DDL and DTS pack on Windows 8 - possible?
I'm trying to activate DDL and DTS pack installed on Windows 8 Pro using this shortcut: 'DDL and DTS Connect License Activation'
Program cannot open browser and hangs everytime I'm trying to activate. Firewall is deactivated.
Help needed
Are you using the latest versions of the DDL and DTS pack? Daniel_k included them in his pack.
http://forums.creative.com/showthread.php?t=699146
I have not tried them though.
Similar Messages
-
Hello all, relati'vely new to this forum and I have a question about the above product.
I purchased the pack a couple of days ago and all went as it should, installed, played, etc.
Had DDL and DTS available from the start.
Installed the newest console launcher and now all I have available is DDL.
No icons, check boxes, nothing for DTS?
I have installed again, re-activated and still no joy.
Vistax64, extreme gamer, Daniel K . support pack.
I hope someone can provide some guidance, this has become quite frustrating.
Thanks...
...Solved!
Went to registry and removed license activation, installed DDL and DTS, activated again and all is well.
Message Edited by The on 04-25-2009 04:58 AMwhy so?
i find it does what it suppose to do...
would be lovely to find DTS 96/24 also available this way... -
Hello. I bought sound card Creative XtremeGamer Fatalty Pro some days ago. Now I decide to activate DDL and DTS support but I don't know where is my activation code. It's missing in instalation CDs and package of card. On this package there is only S/N and thats all. Where should I find it's And my second qestion is what are requirements? for full using of DDL and DTS codecs in hardware? Should I have any special hardware or only my soundcard is enough and is neccesery to make different hardware connection to my speakers(I have analog connection)?
Thanks for your advises.
MarekYou have to buy the Dolby Digital Li've and DTS Connect pack in order to get an Activation Key. Cost $4.72.
Dolby Digital Li've and DTS Connect pack
[url="http://buy.soundblaster.com/_creativelabsstore/cgi-bin/pd.cgi?frompage=category&page=product_detail&fromc ategory=Software&category=Software&pid=F2222DDN6Z2 H2ADDEZD">Click Here![/url]
Message Edited by freesky on 03-27-2009 04:33 PM -
DDL and DTS connect pack compatibility
Does anyone know if DDL & DTS connect pack is compatible with Windows 7?
ThanksI had to run the DDL pack installer in Windows Vista SP2 compatibility mode to make it install (overrides OS detection). Otherwise I have no problems with it. I don't use the Windows 7 beta drivers because they suck, use the latest official Vista drivers until Creative releases a new set and you should be [email protected]
-
Does the DDL and DTS Connect Pack work with a X-Fi Xtreme Music UAA
? Hello,
hope u don't mind my English. I have learned it a long time ago, don't need it very often and the grammer was always my problem.
I know the patch works with a X-Fi Xtreme Music, but I am not sure about the UAA (what does this mean and do I need optical or coax out). I tried the titanium pcie before but then I have the skipping/lags effect like some others with Powerdvd9 Ultra as well. It seems that there is no workaround for this. I have no problems with my old X-Fi Xtreme Audio
Thanks in advance
scorpie
PS.
Maybe there is a workaround now but I can't find something
Some infos:
Board Asus P5B
2 Nvidea Gards 8800GT and 9500 GT (no SLI)
XP 64 bit SP3
8GIG Ram
LG GGC-H20LSPDIF out has nothing to do with support. I have no idea what hte Xtreme Music UAA supports. I would imagine if it uses the DSP from the normal X-FI line, it would. If it uses the DSP from the Xtreme Audio, it won't.
-
Sound Blaster Fatal1ty Chapionship and Z-5500 With Dolby And DTS Pack.
. I cant get the encoder to work on the program all I get is format is not supported. Im using a optical cable and Its driving me insane. Any help would be great. As you can tell what I have going on here on the screen shot but hell... I cant get dolby or DTS to work keeps giving me that message. <img border="0" width="799" src="http://i9.photobucket.com/albums/a90/bravounit9/Untitled-.jpg" height="653" align="bottom">@75.8.77.249
J. Ok so I got it all working..... But if it can only be played at 48khz I thaugh 92khz is better. Cause I notice when I went from prologic 2 to just optical Digital I dont see that number on my uppper right pud it doesnt say on there 96khz anymore.... :\ So what is 48khz suppose to be better? By the way thanks for all the help also. You guys been helpful.. Just like to know more. Im new to this whole dolby digital. My first speakers that are Dolby Digital. Never hade Dolby Digital speakers [email protected]
-
Is there any other way to obtain a licence, there are some people that don't have credit cards so are unable to purchase from your web site
This is a problem for me as I have just brought a new X-Fi to replace a old Audigy 2 ZS, due to problems with Windows 7. Now I have no SPDIF pass-though except for stereo:angry: this is not good since it's a Home Theater setup.Thunderau wrote:
Is there any other way to obtain a licence, there are some people that don't have credit cards so are unable to purchase from your web site
This is a problem for me as I have just brought a new X-Fi to replace a old Audigy 2 ZS, due to problems with Windows 7. Now I have no SPDIF pass-though except for stereo:angry: this is not good since it's a Home Theater setup.
Actual passtrough of streams is still there, meaning, if you want to watch a movie with 5. DD with decoding at your home theater decoder you DO NOT need the license at all. -
DDL and DTS Connect License Activation
When i try to activate thru the activation web site i get error. is the web site down?
Thanks for the reply.
I've just checked with the folks and it seems that the server over at our end is working properly. Could you try using a different browser and temporary disable the anti-virus program to see if it helps? If this is still not working for you, please log a support ticket with our Customer Support for further assistance. -
Cant get DTS Connect to show when I install the DD Live and DTS connect pack
Whats up with this?
I bought the DD Li've and DTS Connect Pack yesterday. After installing and restarting machine I go into the Creative Console Launcher and I can only see DD Li've available and not DTS Connect. My receiver send out and supports DTS fine as I been using it all the time with DTS supported video files. The only way I can get DTS now is if I disable DD Li've so it picks up the signal. I'm using Win XP Pro.
This is what it is showing.Exactly the same problem for me.
I have a SB X-Fi Titanium Fatalty pro Series PCI express withe the latest drivers? http://www.touslesdrivers.com/index....3&v_code=24368, with vista 64 bits SP.
I also installed the 2 plugins DDL 3.00.00 and DTS connect .03.00 but i don't have the DTS choice as you could see on this printscreen ...
[img]http//img99.imageshack.us/img99/4843/sbtit.jpg[/img]
Thank you for help ...
Message Edited by didierh on 05-26-2009 06:3 AM -
Insert new user column in pick and pack manager window
Hi all,
Exist a way to insert new column in pick and pack manager window?
I try by code too but i can´t. Is possible to do this?
Thank you all again.
Regards.Hi Aitor,
Unfortunately, I don't think it is possible to add columns to this particular window. I had a requirement to do this a while back in SBO 2005A SP1 and I ended up designing my own pick and pack window.
Kind Regards,
Owen -
ORADC problem on Windows 2000 with Service pack 1 and service pack 2
Hi,
I have a VB application running on NT4.0 workstations. It uses
ORADC control to talk to ORACLE 7.3 When I load it on Windows
2000 with service pack 1 or service pack 2, I encounter some
problems.
The ORADC control is used in most of the VB forms and the
Refresh method of the ORADC conrol is used to refresh the APEX
TRUE DBGRID PRO control. When this action is executed, I receive
a run time error
"Method Refresh of object '_DORADC' failed Err#: -2147417848
It works fine when no service pack is applied on Win2K.
Can anyone tell me what's going on?
Thankssatheesh_p wrote:
Thanks for your reply.
When I checked the system requirements. I couldn't find information on windows 2003 service pack 2
link http://www.adobe.com/products/coldfusion/systemreqs/.
Whether your OS is windows 2003 with service pack 2?
Are you sure coldfusion 8 will work on windows 2003 with service pack 2?
Regards,
Satheesh.
Well it was there, if you understand the naming properly:
ColdFusion 8 system requirements
Windows
Intel® Pentium® II or AMD Athlon processor
Microsoft®
Windows® 2000 Professional with Service Pack 3; Windows 2000 Server,
Advanced Server, or Datacenter Server with Service Pack 3; Windows
Server® 2003 Web, Standard, or Enterprise Edition with Service Pack 1
and R2; Windows Server® 2008; Windows XP Professional or Home Edition;
or Windows Vista®
R2 is the "offical" Microsoft name for service pack 2. -
Just bought a new ipod touch for my daughter. It won't sync without itunes 10.5.2 loaded on our computer (a 2005 HP with Windows XP and service pack 2.) When I've tried to load 10.5.2, I get an error message box stating there is a problem with my Windows installer. I've tried loading the windows installer hot fix KB942288-v3-x86, but it didn't help. Any suggestion?
Hi Lorheak,
thanks for the quick reply. I had the same idea already yesterday. I use Norton Internet Security for a long time now without any problems. I think this a Apple or Microsoft problem, because the popup window which appear come from Windows DEP. I got no message from the firewall with any problem. I check the log files from Norton and Windows already but find nothing. This is a very strange problem. In the past I have had a lot of other problems with iTunes upgrades. Everytime I accept the installation of the newest version I got errors regarding missing "msi" files.
Greetings Gert -
Please a simple problem but I don't know how to solve it. After installing 16 gb of ram all is good but when I turn on the computer it is a window signaling that all is correct. How is possible to delete once and for all that window? Thank you
Well then maybe you could take a screenshot because the appearance of such a window is news to me.
Also post your OS X version and what model Mac you have. The more detail, the better. Thanks.
To take a screenshot hold ⌘ Shift 4 to create a selection crosshair. Click and hold while you drag the crosshair over the area you wish to capture and then release the mouse or trackpad. You will hear a "camera shutter" sound. This will deposit a screenshot on your Desktop.
If you can't find it on your Desktop look in your Documents or Downloads folder.
When you post your response, click the "camera" icon above the text field:
This will display a dialog box which enables you to choose the screenshot file (remember it's on your Desktop) and click the Insert Image button.
⌘ Shift 4 and then pressing the space bar captures the frontmost window.
⌘ Shift 3 captures the entire screen.
Drag the screenshot to the Trash after you post your reply. -
Hi, I have bought Photoshop and Premiere Elements for windows, but I now have a iMac and would like to deactivate on the PC and transfer the programs to the iMac. Is that possible even do I bought it for Windows?
Normally an Elements purchase is good for both platforms. You should only need to download and install the Mac versions of the programs and install and activate them using the serial number you have from the opriginal purchase.
-
Cannot download iTunes to PC with Windows XP and service pack 3. When I hit "download now" it goes stright to the "thanks for downloading" screen but downloads nothing.
I can't answer that. I'm just a user. Apple makes it decisions and does not share that with anyone here as you well know. Apple has also stopped supporting syncing contacts and calendar with the latest version of OS X, Mavericks. Users have to use iCloud. Many are not happy about that. Let Apple know how you feel here: www.apple.com/feedback and click on the appropriate link.
Maybe you are looking for
-
Multiple users on one mac mini server?
We're four ios developers looking for the cheapest mac setup, so can we just buy one mac mini server and four displays and use it sumalteneously for xcode development??
-
Just recently my Iphone 5 battery is dying in a just a few hours, it used to last all day or more. I'm not doing anything different with it, although I have started shutting down apps etc. to conserve battery. I get constant "message send failures
-
Linksys EA3500 cannot find username and password
I have tried everything for hours today and nothing works. I have tried the admin and blank approach, I have tried using my router name and password when you 1st connect and got nothing.I have held the reset button for a minute straight to try and re
-
Error getting response from Webservice
Hi I created a webservice from a WSDL file and deployed it to my weblogic 10.3 Now when I invoke the webservice from my weblogic test client, I get the following as the response. *<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">*
-
LE unexpectedly quits when opening song files after Security Update
hi! Logic Express newbie here. I have just finished mixing a 7 song project but when i try to open the song/session files files from my external 400GB FireWire drive - LE stalls for a while then unexpectedly quits. this did not happen, of course, bef