DDNTF_CONV_UC~" does not exist in the ABAP Dictionary

Hello Experts ,
We are migrating our ECC system from Oracle to HANA DB using DMO - during Post Processing phase we are getting the following error :
(screenshot attached)
4 ETG003 Table "DDNTF_CONV_UC~" does not exist in the ABAP Dictionary
4 ETG003 Table "DDNTF~" does not exist in the ABAP Dictionary
4 ETG003 Table "DDNTT_CONV_UC~" does not exist in the ABAP Dictionary
4 ETG003 Table "DDNTT~" does not exist in the ABAP Dictionary\
1.  Am not sure why Shadow tables are considered in this phase ?
2.  What steps i can follow to fix this error ?[I tried activating those using se14 but activation button is disabled].
3.  I have a option to ignore and move forward but am not sure about the side affects ?
Source ECC6 Ehp5 702 on Oracle.
Target  ECC6 Ehp7 740 on HANA.
SUM SP12 PL02
Thanks
Dev

Hi Avinash,
two comments on this:
This is not an issue, as this text is NOT an error message.
  (An error message lists the "E" as second character,
   but the screenshot above shows a space as second character.)
The log handling for this phase will be adapted in SUM SP13, so that non-errors are not listed at this point, to avoid this confusion.
SUM 1.0 SP12 PL 1 to PL 3 must not be used any longer, see SAP Note 2122247.
Regards, Boris

Similar Messages

  • DBIF_RSQL_TABLE_UNKNOWN Table AUSPN_V1 does not exist in the database with ID R/3

    Hi All,
    We are encountering numerous short dumps in our system caused by Table AUSPN_V1 does not exist in the database with ID R/3.
    Can anyone advise how to solve the issue? Please find below portion of the short dumps.
    Category               ABAP Programming Error
    Runtime Errors         DBIF_RSQL_TABLE_UNKNOWN
    ABAP Program           SAPLCLVF
    Application Component  CA-CL-CL
    Date and Time          11.06.2014 12:08:28
    Short text
         A table is unknown or does not exist.
    What happened?
         Error in the ABAP Application Program
         The current ABAP program "SAPLCLVF" had to be terminated because it has
         come across a statement that unfortunately cannot be executed.
    What can you do?
         Note down which actions and inputs caused the error.
         To process the problem further, contact you SAP system
         administrator.
         Using Transaction ST22 for ABAP Dump Analysis, you can look
         at and manage termination messages, and you can also
         keep them for a long time.
    Error analysis
         A table is referred to in an SAP Open SQL statement that either does not
          exist or is unknown to the ABAP Data Dictionary.
         The table involved is "AUSPN_V1" or another table accessed in the statement.
    Source Code Extract
    Line  SourceCde
      104     if dupl = kreuz.
      105       insert auspc_v2 client specified from table auspcv2
      106                              accepting duplicate keys.
      107     else.
      108       insert auspc_v2 client specified from table auspcv2.
      109       if syst-subrc ne 0.
      110         message a585 with tabausp.
      111       endif.
      112     endif.
      113     refresh auspcv2.
      114   endif.
      115   read table auspcv3 index 1.
      116   if syst-subrc = 0.
      117     if dupl = kreuz.
      118       insert auspc_v3 client specified from table auspcv3
      119                              accepting duplicate keys.
      120     else.
      121       insert auspc_v3 client specified from table auspcv3.
      122       if syst-subrc ne 0.
      123         message a585 with tabausp.
      124       endif.
      125     endif.
      126     refresh auspcv3.
      127   endif.
      128   read table auspnv1 index 1.
      129   if syst-subrc = 0.
      130     if dupl = kreuz.
      131       insert auspn_v1 client specified from table auspnv1
      132                              accepting duplicate keys.
      133     else.
    >>>>>       insert auspn_v1 client specified from table auspnv1.
      135       if syst-subrc ne 0.
      136         message a585 with tabausp.
      137       endif.
      138     endif.
      139     refresh auspnv1.
      140   endif.
      141   read table auspnv2 index 1.
      142   if syst-subrc = 0.
      143     if dupl = kreuz.
      144       insert auspn_v2 client specified from table auspnv2
      145                              accepting duplicate keys.
      146     else.
      147       insert auspn_v2 client specified from table auspnv2.
      148       if syst-subrc ne 0.
      149         message a585 with tabausp.
      150       endif.
      151     endif.
      152     refresh auspnv2.
      153   endif.

    Hello
    Please check on transaction SE11 if this table exists and if it is active.
    Also, it may be a database issue. What is your database?
    BR
    Caetano

  • Table /xyz/abc does not exist in the database

    Hi experienced developers,
    I created two transparent tables in customer name space in development system, transport to quality together with program using the tables, everything fine, no errors, no warnings.
    Then transported to production. No errors, no warnings. Detailed protocol shows tables have been activated, no errors or warnings.
    First try to use the program gives a dump.
    line 1191:
    ""/xyz/abc" is not defined in the ABAP Dictionary as a table, p"
    "rojection view, or database view."
    Double-click on the table in program code gives a popup information message
    Table/xyz/abc does not exist in the
    database
    After acknowleding the popup, the usual dictionary entry is shown, table is active. Utilities -> database object -> Display leads to an empty screen
    Fields of /xyz/abc  
    Fld name Position Data Type Length Decimals Not null Default
      Indexes for /xyz/abcI
    Utilities -> runtime object -> Display shows  the table name followed by message
    There is no active runtime object for ...
    prededed by big icon exclamation mark.
    We created a new transport with exactly the same result.
    Basis people have no idea.
    The only thing special (but OK I think) is that the tables have key fields only.
    Database is Oracle 11.2.0.2.0, SAP ECC 6.0
    SAP_ABA     701     0008     SAPKA70108     Cross-Application Component
    SAP_BASIS     701     0008     SAPKB70108     SAP Basis Component
    PI_BASIS     701     0008     SAPK-70108INPIBASIS     Basis Plug-In
    ST-PI     2008_1_700     0005     SAPKITLRD5     SAP Solution Tools Plug-In
    SAP_BS_FND     701     0009     SAPK-70109INSAPBSFND     SAP Business Suite Foundation
    SAP_BW     701     0008     SAPKW70108     SAP Business Warehouse
    SAP_AP     700     0022     SAPKNA7022     SAP Application Platform
    WEBCUIF     700     0009     SAPK-70009INWEBCUIF     SAP WEBCUIF 700
    Yes I know, this is a DDIC forum question but I hope for more (experienced) readers here.
    Thank you all for any hint leading to a solution.
    Best regards
    Clemens Li

    Hi,
    thank you for the comments although it does not help.
    Here is the excerpt from productive system  import protocol (original table names replaced as customer requirement)
    *** Activate objects at level 1
    Too low cost (2.100) for parallel processing. Minimum: 6.000
    * Synchronous execution, no parallel processing *
    Activate table /xyz/abcd1
    Table /xyz/abcd1 was activated successfully
    Activate table /xyz/abcd2
    Table /xyz/abcd2 was activated successfully
    Synchronous processing: 4 sec., 2 objects, 2.100 costs
          Object Activation
    End phase  001 ***********************************************************
    Start phase 002 **********************************************************
          Statistics on Activated and Deleted Objects
    Number of objects to be activated............:  2
    Objects not activated........................:  0
    Activated objects with errors in dependencies:  0
    Objects activated with warning...............:  0
    Successfully activated objects...............:  2
    Number of objects to be deleted..............:  0
    Objects not successfully deleted.............:  0
    Successfully deleted objects.................:  0
    Tables/views with DROP/CREATE................:  0
    No. of them marked for DROP/CREATE: 0
    Not marked for DROP/CREATE: 0
    Number of nametabs to be deleted.............:  0
    Successfully deleted nametabs................:  0
    Nametabs that were not successfully deleted..:  0
          Statistics on Activated and Deleted Objects
    End phase  002 ***********************************************************
    =========================================================================
    Mass Activation
    =========================================================================
    Process..................: ENNIPROD_10
    Return code..............: 0
    Phase 001..................: 00:00:04 (Object Activation)
    Phase 002..................: < 1 sec. (Statistics on Activated and ...)
    Program runtime..........: 00:00:05
    Date, time...............: 08.03.2012, 16:30:43
    Program end==============================================================
    ABAP Dictionary: Activation
    End date and time : 20120308163043
    Ended with return code:  ===> 0 <===
    Actually, I don' understand it.
    Regards,
    Clemens

  • View-does not exist on the database

    Hi Experts,
       Our Data Source/Extract Structure (R/3) is based on a view.
    There is an Issue with the View/DAta Source
    If i go to SE11>view Name> Display then i am getting
       'View ZART_ATTRS is not in the database' and then the next screen is the view definition
    This is a database view which is defined in the ABAP/4 Dictionary but does not exist on the database. No data can be read for this reason
    If i go to RSO2 and enter data source name and select display...
    Then it will display data source status as 'Saved' how can i activate it
    and i go to RSA6 select my Z data source which is based on the above view....context menu display data source/Check data source...when i get error
    'Only Tables and views are permitted for extraction'
    How can i overcome it

    Hi,
    As your view is existing in ABAP DICTIONARY , you need to take help of your DBA to get this created in the underlying database. This can be created using Database utility se14 transaction code. But it is good to have your DBA involved so that you have proper table space allocated to it.
    Hope this helps..
    Regards
    Manga(Assign points if it helps)

  • Installation Fails :/ yxefkoe does not exist on the 'localhost' host

    Hi Guys,
    I am trying to install NetWeaver 7.0 SR1 including Enhancement Package 1 > SAP Application Server ABAP > MaxDB > Central System > Central System on my pc. But I`m getting following error.
    The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\yxefkoe' does not exist on the 'localhost' host.
    Here is the dump from the log file.
    WARNING 2010-10-24 17:52:45.781
    Error 5 (Access is denied.
    ) in execution of a 'RegOpenKeyEx' function, line (81), with parameter (SYSTEM\CurrentControlSet\Services\yxefkoe).
    WARNING 2010-10-24 17:52:45.781
    The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\yxefkoe' does not exist on the 'localhost' host.
    ERROR 2010-10-24 17:52:45.781
    MOS-01185  The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\yxefkoe' does not exist on the 'localhost' host.
    ERROR 2010-10-24 17:52:45.781
    FCO-00011  The step collect with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR ( Last error reported by the step :The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\yxefkoe' does not exist on the 'localhost' host.).
    I have installed the Microsoft Loopback network adapter. And C:\WINDOWS\system32\drivers\etc\hosts file contains following entries.
    127.0.0.1       localhost
    10.10.0.10      anuja
    10.10.0.10 being the address given to the Loopback connection and anuja is the hostname.
    Please help me to solve this issue.
    Thanks!

    Thank you PR Srinivas and Khaiser.
    Actually I wish to explain how I solved the problem. I went to the key through the registry path. But saw that there was the folder present in the path but it was blank.
    So I right clicked on the folder went to Permission. I tried giving Full Control Permission for 'System' user name which did not solve the problem.
    Hence in the Permission option of yxefkoe registry key I clicked on Add. In the 'Select Groups or User' popup window I clicked on 'Advanced' option and then clicked on 'Find Now'. I selected the user name which I use to log in to windows and applied the changes.
    After all these steps I found entries in the registry folder 'yxefkoe'. I right clicked on the yxefkoe folder and went to Permissions - > Gave Full Control to the newly added user name.
    And then the problem was solved.
    So I guess when you should find two users in the Permissions option on the yxefkoe folder.
    1. System
    2. User name which u use to log into windows. -- > It is displayed like this --> User_Name(Hostname/User_Name)
    Correct me if i am incorrect here.
    Thanks a lot for the help!

  • Window W_WARNING_WINDOW does not exist in the component WDR_TEST_DDIC_SHLP

    Hello, I did not find any note regarding the WDR_TEST_DDIC_SHLP component. As the testing application can not be run this way (error thrown from the subject), is there any workaround anybody knows?
    I'm on ECC 6.0, kernel release 700, patch 236, ABAP 1563. In other words SAP_BASIS 700 / 0028, SAP_ABA 700 / 0028.
    (And yes, the W_WARNING_WINDOW really does not exist in the component, although the starting window of the application (WDR_TEST_DDIC_SHLP) is DDIC_SHLP). And there is no code in any of the hook methods of the window, so it has to be some call from the views that are counted over 30. Can anybody suggest how to over-piss this situation?

    Hi,
    The W_WARNING_WINDOW is available in later versions of Netweaver. I suggest you to raise an OSS message to SAP as this is a standard delivered component.
    Regards,
    Kiran

  • Field BSEG-SKFBT. does not exist in the screen

    Hi,
    While doing FBV0 the document is not posting and it is showing the error message as below.
    Field BSEG-SKFBT. does not exist in the screen SAPMF05A 0302
    Message no. 00349
    Diagnosis
    The specified field does not exist on the screen.
    Procedure
    Check your batch input data.
    govind.

    Govind,
    The filed BSEG-SKFBT (Discount base), is not available in the screeen SAPMF05A 0302.
    This happens between Development, Quality and Productions cients. The sequence of fields differs with
    respective to client.
    In Development while recording (SHDB) field  BSEG-SKFBT might have appeared on screen SAPMF05A 0301 but in Production or quality it might appear on some other screens
    Ask Abaper to check this, as this might be available in SAPMF05A 0301 or SAPMF05A 0303 .
    Hope this helps.
    Regards
    Velu Mudaliar

  • Method Implementation does not exist in the SWO1.

    Hi,
    If the definition of the method in the business object does not exist in the Business Object, where all the places the system will try to find & execute the code. For ex: we have a method(custom method) in the YBUSXXXX business object. But when we double click the method , we get the screen where we have 3 tabs, General/Result Type/ABAP tabs. In the ABAP tab, the radio button 'Other' was selected. I did not find the code for this method. If the code does not fins here, where system will find dynamically & excute that code. & how can I see that code? Pls help.
    Thanks,
    Pandu
    Moderator message : Duplicate post locked.
    Edited by: Vinod Kumar on Oct 5, 2011 9:43 AM

    See the below link
    The work book does not exist in the document store
    Regs
    Gopi
    Assign points if it is useful

  • BDCDATA error-Field INVFO-ZUONR does not exist in the screen SAPLMR1M 6000

    Hi
    I am trying to call transaction MIR7 from ABAP code and passing values to the same.
    I am able to pass data to first tab using code (as recorded in SHDB) :
        DATA BEGIN OF BDCDATA OCCURS 1.
        INCLUDE STRUCTURE BDCDATA.
        DATA END OF BDCDATA.
        CLEAR BDCDATA.
        BDCDATA-PROGRAM  = 'SAPLACHD'.
        BDCDATA-DYNPRO   = '1000'.
        BDCDATA-DYNBEGIN = 'X'.
        APPEND BDCDATA.
        CLEAR BDCDATA.
        BDCDATA-FNAM     = 'BKPF-BUKRS'.
        BDCDATA-FVAL     = CompCode.
        APPEND BDCDATA.
        CLEAR BDCDATA.
        BDCDATA-PROGRAM  = 'SAPLMR1M'.
        BDCDATA-DYNPRO   = '6000'.
        BDCDATA-DYNBEGIN = 'X'.
        APPEND BDCDATA.
        CLEAR BDCDATA.
        BDCDATA-FNAM     = 'INVFO-BLDAT'.
        BDCDATA-FVAL     = InvoiceDate.
        APPEND BDCDATA.
        CLEAR BDCDATA.
        BDCDATA-FNAM     = 'INVFO-WRBTR'.
        BDCDATA-FVAL     = InvoiceAmount.
        APPEND BDCDATA.
        Call Transaction 'MIR7' USING BDCDATA MODE 'A'.
    But when I add fields
        CLEAR BDCDATA.
        BDCDATA-FNAM     = 'INVFO-ZUONR'.
        BDCDATA-FVAL     = 'HELLO !!!!!'.
        APPEND BDCDATA.
        CLEAR BDCDATA.
        BDCDATA-FNAM     = 'INVFO-BKTXT'.
        BDCDATA-FVAL     = 'MY DATA .........'.
        APPEND BDCDATA.
    I get an error message :
    Field INVFO-ZUONR does not exist in the screen SAPLMR1M 6000
    But when I add
        CLEAR BDCDATA.
        BDCDATA-PROGRAM  = 'SAPLFDCB'.
        BDCDATA-DYNPRO   = '0150'.
        BDCDATA-DYNBEGIN = 'X'.
        APPEND BDCDATA.
    before setting INVFO-ZUONR, the error disappears, still I don't get values in HeaderText and Assignment fields on GUI
    Can anybody help.
    Thanks a lot
    Ruhi Hira

    I had used the exact recording as in SHDB but no success.
    Is it OK to create a parameter map this screen field to the parameter.
    Where I can set the parameter outside the screen..
    Ruhi Hira

  • The name "Folder" does not exist in the namespace

     I am trying to learn Wpf and doing some of the examples on the Microsoft site. https://msdn.microsoft.com/en-us/library/vstudio/bb546972(v=vs.110).aspx?cs-save-lang=1&cs-lang=vb#code-snippet-1
    I am using Visual studio 2013. As I work through the example I am getting the following error. 
    Error 1
    The name "Folder" does not exist in the namespace "clr-namespace:FolderExplorer".
    c:\users\hbrown\documents\visual studio 2013\Projects\FolderExplorer\FolderExplorer\MainWindow.xaml
    11 17
    FolderExplorer
    Error 2
    The name "Folder" does not exist in the namespace "clr-namespace:FolderExplorer".
    c:\users\hbrown\documents\visual studio 2013\Projects\FolderExplorer\FolderExplorer\MainWindow.xaml
    16 7
    FolderExplorer
    Here is the code:
    <Window x:Class="MainWindow"
        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
            xmlns:my="clr-namespace:FolderExplorer"
        Title="Folder Explorer" Height="350" Width="525">
        <Window.Resources>
            <ObjectDataProvider x:Key="RootFolderDataProvider" >
                <ObjectDataProvider.ObjectInstance>
                    <my:Folder FullPath="C:\"/>
                </ObjectDataProvider.ObjectInstance>
            </ObjectDataProvider>
            <HierarchicalDataTemplate 
       DataType    = "{x:Type my:Folder}"
                ItemsSource = "{Binding Path=SubFolders}">
                <TextBlock Text="{Binding Path=Name}" />
            </HierarchicalDataTemplate>
        </Window.Resources>
    I have a class file named Folder.vb with this code. 
    Public Class Folder
        Private _folder As DirectoryInfo
        Private _subFolders As ObservableCollection(Of Folder)
        Private _files As ObservableCollection(Of FileInfo)
        Public Sub New()
            Me.FullPath = "c:\"
        End Sub 'New
        Public ReadOnly Property Name() As String
            Get
                Return Me._folder.Name
            End Get
        End Property
        Public Property FullPath() As String
            Get
                Return Me._folder.FullName
            End Get
            Set(value As String)
                If Directory.Exists(value) Then
                    Me._folder = New DirectoryInfo(value)
                Else
                    Throw New ArgumentException("must exist", "fullPath")
                End If
            End Set
        End Property
        ReadOnly Property Files() As ObservableCollection(Of FileInfo)
            Get
                If Me._files Is Nothing Then
                    Me._files = New ObservableCollection(Of FileInfo)
                    Dim fi As FileInfo() = Me._folder.GetFiles()
                    Dim i As Integer
                    For i = 0 To fi.Length - 1
                        Me._files.Add(fi(i))
                    Next i
                End If
                Return Me._files
            End Get
        End Property
        ReadOnly Property SubFolders() As ObservableCollection(Of Folder)
            Get
                If Me._subFolders Is Nothing Then
                    Try
                        Me._subFolders = New ObservableCollection(Of Folder)
                        Dim di As DirectoryInfo() = Me._folder.GetDirectories()
                        Dim i As Integer
                        For i = 0 To di.Length - 1
                            Dim newFolder As New Folder()
                            newFolder.FullPath = di(i).FullName
                            Me._subFolders.Add(newFolder)
                        Next i
                    Catch ex As Exception
                        System.Diagnostics.Trace.WriteLine(ex.Message)
                    End Try
                End If
                Return Me._subFolders
            End Get
        End Property
    End Class
    Can someone explain what is happening. 
    Thanks Hal

    Did you try to build the application (Project->Build in Visual Studio) ? If the error doesn't go away then and you have no other compilation errors (if you do you need to fix these first), you should replace "FolderExplorer" with the namespace
    in which the Folder class resides. If you haven't explicitly declared a namespace, you will find the name of the default namespace under Project->Properties->Root namespace. Copy the value from this text box to your XAML:
    xmlns:my="clr-namespace:FolderExplorer"
    The default namespace is usually the same as the name of the application by default so if your application is called "FolderExplorer" you should be able to build it.
    If you cannot make it work then please upload a reproducable sample of your issue to OneDrive and post the link to it here for further help.
    Please remember to close your threads by marking helpful posts as answer and then start a new thread if you have a new question.

  • The name '' does not exist in the current context

    I have a recurring problem where all of a sudden I can no longer see the values of my variables when I debug my unit tests. I cannot find a pattern as to when this happens but I experience this across one of every 20 tests that I write. Occasionally this
    has also happened during normal debbuging of running code on my machine. 
    I have included 2 screen shots. The first is when it is working. I have a break point set at the declaration of list of types. At this point all my variables are still reporting their values back to the debugger. Once I step over this to the next line (screen
    shot 2) I get the error message 'The name '[variable name]' does not exist in the current context'
    This problem is annoying me to no end. If anyone has any insight as to why this might be happening I would be very much appreciative.
    My Settings/Configuration
    Using Visual Studio 2013 Premium (Version 12.0.31101.00 Update 4)
    Projects are all set to Target Framework = .NET 4.5.1
    Resharper 9.1 is installed
    My active configuration is debug mode, Any CPU
    My PC is 64bit and so is the O/S windows 8.1
    All of my projects are also compiled and built in debug mode
    For all my projects configuration debug has the Optimize Code check box unchecked
    I am unit testing code in an outside project referenced by the unit testing project (standard unit test project setup)
    I make use of the latest version of NSubstitute in my tests although I do not think that would have any bearing on this issue
    I omitted the code following the error because it is not relevant. I had cut it out and replaced it with a Task.Delay(4) which resulted in the same issue. 
    What I have tried so far
    I have tried debugging the unit test  from Visual Studio Test Explorer instead of from Resharper with the same result.
    If I remove 2 items at the end of the array it starts to work again (so 6 items initialized instead of 8)
    I clean solution with rebuild has no effect
    Removing properties of the array also seems to work, example remove all initialization of property Value
    Mark as answer or vote as helpful if you find it useful | Igor

    Hi IWolbers,
    >>I have a recurring problem where all of a sudden I can no longer see the values of my variables when I debug my unit tests. I cannot find a pattern as to when this happens but I experience this across one of every 20 tests that I write. Occasionally
    this has also happened during normal debbuging of running code on my machine.
    So you mean that it worked well before, am I right? 
    If you debug the same app in other VS machine, does it work well? So we could make sure that whether it is related to the VS IDE.
    Please disable all add-ins in your VS IDE, and then reset your VS settings, debug it again.
    https://msdn.microsoft.com/en-us/library/ms247075(v=vs.100).aspx
    Or you could run your VS in safe mode, debug it again, at least, we could know that whether it is the add-in's issue.
    https://msdn.microsoft.com/en-us/library/ms241278.aspx
    To make sure that it is not the project files' issue, create a new blank solution, copy the project files to the new solution, clean and rebuild the solution, check the result.
    >>Once I step over this to the next line (screen shot 2) I get the error message 'The name '[variable name]' does not exist in the current context'
    How about debugging it with "Step Into" instead of "Step Over"? Or you could add breakpoints between 234 line to 241 line, after the breakpoint is hit, check the watch window again. How about the result?
    In addition, do you check other debugger window like local or others?
    Best Regards,
    Jack
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • JDODataStoreException: The instance null does not exist in the data store

    I'm unable to figure out how this exception occurs.
    I have a class IDCounter which has a number of fields such as
    'm_Name' (String)
    'm_AccountName' (String)
    'm_UserName' (String)
    'm_Description' (String)
    'm_CreationDate' (Date)
    'm_LastModifiedDate' (Date)
    'm_DeletedDate' (Date)
    'm_Count' (long)
    The filter I'm using is "m_AccountName == \"test\" && m_UserName
    ==\"test\" && m_DeletedDate == null"
    The generated SQL statement is "SELECT t0.M_IDX, t0.JDOCLASSX,
    t0.JDOLOCKX, t0.M_ACCOUNTNAMEX, t0.M_CREATIONDATEX, t0.M_DELETEDDATEX,
    t0.M_DESCRIPTIONX, t0.M_LASTMODIFIEDDATEX, t0.M_NAMEX, t0.M_USERNAMEX,
    t0.M_COUNTX FROM ABSTRACTENTITYX t0 WHERE ((t0.M_DELETEDDATEX IS NULL) AND
    t0.JDOCLASSX = 'com.ewarna.pdm.entities.IDCounter')"
    Exception Trace:
    javax.jdo.JDODataStoreException: The instance null does not exist in the
    data store.
         at
    com.solarmetric.kodo.impl.jdbc.runtime.LazyResultList.instantiateRow(LazyResultList.java:165)
         at
    com.solarmetric.kodo.impl.jdbc.runtime.LazyResultList.get(LazyResultList.java:96)
         at java.util.AbstractList$Itr.next(AbstractList.java:416)
         at
    com.solarmetric.kodo.runtime.ResultListIterator.next(ResultListIterator.java:49)
         at
    com.solarmetric.kodo.impl.jdbc.runtime.ResultListFactory.createResultList(ResultListFactory.java:85)
         at
    com.solarmetric.kodo.impl.jdbc.runtime.JDBCStoreManager.executeQuery(JDBCStoreManager.java:646)
         at
    com.solarmetric.kodo.impl.jdbc.runtime.JDBCQuery.executeQuery(JDBCQuery.java:150)
         at com.solarmetric.kodo.query.QueryImpl.executeWithMap(QueryImpl.java:580)
         at com.solarmetric.kodo.query.QueryImpl.execute(QueryImpl.java:428)
         at
    com.solarmetric.kodo.query.QueryImpl$SynchronizedQuery.execute(QueryImpl.java:1331)
         at
    com.ewarna.pdm.sessions.persistence.BasicQuery.getByAdvancedFormula(BasicQuery.java:78)
         at
    com.ewarna.pdm.sessions.persistence.BasicQuery.getByFormula(BasicQuery.java:119)
         at
    com.ewarna.pdm.sessions.persistence.BasicQuery.getByFormula(BasicQuery.java:95)
         at
    com.ewarna.pdm.sessions.persistence.BasicQuery.getAll(BasicQuery.java:131)
         at
    com.ewarna.pdm.sessions.persistence.GenericEntityManager$7.execute(GenericEntityManager.java:305)
         at
    com.ewarna.pdm.sessions.persistence.GenericEntityManager.execute(GenericEntityManager.java:251)
         ... 18 more

    Youcan no longer display a workbook. You receive an error message when opening: <Internal error>: 1201 document storage
    Cause and prerequisites
    In very rare cases, when you store a workbook, you might not be able to open it again.
    Solution
    Function module BDS_PHIOS_GET_RIGHT has to be changed so that the last available version of the Workbooks can be displayed.

  • Field VIQMSM-MATXT(14) does not exist in the screen SAPLIQS0 7204

    Hi experts,
    I have a BDC calls QM02 Tcode in a custom report as follow:
      PERFORM bdc_dynpro      USING 'SAPLIQS0' '7204'.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '=REAK'.
      PERFORM bdc_field       USING 'BDC_CURSOR'
                                    'VIQMEL-QMNUM'.
      CLEAR txline.
      CONCATENATE 'VIQMSM-MATXT(' lnindex ')' INTO txline.
      " txline = VIQMSM-MATXT(0014)
      CONCATENATE 'PO #: ' alv_qmel-ponum INTO matxt SEPARATED BY space.
      PERFORM bdc_field       USING txline
                                      matxt.
      PERFORM bdc_transaction USING 'QM02'.
    When debugging I found that the input bdcdata table contains a field VIQMSM-MATXT(14) in screen SAPLIQS0 7204.
    Number 14 is the number of task of the notification which was not marked as deleted.
    This field caused the error: Field VIQMSM-MATXT(14) does not exist in the screen SAPLIQS0 7204 after that.
    I would like to know what does VIQMSM-MATXT(14) mean? How BDC can transfer VIQMSM-MATXT(14) to QM02? And How does it work?
    Thanks,
    Khanh

    Hi Kostek,
    I did not have the solution for this exact problem because our FA canceled this bug.
    Check your test case carefully whether the screen of the TCode called by BDC has that field OR NOT. If that screen does not have that field in your special case, just ignore it.
    Regards,
    Khanh

  • The Table.Column does not exist on the rowset

    Hi I have the following issue:
    I keep getting a message in Power BI Designer Preview that states:
    The 'collections.Name' column does not exist in the rowset.
    I have a MySQL DB connected to an Access DB and then I've created and saved a query within Access.
    Then I'm bringig in this query into Power BI Designer. To note, I can see my 1 row of data in the Query view of Power BI Designer but my error appears when I goto report after it tries to load the data into the model
    the MySQL Statement looks like this:
    SELECT orders.TRUNKSHOWID,
           orders.ID,
           orders.DATEENTERED,
           orders_products.NUMBER,
           orders_products.SIZE,
           orders_products.DESCRIPTION,
           products_categories.NAME AS Cat1,
           products_categories_1.NAME AS Cat2,
           collections.NAME,
           Releases.Name,
           orders_products.PRICE,
           orders_products.DISCOUNT,
           orders_products.TYPE,
           products.WHOLESALECOST,
           orders.FIRSTNAME,
           orders.LASTNAME,
           orders.ADDRESS,
           orders.ADDRESS2,
           orders.CITY,
           orders.STATE,
           orders.ZIP,
           orders.COUNTY,
           orders.COUNTRY,
           orders.PHONE,
           orders.EMAIL,
           orders.BILL_FIRSTNAME,
           orders.BILL_LASTNAME,
           orders.BILL_ADDRESS,
           orders.BILL_ADDRESS2,
           orders.BILL_CITY,
           orders.BILL_STATE,
           orders.BILL_ZIP,
           orders.BILL_COUNTRY,
           trunkshows.TRUNKKEEPERID
    FROM trunkshows
    INNER JOIN (Releases
                INNER JOIN ((((products
                               INNER JOIN (orders_products
                                           INNER JOIN orders ON orders_products.ORDERID = orders.ID) ON products.ID = orders_products.PRODUCTID)
                              INNER JOIN products_categories ON products.CATEGORYID = products_categories.ID)
                             INNER JOIN products_categories AS products_categories_1 ON products.CATEGORYID2 = products_categories_1.ID)
                            INNER JOIN collections ON products.COLLECTIONSID = collections.ID) ON Releases.ID = products.ReleasesID) ON trunkshows.ID = orders.TRUNKSHOWID

    Hi
    When you create a workbook in DEV, you will be assigning a query for that workbook
    When you transport workbook from DEV to QA,the assigned workbook comes along with it
    When you transport only query from DEV to QA, there are certain technical elements called query elements which may not have transported properly
    To avoid this inconsistency between DEV and QA,it is advisable you transport the workbook again....Create new workbook in DEV, assign a query, transport the workbook to QA
    Regards
    N Ganesh

  • Content file download failed. Reason: HTTP status 404: The requested URL does not exist on the server.

    Hi,
    I am getting this error in most of our WSUS servers.
    Content file download failed.
    Reason: HTTP status 404: The requested URL does not exist on the server.
    Source File: /Content/FB/134501186F4C81089054E4EC3376E74EEC895EFB.exe 
    Destination File: d:\wsus\WsusContent\FB\134501186F4C81089054E4EC3376E74EEC895EFB.exe
     After few minutes, getting below error as well. But i could see the synchronization has completed successfully.
    Log Name:      Application
    Source:        Windows Server Update Services
    Date:          12/19/2014 4:45:55 PM
    Event ID:      10032
    Task Category: 7
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      ******
    Description:
    The server is failing to download some updates.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Windows Server Update Services" />
        <EventID Qualifiers="0">10032</EventID>
        <Level>2</Level>
        <Task>7</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2014-12-19T08:45:55.000000000Z" />
        <EventRecordID>496887</EventRecordID>
        <Channel>Application</Channel>
        <Computer>*****</Computer>
         <Data>The server is failing to download some updates.</Data>
    This error is happening everyday. Please advise for a fix.

    Reason: HTTP status 404: The requested URL does not exist on the server.
    Source File: /Content/FB/134501186F4C81089054E4EC3376E74EEC895EFB.exe 
    Destination File: d:\wsus\WsusContent\FB\134501186F4C81089054E4EC3376E74EEC895EFB.exe
    Source:        Windows Server Update Services
    Description:
    The server is failing to download some updates.
    This error is happening everyday. Please advise for a fix.
    If this is happening on an UPSTREAM server it is because you have approved updates that are no longer available from Microsoft. Almost always this involves approvals of *EXPIRED* updates (which have been pulled from the catalog and cannot be downloaded).
    If this is happening on a DOWNSTREAM server it's because something/someone deleted the files from the upstream server. It can also happen if the entire upstream ~\WSUSContent folder has gone amuk.
    For an upstream server, find the expired updates, remove the approvals, cancel the downloads, and then decline the updates.
    For a downstream server, figure out what the affected updates are and fix the upstream server.
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Maybe you are looking for

  • PNG fix for PluginLab menus

    I use the PluginLab menu extensions for DW, but have yet to come across a reliable PNG fix. They claim they're working on one; I have seen Bob Osola's and will try to get it to work in the meantime... http://homepage.ntlworld.com/bobosola/index.htm

  • Generating forms from Designer... bug?

    Sorry for offtopic.... I'm trying to generate form from designer. The form has 1 data module with base table & one lookup table usages. One field from lookup table is displayable. When I set "Display type" property of this field "Text" disigner says:

  • TDMS implimentation

    SAP Gurus, Has anyone implemented SAP TDMS? We are looking at tools for scrambling SAP HCM data. There are 3rd party tools like Accenture clone and test. But, we are also interested in looking at SAP products. What I would like to know is the cost of

  • Western Digital My Book Pro - WDBMService Crash

    Anyone having trouble with the My Book Button Manager Service crashing after upgrading to Leopard? Doesn't seem to impact the operation of the drive but I keep on getting crash reports. I haven't seen any Leopard updates on the Western Digital site.

  • New computer, download premiere and there is no playback after importing files.  Any ideas what's happening?

    New computer, download premiere and there is no playback after importing files.  Any ideas what's happening?