DDL and DTS connect pack compatibility

Does anyone know if DDL & DTS connect pack is compatible with Windows 7?
Thanks

I had to run the DDL pack installer in Windows Vista SP2 compatibility mode to make it install (overrides OS detection). Otherwise I have no problems with it. I don't use the Windows 7 beta drivers because they suck, use the latest official Vista drivers until Creative releases a new set and you should be [email protected]

Similar Messages

  • Does the DDL and DTS Connect Pack work with a X-Fi Xtreme Music UAA

    ? Hello,
    hope u don't mind my English. I have learned it a long time ago, don't need it very often and the grammer was always my problem.
    I know the patch works with a X-Fi Xtreme Music, but I am not sure about the UAA (what does this mean and do I need optical or coax out). I tried the titanium pcie before but then I have the skipping/lags effect like some others with Powerdvd9 Ultra as well. It seems that there is no workaround for this. I have no problems with my old X-Fi Xtreme Audio
    Thanks in advance
    scorpie
    PS.
    Maybe there is a workaround now but I can't find something
    Some infos:
    Board Asus P5B
    2 Nvidea Gards 8800GT and 9500 GT (no SLI)
    XP 64 bit SP3
    8GIG Ram
    LG GGC-H20L

    SPDIF out has nothing to do with support. I have no idea what hte Xtreme Music UAA supports. I would imagine if it uses the DSP from the normal X-FI line, it would. If it uses the DSP from the Xtreme Audio, it won't.

  • Cant get DTS Connect to show when I install the DD Live and DTS connect pack

    Whats up with this?
    I bought the DD Li've and DTS Connect Pack yesterday. After installing and restarting machine I go into the Creative Console Launcher and I can only see DD Li've available and not DTS Connect. My receiver send out and supports DTS fine as I been using it all the time with DTS supported video files. The only way I can get DTS now is if I disable DD Li've so it picks up the signal. I'm using Win XP Pro.
    This is what it is showing.

    Exactly the same problem for me.
    I have a SB X-Fi Titanium Fatalty pro Series PCI express withe the latest drivers? http://www.touslesdrivers.com/index....3&v_code=24368, with vista 64 bits SP.
    I also installed the 2 plugins DDL 3.00.00 and DTS connect .03.00 but i don't have the DTS choice as you could see on this printscreen ...
    [img]http//img99.imageshack.us/img99/4843/sbtit.jpg[/img]
    Thank you for help ...
    Message Edited by didierh on 05-26-2009 06:3 AM

  • Dolby Digital Live and DTS Connect Pack not installing at all!!

    I have (unfortunately) a Soundblaster X-Fi X-treme audio soundcard hooked up through an optical cable to my Inspire 5.1 Digital 5700 receiver. Of course, the sound card doesn't come with a Dolby Digital decoder, so it must be purchased seperately through Creative. Well, I downloaded (and PAID FOR) the software here after viewing and MAKING SURE my f'ing card was listed: http://buy.soundblaster.com/_creativ...DDN6Z2H2ADDEZD
    However, when I go to install it the installer says "setup is unable to detect a supported product on your system" then closes. So that's fantastic. No explanations, no nothing. I have a supported card, updated drivers, but the software THAT I PURCHASED FROM CREATIVE simply is not detected. Of course, finding technical support from Creative is like finding water in the desert, so I am here. Can anyone please help me with this? I am about to call my bank and deny the $5.00 transaction if I cannot get this fixed, I've been working on it for two freaking hours now. ANY HELP is greatly appreciated.

    Well, I had a reply typed and clicked "reply" but of course it asked me to log in again and lost my response. It seems their forums are quite awful as well. Suffice it to say, my soundcard is listed here: http://buy.soundblaster.com/_creativ...DDN6Z2H2ADDEZD where I purchased the product. My receiver is capable of playing DVD's in Dolby Digital, and all modern games support it, so I was of the understanding that all I needed was this DTS encoder.
    I was quite angry when I wrote the post, as I couldn't get it to work, their tech support is abysmal (almost non-existent) and there were literally no instructions, it simply gave me the error and booted me. I have written a complaint to the better business bureau and will never again purchase another Creative product. They can $hit on consumers all they like, but consumers like me (and daniel_k it seems) will not forget so easily.

  • DDL and DTS Connect License Activation

    When i try to activate thru the activation web site i get error. is the web site down?

    Thanks for the reply.
    I've just checked with the folks and it seems that the server over at our end is working properly. Could you try using a different browser and temporary disable the anti-virus program to see if it helps? If this is still not working for you, please log a support ticket with our Customer Support for further assistance.

  • DDL and DTS Connect License

    Is there any other way to obtain a licence, there are some people that don't have credit cards so are unable to purchase from your web site
    This is a problem for me as I have just brought a new X-Fi to replace a old Audigy 2 ZS, due to problems with Windows 7. Now I have no SPDIF pass-though except for stereo:angry: this is not good since it's a Home Theater setup.

    Thunderau wrote:
    Is there any other way to obtain a licence, there are some people that don't have credit cards so are unable to purchase from your web site
    This is a problem for me as I have just brought a new X-Fi to replace a old Audigy 2 ZS, due to problems with Windows 7. Now I have no SPDIF pass-though except for stereo:angry: this is not good since it's a Home Theater setup.
    Actual passtrough of streams is still there, meaning, if you want to watch a movie with 5. DD with decoding at your home theater decoder you DO NOT need the license at all.

  • DDL and DTS pack on Windows 8 - possible?

    I'm trying to activate DDL and DTS pack installed on Windows 8 Pro using this shortcut: 'DDL and DTS Connect License Activation'
    Program cannot open browser and hangs everytime I'm trying to activate. Firewall is deactivated.
    Help needed

    Are you using the latest versions of the DDL and DTS pack? Daniel_k included them in his pack.
    http://forums.creative.com/showthread.php?t=699146
    I have not tried them though.

  • DDL and DTS activation

    Hello. I bought sound card Creative XtremeGamer Fatalty Pro some days ago. Now I decide to activate DDL and DTS support but I don't know where is my activation code. It's missing in instalation CDs and package of card. On this package there is only S/N and thats all. Where should I find it's And my second qestion is what are requirements? for full using of DDL and DTS codecs in hardware? Should I have any special hardware or only my soundcard is enough and is neccesery to make different hardware connection to my speakers(I have analog connection)?
    Thanks for your advises.
    Marek

    You have to buy the Dolby Digital Li've and DTS Connect pack in order to get an Activation Key. Cost $4.72.
    Dolby Digital Li've and DTS Connect pack
    [url="http://buy.soundblaster.com/_creativelabsstore/cgi-bin/pd.cgi?frompage=category&page=product_detail&fromc ategory=Software&category=Software&pid=F2222DDN6Z2 H2ADDEZD">Click Here![/url]
    Message Edited by freesky on 03-27-2009 04:33 PM

  • DDL and DTS Pack

    Hello all, relati'vely new to this forum and I have a question about the above product.
    I purchased the pack a couple of days ago and all went as it should, installed, played, etc.
    Had DDL and DTS available from the start.
    Installed the newest console launcher and now all I have available is DDL.
    No icons, check boxes, nothing for DTS?
    I have installed again, re-activated and still no joy.
    Vistax64, extreme gamer, Daniel K . support pack.
    I hope someone can provide some guidance, this has become quite frustrating.
    Thanks...
    ...Solved!
    Went to registry and removed license activation, installed DDL and DTS, activated again and all is well.
    Message Edited by The on 04-25-2009 04:58 AM

    why so?
    i find it does what it suppose to do...
    would be lovely to find DTS 96/24 also available this way...

  • LabView 5.1 and Database Connectivity Toolkit Compatibility?

    I am looking to serve some data from a LabView 5.1 application up to an Oracle 8i database. I have looked at the current Database Connectivity Toolkit (which uses ADO technology), but am not sure if this will be compatible with LabView 5.1... is it? If not, what are my alternatives? Are older versions of this toolkit available?
    Thanks!

    Also, could someone touch on how forward compatible LabView applications are? In this scenario, I have the same 5.1 application which now requires some database connectivity. Since the SQL Toolkit is no longer supported, I would be left with upgrading LabView to 7.0 and using the Database Connectivity Toolkit. How well (in general) do earlier LabView applications convert to newer versions?
    Thanks again!

  • Exchange and UAG service pack compatibility

    We are currently on Exchange 2010 SP2 and UAG 2010 SP1.  I want to upgrade Exchange to SP3, and later on UAG to SP4, but not all at the same time due to scheduling.  Ideally we'd like to do Exchange first, then a week later update UAG.  Will
    Exchange 2010 SP3 be supported (function) on UAG SP1?  Should we update UAG to SP4 first, then later update Exchange 2010 to SP3 later?

    Hi,
    Base on my experience, there were no release notes regarding both the two products compatibility issues.
    You can upgrade the exchange first.
    Good luck!
    Thanks.
    Niko Cheng
    TechNet Community Support

  • DTS-Connect pack x-fi extreme mu

    In the latest driver release there was promised that we could buy a license for dts encoding.
    After more then a week there is still no option to buy this license. Why does creative continue to deli'ver
    promises it can't keep up with? Is that so difficult. Let's see how many of you are willing to pay for this license
    and that we want it soon! All please react perhabs we can draw some attention instead of ignorring us!
    I want creative to keep his promises!!

    I noticed that ofcourse but i think a topic specific on the dtc would perhabs draw more attention from the
    creative forum team. We have to make clear we do not accept false promisses again!

  • No "enable dts connect" on voume panel

    hi
    this is a relati'vely simple query but it's been bugging me for a while and wanted to know if there's a fix
    i have a X-Fi Titanium. i installedthe DTS connect pack. now on right-click of the volume panel there is the option to "enable dolby digital li've" along with "enable cmss" etc which can be checked to turn the features on.
    i wanted to know why the same option for "DTS Connect" isnt available and if there is a way to turn it on
    thank you. greatly appreciate any help

    under Windows 7, at least you have to install DTS and Dolby under compatibility mode in order for it to install and register properly. Can you download then newest version, then before installing, remove the old one, reboot install the newer and if you are using windows 7, install it in compatibility mode?
    Mine showed up in Creative AutoUpdate but failed to install. I set it to compatibility mode and it worked fine.

  • DDL or DTS = no sound out of rear speak

    I have a sb xfi plat with optical out going to a dd/dts reciever and every time i play an mp3 i only get sound out of the front speakers and not my rears, is anyone else having this issue?

    bigjohns97 wrote:
    Thank you for the responce, however with every other DDL / DTS connect (nforce2 soundstorm,?blue gears, auzentech) you could enable DDL or DTS connect and any stereo source would automatically be 5. or 6. surround sound. See below.
    MP3 source -> real ddl/dts connect sound car?-> dolby digital / dts stream -> external reciever with dolby digital dts light on +sound on all speakers
    On the sound blaster the following happens
    MP3 source ->?sb xfi plat -> dolby digital /dts stream with only 2 channels being used?-> external reciever with DD or DTS light on + sound from only front speakers.
    Are you telling me this is how?creative designed this to work because?it isn't working like?every other DDL / DTS connect card out there.
    I don't kow how and where exactly the defferences are between those solutions. But as I told it, it is the way the Creative implemention handles it. If you don't use CMSS-3D or use the surround functions of you Decoder (I have a seperate balance for "surround" on my Z-5500 where I can set If the rear speaker are used *at all*) you won't get automaticly Surround Sound with MP3. Of course it still depends a bit on you player software, there are player/filters (AC3 Filter; ffdshow) out there which can do that too. Upmixing Stuff, I mean but then you don't really need DDL. I use it to encode actual game sounds, because strangely I don't have any popping and noise in there while I use it (just read up that crackling/popping thread.

  • X-fi titanium : cannot active DD live or DTS Connect

    Hello.
    I have?a PCIe Titanium card installed on a Windows 7 (32 bits) system.
    I have installed DD li've and DTS connect but I can't activate any of those features.
    The control panel says that is because "the audio format is not supported" (losely translated from the french "Le format audio n'est pas pris en charge"), which makes absolutely no sense to me (which audio format are we talking about?)
    did anyone have this problem before or have an idea about how to solve this ?
    Thanks in advance
    sykurmoli

    Ensure that your Windows settings are set to 5., and have 'speakers' as the default output device. Also, make sure your SPDIF sampling rate is set to the default (48khz?) in the Creative console.

Maybe you are looking for