DDIF_FIELDINFO_GET origin of input help ..

I am using DDIF_FIELDINFO_GET fm to get the data browser elements info . How can i get origin of input help ..
Entry help check---.origin of input help ..
<< Removed >>
Edited by: tashvi on May 13, 2009 8:28 PM
Edited by: Rob Burbank on May 13, 2009 2:34 PM

The input help with fixed values most probably is derived from the assigned domain, where the domain has fixed values maintained, if you would like to have a check table instead, you have to assign the check table through a foreign key relationship on the field you would like to assign the check table to.
- SE11
- Change
- Place the cursor on the field you want to assign the check table to
- Klick on the key symbol above the fileds (Foreign Key)
- Put in your check table
- You can either have a key assignment proposed or put it in manually
- Activate your table
- Done
Hope that helps,
Michael

Similar Messages

Input Help from Internal table.

Hi All,
I have created a screen with fields from an internal table and I can't access the Input help calendar for dates. I would also like to access the domain values that are linked to the original transparent table for two other fields on the screen (both from the internal table in the program) when I click on the input help in the field or press F4.
Relevant assistance will be rewarded.
Thanx in advance.

HI
try like this
TYPES : BEGIN OF ST_OBJID_SH,
         OTYPE TYPE HRP1000-OTYPE,
         OBJID TYPE HRP1000-OBJID,
        END OF ST_OBJID_SH.
DATA : IT_OBJID_SH TYPE STANDARD TABLE OF ST_OBJID_SH.
DATA : WA_OBJID_SH TYPE ST_OBJID_SH.
***********SELECTION SCREEN DESIGN***********************
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
*SELECT-OPTIONS : S_OTYPE FOR HRP1001-OTYPE NO INTERVALS .
SELECT-OPTIONS : S_OBJID FOR HRP1001-OBJID NO INTERVALS .
SELECT-OPTIONS : DATE FOR SY-DATUM NO-EXTENSION OBLIGATORY.
SELECTION-SCREEN END OF BLOCK B1.
**********END OF SELECTION SCREEN DESIGN*****************
*****INITIALIZATION VENT TO ASIGN DEFAULT VALUES TO OTYPE
*INITIALIZATION.
S_OTYPE-LOW = 'D'.
S_OTYPE-SIGN = 'I'.
S_OTYPE-OPTION = 'EQ'.
APPEND S_OTYPE.
CLEAR S_OTYPE.
*************END OF EVENT INITIALIZATION*****************
*********VALIDATION FOR SCREEN FIELDS********************
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_OBJID-LOW.
IF S_OBJID IS NOT INITIAL.
    SELECT OTYPE OBJID FROM HRP1000
                 INTO TABLE IT_OBJID_SH
                 WHERE OTYPE = 'D'.
IF SY-SUBRC EQ 0.
SEARCH HELP FOR QUALIFICATION.
    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
      EXPORTING
             DDIC_STRUCTURE         = ' '
        RETFIELD               = 'OBJID'
             PVALKEY                = ' '
       DYNPPROG               = SY-REPID
       DYNPNR                 = SY-DYNNR
       DYNPROFIELD            = 'S_OBJID'
             STEPL                  = 0
             WINDOW_TITLE           =
             VALUE                  = ' '
       VALUE_ORG              = 'S'
             MULTIPLE_CHOICE        = ' '
             DISPLAY                = ' '
             CALLBACK_PROGRAM       = ' '
             CALLBACK_FORM          = ' '
             MARK_TAB               =
           IMPORTING
             USER_RESET             =
      TABLES
        VALUE_TAB              = IT_OBJID_SH
             FIELD_TAB              =
             RETURN_TAB             = RETURN_TAB
             DYNPFLD_MAPPING        =
           EXCEPTIONS
             PARAMETER_ERROR        = 1
             NO_VALUES_FOUND        = 2
             OTHERS                 = 3
    IF SY-SUBRC <> 0.
          MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                  WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ENDIF.

Adding Input Help to a Field in WebClient

Thanks Tanja for the input but I need to add input help to the u201CValueu201D field in conditions for alert rules to facilitate the input of Sold-To Party values. For example, the user can click the input help icon and that select the desired Sold-To Party from the list.
I inadvertently deleted my original posting so I am reposting again.
Thanks,
bam

Hi Corwin,
You can have Process on Value-Request on your screen where the field exist. You can use SE80 to edit the screen of the function group that table maintenance generator created.
1. Edit the screen using SE80.
2. Place a 'process on value-request' at the bottom of the flow logic.
3. Below that, put this line
field fieldname module get_help.
4. Double click on GET_HELP and create an input module pool program.
5. In this module pool, pass the values of the other fields in your screen to the function module that can provide you the list of values
6. Use function module F4IF_INT_TABLE_VALUE_REQUEST within this module pool to popup the values.
However, please keep in mind that the values from other fields on the screen are not populated in its field unless you hit enter.

Bex input help (F4) very slow response times

When running queries on some of our InfoCubes or ODSs (in 3.5 of 2004s) we are getting a very slow response when using the Input Help (F4) option. We have looked at the article the Nov/Dec 2004 BW Expert and the following SAP Notes 626887, 661251, 626887, 817335, 567746, 581802 and 748623. None of these are of much help. We did not seem to have this problem before the upgrade to 2004s.
Anyone have any other ideas? The users are wanting it fixed.

F4 help behaviour has changed in 04s 3.5 web run time.
See attached thread for a solution (not very helpful in some cases.).
/thread/263372 [original link is broken]

Error while adding a custom field with Input help via AET

Hi All,
I need to add two custom field under Service orders at Item level in component BT140I_SRVP.
One field is required to have the input search help f4 and autopopulates the second field
I am able to add one field(not requiring help) successfully through AET .
I have created one Zsearch_help in se11 and its successfully running and Autopopulating seocnd field while I am testing it
While adding second field through AET,I need to enter following details as -
field label,search relevant ,serach help etc.
When I type the name of my 'Zsearch_help' against field search help it gives me following error
'Search help is not compatible'.
Secondly,not getting getter and setter methods for the attrributes in BTAdminI.
Last,please tell me if i create zhelp and activate it,would it automatically appear in the list on AETwhile assiging it to input field?
Please help me out.Kindly be detailed as I am new to SAP CRM.
Thanks,
Shivani

The question is answered in CRM 7.0 forum:
Getting error while adding a custom field (with input help) through AET

F4 input help on Variable screen is not working on Portal

Dear Experts,
We are facing one issue when we run the WAD report on portal, variable screen gets hang after clicking on input help button (F4) for couple of variables. We are facing same issues when we run the base queries on portal. But when we run the same base queries in RSRT (Tcode) or in BEx Analyzer we are not facing this issue and able to get the input help screen with values.
I also have gone through some old posts related to such issues but didn't help much. We are already on SAP BW 7.4 SP Level 008 and for Char IO Query Filter Value setting is kept as "Values in Master Data Table" only. This is a MD IO with Compounding.
Kindly let me know if anyone has faced such issue.
Thanks in Advance,
Nilesh

Dear Martin,
There is a no long running work process in the backend and data volume is more in Master Data Table, there are around 19 Lacks records available.
For BI Java patch and defaultTrace for errors I will check it with BASIS Admin team. Unfortunately I don’t have rights to do same.
Thanks,
Nilesh

I defaulted input help field (pick list) but SAP CRM still asking for one

We are running SAP CRM 7.0.
Some fields as you know are dialog / pick list fields.
What I mean by this is they are input help fields where you
can click a little square (in sap crm 7.0) to the right of the text box
and it brings up a dialog screen of values that you can select from.
Here is an example screen shot of what I am talking about:
http://img834.imageshack.us/img834/5676/imageschak.png
So what I have done is implemented the GETTER function for this input help field so that by default it has a value.
The code is like so:
method GET_CURRENCY.
CALL METHOD SUPER->GET_CURRENCY
EXPORTING
    ATTRIBUTE_PATH = attribute_path
   ITERATOR       = iterator
RECEIVING
    VALUE          = value.
      if value eq ''.
        IF sy-langu EQ 'E'.
          VALUE = 'USD'.
        elseif sy-langu EQ 'D'.
          VALUE = 'EUR'.
        ENDIF.
      endif.
endmethod.
Here even is a link to this method that I created: Field Currency of Context Node BTADMINH - How to set default
The method works great it sets the default of the currency to say USD. When I click the create button to create an opportunity the field currency is set to USD, this is great because it makes my job easier that I dont have to click the input help button and select a currency, it is already there.
But once I click the "Save" button for an opportunity I get a small error in the error notification box that tells me I need to select a currency! But why is this happening a currency already exists? So If I click the input help (the little button) and reselect the currency value USD then save my opportunity this error goes away.
The question is why does this happen? I need it so that the default currency value is recognized by the SAP CRM system. Why do I have to go back in and re-select the currency if it is already set? Is there some sort of consistency check or something I need to do to eliminate this problem?
Here is a screen shot after creating an opportunity with the default Currency set to USD (this means I did not select USD in the dialog input help it was defaulted by the getter method:
http://img832.imageshack.us/img832/3011/enteracurrency.png
Only if I go back into edit mode and actually click the little square to bring up the dialog of values and select USD does this error go away. Why does this happen ?

I called SET_CURRENCY right after setting my value and the error is now gone.
SET_CURRENCY( EXPORTING ATTRIBUTE_PATH = ATTRIBUTE_PATH
                iterator = iterator
                value = value ).
Got the tip from Pieter who has a good blog on SAP CRM: http://sapcrmweblog.blogspot.com/

Passing parameter to an Input Help Component

Hi ,
Someone knows a way to pass parameters or any value to an Input Help Component that is built in a separate WDP application ?
Thanks in advance for your help.

Hi Baskaran,
I have a WDP component that implements "".
Then, i use it as search help (F4 function) for an input field in another WDP component.
I would like to use the same " search help component " for many input fields.
In this purpose, I would like to pass a parameter to specify the caller input field.
So, do you know a way to pass parameters to "the search help component" ?
Here is the tutorial that i followed, for the first part.
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50fd6096-a4b6-2d10-bfa8-bbd9001e0d0e?quicklink=index&overridelayout=true |http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50fd6096-a4b6-2d10-bfa8-bbd9001e0d0e?quicklink=index&overridelayout=true ]
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50fd6096-a4b6-2d10-bfa8-bbd9001e0d0e?quicklink=index&overridelayout=true

How to hide values in F4 input help

Hi firends,
I have a requirement to hide the values from F4 input help. In tcode F110, when I press F4 in Identification field then i will get the F4 help value for identification for which payment run is already done. I want to hide that data in F4 help and i don't want to delete it from table. Is it possible??
Please help me.
Thanks,
Ziad

Hi,
Please check this [Thread for your help.|Re: Regading OVS]
You can check also [This thread.|Re: Hide F4 personal value list;
Thanks,
Abhijit

System is not showing in dropdown list for input help

hi,
I am using one data service in iview and i have dragged an input form.I want to add input help in it.
Now my problem is that: When i am trying to select system for input help it is not showing any system in dropdown list.
Can anybody help me to solve this.
Thanks

Hi ,
if the System is not Mapped to VC User it will not appear in the Dropdown list.
So do the Usermapping for that system useing System alias.
Do you know how to do Usermapping?
If not get back to me.
Regards,
Govindu

Input help for a selection screen field

I have a selection screen with field species and checkoff activity .
For a given species('sc','sb' or 'ss') , the input values allowed for the
check off activity must be 'SCCK' for species 'SC' ,'SBCK' for species 'SB' and so on.
I need to provide input help for check off activity based on the value of the species.How do i do that?

PARAMETER : p_val(10) TYPE c ,
p_val2(10) TYPE c.
AT SELECTION-SCREEN on p_val.
IF p_val = 'SC'.
p_val2 = 'SCCK'.
ENDIF.

Standard input help in zreport selection screen

Hi All,
   I am having a selection sceen like S_PERNR FOR PA0001-PERNR.
   when I put f4 help then it is comming right and showing the value
of personnel number which is correct.
   But when you execute the transaction PA30 and select f4 help in
personnel number then it iscomming with window and all information
is cooming. I want to put that help on my selection screnn S_PERNR FOR PA0001-PERNR.
is it possible? Please give me the solution.
Thanks,
Rakesh

Yes, i am getting input help for position in that program also in ECC 6.0 version.
SELECT-OPTIONS:pchobjid FOR pchdy-objid_seq.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pchobjid-low.
rhx-f4-objid-low pchplvar pchotype pchobjid '' ''.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pchobjid-high.
rhx-f4-objid-high pchplvar pchotype pchobjid '' ''.
AT SELECTION-SCREEN ON pchobjid.
PERFORM check_objid_sign(rhxchk00) USING pchobjid-sign.
Which version are you working ?
Note: Plz post only one question per thread.

Problem with Input help inside an adobe interactive forms

Hi Experts,
I'm currently implementing a Webdynpro ABAP application containing a Interactive forms.
I'm using Adobe Live Cycle Designer 8.0, Acrobat reader 9.2, Internet Explorer 7.0
My problem is that when I click on the "input help" button inside the adobe form, he automatically refresh all the forms UI element with their initial values. Is-it a refresh event included when we pressed the "Input help" button or an other event? How Can I deactivate that action, event?
Because since he automatically refresh my form data I loose the context current values.
Thanks in advance,
Louis

P740741 wrote:>
> Hi Norbert,
>
> Thanks for reply, yes I use ZCI and I inserted the Webdynpro script through Utilities.
>
> Best Regards,
> Louis
strange, but you could compare the version of the zci scripting
in your form in the hierarchy tab there are variables and the ContainerFoundation_JS script --> the first line
// DO NOT MODIFY THE CODE BEYOND THIS POINT - xxxxxxxxxxxxxxxxxxxxxxxxxxx - ContainerFoundation_JS gives you the requested information about the scripting version...have a look at this version...
norbert
perhaps this note helps:
Note 999998 - Analyzing errors with Adobe Integration of Web Dynpro ABAP
--> for debugging!
A client debug function is available as of SAP NetWeaver Release 7.00 Support Package 19 (or after you implement Note 1287114) and for all Enhancement Packages. Activate this client debug function using the URL parameter "sap-wd-clientDebug=X" (attach it to the URL using "&"). You can then activate the client trace using the key combination <CTRL><ALT><SHIFT>T (move the focus to a Web Dynpro UI element, for example, to an InputField, do NOT move the focus to Adobe Reader). The system opens a new browser window with the trace output. The trace may contain an error entry ("Network Error", and so on). The URL also activates the Adobe document services (ADS) trace. The trace outputs of the ADS are copied to the generated PDF document as an attachment. Open the file "Error.pdf" of the ADS trace: Form errors (for example, script errors) are listed there.
Edited by: Norbert Prager on Oct 24, 2009 7:31 PM

Input help not showing up for columns in CATS regular application

I am using standard iView Time Entry in ESS available in EP7 ECC6.0.
the issue I am having is that there is no popup (input help) for columns 'Reason Code', 'Region' and 'OT Rsn'. But if I go into ECC6.0 t-code CAT2, the popups are available.
Any idea what may be causing this issue?
Tiberiu

Suresh is right, You need to build your own search help with above table and implement the class
ie CL_XSS_CAT_VALUE_HELP* in se24

PA30 - Personnel Number field greyed out - No input help available.

Hi Experts,
In our System in DEV, & Quality in PA30, we are unable to select employees either by directly giving the number (greyed out) or by selecting through F4 (No input help is available).
But in Production System we can directly give Pernr or select through F4.
Any body tell me what is the reason behind this.
Thanks in advance.
Samanvita.

Hi Hariprasath,
It is not the issue with NUMKR, The number Ranges are already maintained, and are defaulted in NUMKR feature.
This is showing same in DEV / QA/ Prod.
Issue is in DEV / QA, The Personnel Number Field is Greyed out, and not able to select any number.
For that we are going to PA20, open the personnel number first, and open PA30 in another window, then we are changing the data of the employee.
But we want to give Personnel Number in PA30 itself as per SAP Standard.
Any Idea, why it is like this.
Thanks,
Samanvita

DDIF_FIELDINFO_GET origin of input help ..

Similar Messages

Maybe you are looking for