DDNS error on WRP400 with firmware version: 2.00.26

I have recently upgraded my WRP400 with the latest firmware (2.00.26) and found that the DDNS updating function with dyndns.org is stopped.
I made tests with the previous firmwares (2.00.20 and even with the old 1.01.00) and DDNS updating works with these older firmwares and stops immediately when the new 2.00.26 firmware is applied.
The reason why I need to upgrade to the latest fw, because I have the very annoying issue with the WRP400's stoppages. The release notes for the .26 firmware tells this is fixed now. btw, after the fw update it has stopped only once in 3 days...(!) but this is far better than the daily 2 or more stops...
I need the DDNS service, and I want a stop-free router at the same time. I know, our world is not that easy today, but please...

Hi Szabolcs,
I do have the same problem.
I do use more them 10 WRP400 devices, and I am still using fw 2.00.20 due to the DDNS problem.
WRP400 could be a very nice device, but it simply doesn't performs as it should. And in my opinion, the list of supported USB modems is simply to short.
I am already considering chaning from supplier and try to find a different and working solution in the market.
I also found out that the router, from time to time need to be reseted (it simply stops performing as it should). So, as there is no auto reset option, I need o use Plug In Timers to reset them once every day.
So, as you can see, I also would like to see a solution for this problem...

Similar Messages

I have a WRT54G Wireless modem with firmware version 1.02...

I have a WRT54G Wireless modem with firmware version 1.02.1 Mar 4 2003. i down loaded the latest firmware for the modem but i can't install it. I get the erroe message"incorrect image file".
What is wrong?

Which version of the WRT54G do you have? If it is not clearly stated on the router, go to Wikipedia.org and search for WRT54G, then you can use your router's serial number to determine which version of the router you own.
The version of the router is important. Each version has a different set of hardware in it, so each version takes a different firmware.
You can only load the firmware that corresponds to your model and version.

All RVS-4000's with firmware versions less than 1.3.2.0

Hi,
For those of you without the time to explore the Cisco site. I thought you guys might want to know about the following vulnerability. Which is fixed in the latest firmware version 1.3.2.0 for the RVS-4000:
Cisco Security Advisory: Cisco Small Business Video Surveillance Cameras and Cisco 4-Port Gigabit Security Routers Authentication Bypass Vulnerability
Document ID: 111641
Advisory ID: cisco-sa-20100421-vsc
http://www.cisco.com/warp/public/707/cisco-sa-20100421-vsc.shtml
Revision 1.1
Last Updated 2010 MAY 19 2030 UTC (GMT)
For Public Release 2010 APR 21 1600 UTC (GMT)
Software Versions and Fixes
To determine the software version running on a camera, administrators can click the "About" tab at the top-right of the device user interface. The software version information can be obtained on the System Status page under the "Status" tab.
The latest camera software can be downloaded at http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=282414029 ( registered customers only) .
The software version of the RVS4000 is displayed on the main router page displayed after users log in.
The latest RVS4000 software can be downloaded at http://tools.cisco.com/support/downloads/pub/Redirect.x?mdfid=282413304 ( registered customers only) .
When considering software upgrades, also consult http://www.cisco.com/go/psirt and any subsequent advisories to determine exposure and a complete upgrade solution.
In all cases, customers should exercise caution to be certain the devices to be upgraded contain sufficient memory and that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, contact the Cisco Small Business Support Center or your contracted maintenance provider for assistance.
Product
First Fixed Version
PVC2300
1.1.2.6
WVC200
1.2.2.0
WVC210
1.1.0.15
WVC2300
1.1.2.6
RVS4000
1.3.2.0
Bruce

Yes, I posted this same information in the Video Surveillance section a few weeks ago. it was actually a Partner on the
community who found this and brought it to our attention and we fixed it.
Thanks for cross posting here, since you are right in it also effected this router.
And a big thank you for taking the time to collaborate some very useful information with the community. I have noticed your recent posts and I think they are well writen, helpful, and well organized. I also like your idea of turning some threads into solutions documents and resource labs perhaps.
If you would ever like to post something of that natire, you may also. Just creat a document with your findings.
Steve

Photoshop CS3 gives me an error "not compatible with his version.." when trying to reopen files

Photoshop CS3 gives me an error-
"Could not complete your request because this file is not compatible with his version of photo shop" when I try and reopen psd's or layered tiffs,
it usually happens to files over 1gb in size,
I can open them up in illustrator but not in photo shop,
this is very annoying, it also happened today in CS2

"could not complete your request because the file is not compatible with this version of photoshop"
We've just had te same problem with a PSD file, it could not be opened by Photoshop CS nor CS3, and ImageReady showed the layers empty. So we downloaded The GIMP to give it a try. It took a extremely long time for The GIMP to open the 500MB file, but it did, without throwing error messages. Some layer masks were interpreted incorrectly, and the color profile tag was ignored. But at least the project could be saved to a new Photoshop file, which was opened by Photoshop without error messages except for the color profile tag.

Battery Update 1.4 does not update my battery with firmware version: 102a

Hello,
I was happy to see this update come out recently as my battery does lose power when the computer is powered down but I wanted to fully research it first because there's no going back with these firmware updates.
From Apple's page about this 1.4 update:
Batteries with this information in the Battery Information section [of Apple System Profiler] need this update:
A device name "ASMB016" or "ASMB013" in the serial number
A Pack Lot Code is 0002
A battery firmware version of 0110
Everything on my system matches except my battery firmware is version: 102a
Figuring that 102a was a lower firmware version than 0110 I went ahead and installed the update but I don't think my battery has been updated. I got no notice that it was being updated as others, on other forums, have described seeing and nothing in Apple System Profiler has changed.
A quick Google search showed that plenty of other people are asking on the web about this version 102a firmware as well.
So, any idea what the deal is with batteries that have the firmware version 102a? I got this current battery under the recall program as the original one that came with my MacBook was one of the bad ones.
This whole MacBook battery business has been a nightmare. It's wasted hours of my time, and is a real black eye on what is otherwise a good computer experience.
Thanks in advance for any input.

Macophile wrote:
Hello,
I was happy to see this update come out recently as my battery does lose power when the computer is powered down but I wanted to fully research it first because there's no going back with these firmware updates.
From Apple's page about this 1.4 update:
Batteries with this information in the Battery Information section [of Apple System Profiler] need this update:
A device name "ASMB016" or "ASMB013" in the serial number
A Pack Lot Code is 0002
A battery firmware version of 0110
Everything on my system matches except my battery firmware is version: 102a
Figuring that 102a was a lower firmware version than 0110 I went ahead and installed the update but I don't think my battery has been updated. I got no notice that it was being updated as others, on other forums, have described seeing and nothing in Apple System Profiler has changed.
I started thinking about it, and 102a is actually a larger number than 0110.
In any case, the updater was only meant for specific battery revisions.

FILE WONT OPEN IN PHOTOSHOP CS3... Gives error not compatable with this version

i have read through several other threads an nothing suggested seems to work
when i attempt to open a particular psd it tells me file cannot be opened because it is not compatible with this version of photoshop. it was built in cs3 and worked like 5 hrs before i tried to open it to work on it didn't save it when i opened it the last time(as in i just opened it on my pc to show some one n closed it ) i tried opening it in everything suggested it doesn't work. PLEASE help it was hard work ...

How are you saving these files (i.e., where did the file that won't open come from)?
If you're saving a .psd with a NEWER version of Photoshop, then in the newer version you should go into Edit - Preferences - File Handling and change the field Maximize PSD and PSB File Compatibility to Always if you want to be able to pass the PSD files around to multiple (older) versions of Photoshop.
If you're getting the files from others, you need to ask them to make the above change.
-Noel

Getting unknown error when printing with latest version(using HP Laserjet 1200). I can't print at all using this version. Able to print previously.

I ceased to be able to print when the latest version of FireFox was
downloaded. I can print from the same websites using I. E.
My printer is a HP Laserjet 1200 series. I only get the error(an unknown error occurred while printing) when trying to print through FireFox. I can print email fine and any other instance as long as I'm not going through FireFox.

Hello Josh,
We are using a couple of EFI (Fiery) controllers with our Canon copiers and I have been told by Canon support that we need to be using the MacTel (Universal Binary) versions of drivers for Leopard. Luckily for us we have mostly new models of RIPs and the UB drivers exist for these models, but I know that they are not available for all models, which I believe includes your X3e.
To determine if you have a driver or RIP issue, you could save the file as either PS or PDF and then use the EFI utilities, such as Command Workstation, to import the file to the RIP (select Process and Hold) and then see if you can print your multiple copies that way. If that works then you know that the RIP is probably okay.
The next test would be to create a generic PS queue to the X3e and print using this queue. If this works then you can narrow your issue down to the driver.
PaHu

B/W video recording in N-93 with firmware version ...

I have noticed the following after I upgraded to firware 20.0.058.in N-93
Do the following :
Pick a low lighted area
Start main camera
Select Video mode
Select Auto mode
The display will show colours
Now switch to night mode
The display will turn to black & white and video will record in B/W too.
Now switch to still mode
Select Auto mode
Display will be in colour
Select Night mode
The display and picture taken will again be in colour with details in dark area revealed
Now the question why does N-93 record / display in B/W
in video mode under the same lighting conditions while in still mode all colours come out perfectly and dark areas
given the fact the N-93 uses the same camera , same CMOS and same image processing software ?
If my post has helped you please click the white star on the right

3Julian
Today I visited Nokia care after i heard from them telling that have put a patch. I went there and saw their N-93 with the patch.Absolutely no improvement. I talked to the senir technical guy about this. He said he will escalalte the matter.
Another thing. Have you tried using bar-code scanner ?
It sucks. It takes ages to decode
If my post has helped you please click the white star on the right

5300: Problem with firmware upgrade

Hi,
I have Nokia 5300 Xpressmusic with firmware version 4.7. I have recently download Nokia Software Updater and tried to update my phone via USB cable connection. The software runs fine, it identifies my phone correctly, checks for update & tells me that V5.5 is available & downloads it successfully. The problem is that when I press the 'Upgrade' button, 1st it reboots my phone in 'Test Mode', then the 'Preparing installation' window remains on the screen for a couple of minutes & then it gives out an error saying "Connection to phone lost". I've tried reconnecting my cable but it still gives out the same error. Fortunately when I took the batteries out & reinserted & started my phone, it turned on successfully with the previous firmware version. But I still cant get it upgraded. I switched to another PC & tried it there but it still gives out the same error at the same stage. Kindly help me out with this, what is going on here?

16-Mar-2008 09:50 AM
omensa wrote:
Hi,
I have Nokia 5300 Xpressmusic with firmware version 4.7. I have recently download Nokia Software Updater and tried to update my phone via USB cable connection. The software runs fine, it identifies my phone correctly, checks for update & tells me that V5.5 is available & downloads it successfully. The problem is that when I press the 'Upgrade' button, 1st it reboots my phone in 'Test Mode', then the 'Preparing installation' window remains on the screen for a couple of minutes & then it gives out an error saying "Connection to phone lost". I've tried reconnecting my cable but it still gives out the same error. Fortunately when I took the batteries out & reinserted & started my phone, it turned on successfully with the previous firmware version. But I still cant get it upgraded. I switched to another PC & tried it there but it still gives out the same error at the same stage. Kindly help me out with this, what is going on here?
Get it updated at Nokia care. If the phone is in warrenty they do it free for you.
If my post has helped you please click the white star on the right

Need link to WRT16Nv2 Firmware version 11 please.

I recently purchased a WRT160Nv2 router with firmware version 11.
I had it configured to allow remote desktop connection to any of the 3 PCs.
PC1 3389 (External) to 3389 (Internal) on IP aaa.aaa.aaa.aaa
PC2 3390 (External) to 3389 (Internal) on IP bbb.bbb.bbb.bbb
PC3 3391 (External) to 3389 (Internal) on IP ccc.ccc.ccc.ccc
This worked fine.
However, I was having DNS issues that apparently were fixed in firmware version 15, so I upgraded.
And could no longer use the configuration above
As soon as I tried to enter the PC2 details (or PC3) it gave an error saying the port range was already in use.
I'm guessing that the firmware is not recognizing the different IP addresses and thinks the port 3389 is a duplicate.
After much searching, I found a link to firmware versio 8, which supposedly did not have the problems that version 11 has.
However, version 8 has the same issue as version 15 in not allowing the configuration I had.
Ande, after speaking to several online linksys chat people, and waiting patiently for a phone call from a tech, I do not have any link to firmware version 11.
So, if anyone happens to have a WRT160Nv2 with firmware version 11 still on it, and know some way to read the firmware out of it I would really appreciate it
Thanks.

Thanks for the link.
However, when I tried to register it told me my email address was banned (odd, since I've never been to that site).
Also, there is no contact information on the site for contacting the administrators so no way to get email unbanned in order to register to download the firmware.
I'm STILL waiting for the linksys tech to call, was supposed to be 48 hours from when I spoke to the tech online.
ldb.

Will firmware version 4.1.7 automatically update to 4.1.9?

I recently upgraded to OS 10.3 from OS 10.0 on my Imac 700MHz G3. The installation documentation said that I would be prompted to upgrade the firmware if I needed to. I was not prompted so I went ahead and did the OS 10.3 installation. The firmware remained version 4.1.7f4 after the install.
Not too long ago I went through the same procedure on my Imac 400MHz DV. The only difference is that I started the upgraded process from OS 9.I, then to 9.2.2 using the updates (ending at the latest version of 9), then to 10.0, and then to 10.3. And finally updating with 10.3.9 combo to OS 10.3.9. During that whole process I never new about firmware and never checked to see what version I had before starting this process. After all of the above installations were finished I ended up with firmware version 4.1.9f1.
My concern is with the 700MHz G3 IMac. I'd like to update to 10.3.9 using the combo update but I'm concerned about the firmware. Will firmware 4.1.7f4 be updated automatically to 4.1.9f1 after the combo OS 10.3.9 is installed? Or should I erase the disk again and start over by first installing firmware update 4.1.9? Actually if that were the case I wouldn't be able to update my firmware since I don't have the correct bootable version of OS 9 on disk that is required for that computer. However my previous experience with the installations on the 400MHz DV suggests to me that that the firmware will automatically be updated. But I would like confirmation from the experts. I'd hate to spend all that time downloading and installing all of the latest updates (Combo 10.3.9, etc.) only to find that the firmware version is incorrect.
Thanks!
Al

Al,
I don't understand your anger. In your first message
you posted that you installed OS 9 and updated it to
9.2.2. So why don't you do that again on the 700 MHz
iMac?
I find it very amusing that somehow you see anger in my post. That is realy very funny! The reason I didn't just simply install OS 9 on the 700MHz Imac is stated in my original post. I would need a special (the original disk that came with this computer) bootable OS 9.1 disk to install 9.1 on this particular computer. However if there are retail 9.2 or greater disks available then that would work to. I own a retail version of 9.1 that I used for the 400MHz Imac. That wont work on the 700MHz Imac. So now I have to buy a another OS 9 disk. Thanks for your input. Al

HP OfficeJet Pro 8600 Plus Firmware version not current on the HP Downloads Page

My HP OfficeJet Pro 8600 Plus came with Firmware version CKP5CN1334ER which the printer update says is up-to-date. The HP downloads page shows CLP1CN1322CR as the current version. Can you tell me what the differences are in version 1334 from the one (1322) on the web page?
It would be nice to have the latest version posted for download to prevent confusion.

Same question here.

Firmware Version 1.0.2 - Need Assistance

Hi ALL,
OK, I do believe a trip to the Apple Store is needed, please advise..
For the last couple of days, I have been getting the hang of using this great product and while doing so, have noticed it getting rather warm. Today after about 45 minutes of use, it got so hot it was uncomfortable to hold (NO Case, just the iPhone). I ended up turning it off for fear of damage. I think the iPhone needs to be exchanged... Do you AGREE?
Next, with Firmware Version 1.0.2, if I get an iPhone that has this version, do I have to update the firmware to version 1.1.1 in order to use it? OR can I leave it at the version 1.0.2 and activate the phone, sync the phone and in essence do all I do now, but with version 1.0.2? ; THOUGHTS?
If I exchange the iPhone, what is the procedure on activation, since I already had a phone and this is a replacement? ASSISTANCE NEEDED?

You need to take it to the Apple store. It is malfunctioning.
You will not get a phone with 1.0.2. All replacement phones come preloaded with 1.1.1.

How to Install EU Firmware version on my E52

Hi there. I just got a Nokia E52, with firmware version: 022.009.C00.01, Type RM - 469.
I cant read Vietnamese font, and my friends said i have to install EU versions of firmware. How could i do that?
When i use Ovi suit, it updated automatically, no option of variants right?
thank you

Hi chestervn,
Ask Nokia Care to advise you how to make Vietnamese fonts readable on your phone. When this cannot be achieved within the software package, that is officially linked to your product code, ask to install a different software package on your phone. Nokia Care has the means to do so. What is the product code of your phone? In the end your are the boss of your phone. Cheers

Apple TV 2nd generation firmware versions

Does anyone know if Apple released Apple TV 2nd Generation with firmware versions 5.0 or 5.1, or were all Apple TV 2's released with firmware under 5.0 ?
Thank you.

Yes all ATV2 were sold with a firmware under 5.0. Before the 5.0 release the last 4.0 firmware was 4.4.4, which can no longer be installed on the ATV2. However,all ATV2's can be upgraded to firmware version 5.0.
5.1 is for the iPhone/iPad.

DDNS error on WRP400 with firmware version: 2.00.26

Similar Messages

Maybe you are looking for