DDL and DTS Connect License Activation

When i try to activate thru the activation web site i get error. is the web site down?

Thanks for the reply.
I've just checked with the folks and it seems that the server over at our end is working properly. Could you try using a different browser and temporary disable the anti-virus program to see if it helps? If this is still not working for you, please log a support ticket with our Customer Support for further assistance.

Similar Messages

  • DDL and DTS Connect License

    Is there any other way to obtain a licence, there are some people that don't have credit cards so are unable to purchase from your web site
    This is a problem for me as I have just brought a new X-Fi to replace a old Audigy 2 ZS, due to problems with Windows 7. Now I have no SPDIF pass-though except for stereo:angry: this is not good since it's a Home Theater setup.

    Thunderau wrote:
    Is there any other way to obtain a licence, there are some people that don't have credit cards so are unable to purchase from your web site
    This is a problem for me as I have just brought a new X-Fi to replace a old Audigy 2 ZS, due to problems with Windows 7. Now I have no SPDIF pass-though except for stereo:angry: this is not good since it's a Home Theater setup.
    Actual passtrough of streams is still there, meaning, if you want to watch a movie with 5. DD with decoding at your home theater decoder you DO NOT need the license at all.

  • DDL and DTS connect pack compatibility

    Does anyone know if DDL & DTS connect pack is compatible with Windows 7?
    Thanks

    I had to run the DDL pack installer in Windows Vista SP2 compatibility mode to make it install (overrides OS detection). Otherwise I have no problems with it. I don't use the Windows 7 beta drivers because they suck, use the latest official Vista drivers until Creative releases a new set and you should be [email protected]

  • Does the DDL and DTS Connect Pack work with a X-Fi Xtreme Music UAA

    ? Hello,
    hope u don't mind my English. I have learned it a long time ago, don't need it very often and the grammer was always my problem.
    I know the patch works with a X-Fi Xtreme Music, but I am not sure about the UAA (what does this mean and do I need optical or coax out). I tried the titanium pcie before but then I have the skipping/lags effect like some others with Powerdvd9 Ultra as well. It seems that there is no workaround for this. I have no problems with my old X-Fi Xtreme Audio
    Thanks in advance
    scorpie
    PS.
    Maybe there is a workaround now but I can't find something
    Some infos:
    Board Asus P5B
    2 Nvidea Gards 8800GT and 9500 GT (no SLI)
    XP 64 bit SP3
    8GIG Ram
    LG GGC-H20L

    SPDIF out has nothing to do with support. I have no idea what hte Xtreme Music UAA supports. I would imagine if it uses the DSP from the normal X-FI line, it would. If it uses the DSP from the Xtreme Audio, it won't.

  • DDL and DTS pack on Windows 8 - possible?

    I'm trying to activate DDL and DTS pack installed on Windows 8 Pro using this shortcut: 'DDL and DTS Connect License Activation'
    Program cannot open browser and hangs everytime I'm trying to activate. Firewall is deactivated.
    Help needed

    Are you using the latest versions of the DDL and DTS pack? Daniel_k included them in his pack.
    http://forums.creative.com/showthread.php?t=699146
    I have not tried them though.

  • DDL and DTS activation

    Hello. I bought sound card Creative XtremeGamer Fatalty Pro some days ago. Now I decide to activate DDL and DTS support but I don't know where is my activation code. It's missing in instalation CDs and package of card. On this package there is only S/N and thats all. Where should I find it's And my second qestion is what are requirements? for full using of DDL and DTS codecs in hardware? Should I have any special hardware or only my soundcard is enough and is neccesery to make different hardware connection to my speakers(I have analog connection)?
    Thanks for your advises.
    Marek

    You have to buy the Dolby Digital Li've and DTS Connect pack in order to get an Activation Key. Cost $4.72.
    Dolby Digital Li've and DTS Connect pack
    [url="http://buy.soundblaster.com/_creativelabsstore/cgi-bin/pd.cgi?frompage=category&page=product_detail&fromc ategory=Software&category=Software&pid=F2222DDN6Z2 H2ADDEZD">Click Here![/url]
    Message Edited by freesky on 03-27-2009 04:33 PM

  • DDL and DTS Pack

    Hello all, relati'vely new to this forum and I have a question about the above product.
    I purchased the pack a couple of days ago and all went as it should, installed, played, etc.
    Had DDL and DTS available from the start.
    Installed the newest console launcher and now all I have available is DDL.
    No icons, check boxes, nothing for DTS?
    I have installed again, re-activated and still no joy.
    Vistax64, extreme gamer, Daniel K . support pack.
    I hope someone can provide some guidance, this has become quite frustrating.
    Thanks...
    ...Solved!
    Went to registry and removed license activation, installed DDL and DTS, activated again and all is well.
    Message Edited by The on 04-25-2009 04:58 AM

    why so?
    i find it does what it suppose to do...
    would be lovely to find DTS 96/24 also available this way...

  • Cant get DTS Connect to show when I install the DD Live and DTS connect pack

    Whats up with this?
    I bought the DD Li've and DTS Connect Pack yesterday. After installing and restarting machine I go into the Creative Console Launcher and I can only see DD Li've available and not DTS Connect. My receiver send out and supports DTS fine as I been using it all the time with DTS supported video files. The only way I can get DTS now is if I disable DD Li've so it picks up the signal. I'm using Win XP Pro.
    This is what it is showing.

    Exactly the same problem for me.
    I have a SB X-Fi Titanium Fatalty pro Series PCI express withe the latest drivers? http://www.touslesdrivers.com/index....3&v_code=24368, with vista 64 bits SP.
    I also installed the 2 plugins DDL 3.00.00 and DTS connect .03.00 but i don't have the DTS choice as you could see on this printscreen ...
    [img]http//img99.imageshack.us/img99/4843/sbtit.jpg[/img]
    Thank you for help ...
    Message Edited by didierh on 05-26-2009 06:3 AM

  • I am unable to update either iTunes or iPhone or iPad or ipad2.  After timing out I am instructed to check network setting and ensure connection is active. Connection is ok, all other downloads work ok as does iTunes and sync.  Any suggestions?

    I am unable to update software for iTunes, iPhone, iPad, or iPad 2. Installation times out and recommends I check network settings and the connection is active. It is   There are no problems with other downloads/installs. iTunes, sync and devices work fine otherwise. Any suggestions?

    Could you post your diagnostics for us please?
    In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than Network connectivity tests, as per the following screenshot:
    ... and click "Next".
    When you get through to the final screen:
    ... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

  • I am trying to update my iphone to the latest software version, but am getting a message saying 'make sure your network settings are correction and your connection is active'.  i know my connection is active, so how can I fix this problem?

    I am trying to update my iphone to the latest software version, but am getting a message saying 'make sure your network settings are correction and your connection is active'.  i know my connection is active, so how can I fix this problem?

    Hi there pamela123456,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/ts1814
    -Griff W.

  • Win7/64 bit and Audition 3 license activation issue

    I saw some early discussions on other forums regarding this. Due to a mobo failure I had to rebuild my PC. Because it was an old mobo, I basically built from the ground up, now running a much faster system with the OS as noted above (Win7 Pro/64 bit sp1). I install Audition 3 (running compatibility mode to XP sp3) and activate it. Within about 3 days it pops up with a "license activation is no longer valid" error. Adobe has not been able to successfully solve the issue as after re-activating again, it will fail within a few days again.
    I did read some reports that anti-virus programs can interfere with a registry setting required for retaining activation. I do use AVG (albeit the free version), and after the latest re-install turned it off prior to re-installing Audition. I also recently downloaded a series of Win7 KB patches, some as I recall were to deal with compatibility issues. whether that will help we will see.
    I can't afford an upgrade at this time, and would like to see 3/3.0.1 remain activated.
    Thoughts? Fixes? Patches? Voodoo spells to apply?
    TIA

    @HCH_50
    I am not sure whether this will solve but you can try this
    1. repair Outlook from control pannel
    2. repair NOS from control pannel
    3. Repair Sync from NOS sync option
    4. Create new profile in Outlook
    5. Restart Pc and then try
    Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
    It will help me to serve you better !!!!!
    Thanking You

  • Dolby Digital Live and DTS Connect Pack not installing at all!!

    I have (unfortunately) a Soundblaster X-Fi X-treme audio soundcard hooked up through an optical cable to my Inspire 5.1 Digital 5700 receiver. Of course, the sound card doesn't come with a Dolby Digital decoder, so it must be purchased seperately through Creative. Well, I downloaded (and PAID FOR) the software here after viewing and MAKING SURE my f'ing card was listed: http://buy.soundblaster.com/_creativ...DDN6Z2H2ADDEZD
    However, when I go to install it the installer says "setup is unable to detect a supported product on your system" then closes. So that's fantastic. No explanations, no nothing. I have a supported card, updated drivers, but the software THAT I PURCHASED FROM CREATIVE simply is not detected. Of course, finding technical support from Creative is like finding water in the desert, so I am here. Can anyone please help me with this? I am about to call my bank and deny the $5.00 transaction if I cannot get this fixed, I've been working on it for two freaking hours now. ANY HELP is greatly appreciated.

    Well, I had a reply typed and clicked "reply" but of course it asked me to log in again and lost my response. It seems their forums are quite awful as well. Suffice it to say, my soundcard is listed here: http://buy.soundblaster.com/_creativ...DDN6Z2H2ADDEZD where I purchased the product. My receiver is capable of playing DVD's in Dolby Digital, and all modern games support it, so I was of the understanding that all I needed was this DTS encoder.
    I was quite angry when I wrote the post, as I couldn't get it to work, their tech support is abysmal (almost non-existent) and there were literally no instructions, it simply gave me the error and booted me. I have written a complaint to the better business bureau and will never again purchase another Creative product. They can $hit on consumers all they like, but consumers like me (and daniel_k it seems) will not forget so easily.

  • X-fi titanium : cannot active DD live or DTS Connect

    Hello.
    I have?a PCIe Titanium card installed on a Windows 7 (32 bits) system.
    I have installed DD li've and DTS connect but I can't activate any of those features.
    The control panel says that is because "the audio format is not supported" (losely translated from the french "Le format audio n'est pas pris en charge"), which makes absolutely no sense to me (which audio format are we talking about?)
    did anyone have this problem before or have an idea about how to solve this ?
    Thanks in advance
    sykurmoli

    Ensure that your Windows settings are set to 5., and have 'speakers' as the default output device. Also, make sure your SPDIF sampling rate is set to the default (48khz?) in the Creative console.

  • DDL or DTS = no sound out of rear speak

    I have a sb xfi plat with optical out going to a dd/dts reciever and every time i play an mp3 i only get sound out of the front speakers and not my rears, is anyone else having this issue?

    bigjohns97 wrote:
    Thank you for the responce, however with every other DDL / DTS connect (nforce2 soundstorm,?blue gears, auzentech) you could enable DDL or DTS connect and any stereo source would automatically be 5. or 6. surround sound. See below.
    MP3 source -> real ddl/dts connect sound car?-> dolby digital / dts stream -> external reciever with dolby digital dts light on +sound on all speakers
    On the sound blaster the following happens
    MP3 source ->?sb xfi plat -> dolby digital /dts stream with only 2 channels being used?-> external reciever with DD or DTS light on + sound from only front speakers.
    Are you telling me this is how?creative designed this to work because?it isn't working like?every other DDL / DTS connect card out there.
    I don't kow how and where exactly the defferences are between those solutions. But as I told it, it is the way the Creative implemention handles it. If you don't use CMSS-3D or use the surround functions of you Decoder (I have a seperate balance for "surround" on my Z-5500 where I can set If the rear speaker are used *at all*) you won't get automaticly Surround Sound with MP3. Of course it still depends a bit on you player software, there are player/filters (AC3 Filter; ffdshow) out there which can do that too. Upmixing Stuff, I mean but then you don't really need DDL. I use it to encode actual game sounds, because strangely I don't have any popping and noise in there while I use it (just read up that crackling/popping thread.

  • Recently purchased DTS connect and DDL stuttering

    I recently purchased the DTS connect and Doby Digital Li've everything worked great at first,but than I noticed it started to stutter and drop for or 2 seconds the sound after a few minute of media playback.
    System Spec:
    ?Asus P5K, Intel Q6600, 4GB ram, SB XFi Xtreme Music, AMD 4870 52MB, Enermax Infinti 650W PS, 20GB WD Raptor, 320GB Seagate 7200.0, TB Samsung F
    OS Running:? Windows Server 2K8 x64
    Drivers side::
    Intel chipset 8.6..00
    AMD Catalyst 9.3
    SB XFi? 2.8.0008.9

    Hopefully they give us an update for DTS connect or a better driver update for x64 base OS soon, that resolve this issue? Creative should make their driver apps for x64 OS base run full nati've 64 bit, see if this resolve some of their 4GB and higher [email protected]

Maybe you are looking for