DDNS and UPnP Problems On the WVC80N Camera

For weeks I've been having problems with the two things I mentioned in the subject field. I did talk to an Upper Level Tech Support from Linksys on Sunday, but she disabled my my UPnP on my Router, well that can't happen because if I do that then I might as well get rid of my TZO Account, which that will happen next month if I don't renew it. I keep getting error messages, it was on both of my WVC80N Cameras but now it's only on one of them. The message says the DDNS: Failed to get current public IP Address a little bit of that, but alot of this UPnP: Internet Gateway UPnP Discovery Failure. I have a WRT160N V3 Router, it still records on motion but if the UPnP problem keeps coming on it might not record when the problem occurs. I on TimeWarner Cable, can the problem be with them?
Solved!
Go to Solution.

You have 2 WVC80N cameras.
Let me know what are the IP addresses of your cameras and when do you get error?
You have WRT160N router. Open the setup page of the router and check the Internet IP address on the status page of the router.
Make sure that the proper ports are opened on your for both the cameras.
Can you see the camera on the local network ?

Similar Messages

I want to ask about iphone that the facetime is not working in UAE is that a problem ? and this problem affect the front camera "hardware"?

i want to ask about iphone that the facetime is not working in UAE is that a problem ? and this problem affect the front camera "hardware"?

minaaemile wrote:
there somting is like not clear so i think that the blocking of factime is affect the front camera so i want be sure if the front camera of iphone from UAE is like any iphone from another country and have the same quality ??
The front-facing camera is available for use even without FaceTime. If you are having issues with your front-facing camera, I suggest troubleshooting the issue:
Basic Troubleshooting Steps when all else fails
- Quit the App by opening multi-tasking bar, and swiping the App upward to make it disappear. (For iOS 6 older, hold down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.)
- Relaunch the App and try again.
- Restart the device. http://support.apple.com/kb/ht1430
- Reset the device. (Same article as above.)
- Reset All Settings (Settings > General > Reset > Reset All Settings)
- Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
- Restore as new device. http://support.apple.com/kb/HT4137 For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
- Test the issue after each step. If the last one does not resolve the issue, it is likely a hardware problem.

TS2634 I bought my iPhone 4s 16gb just a week ago and Im having problems with the frontal camera.. is blurry...

I bought my iPhone 4s 16gb just a week ago and Im having problems with the frontal camera.. is blurry... anyone has experimented this issue too? please let me know!

Did you put a screen protector on the phone or did you pull the protective film off the phone?

I am trying to connect my Sony DCR-TRV350 to iMovie so that I can make DVD's from family videos. I am having problems getting the video camera connected. Any advice on how to do this?

I am trying to connect my Sony DCR-TRV350 to iMovie so that I can make DVD's from family videos. I am having problems getting the video camera connected. Any advice on how to do this?

What happens when, after you connect your cam, you go to File > Import Media?
But before that, does your cam require you to export your video files upon USB connection? I have a JVC Everio HD and I have to "Export to Library" from the cam's menu first-thing. This was true even in prior iMovie versions.

Problem with the back camera in iPhone 4 (Black Shadow)

Hi, I have a problem with the back camera. When turned on I can see a black shadow on one side and when I take the photo, appears in all the photos.
I searched on the Internet to resolve this problem but I haven't been successful. A friend told me that maybe it is dirt that was introduced into the cover but I don't think It's true.
The iPhone haven't dropped me for some quite time and don't crashing.
Look here is a photo to show you how the black shadow looks like:
Please, anyone know what the problem can be?

It certainly does work.
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

Problems with the front camera on iPhone 4

Hey, guys. Just faced a problem with the front camera on my iPhone 4. So, when it's enabled this thing is on screen and all the pictures taken on it also has it:
http://bit.ly/epZypp
I've never dropped the phone, it isn't jailbroken or unlocked, it was bought in Britain but using in Russia, the firmware is 4.2.1.
So, guys, can you help me?

Have you tried resetting your phone by holding down the sleep/wake button and the home button at the same time until the phone restarts?

How to copy videos from iPhone to iPhone? The videos are in QT format and were taken using the iPhone camera.

How to copy videos from iPhone to iPhone? The videos are in QT format and were taken using the iPhone camera.Help me, anyone? Thanks in advance.

Just to add.....I created a folder on my PC to store all videos taken from my iPhone and my wife's iPhone.
I just cannot sync those videos taken using my wife's iPhone to my iPhone.

I have an iMac OS X 10.6.8 and have problems with the backup Disk for Time Machine disconnecting itself with the message that I ejected it improperly.. It ejected itself - why?

I have an iMac OS X 10.6.8 and have problems with the backup drive to Time Machine ejecting itself and so does not automatically backup the way it is meant to do. It is connected with an USB cable to my iMac. What could cause this - malfuntioning drive?

The "iLife" apps are not part of any Mac operating system install and are a separate purchase.
Once you get past 10.6.6 you can purchase and download iPhoto, GarageBand and iMovie. iWeb and iDVD have been discontinued.
Snow Leopard 10.6.6 and higher include the App Store application which is what you use to purchase Lion.

Why is my iphone 5 having network and battery problems after the ios 6.1.2?

why is my iphone 5 having network and battery problems after the ios 6.1.2?

I also forgot to mention that when it did have power, it wouldn't let me shut it off to try and conserve the battery life. Right when it powered down it would power right back up.

Ipad 2 wifi 3g has problem in the back camera whats the solution plz

ipad 2 wifi + 3g has problem in the back camera whats the solution plz

Skype is working very well on the Ipad but the camera doesn't!! When i go on "camera" icon, my screen stay like that
I canno't take any picture or any movie....

Performance and Contention problem with the database ?

Hello!
I am having one database which is used by around 95 thousand
users.Database contain about 4 lakh records. The database is
going smooth and perfect.
The problem(perfomance is slow and there is contension too) came
when i made 4 web applications which contain atleast 1000 hits
(1000 records are inserted in the database ) per day.
Now the db is not going so smooth(contention and performance
problem).
I think this is happening becuase of those 4 web applications.
So should i make new database for that 4 applications or i need
to get the new system for it or there is another way through i
can tune my running database.
Any help will be appreciated.
Regards
Seemab

Hi,
If i well understand, u have one database and u insert 4000 rows
per day and u have performance problem ?
I think u have a big problem cause it's not really a big
intensity on a base. So u should have big problems on ur
database design such as undersized memory area, bad disk
repartition, bad types of indexes or something like that.
To decrease the contention, u should separate ur data and index
datafiles over differents disks and specialize tablespace by the
granularity of the table.
But u r not enough precise to expect a precise answer; could u
be more precise ? as the server u have, data volumes, a select *
from v$system_event, etc...
Good Luck,
Fred DENIS

I use an iMac (27" 3.4) and have problems with the Magic Mouse. It does not use contact, but opens useless and unrelated submenus with every click, even on the empty desktop. I can't shift, open or close pages. Has anyone out there the same problem?

I use an iMac 27" (mid 2011). Until recently I had OSX 10.6.8 installed, but both, the HDD and SSD had to be replaced, and I lost all the memory.
After the repair through Apple Care I had OSX 10.7.5. (Lion) installed, which developed a Magic Mouse problem.
Unlike with most users, I have no problems with connection, but grapple with a different kind of erratic behaviour.
All fancy stuff is turned off in the mouse preferences. When I try to move, open or close pages, unrelated submenus pop up and hinder the
required task. No matter how often I click, these menus stay there, and they even come up when clicking on the bare desktop.
It renders the mouse absolutely useless, as no work can be done with it.
The first 'Magic Mouse' had depleted batteries every few days, despite switching it off after use.
I was supplied a new Mouse, which does better battery-wise, but the problems are the same. I can't get a result by clicking on any link, due to
the pop-up menus, so both 'Magic Mice' are totally useless.
At present I am using the old USB mouse from my Mac Pro, and that works still o.k.
The problem are not the mice, but the software. The first 2 weeks after installation of OSX 10.7.5 the Magic Mouse worked though.
I have no idea as to what the reason may be.
Has anyone in the community ever experienced that particular problem. Any hint would be welcomed.
Thank you!

Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
Someone on this forum suggested, that USB3 may interfere with the magic mouse.
I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
Thanks for the advice, Bee
Cheers, Gerd

Performance (slow) and (maybe) problems doing the troubleshooting steps

I had noticed Time Machine backups taking longer and having more of a performance hit when they were happening, so I decided to check things out.
Based on some forum postings, I decided to try some of the steps outlined in the main "troubleshooting" thread.
Bottom line: I ended up at the Repair/Verify Disk step (A5) in the troubleshooting steps and since I'm using a Time Capsule, proceeded with (trying) to run a repair on the sparse bundle. Opened things up, but when I tried to " . . . mount the sparse bundle by opening the TC in the Finder and double-clicking on the sparse bundle" things seemed to hang.
I have a window indicating it is opening the sparse bundle (name seems correct), but it has been doing this for over half an hour without any visible progress. All I have is a process bar and "Checking Volumes..." (I do have cancel & skip as options.)
I'm loath to cancel or skip as it is possible that taking this long is normal.
Can anyone give me an idea how long to expect this to take and/or if it won't open properly, suggest a next step to try?
Thanks in advance,

Here's the logs (I confess, I forgot to check that when it wasn't in the visible window).
2010-03-03 15:34:22 -0500: Disk Utility started.
2010-03-03 15:34:31 -0500: Verify and Repair volume “Backup of Chris Huntington’s Computer”
Starting repair tool: 2010-03-03 15:34:31 -0500
2010-03-03 15:34:31 -0500: Checking Journaled HFS Plus volume.
2010-03-03 15:34:31 -0500: Detected a case-sensitive catalog.
2010-03-03 15:34:32 -0500: Checking Extents Overflow file.
2010-03-03 15:34:32 -0500: Checking Catalog file.
2010-03-03 15:52:44 -0500: Checking multi-linked files.
2010-03-03 21:12:52 -0500: Checking Catalog hierarchy.
2010-03-03 21:51:24 -0500: Checking Extended Attributes file.
2010-03-03 21:53:06 -0500: Checking multi-linked directories.
2010-03-03 23:22:27 -0500: Checking volume bitmap.
2010-03-03 23:22:29 -0500: Checking volume information.
2010-03-03 23:22:29 -0500: 2010-03-03 23:22:29 -0500: The volume Backup of Chris Huntington’s Computer appears to be OK.
Repair tool completed: 2010-03-03 23:22:31 -0500
2010-03-03 23:22:31 -0500:
2010-03-03 23:22:31 -0500:
2010-03-04 08:24:55 -0500: Attach Image “Chris Huntington’s Computer_001b63a90f4c.sparsebundle”
2010-03-04 08:24:55 -0500: Initializing…
2010-03-04 08:24:59 -0500: Operation canceled by user.
2010-03-04 08:25:10 -0500: Attaching…
2010-03-04 08:25:11 -0500: Checking volumes…
2010-03-04 08:25:11 -0500: Volume check completed…
2010-03-04 08:25:11 -0500: Attaching…
2010-03-04 08:25:11 -0500: Finishing…
2010-03-04 08:46:59 -0500: Verify and Repair volume “Backup of Chris Huntington’s Computer”
Starting repair tool: 2010-03-04 08:46:59 -0500
2010-03-04 08:46:59 -0500: Checking Journaled HFS Plus volume.
2010-03-04 08:46:59 -0500: Detected a case-sensitive catalog.
2010-03-04 08:46:59 -0500: Checking Extents Overflow file.
2010-03-04 08:46:59 -0500: Checking Catalog file.
2010-03-04 09:05:12 -0500: Checking multi-linked files.
2010-03-04 11:35:50 -0500: Stopped by user
Repair tool completed: 2010-03-04 11:35:56 -0500
2010-03-04 11:35:56 -0500:
2010-03-04 11:35:56 -0500:
As you can see, I ended up aborting the second one after ~3 hours (99.9% of which was spent ~1/2 way done with 21 minutes as the estimated remaining time).
Also, the first attempt took almost 8 hours(!) and didn't detect any errors.
I see, re: reset. I'm pretty much in agreement that it's beginning to look like deleting the sparse bundle and just letting time machine take over (i.e. starting from scratch) is looking like the main option.
I guess on one level, I'm back to the strangeness of my "problem." Everything, other than being really slow (including the disk utility check), seems to be working. On one level, I am paranoid that there is indeed a problem and worry that if I just ignore it, it will come back to bite me if I ever actually need to restore from the backup.
Thanks again,

JComboBox selection and highlight problem of the selected item

Hi,
I have a question how can I make my newly added item to the combo-box selectable and highlighted. I am adding new items to my custom comboBox dynamically and I want whatever item I add to be selected by default. I am using my own custom ComboBoxModel that extends AbstractListModel and implements ComboBoxModel and TreeModelListener, and my custom Renderer that extends JLabel and implements ListCellRenderer. Because I am trying to get a tree structure in my comboBox model and that's why I have my own custom model and renderer. Now when I add a new node or item to my comboBox it is being added and shown in the combo-box textField, but as soon I pull down the combo-box my parent directory is selected though my current selection is the last node added. That's how I am adding new nodes and making it selectable
treeModel.insertNodeInto(tempNode, (DefaultMutableTreeNode)nodeCollection.lastElement(), 0);
int nodeTotal =((CMRGlobals.myTreeGlobals).getModel()).getSize();
Object lastNode = CMRGlobals.myTreeGlobals).getModel()).getElementAt(nodeTotal - 1);
((CMRGlobals.myTreeGlobals).getModel()).setSelectedItem(lastNode);
when I do this my node is added under my parentNode and is shown in the comboBox but when I try to pull down the combo my parent node is high lighted and when I move out of the combo-box my parent node gets selected and show in the combo-box though I haven't selected it,and the contents of my last node are shown. I am just writing my own custom model that simulates the effect of JTree. I am using these......
DefaultMutableTreeNode and
DefaultTreeModel
and in my JComboBox I am setting my model as
this.setModel(new myModel(treemodel));
this.setRenderer(new myRenderer());
I am building my own FileDialog that just works like FileDialog I have all the functionality except this problem.Thanks for any help. I know I have posted this same thread yesterday but I didn't get any response hoping now may somebody can help me.Thanks again

never mind I got it
Thanks

Spotify and facebook problem with the date

Hi, everyone.My spotify account have a problem with the date. I changed the date on facebook and nothing happens with that, the spotify account has a wrong date, is not the same as facebook account

Hi ,
By default , RFC accept date format of SQL date (yyyy-mm-dd) . If you are using a date picker from WD, it directly set the date in SQL date format. Incase if you are trying to pass date to RFC in some other way you have to convert that into SQL date format before passing.
if you are passing String date of format dd-mm-yyyy , you try this method to convert that to SQL date and pass to your RFC.
public java.sql.Date sqlDateConvert( String date) {
    //@@begin sqlDateConvert()
     java.sql.Date dateObj=null;
     try{
          StringTokenizer tempStringTokenizer = new StringTokenizer(""+date,"-");          int dd=Integer.parseInt(tempStringTokenizer.nextToken().trim());
                                int mm=Integer.parseInt(tempStringTokenizer.nextToken().trim());
          mm=mm-1;
          int yyyy=Integer.parseInt(tempStringTokenizer.nextToken().trim());
          Calendar cal =Calendar.getInstance();
          cal.set(yyyy,mm,dd);
          dateObj = new java.sql.Date( cal.getTime().getTime());
     }catch(Exception e)
          return dateObj;
Hope this will help you.

DDNS and UPnP Problems On the WVC80N Camera

Similar Messages

Maybe you are looking for