DDIC job 'SAP_COLLECTOR_FOR_PERFMONITOR' fail 2 times daily

Hi Gurus,
we have an issue with DDIC job 'SAP_COLLECTOR_FOR_PERFMONITOR'.
this job daily fails at 08am and 10pm of system time throwing ST22 dump.
DDIC job log is 'Job started
Step 001 started (program RSCOLL00, variant , user ID DDIC)
Database system not supported
ABAP/4 processor: TSV_TNEW_PAGE_ALLOC_FAILED
Job cancelled
ST22 runtime Runtime error 'TSV_TNEW_PAGE_ALLOC_FAILED' occurred for users 'DDIC'.
Runtime Errors         TSV_TNEW_PAGE_ALLOC_FAILED
Date and Time          06/17/2009 20:07:11
Short text
No more storage space available for extending an internal table.
What happened?
     You attempted to extend an internal table, but the required space was
     not available.
ECC6.0,Kernel700,patch 185,oracle 10.2.0.4.0
regards
nag

Hi,
Check this note "Note 945279 - Workload Collector terminates due to memory problems"
With Regards,
Saurabh

Similar Messages

Job SAP_COLLECTOR_FOR_PERFMONITOR failing in alternate hours

Hello All,
The job SAP_COLLECTOR_FOR_PERFMONITOR in solution manager 7.1 was running fine till last week but now it is failing. Every alternate job fails.
Checked logs and it states error message:
SQL error 1-: Function sequence error
Checked system logs:
After the attempt to call a database operation, the database system has
returned the error code specified in the message, which indicates that
the operation concerned could not be executed successfully.
Can someone suggest and provide some input to correct this.
Regards,
Mohit

Hello Divyanshu,
Here is the job logs
Date       Time     Message text                                                                Message class Message no. Message type
26.08.2014 00:13:03 Job started                                                                      00           516          S
26.08.2014 00:13:03 Step 001 started (program RSCOLL00, variant , user ID SOLMAN_BTC)                00           550          S
26.08.2014 00:13:09 Clean_Plan:Bereinigung der DB13-Einplanungen                                    DB6PM         000          S
26.08.2014 00:13:09 Clean_Plan:started by RSDBPREV                       on server FR105     DB6PM         000          S
26.08.2014 00:13:09 Clean_Plan:Jobs in System ZZZ      werden bereinigt                             DB6PM         000          S
26.08.2014 00:13:09 Clean_Plan:Jobs in System BWP00002 werden bereinigt                             DB6PM         000          S
26.08.2014 00:13:09 Clean_Plan:Jobs in System BWT      werden bereinigt                             DB6PM         000          S
26.08.2014 00:13:09 Clean_Plan:Jobs in System DEV      werden bereinigt                             DB6PM         000          S
26.08.2014 00:13:09 Clean_Plan:Jobs in System KON      werden bereinigt                             DB6PM         000          S
26.08.2014 00:13:09 Clean_Plan:Jobs in System PRD      werden bereinigt                             DB6PM         000          S
26.08.2014 00:13:09 Clean_Plan:Jobs in System ZD1      werden bereinigt                             DB6PM         000          S
26.08.2014 00:13:09 Clean_Plan:Jobs in System ZD200001 werden bereinigt                             DB6PM         000          S
26.08.2014 00:13:09 Clean_Plan:Jobs in System ZE1      werden bereinigt                             DB6PM         000          S
26.08.2014 00:13:09 Clean_Plan:Jobs in System ZP1      werden bereinigt                             DB6PM         000          S
26.08.2014 00:13:09 Clean_Plan:Jobs in System ZP2      werden bereinigt                             DB6PM         000          S
26.08.2014 00:13:09 Clean_Plan:Jobs in System ZQ1      werden bereinigt                             DB6PM         000          S
26.08.2014 00:13:09 Clean_Plan:Jobs in System ZQ2      werden bereinigt                             DB6PM         000          S
26.08.2014 00:13:09 Clean_Plan:Jobs in System ZSM      werden bereinigt                             DB6PM         000          S
26.08.2014 00:13:09 Clean_Plan:finished                                                             DB6PM         000          S
26.08.2014 00:21:42 SQL error 1-: Function sequence error                                           0Q           029          E
26.08.2014 00:21:42 Job cancelled after system exception ERROR_MESSAGE                               00           564          A
werden bereinigt means: Adjusted
Regards,
Mohit

PI Job is failed many times . Job-ARV_BC_XMB_WRP20120221220050

Hi Folks,
i am facing some problem like that
PPI Job is failed after some interval to time like one week or more .
Job -ARV_BC_XMB_WRP20120221220050
job log is like that:
***********************************************************8
*Job started
Step 001 started (program RSXMB_ARCHIVE_MESSAGES,
Conflict situation: Unable to execute job
Job cancelled after system exception ERROR_MESSAGE*
Thanks
Gagandeep

Hi Sarah,
thanks for ur reply.
Could you check if any other jobs are currently running, e.g. the copy job?
yes there is one job that run at same time ie. SAP_BC_XMB_ARCHIVE001
You could also check in ST22 for the short dump that occurred at the time the job was cancelled.
But there is no dump in ST22
can u tell me how to solves these?
Regards,
Gagandeep

SAP job SAP_COLLECTOR_FOR_PERFMONITOR getting failed with abap dump LOAD_PROGRAM_NOT_FOUND

Dear Experts,
Background job SAP_COLLECTOR_FOR_PERFMONITOR getting failed with abap dump LOAD_PROGRAM_NOT_FOUND.
As it is hourly scheduled job and it gets finished 22 times in a day but other 2 times fails with abap dump.
Finished Job log
Job started
Step 001 started (program RSCOLL00, variant , user ID Bharath)
Clean_Plan:Cleanup of DB13 Plannings
Clean_Plan:started by RSDBPREV                       on server
Clean_Plan:Cleaning up jobs of system DEV
Clean_Plan:finished
Job finished
Failed Job Log
Job started
Step 001 started (program RSCOLL00, variant , user ID Bharath)
Internal session terminated with a runtime error (see ST22).
Kindly suggest on this..
Thanks,
Bharath.

Dear Divyanshu,
Our system in ERP 6.0 EHP5 with SP level 10. The ABAP Dump shows below error.
|Short text                                                                                        |
|    Program "RSORA811" not found.                                                                 |
|What happened?                                                                                    |
|    There are several possibilities:                                                              |
|                                                                                                  |
|    Error in the ABAP Application Program                                                         |
|                                                                                                  |
|    The current ABAP program "RSCOLL00" had to be terminated because it has                       |
|    come across a statement that unfortunately cannot be executed.                                |
|    or                                                                                            |
|    Error in the SAP kernel.                                                                      |
|                                                                                                  |
|    The current ABAP "RSCOLL00" program had to be terminated because the                          |
|    ABAP processor detected an internal system error.                                             |
|What can you do?                                                                                  |
|    Note down which actions and inputs caused the error.                                          |
|                                                                                                  |
|                                                                                                  |
|    To process the problem further, contact you SAP system                                        |
|    administrator.                                                                                |
|                                                                                                  |
|    Using Transaction ST22 for ABAP Dump Analysis, you can look                                   |
|    at and manage termination messages, and you can also                                          |
|    keep them for a long time.                                                                    |
|Error analysis                                                                                    |
|    On account of a branch in the program                                                         |
|    (CALL FUNCTION/DIALOG, external PERFORM, SUBMIT)                                              |
|    or a transaction call, another ABAP/4 program                                                 |
|    is to be loaded, namely "RSORA811".                                                           |
|                                                                                                  |
|    However, program "RSORA811" does not exist in the library.                                    |
|                                                                                                  |
|    Possible reasons:                                                                             |
|    a) Wrong program name specified in an external PERFORM or                                     |
|       SUBMIT or, when defining a new transaction, a new                                          |
|       dialog module or a new function module.                                                    |
|    b) Transport error                                                                            |
|Information on where terminated                                                                   |
|    Termination occurred in the ABAP program "RSCOLL00" - in                                      |
|     "LOOP_AT_SYSTEMS_AND_REPORTS".                                                               |
|    The main program was "RSCOLL00 ".                                                             |
|                                                                                                  |
|    In the source code you have the termination point in line 535                                 |
|    of the (Include) program "RSCOLL00".                                                          |
|    The program "RSCOLL00" was started as a background job.                                       |
|    Job Name....... "SAP_COLLECTOR_FOR_PERFMONITOR"                                               |
|    Job Initiator.. " bharath"                                                                       |
|    Job Number..... 18243400
Kindly check and suggest..
Thanks,
Bharath.

Internet connection failing dozens of times daily for weeks now

My computer's connection to the Airport Express base station has no problems at all. But the internet connection goes out literally dozens of times a day (at no predictable schedule); this has been happening for almost a month. I originally thought the problem was with the internet provider, but I'm now beginning to think that either my settings are wrong, or that I have a corrupt file somewhere. Here are the details:
I connect via a cable modem (Time Warner - Road Runner). I know people have had problems with Time Warner, so I assumed that was the issue; however I've had 3 service calls and they've checked signal strength inside and out, and swapped out the modem and the cables. I don't think it is simply problems in our geographic area (i.e. greater Los Angeles) due to the fact that the Internet fails sometimes 40-50 times daily, and the problem began when I upgraded from an old Airport base station to a brand new Airport Express about a month ago.
The airport/internet connection is shared 3 ways: two MacBook Pro computers and one iPhone. My Airport's internet settings are as follows:
Configure IPv4 using DHCP.
DNS Servers: 66.75.160.63 and 66.75.160.64 (note I have already tried swapping these for OpenDNS -- this did NOT solve the problem)
Domain name: socal.rr.com
DHCP Client ID: [blank]
Ethernet WAN port: Default-Automatic
Connection Sharing: Share a Public IP address
DHCP Beginning Address: 10.0.1.2
Ending Address: 10.0.1.200
DHCP Lease: 4 hours
NAT settings are all unchecked
One of the main reasons I believe that the problem is with my computer's settings or a corrupt file is that I can fix the problem whenever the Internet "goes down" almost 100% of the time by doing the following: after loading Airport Utility, I make ANY trivial change (i.e. changing the DHCP lease from 4 hours to 5 hours) and then click UPDATE to refresh the Airport base station. This fixes the problem almost 100% of the time. But then, anywhere from 10 minutes to 3 hours later, the Internet connection goes down again. [Unplugging the power from the modem, waiting 30 seconds, and plugging it back in ALSO fixes the problem almost 100% of the time, until it goes out again a little while later.]
I can't think of what else to try -- but any advice would be greatly appreciated -- it's impossible for us to work with the Internet constantly going out throughout the day, every day.
Thank you!

I had a similar issue with a local fiber provider in Loma Linda, CA. Internet connection with a new Airport Extreme was fast but with drops at regular intervals every day. Resetting the airport fixed the problem but there was one difference, even a direct connection through ethernet cord to the gateway also failed at regular intervals.
After trying everything, the problem was fixed by asking the fiber service provider to switch the port the wire from my home was connected to at a central box somewhere in my neighborhood.
Good Luck!

Exact Steps to schedule a background job a specific time daily :

Dear All,
Please let me know the whole process involved in schedule a background job a specific time daily. what is calender id. I could not understand what it has given in SM36.
Thanks in advance.
Rgds
Prem.

Hi prem
this is complte procedure for ur requirment.
Scheduling Background Jobs
Use
You can define and schedule background jobs in two ways from the Job Overview:
Directly from Transaction SM36. This is best for users already familiar with background job scheduling.
The Job Scheduling Wizard. This is best for users unfamiliar with SAP background job scheduling. To use the Job Wizard, start from Transaction SM36, and either select Goto ® Wizard version or simply use the Job Wizard button.
Procedure
Call Transaction SM36 or choose CCMS ® Jobs ® Definition .
Assign a job name. Decide on a name for the job you are defining and enter it in the Job Name field.
Set the jobu2019s priority, or "Job Class":
High priority: Class A
Medium priority: Class B
Low priority: Class C
In the Target server field, indicate whether to use system load balancing.
For the system to use system load balancing to automatically select the most efficient application server to use at the moment, leave this field empty.
To use a particular application server to run the job, enter a specific target server.
If spool requests generated by this job are to be sent to someone as email, specify the email address. Choose the Spool list recipient button.
Define when the job is to start by choosing Start Condition and completing the appropriate selections. If the job is to repeat, or be periodic, check the box at the bottom of this screen.
Define the jobu2019s steps by choosing Step, then specify the ABAP program, external command, or external program to be used for each step.
Save the fully defined job to submit it to the background processing system.
When you need to modify, reschedule, or otherwise manipulate a job after you've scheduled it the first time, you'll manage jobs from the Job Overview.
pls give points if it is usefull
Regards
Saimedha

InfoPath Forms Services Form Upgrade timer job continuously failing

Hello all,
We've recently uploaded several InfoPath form templates to our production SharePoint 2010 environment (6 server farm). One of the forms
was still stuck in 'upgrading' (even after it said successful after the upload). So we deleted that form and re -uploaded it successfully.
Since then we've been seeing the following timer job failures every minute. The forms all work but the timer job failures still keep
coming.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The Execute method of job definition Microsoft.Office.InfoPath.Server.Administration.FormsUpgradeJobDefinition (ID 6904b095-822d-4158-9572-f6b3fe8d4265)
threw an exception. More information is included below.
Object reference not set to an instance of an object.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We saw this
http://gpkarnik.wordpress.com/ looks hopeful, but we are reluctant to proceed when we read this article
http://blogs.technet.com/b/nishants/archive/2008/10/10/how-to-delete-orphan-configuration-objects-from-sharepoint-farm.aspx
We have done the following:
Reset timer service on all servers (same job just moves to a different server failing)
removed the suspect InfoPath form and re uploaded (no change)
All servers in the farm rebooted (no change)
Questions:
Can we just get rid of the failing InfoPath Forms Services Form Upgrade?
Will a new one get created the next time we upgrade a form?
Thank you,
Jim

Hi Jim,
When you upload an administrator-approved InfoPath form template to SharePoint, SharePoint automatically creates a Solution Package for it as well as a Timer Job. When a solution package is deployed in a farm, it will be restored in 14 hives.
Timer jobs are scheduled for execution, but sometimes it can take a long while before a SharePoint timer job gets executed. The timer job created by SharePoint would have a Title similar to Windows SharePoint Services Solution Deployment for “form-[your_uploaded_form_template_name].wsp”.
The Schedule Type for this timer job would be One-time.
If you want to hurry the execution of administrative timer jobs along, you can use the following stsadm command:
stsadm -o execadmsvcjobs
More information, please refer to the link:
http://www.bizsupportonline.net/blog/2008/12/infopath-form-uploaded-sharepoint-remains-stuck-installing-upgrading-status/
http://johnliu.net/blog/2013/1/8/infopath-form-stuck-on-installing-upgrading-or-deleting.html
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Job    SAP_COLLECTOR_FOR_PERFMONITOR getting delay.

Hi Friends,
In one of my customer system, the job    SAP_COLLECTOR_FOR_PERFMONITOR is getting delay on particular time.
Normally every hour it is getting finished with 5 to 40 secs.
But at a particular the job starts at i.e. 02:26am is finishing successfully but taking much time. It's nearly taking 37,000 secs.
Job log:
Job started
Step 001 started (program RSCOLL00, variant , user ID DDIC)
Job finished
My system details are:
Comp version :BBPCRM 4.0
Database system: ORACLE , 10.2.0.4.0.
Kernel release :   640
SAP_BASIS:SAPKB62063
I can submit if any information required. Earlier solution is much aspirated.
Regards
Sudhakar

Sorry Guys I was not well to answer your replies.
Thanks for your replies.
Still the issues persists. Here are some more information which would help you to help me.
I have checked BTC are available.
In SM51 one BTC is running for long time for this with a entry of u201CSAPLSTUW   000 DDICu201D
& Daily BTC process is Disconnecting from oracle at 2 Ou2019clk then this job is taking that BTC. Is there any relation between this?
Wed Oct 6 01:50:01 2010
got NLS_LANG='AMERICAN_AMERICA.UTF8' from environment
Client NLS settings:
Logon as OPS$-user to get SAPCRM's password
Connecting as /@SID on connection 1 (nls_hdl 0) ... (dbsl 640 070308)
Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
   0 UTF8                                                      1 0x114876050 0x114888db0 0x114888668
Starting user session (con_hdl=1,svchp=0x1160b89c8,srvhp=0x11488bd68,usrhp=0x1160b85b0)
Now '/@SID' is connected: con_hdl=1, nls_hdl=0, session_id=687.
Got SAPCRM's password from OPS$-user
Disconnecting from connection 1 ...
Close user session (con_hdl=1,svchp=0x1160b89c8,usrhp=0x1160b85b0)
Now I'm disconnected from ORACLE
Connecting as SAPCRM/<pwd>@SID on connection 1 (nls_hdl 0) ... (dbsl 640 070308)
Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
   0 UTF8                                                      1 0x114876050 0x114888db0 0x114888668
Starting user session (con_hdl=1,svchp=0x1160b89c8,srvhp=0x11488bd68,usrhp=0x1160b85b0)
Now 'SAPCRM/<pwd>@SID' is connected: con_hdl=1, nls_hdl=0, session_id=687.
Connection 1 opened (DBSL handle 1)
Wp Hdl ConName          ConId     ConState     TX PRM RCT TIM MAX OPT Date     Time   DBHost
134 000 R/3              000000000 ACTIVE       NO YES NO 000 255 255 20100930 152615 host05
134 001 R/3*WORKFLOWTRAC 134000057 ACTIVE       NO NO NO 004 255 255 20101006 015001 host05
ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2220]
ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2220]
ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2220]
Wed Oct 6 02:08:47 2010
Disconnecting from connection 1 ...
Close user session (con_hdl=1,svchp=0x1160b89c8,usrhp=0x1160b85b0)
Now I'm disconnected from ORACLE
Disconnected from connection con_da={R/3*WORKFLOWTRACE,134000057,1}
Job is taking much time to finish at 02:26 with a lock entry in MONI table. In ST03n sometimes 3:26 job is showing error but it is not failing.
Error log:
System name                            Host name                        Report   Date       End time
Error message
Host05_SID_00                       Host05                        RSCUECRM 06.10.2010 03:26:01
Host05_SID_00                       Host05                        RSHOSTDB 06.10.2010 03:26:01
Host05_SID_00                       Host05                        RSORACOL 06.10.2010 03:26:01
Host05_SID_00                       Host05                        RSORAHCL 06.10.2010 03:26:01
Host05_SID_00                       Host05                        RSRFCDLT 06.10.2010 03:26:01
Host05_SID_00                       Host05                        RSRFCDMN 06.10.2010 03:26:01
Host05_SID_00                       Host05                        RSSTAT60 06.10.2010 03:26:06
Table MONI is locked by user DDIC
Host05_SID_00                       Host05                        RSSTAT87 06.10.2010 03:26:06
Host05a_SID_01                      Host05a                       RSHOSTDB 06.10.2010 03:26:07
Host05a_SID_01                      Host05a                       RSRFCDMN 06.10.2010 03:26:07
Host05_SID_00                       Host05                        RSSTAT83 06.10.2010 03:26:11
Begin error recovery:
Host05_SID_00                       Host05                        RSSTAT60 06.10.2010 03:27:16
Table MONI is locked by user DDIC
Contents of TCOLL
Report      Days of Week                                   Hours of Day                                Repe-    System
                                                                                titions
         Mo    We    Fr    Su 0     2     4     6     8    10    12    14    16    18    20    22
RSCUECRM X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X     1         C
RSDBPREV X X X X X X X X     X     X     X     X     X X X     X     X     X     X     X        1         C
RSDB_PAR X X X X X X X                          X              X                 X                 1         C
RSDB_TDB X X X X X X X                       X                                      X              1         C
RSDB_WDB                    X                                      X                                      1         C
RSHOSTDB X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X     1         *
RSHOSTDC X X X X X X X X     X     X     X     X     X     X     X     X     X     X     X        1         C
RSHOSTPH X X X X X X X                             X        X                    X                 1         *
RSORA811 X X X X X X X                                      X                    X                 1         C
RSORACOL X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X     1         C
RSORAHCL X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X     1         C
RSRFCDLT X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X     1         C
RSRFCDMN X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X     1         *
RSSDBDLY X X X X X X X     X                                                                       1         C
RSSTAT60 X X X X X X X           X        X        X     X        X     X        X        X        1         C
RSSTAT83 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X     1         C
RSSTAT87 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X     1         C
RSSTAT90 X X X X X X X                                         X                 X                 1         *
RSSTAT98 X X X X X X X              X        X        X        X        X        X                 1         *
RSSTATPH X X X X X X X                             X        X                 X                    1         *
RSTUNE80 X X X X X X X                             X              X                          X     1         *
RSXRPM          X                             X                                                           1         C

Job SAP_COLLECTOR_FOR_PERFMONITOR keep on running

Dear All,
I am facing problem in prd ,we have 2 active node the job SAP_COLLECTOR_FOR_PERFMONITOR keep on running eg   44,21sec,tan I have to cancel it manual this is suddenly. this happened with not all the hourly jobs ,but only 1 or 2 time in a day a any time.
Please find the below . Please suggest how to solved it
We are using ECC6 on oracle 10g
25     BGD     1696     Running          Yes     4               2     SWNCTOTAL     000     DDIC     Insert     SWNCMONI
Sm37 log
Job started
Step 001 started (program RSCOLL00, variant , user ID DDIC)
Clean_Plan:Cleanup of DB13 Plannings
Clean_Plan:started by RSDBPREV                       on server nodea
Clean_Plan:Cleaning up jobs of system PRD
Clean_Plan:finished
Database destination not found
Cannot determine operating system data for database
kind regards,
kumar

Dear Sunny
Thanks for you suggestion , no it happened any time and there is sufficient no of background process are free
I have see it stuck in table SWNCMONI while Insert ans i have checked the snote .Please suggest
sm21 log
Time     Type Nr Clt User        TCode Priority Grp N Text
04:51:46 DIA 001 100 BASIS               AB 0 Run-time error "TIME_OUT" occurred
04:51:46 DIA 001 100 BASIS               AB 1 > Short dump "101021 045146 clusa " generated
04:51:46 DIA 001 100 BASIS               D0 1 Transaction Canceled SY 002 ( Time limit exceeded. )
05:01:04 RD                                      Q0 I Operating system call connect failed (error no. 10061)
05:01:45 RD                                      Q0 I Operating system call connect failed (error no. 10060)
05:01:45 DIA 000 100 BASIS               R4 9 Communication error, CPIC return code 017, SAP return code 236
05:01:45 DIA 000 100 BASIS               R6 4 > CPI-C function: CMINIT(SAP)
05:20:11 RD                                      Q0 I Operating system call connect failed (error no. 10060)
05:20:11 DIA 001 100 BASIS               R4 9 Communication error, CPIC return code 017, SAP return code 236
05:20:11 DIA 001 100 BASIS               R6 4 > CPI-C function: CMINIT(SAP)
05:20:24 RD                                      Q0 I Operating system call connect failed (error no. 10061)
05:21:18 RD                                      Q0 I Operating system call connect failed (error no. 10060)
05:21:18 DIA 001 100 BASIS               R4 9 Communication error, CPIC return code 017, SAP return code 236
05:21:18 DIA 001 100 BASIS               R6 4 > CPI-C function: CMINIT(SAP)
05:22:56 RD                                      Q0 I Operating system call recv failed (error no. 10054)
08:46:50 BTC 025 000 DDIC                       BY 4 Database error 24909 at UPD access to table TST01
08:46:50 BTC 025 000 DDIC                       F6 H Database error: TemSe->XRTAB(3)->1 for table TST01 key
08:46:56 RD                                      Q0 I Operating system call recv failed (error no. 10054)
08:47:11 BTC 025 000 DDIC                       F3 T Invalid object name for TemSe object: " "
08:47:13 BTC 025 000 DDIC                       EC F Failed to create log for job SAP_COLLECTOR_FOR_PERFMONITOR 19301600 %NEWSTEP/
08:47:13 BTC 025 000 DDIC                       F2 0 Calling program reports invalid handle for TemSe object (magic==X'NULL-ptr')
08:47:13 BTC 025 000 DDIC                       R4 7 Delete session 001 after error 023
09:38:51 DP                                      Q0 I Operating system call recv failed (error no. 10054)
09:38:51 DP                                      Q0 4 Connection to user 9850 ( ), terminal 90 (233 ) lost
10:00:24 RD                                      Q0 I Operating system call recv failed (error no. 10054)
10:00:24 RD                                      S2 3 Connection to CPI-C client 101 was closed
10:00:24 DIA 001 100 PORTAL                R4 9 Communication error, CPIC return code 020, SAP return code 223
10:00:24 DIA 001 100 PORTAL                R5 A > Conversation ID: 909935
10:00:24 DIA 001 100 PORTAL                R6 4 > CPI-C function: CMSEND(SAP)
10:26:36 DP                                      Q0 I Operating system call recv failed (error no. 10
and just now the sm37 log is different
Job started
Step 001 started (program RSCOLL00, variant , user ID DDIC)
Clean_Plan:Cleanup of DB13 Plannings
Clean_Plan:started by RSDBPREV                       on server
Clean_Plan:Cleaning up jobs of system PRD
Clean_Plan:finished
Database destination not found
Cannot determine operating system data for database
Buffer statistics for clusa transferred to MONI
Please suggest
Kind Regards,
Kumar
Edited by: kumar9 on Oct 21, 2010 12:30 PM
Edited by: kumar9 on Oct 21, 2010 2:37 PM

10.7.2 Lion freezing / apps lock up, must hard reset 2-3 times daily

I've seen several posts on this -- oddly, some of them are archived even though there has been no resolution...
Would love to hear people's experiences and especially if you have a fix. Would REALLY love it if Apple would get off their duff and give us a working O/S.
Ever since upgrading to Leopard I've been having problems with system stability and, specifically, with lockups. Usually this starts out with a few applications get "hung" (beach ball). Again, usually, I can force quit them, restart and continue for at least a little while... but, it always marks the beginning of a downward spiral. The final straw seems to be when Finder locks up. Once Finder locks, the system becomes unresponsive overall and I can't shut down without doing a hard reset (either cmd-opt-power or, more often, just hold power until a get a hard reboot).
Some of the behaviors I'm seeing:
Apps start to lockup. Best option at this point is to quickly shut everything down and restart. On occasion I get a software restart if I'm prompt about it.
Finder locks up... forget it. Hardware restart is in my future... will generally try to save work, but it seems that anything involving disk / file system access is completely frozen.
About one out of two times, the login screen is very slow to appear (about a 2 minute boot), and then it fails to respond to my wireless keyboard &/or mouse. Sometimes the mouse works, keyboard doesn't. If I wait for 1-2 minutes, it will usually "wake up" and suddenly gets all of the input in one blast... but usually I lose patience, open up the laptop, do another hard reset.
Sometimes the screen saver won't release control of the machine (much like login screen). I can move the mouse, tap keys, etc., screen saver just keeps right on running blithely along...
On rare occasion, even the force quit panel (cmd-opt-escape) refuses to appear.
Of late, I've taken to launching Terminal on login so that it's available (because after the lockups start, I won't be able to launch it). Then, I can issue a "shutdown -r now" which, most of the time, seems to work pretty well. I hate doing a hard reset, always worried it will lead to a damaged file structure or lost work.
I've tried a number of fixed, including (at the height of it) reinstalling 10.7.2, which I did a few days ago. It made no difference at all... Also tried resetting NVRAM, etc. About the only folklore I haven't tried yet is switching to Chrome or Firefox. A lot of people are blaming Safari for all of this, so perhaps I'll try that next...
I'm suspecting that Time Machine is making the situation worse, but turning it off (and disconnecting the drive) does NOT solve the problem. It seems to go a little longer in-between system lockups. Same symptoms... apps become unresponsive, one after the other starts to beach ball, eventually the whole system locks up... I'm wondering if it has something to do with disk access, as posted in other threads. I've been trying to minimize disk access wherever possible, for one, just plugging in my Time Machine drive about once a day, let it backup, then unplug. Not really sure if it's helping or not though.
Currently, I'm running into this on average 3 times daily (worst day was 6 times, best day was just once, yay...) Yes I've been keeping track. By my count I'm also losing up to two hours a day, because the shutdown / reboot process is so baby-sitting intensive (and I have to do it several times a day).
Very, very frustrating. This is definitely the worst O/S release Apple has ever put out there. I'd like to go back to Leopard, but worried about the downgrade... arrrgggh. (Wish Mr. Jobs was still around, somehow I think he would never have tolerated this...)

Cattus Thraex wrote:
Hm... what are the specific issues?
I launch iPhoto, use it a few times, and it hangs, requiring a restart of the iMac;
iPhoto complains that I am not connected to the Internet (when trying to display GPS data) when I am fully connected
Magic Mouse's connection drops about every 15 to 40 minutes of typing, often in this Discussion. Apple Care suggested that keeping my battery charge above 50% would solve it. It didn’t.(My batteries are Apple’s, as is the charger.);
When I return my hand to the Magic Mouse, the active window often suddenly scrolls up which looses the position of the pointer. This can cause problems in graphical apps like InDesign;
Mail's boxes display a small triangle every few days and will not send or receive, requiring Mail to be re-launched;
In Mail I cannot get pictures of people to appear in messages sent by them.
In Mail, stationery does not work properly. Neither of these two is an earth-shattering fault, but having been offered them I wasted a lot of time trying to get them to work.)
Time Machine three times over the last 1 1/2 years (OS 10.5 once and Lion twice) has complained that its HD is full when it is only ~1/2 full. A full reset on the last two did not cure it (I had not discovered Pondini's Full Reset until Lion). Pondini's symptom's and solutions did not match the error. Each time I had to erase and start again;
A couple of months ago, as a test, (after confirming my daily bootable backup of my system done by Carbon CopyCloner), I re-installed Lion from the InstallED.dmg, accepted the invitation to restore from TM, and upgraded to 7.2. All looked well except Mail displayed only the Header and first two lines of the body of messages, all the rest of the bodies were blank. Another major thing did not work after this re-installation (I can't remember the details now);
Carbon Copy Cloner can fail to find its Firewire backup HD about every 10th time (I have a daily schedule). The connections to the drive are plugged in OK but the drive is no longer mounted, whether the iMac has been restarted or woken up. CCC has been absolutely rock solid for years until Lion;
My Canon scanner (current driver, and it always worked before Lion), more times than not complains that it cannot start because it is in use elsewhere. I have to unplug its USB and re-connect.
In SystemPrefs > iCloud, a dialogue box said that Sys. Prefs. wants to use confidential info in my keychain. I press “Deny” and the box returns for ever until I force quit Sys. Prefs.
Software Update repeatedly tells me that a certain update is available but I already have installed it.
For those silly enough to install a new OS within a year of its introduction (not me: my iMac came with the wretched thing in it), some bugs can be expected, but not this many (at least in my opinion). All previous updates going back to 1997 have gone much more smoothly than Lion on my machines.
Although I am in a minority (given the huge number of sales of Lion – although MacWorld reports that sales of Lion are faltering), I am sorry to say that I have fallen out of love with Apple. I would gladly trade the elegance and the fancy features for a bit of “Works out of the box”, “It just works”, “Computing for the rest of us”.

Solution Manager 7.1 SP04 - Job SAP_COLLECTOR_FOR_PERFMONITOR

Dear Experts
I got an issue with some differences between what SolMan Setup did and SAP Note 966309 for TCOLL in SAP_BASIS 700 - 702 sais.
SolMan Setup creates the job SAP_COLLECTOR_FOR_PERFMONITOR with the following step in working client 001:
1 RSCOLL00             ABAP                             SOLMAN_BTC EN
According to SAP Note 966309, this job is supposed to run as user DDIC (or any other with same rights) in client 000. On top, there are a lot of differences between SAP Note 966309 and the content of TCOLL.
Would you change TCOLL according to this SAP Note or would you hang on what SolMan Setup did?
Thanks for short answer.
Regards, Michael

Michael,
This note is clear regarding the client and user:Note 16083 - Standard jobs, reorganization jobs
and this note is release independent.
If you check using RTCCTOOL you'll be able to see a recommendation regarding TCOLL:
7. [Note 12103 ]    Collectors and TCOLL
Description     Planning table TCOLL for SAP workload collectors for 700 (note 966309 )
Implementation Press the lights icon to get the detailed check log.
                Add missing entries to table TCOLL using ST03N > Expert Mode > Collector
                and Performance DB > Performance Monitor Collector > Execution Times.
                Schedule RSCOLL00 as an hourly batch job if not scheduled.
"schedule standard jobs" steps is required if the jobs are not scheduled already:
http://wiki.sdn.sap.com/wiki/display/SMSETUP/Basic+Configuration
"In the activities schedule Background jobs and standard jobs different jobs are scheduled. The Background job that are scheduled are jobs for the housekeeping of SAP Solution Manager. The standard jobs are the same jobs as the jobs scheduled in transaction SM36 --> u201EStandard Jobs" and schedules jobs for general SAP housekeeping. Please make sure that the jobs are not already scheduled in SM36 before executing this activity. "
Cheers,
Diego.

Job SAP_COLLECTOR_FOR_PERFMONITOR canceled

Good evening everybody,
The job SAP_COLLECTOR_FOR_PERFMONITOR is being canceled hourly with the log below:
                                                                                Date       Time     Message text                                                  Message class Message no. Message type
04.08.2009 15:30:55 Job started                                                        00           516          S
04.08.2009 15:30:55 Step 001 started (program RSCOLL00, variant , user name DDIC)      00           550          S
04.08.2009 15:30:57 ABAP/4 processor: CONVT_OVERFLOW                                   00           671          A
04.08.2009 15:30:57 Job cancelled                                                      00           518          A
The dump generated in the ST22 is CONVT_OVERFLOW
Overflow when converting from 15362394
What happened?
The current ABAP/4 program "RSHOST2M " had to be terminated because
one of the statements could not be executed.
This is probably due to an error in the ABAP/4 program.
Everyone can help me to solve this issue? Our SAP version is R/3 4.6C.
Best Regards,
Fábio Karnik Tchobnian

Dear Friend,
Thanks for your help.
I apllied the part below from the note 903220
To remove the corrupted data in table MONI:
1. Call transaction ST03
2. With Goto -> Performance database -> Contents of Database
3. Select entry you want to delete
4. Further info will be '** delete**'
5. Confirm the delete
05.08.2009 Page 2 of 2
SAP Note 903220 - Short dumps CONVT_OVERFLOW in RSHOSTDB
or RSHOST2M
A sufficient way to find out which entries to delete would be:
- check when the short dump occured first
- delete the OS entries from MONI since the day before the first
short dump occured
The job SAP_COLLECTOR_FOR_PERFFMONITOR now is not being canceled anymore , however it is happening the same dump dump from a differente program after the job is finished as the log below from the ST22
ABAP runtime errors    CONVT_OVERFLOW
       Occurred on     05.08.2009 at 15:50:38
Overflow when converting from "-3.10504e+231"
What happened?
The current ABAP/4 program "SAPLSTUW " had to be terminated because
one of the statements could not be executed.
This is probably due to an error in the ABAP/4 program.
What can you do?
Note the actions and input that caused the error.
Inform your SAP system administrator.
You can print out this message by choosing "Print". Transaction ST22
allows you to display and manage termination messages, including keeping
them beyond their normal deletion date.
Error analysis
When attempting to convert the value "-3.10504e+231",
an overflow occurred.
Do you have some advice?
Best Regards
Fábio Karnik Tchobnian:

Reporting (Project Publish) job is failing with 'The given key was not present in the dictionary'

I am using Project Server 2010 with SQL Server 2008 R2.
I have a PWA Instance which was running fine. I have a big number of projects and I do not keep site for all the projects as we do not need project site in our business.
Everything was running fine but during last few days, some of the jobs like Reporting (Project Publish) and Reporting (Project Delete) job is failing with the same error details for all the projects. I am not able to trace where the data is wrong/corrupt
and how to resolve it.
The error detail and ULS Log is given below anod I would appreciate if someone can guide me where the problem is and suggest me any solution.
QUEUE ERROR DETAIL:
General Reporting message processor failed:
ReportingProjectChangeMessageFailed (24006) - The given key was not present in the dictionary.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='4f36afe0-43dc-4143-befc-0452da416e69' QueueMessageBody='Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish'' Error='The given key was not present in the dictionary.'.
ReportingProjectChangeMessageFailed (24006) - The given key was not present in the dictionary.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='071aeb7b-540e-45fa-b40b-a94a5d2e8e04' QueueMessageBody='Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish'' Error='The given key was not present in the dictionary.'.
ReportingProjectChangeMessageFailed (24006) - The given key was not present in the dictionary.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='55445e77-51e3-40d8-a62f-e6db0b897444' QueueMessageBody='Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish'' Error='The given key was not present in the dictionary.'.
ReportingProjectChangeMessageFailed (24006) - The given key was not present in the dictionary.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='3ab5a1ba-0915-45bb-a078-4b4b7c38af51' QueueMessageBody='Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish'' Error='The given key was not present in the dictionary.'.
ReportingProjectChangeMessageFailed (24006) - The given key was not present in the dictionary.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='b27acd8f-6cde-47d4-bd53-5930e84dc940' QueueMessageBody='Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish'' Error='The given key was not present in the dictionary.'.
ReportingProjectChangeMessageFailed (24006) - The given key was not present in the dictionary.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='b7250544-2a11-4887-8dcd-378b34b33ae1' QueueMessageBody='Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish'' Error='The given key was not present in the dictionary.'.
Queue:
GeneralQueueJobFailed (26000) - ReportingProjectPublish.ReportProjectPublishMessageEx. Details: id='26000' name='GeneralQueueJobFailed' uid='0706d212-f737-43ea-b694-c420488d57bb' JobUID='ca238fcf-d91b-46d6-a9c2-15f2cc35230d' ComputerName='WebSrv1' GroupType='ReportingProjectPublish'
MessageType='ReportProjectPublishMessageEx' MessageId='1' Stage=''. For more details, check the ULS logs on machine WebSrv1 for entries with JobUID ca238fcf-d91b-46d6-a9c2-15f2cc35230d.
ULS LOG:
Timestamp              Process
TID   Area                          Category
EventID Level     Message Correlation
01/19/2015 19:05:07.44 Microsoft.Office.Project.Server (0x1D30) 0x23FC SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=117.485513497555 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:07.66 Microsoft.Office.Project.Server (0x1D30) 0x2C94 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=192.534598230475 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:08.16 Microsoft.Office.Project.Server (0x1D30) 0x1CFC SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=448.362263674397 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:08.36 Microsoft.Office.Project.Server (0x1D30) 0x17E0 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=162.22152253546 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:09.00 Microsoft.Office.Project.Server (0x1D30) 0x0898 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=557.699412860413 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:09.36 Microsoft.Office.Project.Server (0x1D30) 0x1F20 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=253.695754010613 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:09.67 Microsoft.Office.Project.Server (0x1D30) 0x0D68 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=239.76302803952 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:10.64 Microsoft.Office.Project.Server (0x1D30) 0x3324 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=973.469925841736 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:11.92 Microsoft.Office.Project.Server (0x1D30) 0x2DB8 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=1275.5063556303 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:12.96 Microsoft.Office.Project.Server (0x1D30) 0x0A1C SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=1041.55499409959 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:13.15 Microsoft.Office.Project.Server (0x1D30) 0x0518 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=133.891034879385 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:13.35 Microsoft.Office.Project.Server (0x1D30) 0x14EC SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=207.250205426327 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:14.69 Microsoft.Office.Project.Server (0x1D30) 0x10B4 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_PUBLISH_PROJECT). Execution Time=267.137845971639 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:14.93 Microsoft.Office.Project.Server (0x1D30) 0x14E0 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_PUBLISH_PROJECT). Execution Time=209.552772167485 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:16.10 Microsoft.Office.Project.Server (0x1D30) 0x2AB4 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureNoResultWithOutputParameters -- MSP_SRA_ValidateServerLevelSRA).
Execution Time=717.808222684698 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:16.67 Microsoft.Office.Project.Server (0x1D30) 0x2AB4 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (FillTypedDataSet -- MSP_SRA_GetData). Execution Time=307.24482978413 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:17.58 Microsoft.Office.Project.Server (0x1D30) 0x2AB4 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureNoResultWithOutputParameters -- MSP_SRA_ValidateServerLevelSRA).
Execution Time=123.306566048297 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:19.12 Microsoft.Office.Project.Server (0x1D30) 0x25F4 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureNoResult -- MSP_WEB_SP_QRY_CreateSavedTasksForProject). Execution
Time=111.699445284922 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:19.61 Microsoft.Office.Project.Server (0x1D30) 0x2AC8 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureNoResult -- MSP_WEB_SP_QRY_Statusing_BuildTaskHierarchy). Execution
Time=449.279962592357 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:19.79 Microsoft.Office.Project.Server (0x1D30) 0x26D0 Project Server Server-side Project Operations 8tci Monitorableser1 PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1,
PSI: [QUEUE] System.IO.FileNotFoundException: The site
http://epm.company.com/sites/Workspaces2/PROJECT_1 could not be found in the Web application SPWebApplication Name=SharePoint - 80.     at Microsoft.SharePoint.SPSite..ctor(SPFarm farm, Uri requestUri, Boolean contextSite, SPUserToken
userToken)     at Microsoft.SharePoint.SPSite..ctor(String requestUrl)     at Microsoft.Office.Project.Server.BusinessLayer.Project.OpenProjectWeb(Guid projectUid)     at Microsoft.Office.Project.Server.BusinessLayer.Project.SetPwsProperties(Guid
projectUid)     at Microsoft.Office.Project.Server.BusinessLayer.Queue.ProcessPublishMessage.ProcessMiscellaneousPublishMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:19.79 Microsoft.Office.Project.Server (0x1D30) 0x26D0 Project Server Server-side Project Operations 8tcj Monitorable PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1,
PSI: [QUEUE] MiscellaneousPublishMessage failed on project b95c52ba-bc00-4301-aab5-890d0b057c29 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:27.42 Microsoft.Office.Project.Server (0x1D30) 0x3088 Project Server Reporting atwj Monitorable Error is: ReportingProjectChangeMessageFailed. Details: Attributes: Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish' The given key was not present in the dictionary. . Standard Information: PSI Entry Point:   Project User: Domain1\User1 Correlation Id: ae078058-f794-47ca-b1ad-0834f7a07f4d PWA Site URL:
http://epm.company.com/PWA SSP Name: SharedServices1_PsiServiceApplication PSError: ReportingProjectChangeMessageFailed (24006) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:27.42 Microsoft.Office.Project.Server (0x1D30) 0x3088 Project Server Reporting atwr High PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1, PSI: [RDS] ULS
Event: ReportingProjectChangeMessageFailed was associated with exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.     at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.InitializeSprocParameterTypeData(Dictionary`2& routineParameterInfos)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal..ctor(DAL
dal, DataStoreEnum store)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.get_Reporting()     at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.GetRefreshOperationStatus(MessageAreaType
messageArea)     at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.CheckIfAllowedToProceed(ReportingBaseMessage msg, MessageContext msgContext, Group messageGroup, JobTicket jobTicket)
at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.ProjectPublishMessageProcessor.HandleMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:28.47 Microsoft.Office.Project.Server (0x1D30) 0x31F8 Project Server Reporting atwj Monitorable Error is: ReportingProjectChangeMessageFailed. Details: Attributes: Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish' The given key was not present in the dictionary. . Standard Information: PSI Entry Point:   Project User: Domain1\User1 Correlation Id: ae078058-f794-47ca-b1ad-0834f7a07f4d PWA Site URL:
http://epm.company.com/PWA SSP Name: SharedServices1_PsiServiceApplication PSError: ReportingProjectChangeMessageFailed (24006) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:28.47 Microsoft.Office.Project.Server (0x1D30) 0x31F8 Project Server Reporting atwr High PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1, PSI: [RDS] ULS
Event: ReportingProjectChangeMessageFailed was associated with exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.     at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.InitializeSprocParameterTypeData(Dictionary`2& routineParameterInfos)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal..ctor(DAL
dal, DataStoreEnum store)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.get_Reporting()     at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.GetRefreshOperationStatus(MessageAreaType
messageArea)     at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.CheckIfAllowedToProceed(ReportingBaseMessage msg, MessageContext msgContext, Group messageGroup, JobTicket jobTicket)
at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.ProjectPublishMessageProcessor.HandleMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:29.51 Microsoft.Office.Project.Server (0x1D30) 0x2B00 Project Server Reporting atwj Monitorable Error is: ReportingProjectChangeMessageFailed. Details: Attributes: Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish' The given key was not present in the dictionary. . Standard Information: PSI Entry Point:   Project User: Domain1\User1 Correlation Id: ae078058-f794-47ca-b1ad-0834f7a07f4d PWA Site URL:
http://epm.company.com/PWA SSP Name: SharedServices1_PsiServiceApplication PSError: ReportingProjectChangeMessageFailed (24006) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:29.51 Microsoft.Office.Project.Server (0x1D30) 0x2B00 Project Server Reporting atwr High PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1, PSI: [RDS] ULS
Event: ReportingProjectChangeMessageFailed was associated with exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.     at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.InitializeSprocParameterTypeData(Dictionary`2& routineParameterInfos)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal..ctor(DAL
dal, DataStoreEnum store)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.get_Reporting()     at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.GetRefreshOperationStatus(MessageAreaType
messageArea)     at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.CheckIfAllowedToProceed(ReportingBaseMessage msg, MessageContext msgContext, Group messageGroup, JobTicket jobTicket)
at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.ProjectPublishMessageProcessor.HandleMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:30.56 Microsoft.Office.Project.Server (0x1D30) 0x1D20 Project Server Reporting atwj Monitorable Error is: ReportingProjectChangeMessageFailed. Details: Attributes: Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish' The given key was not present in the dictionary. . Standard Information: PSI Entry Point:   Project User: Domain1\User1 Correlation Id: ae078058-f794-47ca-b1ad-0834f7a07f4d PWA Site URL:
http://epm.company.com/PWA SSP Name: SharedServices1_PsiServiceApplication PSError: ReportingProjectChangeMessageFailed (24006) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:30.56 Microsoft.Office.Project.Server (0x1D30) 0x1D20 Project Server Reporting atwr High PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1, PSI: [RDS] ULS
Event: ReportingProjectChangeMessageFailed was associated with exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.     at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.InitializeSprocParameterTypeData(Dictionary`2& routineParameterInfos)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal..ctor(DAL
dal, DataStoreEnum store)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.get_Reporting()     at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.GetRefreshOperationStatus(MessageAreaType
messageArea)     at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.CheckIfAllowedToProceed(ReportingBaseMessage msg, MessageContext msgContext, Group messageGroup, JobTicket jobTicket)
at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.ProjectPublishMessageProcessor.HandleMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:31.60 Microsoft.Office.Project.Server (0x1D30) 0x2170 Project Server Reporting atwj Monitorable Error is: ReportingProjectChangeMessageFailed. Details: Attributes: Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish' The given key was not present in the dictionary. . Standard Information: PSI Entry Point:   Project User: Domain1\User1 Correlation Id: ae078058-f794-47ca-b1ad-0834f7a07f4d PWA Site URL:
http://epm.company.com/PWA SSP Name: SharedServices1_PsiServiceApplication PSError: ReportingProjectChangeMessageFailed (24006) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:31.60 Microsoft.Office.Project.Server (0x1D30) 0x2170 Project Server Reporting atwr High PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1, PSI: [RDS] ULS
Event: ReportingProjectChangeMessageFailed was associated with exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.     at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.InitializeSprocParameterTypeData(Dictionary`2& routineParameterInfos)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal..ctor(DAL
dal, DataStoreEnum store)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.get_Reporting()     at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.GetRefreshOperationStatus(MessageAreaType
messageArea)     at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.CheckIfAllowedToProceed(ReportingBaseMessage msg, MessageContext msgContext, Group messageGroup, JobTicket jobTicket)
at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.ProjectPublishMessageProcessor.HandleMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:32.66 Microsoft.Office.Project.Server (0x1D30) 0x24DC Project Server Reporting atwj Critical Standard Information:PSI Entry Point:   Project User: Domain1\User1 Correlation Id: ae078058-f794-47ca-b1ad-0834f7a07f4d
PWA Site URL: http://epm.company.com/PWA SSP Name: SharedServices1_PsiServiceApplication PSError: ReportingProjectChangeMessageFailed (24006) RDS: The request to synchronize change(s) to project Project
UID='b95c52ba-bc00-4301-aab5-890d0b057c29'. PublishType='ProjectPublish' failed. Message: 'ReportingProjectChangeMessageFailed'. Message Body: The given key was not present in the dictionary. Error:(null) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:32.66 Microsoft.Office.Project.Server (0x1D30) 0x24DC Project Server Reporting atwr High PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1, PSI: [RDS] ULS
Event: ReportingProjectChangeMessageFailed was associated with exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.     at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.InitializeSprocParameterTypeData(Dictionary`2& routineParameterInfos)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal..ctor(DAL
dal, DataStoreEnum store)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.get_Reporting()     at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.GetRefreshOperationStatus(MessageAreaType
messageArea)     at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.CheckIfAllowedToProceed(ReportingBaseMessage msg, MessageContext msgContext, Group messageGroup, JobTicket jobTicket)
at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.ProjectPublishMessageProcessor.HandleMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4d

Without seeing the history, one possibility might be some corruption in the reporting database. Assuming that you are following best practices for SQL DB management, and this is not a DB neglect problem, then I would try to force a refresh to see if that
helps. You can do this by executing a custom field backup and then restore. Note: Do not do this during production hours. Let us know if that provides any therapy.
Gary Chefetz, MCITP, MCP, MVP msProjectExperts
Project and Project ServerFAQs
Project Server Help BLOG

SM:EXEC SERVICES job getting failed in Solution manager

HI All,
SM:EXEC SERVICES job getting failed in solution mnager and job log will be fowlloing:
01-31-2012 19:09:21 Job started
01-31-2012 19:09:21 Step 001 started (program RDSMOPBACK_AUTOSESSIONS_ALL, variant , user ID BASISUSER)
01-31-2012 19:09:21 MemSize Begin = 796480 Bytes
01-31-2012 19:09:21 *******************************
01-31-2012 19:09:21 MemSize Begin = 1919120 Bytes
01-31-2012 19:09:23 Solution <000000106120000> "SID..." is being edited (Operations)
01-31-2012 19:09:23 <000000106120000> "SID..."(Operations)
01-31-2012 19:09:23 "Create_Periodic_Services" uses = 0 bytes
01-31-2012 19:09:23 "Create_Periodic_Services" uses = 690 us time
01-31-2012 19:09:23 Trying to perform session EC2000000001313
01-31-2012 19:09:24 MODEL_KEY: SID Installation Number: 6 MODEL_MODE: E MODEL_VERSNR 00001 MODEL_CLASS: EWA Data Model
01-31-2012 19:09:30 Definition nicht vorhanden
01-31-2012 19:09:33 Definition nicht vorhanden
01-31-2012 19:09:45 Internal session terminated with a runtime error (see ST22)
01-31-2012 19:09:45 Job cancelled
St22 Dump:
The exception 'CX_DSVAS_API_CONTEXT_INSTANCE' was raised, but it was not caught
anywhere along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program 'SAPLDSVAS_PROC' has to be
terminated.
Please suggest how to proceed further and provide your valuble inputs
Thanks
Nekkalapu

HI Siva,
I have done the changes according the note but still same problem.
Please suggest any other ways to resolve this issue .
Advance thanks
Regards
Nekkalapu

SM:SELFDIAGNOSIS background job getting failed in Solution manager

Hi All,
SM:SELFDIAGNOSIS background job getting failed in Solution manger server :
Job Log:
2-22-2012 16:44:02 Job started                                                                                00           516          S
2-22-2012 16:44:02 Step 001 started (program RDSWP_SELF_DIAGNOSIS, variant &0000000000324, user ID BASISUSER)      00           550          S
2-22-2012 16:45:07 Internal session terminated with a runtime error (see ST22)                                     00           671          A
2-22-2012 16:45:07 Job cancelled                                                                                00           518          A
ST22: Dump:
Runtime Errors         ITAB_DUPLICATE_KEY
Date and Time          02-22-2012 16:45:07
Short text
A row with the same key already exists.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_DSWP_SD_DIAGNOSE_CONSISTENTCP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An entry was to be entered into the table
"\CLASS=CL_DSWP_SD_DIAGNOSE_CONSISTENT\METHOD=CHECK_USERS_BP\DATA=LT_USCP"
(which should have
had a unique table key (UNIQUE KEY)).
However, there already existed a line with an identical key.
The insert-operation could have ocurred as a result of an INSERT- or
MOVE command, or in conjunction with a SELECT ... INTO.
The statement "INSERT INITIAL LINE ..." cannot be used to insert several
initial lines into a table with a unique key.
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"ITAB_DUPLICATE_KEY" " "
"CL_DSWP_SD_DIAGNOSE_CONSISTENTCP" or "CL_DSWP_SD_DIAGNOSE_CONSISTENTCM00M"
"CHECK_USERS_BP"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
KIndly Suggest to resolve the above issue
Thanks
Nekkalapu

HI,
Deatils:
SAP EHP 1 for SAP Solution Manager 7.0
SAP_ABA                701          0006    SAPKA70106
SAP_BASIS              701          0006    SAPKB70106
PI_BASIS               701          0006    SAPK-70106INPIBASI
ST-PI                  2008_1_700   0002    SAPKITLRD2
CRMUIF                 500          0004    SAPK-50004INCRMUIF
SAP_BW                 701          0006    SAPKW70106
SAP_AP                 700          0019    SAPKNA7019
BBPCRM                 500          0016    SAPKU50016
BI_CONT                704          0007    SAPK-70407INBICONT
CPRXRPM                400          0016    SAPK-40016INCPRXRP
ST                     400          0024    SAPKITL434
ST-A/PI                01M_CRM570   0000         -
ST-ICO                 150_700      0009    SAPK-15079INSTPL
ST-SER                 701_2010_1   0002    SAPKITLOS2
Thanks
Nekkalapu

DDIC job 'SAP_COLLECTOR_FOR_PERFMONITOR' fail 2 times daily

Similar Messages

Maybe you are looking for