d
    This is R3trans version 6.13 (release 640 - 24.04.09 - 13:43:00).
    2EETW169 no connect possible: "DBMS = MSSQL                            ---  SERV
    ER = 'PRDTEST' DBNAME = 'DBS'"
    R3trans finished (0012).
    and here is the trans.log:
    4 ETW000 R3trans version 6.13 (release 640 - 24.04.09 - 13:43:00).
    4 ETW000 ===============================================
    4 ETW000
    4 ETW000 date&time   : 02.07.2005 - 15:36:52
    4 ETW000 control file: <no ctrlfile>
    4 ETW000 R3trans was called as follows: R3trans -d
    4 ETW000  trace at level 2 opened for a given file pointer
    4 ETW000  [dev trc     ,00000]  Sat Jul 02 15:36:55 2005                            6991  0.006991
    4 ETW000  [dev trc     ,00000]  db_con_init called                                    65  0.007056
    4 ETW000  [dev trc     ,00000]  create_con (con_name=R/3)                            183  0.007239
    4 ETW000  [dev trc     ,00000]  Loading DB library 'dbmssslib.dll' ...                51  0.007290
    4 ETW000  [dev trc     ,00000]  load shared library (dbmssslib.dll), hdl 0          1550  0.008840
    4 ETW000  [dev trc     ,00000]      using "C:\usr\sap\DBS\SYS\exe\run\dbmssslib.dll"
    4 ETW000                                                                              14  0.008854
    4 ETW000  [dev trc     ,00000]  Library 'dbmssslib.dll' loaded                         7  0.008861
    4 ETW000  [dev trc     ,00000]  function DbSlExpFuns loaded from library dbmssslib.dll
    4 ETW000                                                                              11  0.008872
    4 ETW000  [dev trc     ,00000]  Version of 'dbmssslib.dll' is "640.00", patchlevel (0.266)
    4 ETW000                                                                             492  0.009364
    4 ETW000  [dev trc     ,00000]  function dsql_db_init loaded from library dbmssslib.dll
    4 ETW000                                                                               9  0.009373
    4 ETW000  [dev trc     ,00000]  function dbdd_exp_funs loaded from library dbmssslib.dll
    4 ETW000                                                                              19  0.009392
    4 ETW000  [dev trc     ,00000]  New connection 0 created                              75  0.009467
    4 ETW000  [dev trc     ,00000]  0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
    4 ETW000                                                                              40  0.009507
    4 ETW000  [dev trc     ,00000]  db_con_connect (con_name=R/3)                         36  0.009543
    4 ETW000  [dev trc     ,00000]  find_con_by_name found the following connection for reuse:
    4 ETW000                                                                              10  0.009553
    4 ETW000  [dev trc     ,00000]  0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
    4 ETW000                                                                              14  0.009567
    4 ETW000  [dev trc     ,00000]  Thread ID:2320                                      3431  0.012998
    4 ETW000  [dev trc     ,00000]  Thank You for using the SLOLEDB-interface             51  0.013049
    4 ETW000  [dev trc     ,00000]  Using dynamic link library 'C:\usr\sap\DBS\SYS\exe\run\dbmssslib.dll'
    4 ETW000                                                                              37  0.013086
    4 ETW000  [dev trc     ,00000]  dbmssslib.dll patch info                             117  0.013203
    4 ETW000  [dev trc     ,00000]    patchlevel   0                                     112  0.013315
    4 ETW000  [dev trc     ,00000]    patchno      266                                     8  0.013323
    4 ETW000  [dev trc     ,00000]    patchcomment Batch jobs stay in Ready status (1291921)
    4 ETW000                                                                              10  0.013333
    4 ETW000  [dev trc     ,00000]  np:(local) connection used on PRDTEST                 84  0.013417
    4 ETW000  [dev trc     ,00000]  CopyLocalParameters: dbuser is 'dbo'                   9  0.013426
    4 ETW000  [dev trc     ,00000]  Using Provider SQLNCLI                             12800  0.026226
    4 ETW000  [dev trc     ,00000]  OpenOledbConnection: MARS property was set successfully.
    4 ETW000                                                                             570  0.026796
    4 ETW000  [dev trc     ,00000]  Provider Release:9.00.4035.00                      54486  0.081282
    4 ETW000  [dev trc     ,00000]  Using Provider SQLNCLI                              3456  0.084738
    4 ETW000  [dev trc     ,00000]  OpenOledbConnection: MARS property was set successfully.
    4 ETW000                                                                             311  0.085049
    4 ETW000  [dev trc     ,00000]  i'm dbo but there exists 1 users <> dbo with tables SVERS ==> connect terminated
    4 ETW000                                                                            8298  0.093347
    2EETW169 no connect possible: "DBMS = MSSQL                            ---  SERVER = 'PRDTEST' DBNAME = 'DBS'"
    Regards
    Jack Lee

  • Error 1719. The Windows Installer Service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance. Getting this error while installing the package in the windows 2012.

    Getting below mentioned error while installing a package  in the windows 2012 server remotely through psexec command
    Error 1718. Windows Installer Service could not be accessed.
    The same msi is getting installed local in through when we are doing through manually
    Please help on the same

    Hi Rahulan,
    Would you please let us know current situation of this issue? If any update, please feel free to let us know.
    Just addition, please refer to following threads and check if can help you.
    The Windows Installer Service could not be accessed.
    error 1719 windows installer service could not be accessed ....
    Hope this helps.
    Best regards,
    Justin Gu

  • Error while applying patch for SOA suite 10.1.3.4 on Weblogic 9.2 - URGENT

    Hi All,
    I am trying to apply a weblogic patch on SOA server but facing an error while applying the Opatch . I checked the accessibilty to opatch inventory by using the command % opatch lsinventory . This executed fine and there were no errors. But when I try applying the opatch I get the error -that some jars missing . Even if I replace the jars and try executing opatch again I face the same error . I googled a lot but couldnt find any solution . Please let me what can be done for solving this error .
    D:\7337034>opatch apply -oh D:\product\10.1.3.1\OracleAS_1
    Oracle Interim Patch Installer version 1.0.0.0.61
    Copyright (c) 2009 Oracle Corporation. All Rights Reserved..
    Oracle recommends you to use the latest OPatch version
    and read the OPatch documentation available in the OPatch/docs
    directory for usage. For information about the latest OPatch and
    other support-related issues, refer to document ID 293369.1
    available on My Oracle Support (https://myoraclesupport.oracle.com)
    Oracle Home : D:\product\10.1.3.1\OracleAS_1
    Oracle Home Inventory : D:\product\10.1.3.1\OracleAS_1\inventory
    Central Inventory : C:\Program Files\oracle\inventory
    from : N/A
    OUI location : D:\product\10.1.3.1\OracleAS_1\oui
    OUI shared library : D:\product\10.1.3.1\OracleAS_1\oui\lib\win32\oraInstalle
    r.dll
    Java location : "D:\product\10.1.3.1\OracleAS_1\jdk\jre\bin\java.exe"
    Log file location : D:\product\10.1.3.1\OracleAS_1/.patch_storage/<patch ID>
    /*.log
    Creating log file "D:\product\10.1.3.1\oracleas_1\.patch_storage\7337034\Apply_7
    337034_06-02-2009_13-39-26.log"
    Provide your email address to be informed of security issues, install and
    initiate Oracle Configuration Manager. Easier for you if you use your My
    Oracle Support Email address/User Name.
    Visit http://www.oracle.com/support/policies.html for details.
    Email address/User Name: [email protected]
    Provide your My Oracle Support password to receive security updates via your My
    Oracle Support account.
    Password (optional):
    Password (optional):
    Unable to establish a network connection to Oracle. If your systems require a
    proxy server for outbound Internet connections, enter the proxy server details
    in this format:
    [<proxy-user>@]<proxy-host>[:<proxy-port>]
    If you want to remain uninformed of critical security issues in your
    configuration, enter NONE
    Proxy specification: NONE
    ** Installing base package **
    Deploying core - Version 10.3.1.0.0
    Deploying engines - Version 10.2.7.1.0
    Deploying metricdata - Version 10.2.4.0.3
    Deploying scripts - Version 10.3.1.0.0
    Oracle Configuration Manager has been configured in disconnected mode. If the
    target ORACLE_HOME is running a database, please refer to the
    "Post-installation Database Configuration" section of the OCM Installation
    and Administration Guide
    (http://www.oracle.com/technology/documentation/ocm.html) to complete the
    installation.
    View configuration data reports and access valuable configuration best
    practices by going to My Oracle Support.
    Backing up comps.xml ...
    OPatch detected non-cluster Oracle Home from the inventory and will patch the lo
    cal system only.
    Please shut down Oracle instances running out of this ORACLE_HOME
    (Oracle Home = d:\product\10.1.3.1\oracleas_1)
    Is this system ready for updating?
    Please respond Y|N >
    y
    Applying patch 7337034...
    Patching jar files...
    OPatch encounters the following issues during file patching:
    The following java archives on Windows had problems with being patched:
    1. orabpel.jar
    [ object: DomainFilter.class ]
    2. orabpel.jar
    [ object: AdapterFrameworkListenerImpl$RoutingRuleXPathInfo.class ]
    3. D:\product\10.1.3.1\oracleas_1\integration\esb\lib\orabpel.jar
    [ No java archive file found. ]
    4. orabpel.jar
    [ Couldn't make backup copy of file. ]
    5. D:\product\10.1.3.1\oracleas_1\integration\esb\lib\orabpel.jar
    [ No java archive file found. ]
    6. orabpel.jar
    [ Couldn't make backup copy of file. ]
    7. D:\product\10.1.3.1\oracleas_1\integration\esb\lib\orabpel.jar
    [ No java archive file found. ]
    8. D:\product\10.1.3.1\oracleas_1\integration\esb\lib\orabpel.jar
    [ No java archive file found. ]
    9. orabpel.jar
    [ Couldn't make backup copy of file. ]
    Replying 'Y' will terminate the patch installation immediately. It WILL NOT rest
    ore any updates that have been performed to this point. It WILL NOT update the i
    nventory.
    Replying 'N' will update the inventory showing the patch has been applied.
    NOTE: After replying either 'Y' or 'N' it is critical to review:
    My Oracle Support Note 312767.1 How to rollback a failed Interim patch ins
    tallation.
    Do you want to STOP?
    Please respond Y|N >
    y
    File Patching Error!
    ERROR: OPatch failed during patching, possibly due to missing files.
    OPatch returns with error code = 200

    Hi , I am facing the same issue.
    were you able to resolve it.
    please let me know if you were.
    Many Thanks.

  • Error while applying patch 3384350

    Hi all,
    I'm receiving the following error while apply patch 3384350 (Supply Chain Management Family Pack J 11i.SCM_PF.J) to an 11.5.9 instance.
    from adpatch.log:
    The following Oracle Forms objects did not generate successfully:
    inv forms/US INVTDILT.fmx
    from worker log:
    Compiling package body CHECK_RESERVATIONS_ALLOCATIONS...
    Compilation error on package body CHECK_RESERVATIONS_ALLOCATIONS:
    PL/SQL ERROR 358 at line 12, column 9
    column 'INVENTORY_ITEM_ID' exists in more than one table; use qualifier
    PL/SQL ERROR 0 at line 10, column 2
    SQL Statement ignored
    I have a SR open, but thought I would ask here as well in case anyone else had ran into this issue. There was only 1 direct hit on metalink for this error and it provided no solution and it's bug # link was not accessible to the public.
    thanks in advance,
    -Chad

    Compiling package body CHECK_RESERVATIONS_ALLOCATIONS...
    Compilation error on package body CHECK_RESERVATIONS_ALLOCATIONS:
    PL/SQL ERROR 358 at line 12, column 9
    column 'INVENTORY_ITEM_ID' exists in more than one table; use qualifier
    PL/SQL ERROR 0 at line 10, column 2
    SQL Statement ignoredA workaround is to precede the column name ('INVENTORY_ITEM_ID') with the table name so that the column reference is unambiguous. Please note that this is only a workaround to fix the issue if you cannot afford waiting to hear back from Oracle support with a proper solution.

  • Error while applying the Service Policy

    Hi,
    I am getting the below error while applying the service policy to the Interface.
    I have set the mpls exp 4 as well as want to limit the bandwidth to 1Mbps
    PE#sh policy-map setexp-GBoIP
      Policy Map setexp-GBoIP
        Class GBoIP-traffic
          set mpls experimental imposition 4
         police cir 1024000 bc 32000
           conform-action transmit
           exceed-action drop
    PE(config-if)#int vlan 2007
    PE(config-if)#service-policy input setexp-GBoIP
    QoS-ERROR: Addition/Modification made to policymap setexp-GBoIP and class GBoIP-traffic is not valid, command is rejected
    As well as I have created new clas--map with priority and Bandwidth and applied in output direction, I got the belwo error while applying the Service policy in
    PE(config-if)#service-policy out TEST
    bandwidth command is not supported in output direction for this interface
    PE(config-if)#service-policy output TEST
    priority command is not supported in output direction for this interface
    Any idea why so ?
    Thanks in Advance.
    Regards,
    Nilesh

    Check the current value of IGW_AWARDS_S sequence and make sure the MINVALUE in the patch (i.e. 10000) is not greater than the current one.
    OERR: ORA 4007 MINVALUE cannot be made to exceed the current value (Doc ID 19824.1)
    You may also log a SR.
    Thanks,
    Hussein

  • Oracle Security Patch Error while applying --The filename, directory name,

    Hello,
    I am running into strange error while applying Oracle Security Patch 68 by using Opatch.
    Supposedly, All the environment variables are set properly.
    ACTIVE_STATE_PERL=true
    DBMS_TYPE=ORA
    dbs_ora_tnsname=YBQ
    JAVA_HOME=C:\jdk1.3.1_10
    OPATCH_DEBUG=TRUE
    ORACLE_HOME=E:\oracle\ora92
    ORACLE_SID=YBQ
    Path=E:\oracle\OPatch;C:\jdk1.3.1_10\bin;E:\oracle\Perl\bin;E:\oracle\ora92\jre\1.4.2\bin\client;E:\oracle\ora92\jre\1.4.2\bin;E:\oracle\ora92\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\Program Files\Common Files\VERITAS Shared;\NetBackup\bin;C:\Program Files\Windows Resource Kits\Tools\;C:\Program Files\Support Tools\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;E:\usr\sap\YBQ\SYS\exe\run
    Installed Active Perl. latest version
    downloaded Opatch 1.0.0.50
    and the patch number 3738339
    I went to that directory and run the command :
    perl opatch.pl apply
    It started of well.
    OPatch version is: 1.0.0.0.50
    Using ORACLE_HOME/oui to look up oui libs...
    Oracle Home = E:\oracle\ora92
    Location of Oracle Inventory = E:\oracle\ora92\inventory
    Oracle Universal Installer shared library = E:\oracle\ora92\oui\lib\win32\oraInstaller.dll
    Path to Java = "E:\oracle\ora92\jre\1.4.2\bin\java.exe"
    Location of Oracle Inventory Pointer = N/A
    Location of Oracle Universal Installer components = E:\oracle\ora92\oui
    Required Jar File under Oracle Universal Installer = jlib\OraInstaller.jar
    find under OH/oui/jlib
    found OraInstaller.jar
    Checking if this is a RAC system...
    Accessing inventory... This may take up to 300 seconds.
    (retry 10 times, delay 30 seconds each time)
    System Command: ""E:\oracle\ora92\jre\1.4.2\bin\java.exe" -Dopatch.retry=10 -Dopatch.delay=30 -DTRACING.ENABLED=TRUE -DTRACING.LEVEL=2 -Dopatch.debug=true -classpath "E:\oracle\ora92\oui\jlib\OraInstaller.jar;E:\oracle\ora92\oui\jlib\srvm.jar;jlib\opatch.jar;E:\oracle\ora92\oui\jlib\xmlparserv2.jar;E:\oracle\ora92\oui\jlib\share.jar;.:E:\oracle\ora92\jlib\srvm.jar" opatch/O2O "e:\oracle\ora92" "E:\oracle\ora92\oui" opatch.pl 1.0.0.0.50"
    Result:
    ----- DEBUG is ON -------
    oracle.installer.startup_location will be set to E:\oracle\ora92\oui
    oracle.installer.oui_loc will be set to E:\oracle\ora92\oui
    oracle.installer.scratchPath will be set to /tmp
    opatch.local_node_only is OFF
    retryOption is ON: 10
    delayOption is ON: 30
    Few more stuff here .. not pasting the entire contents
    System Command: ""E:\oracle\ora92\jre\1.4.2\bin\java.exe" -Dopatch.retry=10 -Dopatch.delay=30 -DTRACING.ENABLED=TRUE -DTRACING.LEVEL=2 -Dopatch.debug=true -classpath "E:\oracle\ora92\oui\jlib\OraInstaller.jar;E:\oracle\ora92\oui\jlib\srvm.jar;jlib\opatch.jar;E:\oracle\ora92\oui\jlib\xmlparserv2.jar;E:\oracle\ora92\oui\jlib\share.jar;." opatch/CheckConflict "E:\oracle\ora92\oui" "e:\oracle\ora92" opatch.pl 1.0.0.0.50 3738339 "3741539 3528282 3516951 3622875 3668572 3371796 3239873 3356103 3543125 3666502 2800494 2824035 2964252 3617042 3320622 3571233 3253770 3492040 3566469 3354470 3625370 3583686 3150750 3617519 3635177 3597640 3749394 3542588 3698501 2954891 2918138 3559212 3518909 3412818 3430832 3172282 3358490 3637624 3458446 3179637 2810394 3668224 3609791 3566813 3475932 2338704 3412136 3388633 3540576 3571226 3575743 2690205 3240280 3509265 3177513 3575747 3811906 3554319 3752406 3323435 " E:\3738339\etc\config\actions"
    Result:
    opatch.pl version: 1.0.0.0.50
    Copyright (c) 2001-2004 Oracle Corporation. All Rights Reserved.
    The filename, directory name, or volume label syntax is incorrect.
    Error in executing Java program to check conflict
    ERROR: OPatch failed during pre-reqs check.
    Now there is no problem with executing the last java program in the same prompt by removing the first and the last double quote "
    Please advise.
    Thanks in advance.

    hi somnath,
    this is the portal content management forum. for your database question please use the database forums:
    http://forums.oracle.com/forums/index.jsp?cat=18
    thanks,
    christian

Maybe you are looking for

  • Nikon RAW editing software no longer works, why?

    Hi all Nikon NX2 is one of my central tools on my Mac since as a professional photographer I really need it to handle RAW images. It is by far superior to all and any other products for handling RAW (NEF/DNG) files. Nikon seem to have stopped support

  • Trying to update to OS 6 on my iphone 4

    Everytime I try to update, it fails and tells me to check my network settings but they are fully connected? I have tried updating it through the wifi and I've also tried through cable connection to the computer and each time the same error message. C

  • Crystal Report is very slow to fetch the results of a Query used in Command

    Hello All, We have a query which is used in command object in Business Objects Crystal reports XI. This report is executed against IBM DB2 database. It is taking 40 min to getback the results. Here is the Query. Please suggest how can i improve the p

  • Is there any limit for VISA allocate DMA memory ?

    Hi, I have get an error: -1073807300, when I allocate memory for DMA larger than 4M Bytes. Is there any limit for allocate memory for DMA ? I have run the attach vi on win7 32bit or 64bit, It seems there is a limit at about 4M Bytes. However I can al

  • Doubt on SQl query for invoices

    Hi All, I have a query which pulls the payment proposal for the standard invoices and credit memo's being posted into the system from the table BKPF and BSIK. I just want to pull the payment proposal for standard invoices rather than credit memo's. I