DDL and DTS Pack

Hello all, relati'vely new to this forum and I have a question about the above product.
I purchased the pack a couple of days ago and all went as it should, installed, played, etc.
Had DDL and DTS available from the start.
Installed the newest console launcher and now all I have available is DDL.
No icons, check boxes, nothing for DTS?
I have installed again, re-activated and still no joy.
Vistax64, extreme gamer, Daniel K . support pack.
I hope someone can provide some guidance, this has become quite frustrating.
Thanks...
...Solved!
Went to registry and removed license activation, installed DDL and DTS, activated again and all is well.
Message Edited by The on 04-25-2009 04:58 AM

why so?
i find it does what it suppose to do...
would be lovely to find DTS 96/24 also available this way...

Similar Messages

  • DDL and DTS pack on Windows 8 - possible?

    I'm trying to activate DDL and DTS pack installed on Windows 8 Pro using this shortcut: 'DDL and DTS Connect License Activation'
    Program cannot open browser and hangs everytime I'm trying to activate. Firewall is deactivated.
    Help needed

    Are you using the latest versions of the DDL and DTS pack? Daniel_k included them in his pack.
    http://forums.creative.com/showthread.php?t=699146
    I have not tried them though.

  • DDL and DTS activation

    Hello. I bought sound card Creative XtremeGamer Fatalty Pro some days ago. Now I decide to activate DDL and DTS support but I don't know where is my activation code. It's missing in instalation CDs and package of card. On this package there is only S/N and thats all. Where should I find it's And my second qestion is what are requirements? for full using of DDL and DTS codecs in hardware? Should I have any special hardware or only my soundcard is enough and is neccesery to make different hardware connection to my speakers(I have analog connection)?
    Thanks for your advises.
    Marek

    You have to buy the Dolby Digital Li've and DTS Connect pack in order to get an Activation Key. Cost $4.72.
    Dolby Digital Li've and DTS Connect pack
    [url="http://buy.soundblaster.com/_creativelabsstore/cgi-bin/pd.cgi?frompage=category&page=product_detail&fromc ategory=Software&category=Software&pid=F2222DDN6Z2 H2ADDEZD">Click Here![/url]
    Message Edited by freesky on 03-27-2009 04:33 PM

  • DDL and DTS connect pack compatibility

    Does anyone know if DDL & DTS connect pack is compatible with Windows 7?
    Thanks

    I had to run the DDL pack installer in Windows Vista SP2 compatibility mode to make it install (overrides OS detection). Otherwise I have no problems with it. I don't use the Windows 7 beta drivers because they suck, use the latest official Vista drivers until Creative releases a new set and you should be [email protected]

  • Does the DDL and DTS Connect Pack work with a X-Fi Xtreme Music UAA

    ? Hello,
    hope u don't mind my English. I have learned it a long time ago, don't need it very often and the grammer was always my problem.
    I know the patch works with a X-Fi Xtreme Music, but I am not sure about the UAA (what does this mean and do I need optical or coax out). I tried the titanium pcie before but then I have the skipping/lags effect like some others with Powerdvd9 Ultra as well. It seems that there is no workaround for this. I have no problems with my old X-Fi Xtreme Audio
    Thanks in advance
    scorpie
    PS.
    Maybe there is a workaround now but I can't find something
    Some infos:
    Board Asus P5B
    2 Nvidea Gards 8800GT and 9500 GT (no SLI)
    XP 64 bit SP3
    8GIG Ram
    LG GGC-H20L

    SPDIF out has nothing to do with support. I have no idea what hte Xtreme Music UAA supports. I would imagine if it uses the DSP from the normal X-FI line, it would. If it uses the DSP from the Xtreme Audio, it won't.

  • Sound Blaster Fatal1ty Chapionship and Z-5500 With Dolby And DTS Pack.

    . I cant get the encoder to work on the program all I get is format is not supported. Im using a optical cable and Its driving me insane. Any help would be great. As you can tell what I have going on here on the screen shot but hell... I cant get dolby or DTS to work keeps giving me that message. <img border="0" width="799" src="http://i9.photobucket.com/albums/a90/bravounit9/Untitled-.jpg" height="653" align="bottom">@75.8.77.249

    J. Ok so I got it all working..... But if it can only be played at 48khz I thaugh 92khz is better. Cause I notice when I went from prologic 2 to just optical Digital I dont see that number on my uppper right pud it doesnt say on there 96khz anymore.... :\ So what is 48khz suppose to be better? By the way thanks for all the help also. You guys been helpful.. Just like to know more. Im new to this whole dolby digital. My first speakers that are Dolby Digital. Never hade Dolby Digital speakers [email protected]

  • DDL and DTS Connect License Activation

    When i try to activate thru the activation web site i get error. is the web site down?

    Thanks for the reply.
    I've just checked with the folks and it seems that the server over at our end is working properly. Could you try using a different browser and temporary disable the anti-virus program to see if it helps? If this is still not working for you, please log a support ticket with our Customer Support for further assistance.

  • DDL and DTS Connect License

    Is there any other way to obtain a licence, there are some people that don't have credit cards so are unable to purchase from your web site
    This is a problem for me as I have just brought a new X-Fi to replace a old Audigy 2 ZS, due to problems with Windows 7. Now I have no SPDIF pass-though except for stereo:angry: this is not good since it's a Home Theater setup.

    Thunderau wrote:
    Is there any other way to obtain a licence, there are some people that don't have credit cards so are unable to purchase from your web site
    This is a problem for me as I have just brought a new X-Fi to replace a old Audigy 2 ZS, due to problems with Windows 7. Now I have no SPDIF pass-though except for stereo:angry: this is not good since it's a Home Theater setup.
    Actual passtrough of streams is still there, meaning, if you want to watch a movie with 5. DD with decoding at your home theater decoder you DO NOT need the license at all.

  • Cant get DTS Connect to show when I install the DD Live and DTS connect pack

    Whats up with this?
    I bought the DD Li've and DTS Connect Pack yesterday. After installing and restarting machine I go into the Creative Console Launcher and I can only see DD Li've available and not DTS Connect. My receiver send out and supports DTS fine as I been using it all the time with DTS supported video files. The only way I can get DTS now is if I disable DD Li've so it picks up the signal. I'm using Win XP Pro.
    This is what it is showing.

    Exactly the same problem for me.
    I have a SB X-Fi Titanium Fatalty pro Series PCI express withe the latest drivers? http://www.touslesdrivers.com/index....3&v_code=24368, with vista 64 bits SP.
    I also installed the 2 plugins DDL 3.00.00 and DTS connect .03.00 but i don't have the DTS choice as you could see on this printscreen ...
    [img]http//img99.imageshack.us/img99/4843/sbtit.jpg[/img]
    Thank you for help ...
    Message Edited by didierh on 05-26-2009 06:3 AM

  • DDL or DTS = no sound out of rear speak

    I have a sb xfi plat with optical out going to a dd/dts reciever and every time i play an mp3 i only get sound out of the front speakers and not my rears, is anyone else having this issue?

    bigjohns97 wrote:
    Thank you for the responce, however with every other DDL / DTS connect (nforce2 soundstorm,?blue gears, auzentech) you could enable DDL or DTS connect and any stereo source would automatically be 5. or 6. surround sound. See below.
    MP3 source -> real ddl/dts connect sound car?-> dolby digital / dts stream -> external reciever with dolby digital dts light on +sound on all speakers
    On the sound blaster the following happens
    MP3 source ->?sb xfi plat -> dolby digital /dts stream with only 2 channels being used?-> external reciever with DD or DTS light on + sound from only front speakers.
    Are you telling me this is how?creative designed this to work because?it isn't working like?every other DDL / DTS connect card out there.
    I don't kow how and where exactly the defferences are between those solutions. But as I told it, it is the way the Creative implemention handles it. If you don't use CMSS-3D or use the surround functions of you Decoder (I have a seperate balance for "surround" on my Z-5500 where I can set If the rear speaker are used *at all*) you won't get automaticly Surround Sound with MP3. Of course it still depends a bit on you player software, there are player/filters (AC3 Filter; ffdshow) out there which can do that too. Upmixing Stuff, I mean but then you don't really need DDL. I use it to encode actual game sounds, because strangely I don't have any popping and noise in there while I use it (just read up that crackling/popping thread.

  • I have an HP-Pavilion Vista PC with MS Office 2007 and Service Pack 2. Each time I try to save a Wo

    I have an HP-Pavilion Vista PC with MS Office 2007 and Service Pack 2.  Each time I try to save a Word or Excel document I get the “Not Responding” message.  The “Word is saving……” bar at the bottom does not show any progress.  On clicking the document I get a faded version even when in Safe Mode.  Somehow the document appears on the Desktop where I tried to save it.  On trying to open the saved document, even as administrator, I get the following ”File in Use” message:
    “The ….docx is locked for editing by….” and I am asked three questions including:
    “Do you want to open a Read Only copy” yet on clicking “Yes” I am able to edit the same document.
    On trying to save to a different location I get the message:
    “Your autocorrect file MSO 1033.ad could not be saved. The file may be read only or you may not have permission to modify this file.”
    The same message stating FILE12\1033\MSO.ACL MSO 1033ad recurs with new Excel documents.
    How can I correct this problem?
    PS
    Worse still, the HP Advisor icon that appears on startup does not load successfully while showing the message: “Access to the path Hewlett-Packard\HD Advisor is denied”.
    What can I do about it?
    ZDK

    I'm having the same issue, allowing guest access on the share did change the logs I'm getting in Samba. Earlier on it was giving errors on the inability of guest access to the share.
    ============================================================
    [2008/01/29 13:05:47, 0] /SourceCache/samba/samba-100.5/samba/source/lib/fault.c:fault_report(37)
    INTERNAL ERROR: Signal 11 in pid 4204 (3.0.10)
    Please read the appendix Bugs of the Samba HOWTO collection
    [2008/01/29 13:05:47, 0] /SourceCache/samba/samba-100.5/samba/source/lib/fault.c:fault_report(39)
    ============================================================
    I also noticed that the temporary file that is created by office is not removed after the attempt to safe the file. (something like: ~$filename).

  • SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and service packs.

    SSRS 2008 R2 is extremely slow.  The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes.  I have read this is a bug in SSRS 2008 R2.  We installed the most recent patches and
    service packs.  Nothing we've done so far has fixed it and I see that I'm not the only person with this problem.  However I don't see any answers either.

    Hi Kim Sharp,
    According to your description that when you view the report it is extremely slow in SSRS 2008 R2 but it is very fast when execute the query in dataset designer, right?
    I have tested on my local environment and can‘t reproduce the issue. Obviously, it is the performance issue, rendering performance can be affected by a combination of factors that include hardware, number of concurrent users accessing reports, the amount
    of data in a report, design of the report, and output format. If you have parameters in your report which contains many values in the list, the bad performance as you mentioned is an known issue on 2008 R2 and already have the hotfix:
    http://support.microsoft.com/kb/2276203
    Any issue after applying the update, I recommend you that submit a feedback at https://connect.microsoft.com/SQLServer/ 
    If you don’t have, you can do some action to improve the performance when designing the report. Because how you create and update reports affects how fast the report renders.
    Actually, the Report Server ExecutionLog2  view contains reports performance data. You could make use of below query to see where the report processing time is being spent:
    After you determine whether the delay time is in data retrieval, report processing, or report rendering:
    use ReportServer
    SELECT TOP 10 ReportPath,parameters,
    TimeDataRetrieval + TimeProcessing + TimeRendering as [total time],
    TimeDataRetrieval, TimeProcessing, TimeRendering,
    ByteCount, [RowCount],Source, AdditionalInfo
    FROM ExecutionLog2
    ORDER BY Timestart DESC
    Use below methods to help troubleshoot issues according to the above query result :
    Troubleshooting Reports: Report Performance
    Besides this, you could also follow these articles for more information about this issue:
    Report Server Catalog Best Practices
    Performance, Snapshots, Caching (Reporting Services)
    Similar thread for your reference:
    SSRS slow
    Any problem, please feel free to ask
    Regards
    Vicky Liu

  • Having problems downloading itunes 10.5.2; box states windows installer issue. I have a 2005 with windows XP and service pack 2. Any ideas?

    Just bought a new ipod touch for my daughter.  It won't sync without itunes 10.5.2 loaded on our computer (a 2005 HP with Windows XP and service pack 2.)  When I've tried to load 10.5.2, I get an error message box stating there is a problem with my Windows installer.  I've tried loading the windows installer hot fix KB942288-v3-x86, but it didn't help.  Any suggestion?

    Hi Lorheak,
    thanks for the quick reply. I had the same idea already yesterday. I use Norton Internet Security for a long time now without any problems. I think this a Apple or Microsoft problem, because the popup window which appear come from Windows DEP. I got no message from the firewall with any problem. I check the log files from Norton and Windows already but find nothing. This is a very strange problem. In the past I have had a lot of other problems with iTunes upgrades. Everytime I accept the installation of the newest version I got errors regarding missing "msi" files.
    Greetings Gert

  • How to find out the versions of family pack and mini pack installed?

    There are family pack and mini pack for HRMS.
    How to find out the versions of family pack and mini pack installed
    just by a Unix command or sqlplus Select statement?
    Thanks

    you can get the Minipack version of the products by querying fnd_product_installations or ad_patchdriver_minipks, for family packs you need to query through Metalink, OR if you have u driver file which resides on $AY_TOP/discoverer, looks for the minipacks/familypack version in the driver file.

  • X-fi Xtrememusic doesn't have the bottoms of DD and DTS in the audio console

    Hellow every body!....
    I have a little problem with the Creative X-fi Xtrememusic OEM that I bought...:
    ) The issue is that when the card is instaled withthe drivers, I notice that the windows detect the sound card as a X-fi audio, and not with the name of x-fi xtreme music.... this is normal? all the x-fi are detected as a x-fi audio?... Because this card that I have, is the xtrememusic sure.... because the audio is blue and its diferent like the sound card that I have...
    2) Thats is the light problem.... Now the heavy xD: After installed the sound card I notice that in the audio console there is NO bottoms of the options "DD and DTS"... this sections are missing...
    I try to uninstall the cd drivers... download the last drivers of this page... and when the last drivers are installed... there is no audio console and nothing.... only the driver and a old audio console... (not the with moder audio console that shows up in the current x-fi)
    - Know I format my PC and I installed all again.... and the same problems shows up...
    I have the windows xp ue v7....
    Any how can help me? I don't know what to do... I try anything and nothing works...

    when did you purchase this xtrememusic? if I don't remember wrongly.... the newer refresh doesn't have dd and dts decoding anymore and have to use the included powerdvd to do it. only the older refresh of xtrememusic include dd/dts decoding via creative driver. furthermore yours is an oem version....it may also have different function/feature. you can try searching the CD and see if there is any folder by the name of "PDVD" or something?with?"dvd",?can't?really?remember?the?ex act?name... if?the?CD?you?have?have?this?folder,?then?you?won' t?have?the?ddd/dts?function?in?the?audio?console.

Maybe you are looking for