DDIC ACTIVATION very slow while applying SPS 7 to ECC 6.0

Hello SDN
I've been running this phase for at least 12 hours, is this normal ?
How can I make it go faster?
I have more patches to apply and I can't wait that long.
Any help is appreciated.
In my sm50 screen I see 2 background processes running :
SAPLSTPA with status On Hold and
RADMASDSC with status running and action sequential read of table DD03L
When I see the detail of RADMASDSC I see that it is running.
Thanks

Hi,
Since it is DDIC activation its not possible also to revert. I sincerely suggest you to overcome the problem without deleting the entry in the table. I haved faced the similar kind of issue in my experience and i resolved with the help of abaper. I suggest you to just get a help from abaper and creating the table field and flag the foreign key in the particular table. It will surely resolve your problem.
Incase if you want to dlete the entry in database table level emans. Use this functional module
Spam_reset _status in se37 and by forcefully you can delete the entry of the component. adn also please chck in table also pat01 pat02 and pat03..delete manually.
Hope it will resolve ur problem
Regadrs
Vijay kumar G

Similar Messages

My MacBook Pro gets very slow while doing work like watching movies and using net .. video gets lag very often

My MacBook Pro gets very slow while doing work like watching movies and using net .. video gets lag very often and while surffing on net it gets very slow ...

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
Otherwise, take the steps below when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

Keyboard is working very slow while on internet

My laptop model is G 62 the keyboard is very slow while working in the internet

Hi,
Firstly, it is not recommended to configure a DNS Server on the External Interface of the ISA Server.
I suspect this issue may cause by some worm/virus infected computers from your internal network. Please run antivirus software on both ISA Server and internal clients.
Besides, I recommend you to check in task manager or performance monitor to see if there are Heavy disk load and resource consumption, high CPU load, high memory usage and high network bandwidth consumption issues.
You can also enable logging of traffic blocked by flood mitigation：
In the console tree of ISA Server Management, click General. In the details pane, click Configure Flood Mitigation Settings. On the Flood Mitigation tab, select Log traffic blocked by flood mitigation settings.
More information:
Overview of flood mitigation
http://technet.microsoft.com/en-au/library/cc995196.aspx
Best regards,
Susie

Hi!I was restoring my MacBook pro to its factory setting by erasing the disk and reinstalling OS X lion via internet.but it is failing telling me that my network is very slow while I used the best network in the area.How sld I get an OS X lion to my CP?

Hi!I was restoring my MacBook pro to its factory setting by erasing the disk and reinstalling OS X lion via internet.but it is failing telling me that my network is very slow while I used the best network in my area.How should I get an OS X lion to my CP? Is it possible to get it from another MacBook pro?Or is it possible to recover the erased OS X Lion without or with external disc?
Thank you

Hi OGELTHORPE!
Thank you for your advice but I don't know where i can get it and where to get it. Also I don't know also how to use it.
Could you please keep on helping me?
Regards!

Form Opening is Very slow while opening from client PC

We are running forms application in 10.1.2.0 application server. We have a peculiar issue of slowness while opening forms from client PC's and not while opening from application server itself.
1) When opening the form from a Windows 7 PC it takes around 25 seconds
2) When opening the form from a Windows XP PC it takes around 15 seconds
3) When opening the form from the application server itself it took less than 3 seconds .
In essence all forms when opened from application server are opening very fast and when opened from client PC's it takes undue time. What might be the reason for the same, can anyone help us and we are pondering over this issue for some time. What are the files of interest to be visited for these kind of issues. We enabled tracing level 5 in JRE and could not find any thing fishy over it.
Request application server and forms experts to participate and help us to resolve.
Thanks in advance.
Edited by: ramarun on Sep 9, 2010 8:27 PM

Hi ramarun,
In etc/host file, enter hostname and IP Address entry in client machine...
or try to access application via IP Address.
I hope it will work for you...
Regards,
Ajinkya

Clob datatype- very slow while appending

Hi,
please help on below pl/sql block.
I have written below code, but the response time is very slow.
the table - aux_comm_3_to_1 has more than 1 Lakh records.
and I have append all the record and send the record as clob OUT parameter to GUI.
Pls suggest me.
declare
TEMP_XML clob;
XML_OW clob;
begin
FOR rec IN (SELECT
FRAMEREFERENCEDATE,
EU_LEU_ID_OWNER,
EU_LEU_ID_SUBSIDIARY,
DIRECT_PERCENT,
QUALITY_IND_DIRECT_PERCENT,
SOURCE_DIRECT_PERCENT,
REF_DATE_DIRECT_PERCENT,
KIND_OF_CONTROL,
SOURCE_KIND_OF_CONTROL,
REF_DATE_KIND_OF_CONTROL,
DATE_OF_COMMENCEMENT,
SOURCE_DATE_OF_COMMENCEMENT,
REF_DATE_OF_COMMENCEMENT,
DATE_OF_CESSATION,
SOURCE_DATE_OF_CESSATION,
REF_DATE_OF_CESSATION,
SOURCE_TA_OWNERSHIP,
REF_DATE_TA_OWNERSHIP
FROM aux_comm_3_to_1 )
LOOP
TEMP_XML :=
'<TARGET_OWNERSHIP="'
|| idcounter
||'"FRAMEREFERENCEDATE="'||rec.FRAMEREFERENCEDATE
||'"EU_LEU_ID_OWNER="'||rec.EU_LEU_ID_OWNER
||'"EU_LEU_ID_SUBSIDIARY="'||rec.EU_LEU_ID_SUBSIDIARY
||'"DIRECT_PERCENT="'||rec.DIRECT_PERCENT
||'"QUALITY_IND_DIRECT_PERCENT="'||rec.QUALITY_IND_DIRECT_PERCENT
||'"SOURCE_DIRECT_PERCENT="'||rec.SOURCE_DIRECT_PERCENT
||'"REF_DATE_DIRECT_PERCENT="'||rec.REF_DATE_DIRECT_PERCENT
||'"KIND_OF_CONTROL="'||rec.KIND_OF_CONTROL
||'"SOURCE_KIND_OF_CONTROL="'||rec.SOURCE_KIND_OF_CONTROL
||'"REF_DATE_KIND_OF_CONTROL="'||rec.REF_DATE_KIND_OF_CONTROL
||'"DATE_OF_COMMENCEMENT="'||rec.DATE_OF_COMMENCEMENT
||'"SOURCE_DATE_OF_COMMENCEMENT="'||rec.SOURCE_DATE_OF_COMMENCEMENT
||'"REF_DATE_OF_COMMENCEMENT="'||rec.REF_DATE_OF_COMMENCEMENT
||'"DATE_OF_CESSATION="'||rec.DATE_OF_CESSATION
||'"SOURCE_DATE_OF_CESSATION="'||rec.SOURCE_DATE_OF_CESSATION
||'"REF_DATE_OF_CESSATION="'||rec.REF_DATE_OF_CESSATION
||'"SOURCE_TA_OWNERSHIP="'||rec.SOURCE_TA_OWNERSHIP
||'"REF_DATE_TA_OWNERSHIP="'||rec.REF_DATE_TA_OWNERSHIP
|| '"/>'
|| CHR (10);
XML_OW:=XML_OW||CHR(10)||TEMP_XML;
idcounter := idcounter + 1;
END LOOP;
end;
----------------------

Can you extend the test also with dbms_lob.writeappend? I am not on the same machine so so I am repeating all tests again (slightly modified):
SQL> set timing on
SQL> declare
   s   clob;
begin
   s := dbms_random.string ('X', 10000);
   for j in 1 .. 100 * 100 * 10
   loop
      s := s || 'x';
   end loop;
   dbms_output.put_line ('Length: ' || length (s));
end;
Length: 104000
PL/SQL procedure successfully completed.
Elapsed: 00:00:20.49
SQL> declare
   s   clob;
begin
   s := dbms_random.string ('X', 10000);
   for j in 1 .. 100 * 100 * 10
   loop
      dbms_lob.append (s, 'x');
   end loop;
   dbms_output.put_line ('Length: ' || length (s));
end;
Length: 104000
PL/SQL procedure successfully completed.
Elapsed: 00:00:25.49
SQL> declare
   s        clob;
begin
   dbms_lob.createtemporary (s, true);
   s := dbms_random.string ('X', 10000);
   for j in 1 .. 100 * 100 * 10
   loop
       dbms_lob.writeappend (s, 1, 'x');
   end loop;
   dbms_output.put_line ('Length: ' || length (s));
   dbms_lob.freetemporary (s);
end;
Length: 104000
PL/SQL procedure successfully completed.
Elapsed: 00:00:20.32So not much of a difference between first and third run ...

BI 7: Background activation very slow compared to Dialog activation

We are using the SAP BI 7.0 with SP15 and this question is about efficiency of dialog process compared to inefficiency of the background process and I want suggestions from SAP Basis/BI experts on this.
We have observed that our background processes on BI server are not running as efficiently as we would like them to run.
For example
DSO activation:
When I use u201CDialogu201D mode for DSO Activation with 3 parallel processes, I can activate a certain DSO with in 15 seconds. But the same DSO and the same data package when activated using u201Cbackgroundu201D mode with 3 parallel process takes about 15 minutes.(there are plenty of background processes available on the system when this activation is running). So dialog process runs 60 times faster than background process.
We saw the job log in SM37 when activation was running in the background mode and log showed that system
u201CProgram RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCTL_49VQYEYSLA9SH00QBYNN3MTUV with ID XXXXXu201D was executed internally about 100 times.
In BI 7 most of the operations can be executed only in the background parallel mode. And from the activation example we know that our background processes are not as efficient as dialog processes. It is understood that in general the background processes will not be as efficient as dialog processes, but in our case the difference is a factor of 60. We want help to identify, why the background processes are not as efficient as dialog processes. Any suggestion or help will be highly appreciated. This may be System Bug in SAP BI 7

I am having this same issue in SP15. Did you find any solution?
I am finding my activation is slow for the number of records being activated. The process RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCTL_49VQYEYSLA9SH00QBYNN3MTUV with ID XXXXXu201D was executed internally about many, many times. And if you look at the aggregate time of all of these schedulings this is what is taking soo much time. Our batch job table is not large so this is not the problem.
Any more ideas?

I did software update for IOS 8 and my I phone 5s coming very slow while using the Internet please I need advise

I did software update iOS 8 for my I phone 5s after That my phone coming very slow when i using internet

Hi ..
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that doesn't help, tap Settings > General > Reset > Reset Network Settings
You will have to re enter your Wi-Fi password.
No data is lsot due to a reset.
If nothing above has helped, try here > iOS: Troubleshooting Wi-Fi networks and connections

DDIC Activation error during SAP_HR component upgrade in ECC 6.0

Hi All,
We were upgrading the SAP_HR component in ECC 6.00 to SP 10 (SAPKE60009 - SAPKE60010).Upgrade is failed in DDIC_ACTIVATION step.
Below is the error message
Relationship T5FPBS4G-OFFGC for table T5FPBS4GO does not exist
Message no. MC683
Diagnosis
A secondary table for which the foreign key relationship no longer exists was included for an aggregate (view, matchcode, lock object).
Procedure
Find out whether the foreign key for the specified field was changed. It might be necessary to adjust the aggregate to the new foreign key definition.
In table T5FPBS4GO, Field OFFGC is there but Foreign Keys filed is unchecked
And in table T5FPBS4G there is no field OFFGC.
Could you please suggest me on this. If any one faced the issue please let me know.
OS: Windows 2003 Server
DB: MS SQL
BASIS and ABAP component on SP15
There is no information available in Note 822379 - Known problems with Support Packages in SAP NW 7.0 AS ABAP
Regards
Preethish,

Hi,
Since it is DDIC activation its not possible also to revert. I sincerely suggest you to overcome the problem without deleting the entry in the table. I haved faced the similar kind of issue in my experience and i resolved with the help of abaper. I suggest you to just get a help from abaper and creating the table field and flag the foreign key in the particular table. It will surely resolve your problem.
Incase if you want to dlete the entry in database table level emans. Use this functional module
Spam_reset _status in se37 and by forcefully you can delete the entry of the component. adn also please chck in table also pat01 pat02 and pat03..delete manually.
Hope it will resolve ur problem
Regadrs
Vijay kumar G

Mac OS very slow while TC is backing up

I just want to know, is it normal for the Mac OS to be extremely slow, stop responding while TC and Time Machine are doing their initial backup?
Message was edited by: danskinoff

This is expected - there is a lot of hard drive activity taking place on the Mac while the initial backup is running. Best thing to do is let it run overnight when you are not using your Mac.

Saving Emails As Activity Very Slow

I have about 4 or 5 users that when they click on the Save Email as activity it seems to take a very long time, in some cases up to 5 minutes to do this for one email. I have checked to make sure that the are no other network problems but everything is fine ont he Network Analyzer that I have used to check for network activity. Plus there access to the internet and other network resources are normal. The server looks normal there is little over head on it as well processor activity is very low along with memory and disk activity is normal. Any suggestion on how to speed this up would be greatly appreciated.

Hi,
Welcome you post on the forum.
Check this first:
Quik save not saving attachment - Outlook Intergration
Re: Outlook Integration and user error message
Thanks,
Gordon

Premiere Pro being very slow while previewing

So recently my friend sent me a png sequence with a alpha channel. And what I want to do with it is put it in Adobe Premiere with my YouTube videos I will edit it with.
But the problem was when I imported it as a png sequence in premiere and previewed the project, it stopped and started and acted very "laggy." I don't know why it is laggy because a png sequence is not a huge file.
IF anyone can help me on how to preview it without lag that would be amazing And is there such thing as a h.264 with an alpha channel?
P.S: I did try converting the sequence into a QuickTime movie with a alpha channel. All it did was make it even more slow when previewing in premiere.

Hi raffaele mariotti,
Please mention some more information mentioned below.
1. Have you taken any backup through time machine for your user profile?
2. What are the media files that you are using in Premiere Pro CC 2014 ?
Regards,
Vinay

Windows 8.1 not activating - very slow response from HP

Sir/Madam,
For past 4-5 days, i have been calling every day to HP regarding my windows activation issue.(every 10 mins a pop up shows " windows about to expire")PC settings show my windows will expire on 16th Dec if activation not done.
1. On the first day i was told to update the windows and install it, i did that
2. on second day i was send a link to update bios, i did that but no use.
3. on the third day i talked over 50 mins on phone and some thing was installed through command prompt.nothing happened
so than customer executive remotely accessed my computer again installed some files and told me to call next day.
4. next day i was told to take backup on an external disk, and my system was restored, still nothing happened.
After all this mental trauma and huge loss of work and time, today i decided to connect with Microsoft people.
5. Now they asked "please ask HP for your product key" for you pre-installed windows. They should provide it"
6. the Microsoft executive checked my system for key and suggested
that the current key is only a trial version or test key and that is why this problem is persisting.
Sir/ Madam this is a new laptop, and i have been so tensed and now i am loosing patience.
Your executives give time and then they just don't call, even if they do it is not on suggested time slot.
I request you to kindly resolve this matter ASAP. Please arrange a call back today between 9 AM to 11 AM, with a senior person who can answer all queries.
An annoyed customer
Thanks and Regards,Priyanshu Jaiswal

Hi @PriyanshuJ ,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publically post ( serial numbers and case details).
If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
Regards,
George
I work for HP

ITunes Response time is very slow while downloading.

When iTunes is preforming some task it is not responsive on Windows 7.
For example: When it is downloading a program I click one of the libraries it can take up to 1 minute before that item is selected and the screen goes to that selection. It appears that the file that is downloading has to complete before it process the command.
It appears that everything that I click must wait for the download to complete before iTunes processes the click.
Even if I am in another program like "Word" and click iTunes in the Taskbar it waits until the files gets downloaded before the iTunes app comes to the forefront.
It does not matter if a device is plugged in or not.
Another sign is that progress bar (while downloading) goes to 0% to 100% with no (or maybe one or two) steps.
Shouldn't download be a background task?

I have the same issue.
along with having to hold the power OFF for an inordinate amount of time to get the "thing" to shut down.
AND, it's TOO QUIET. I have to get up and go look at the printer to see if it's doing anything at all.
Ink cartridges are OUTRAGEOUSLY priced. Stupid Me. I neglected to see how much it would cost to operate this unit. IF I had checked, I would have bought a different printer (Epson). So now I'm stuck with a new out of ink printer after 2 days of use. Over $40USD to print 200 pages (IF I'm that lucky).
There is NO setting to ignore color out notices to continue printing in B/W, so once one of the color segments runs out, the whole printer is useless.
So now I have a scanner and still need a printer.

Transformation activity very slow in Jdev.

Hi!
When I use the Transformation activity it takes for ever for Jdev to populate the two parts boxes (Source part & Target part)
Sometimes it wont even succeed.
Is this a bug in Jdev or what?
I've tried 10.1.3.3 and 10.1.3.4 - same result.
Regards, Henrik

Hmmmm....I dont think its a bug because we also use this feature quite often.
I have not faced such problems.
Is your xsd contains huge number of elements?
Cheers,
Abhi...

DDIC ACTIVATION very slow while applying SPS 7 to ECC 6.0

Similar Messages

Maybe you are looking for