DDP 2.0 file - Errors found by Technicolor

I sent off a DDP 2.0 file to Technicolor last week and when they loaded it up into their system tons of errors came back. It is a very simple DVD project. 2 motion menu pages. One hour long show. Thats it. Below is a read-out of their error log. Anyone know what's up with it? Thanks!

[Some threads discussing VOBU Errors|http://discussions.apple.com/search.jspa?threadID=&q=length+number+of+sectorsdisagree&objID=f952&dateRange=all&userID=&numResults=15&rankBy=10001]
Take a look through those threads and the issues. Sometimes depending on the version of Eclipse and DVD SP there can be false errors. How did you send them the DDP, on DLTs? If DVD-+/-R they can be unreliable and throw the VOBU error (the Red Icon Error)
Also people like Trai www.dvdverification.com are real good in knowing pretty much every error and how to troubleshoot them.

Similar Messages

Error on WWI server EHS_GLM_GENSERV: Results file not found on production

Hi Experts,
I need some help/advice. We have issues with our new EH&S WWI server.
This new setup working OK with Dev and QA (the WWI and GLM part is just fine), We did try to link this server to production then it gives below error.
Only difference between existing WWI QA and production server is that
Existing QA and development WWI server installed at location C:\Program Files (x86)\EHS\WWI
And Same path maintain on new server C:\Program Files (x86)\EHS\WWI
But existing production WWI server installation path is different C:\Program Files\EHS\WWI
So is there any customizing changes required from SAP side to avoid this error on production
Can you please advise on this.
================================================================================
Error on WWI server EHS_GLM_GENSERV: Results file not found
Message no. C$830
Diagnosis
The results file of the generation was not found on the WWI server EHS_GLM_GENSERV.
System Response
Generation was not carried out.
Procedure
Advise your system administrator to check the WWI installation on the WWI server EHS_GLM_GENSERV.
Check the Windows event log on the WWI generation server. The event log may contain other error messages.
SAP Note 1058521 provides possible solutions for this error.
==================================================================================
Log shows
============================================================================================================================================
E000 Error: OLE Exception (-2146823114) from Word8_OpenDoc (docs.Open) by Microsoft Word: This file could not be found. (C:\Windows\...\r00000000000001422051.rtf) (HRESULT Code:5174)
E000 Error opening document (Word8_OpenDoc: Documents.Open failed)
================================================================================================================================================

Hello Gajanan,
the path of the temporay workfolder can be configured in the IMG. Often this path is setup as the WWI server installed location but it is just a temporay workfolder which must exist on the WWI server. The path can be configured under:
For ECC 6.0 Ehp 0-2 and lower
Environment, Health and Safety -> Basic Data and Tools -> Basic Settings -> Specify Environment Parameters
For ECC 6.0 Ehp 3-6
Environment, Health and Safety -> Product Safety -> Global Label Management -> Make Settings for Basic Data
For ECC 6.0 Ehp 7
Environment, Health and Safety -> Global Label Management -> Set Basic Data and Tools for Global Label Management -> Make Settings for Basic Data

Cannot delete file error -43 file not found

I cannot find and/or delete a file. The error is -43 file not found. It prevents me form making a backup with carbon copy.
The file was in applications / illustrator / legal / strangecharacters.html (now in trash) and size 112kb.
I am the admin of the machine on OSX 10.4.8
I have read & write permissions
Owner og the file is system.
I cannot change the filename: Unexpected error code -43!
I cannot change owner: Unexpected error code 213!
I cannot drag the file out of the containing folder i.e. legal (i get grayed stop icon instead of the expected green plug icon at the mouse pointer).
I can drag the legal folder around i.e. to the trash.
I can not delete the folder and its contents with empty or secure emtpy trash.
I tried:
Repairing privileges. Nothing to repair, all is well.
Rebuilding Locate Database but got 'cannot find the file code-43' while the folder was still in its original location: applications / illustrator /
I logged out and back as admin and different user.
I restarted.
I tried to delete the file via Terminal with rm and with command below as suggested by apple technote. The result is not as desired:
% chflags -R nouchg /Users/macuser/.Trash/Legal\ 22-06-59/Tie\314\202\314\201ng\ Vie\314\202\314\243t.html
chflags: /Users/macuser/.Trash/Legal 22-06-59/Tiếng Việt.html: No such file or directory
I started up from a different volume and tried the above.
Anyone?

as in my previous post, i found that part of my hard drive directory was corrupt. .ie. short version: there was a discrepancy between what the directory knew to be on the disk and what the finder showed me...
so i did a startup in single mode (command-s) and type fsck -fy at the prompt to do a disk repair. took aout three runs and 20 minutes but after that i got the desired message: disk appears to be ok. i typed reboot which restarted the machine. i then ran disk utillity repair privileges.
everything now is fine.
note: working with bluetooth keyboard and mouse in single mode worked on my G5 (not sure though if this applies to all models), also fans make a lot of noise, like your machine is about to take off... dont worry)
hope this helps
G5dual Mac OS X (10.4.5)

I get error message''one file not found'' when tring to sync Ipod Nano 6th gen to I tunes. Help

I get error message''one file not found'' when tring to sync Ipod nano 6th gen to Itunes. Help

See:
iTunes cannot sync... apps not determined installed on...: Apple Support Communities
installed apps could not be determined...: Apple Support Communities

'Error loading plugin: Plugin file not found' message on ONLY 5 sites, but all others OK. Help, please!

Hi Again!
I posted this problem here before, but since I really need to access the sites that receive this error message in less than a month, I had to re-post; hopefully someone who didn't see it before will see it & have a solution for me.
Here are the details: I'm running windows 8.1 & I use Firefox 33.1.1, Pale Moon 25.1.0 or Opera 26.0 as my browsers, (I have IE installed & up-to-date, but I never use it). I followed the 10-point checklist on Adobe & everything was done, except for "uncheck Hardware Acceleration" in Flash 'Settings'; I tried to uncheck it on this site, where it's indicated, as well as in my 4 browsers when I'm doing something that uses Flash, but no matter how hard I try, I can't 'uncheck' the check mark in that tiny box! Since this error problem only affects 5 web sites, & I can watch streaming media on all other sites, I don't think it's an issue.
Here's how this problem began: I was watching a live, streaming nest-cam on 5/09/14 around 11:00AM, (yes, I DO know the exact time & date, because it happened so suddenly while I was watching this website that I'd been watching since the end of February, 2014), when my screen went black. I thought it was probably an Adobe Crash, but when the usual Crash Report window didn't show up, I just closed Firefox & reopened it, expecting to resume watching the nest-cam. When I went back to the site, I got the black screen with the "Error loading plugin: Plugin file not found" message. The chat portion on the site still works, though. I know there are other sites with this nest-cam feed, so I started trying them, but it took several tries for me to find one that didn't get the error message! I posted this problem on "Windows BBS" forum, & someone else posted that the same thing happened to them AND on the same sites! They didn't have a solution, either. I cleared my cache, rebooted my PC & even did a System Restore, but whatever happened in that brief second made using ONLY 5 sites impossible. Here are the sites that receive the error message:
http://pixcontroller.com/eagles, (but I CAN go to http://pixcontroller.com, but there isn't any streaming media)
http://cbslocal.com/eagles
http://westmorelandconservancy.org/BlueBirdwebcam-1.htm
http://wildearth.tv/cam/pittsburgh-bald-eagles, (I get the error message on ALL cams on this site)
http://aviary.org/BE-NestCam1 (I get the error message on ALL cams on this site)
Now if any videos from the 5 websites above are uploaded to YouTube, I can watch them perfectly...no error message if I watch the videos elsewhere. Luckily, I found Ustream, & they have most of the nest cams I watch, but I need to fix this issue, because it's nearing nesting time! I'm an amateur nest-watcher & it's vital that I have access to these 5 sites, so if anyone knows how to fix this, PLEASE tell me!
Thanks for taking the time to read my post.
All suggestions/solutions are gratefully accepted.
Thanks in advance for your help!
DogPal

File Not Found Error in Welcome Screen
07-Nov-2013 10:25
Tags: #dreamweaver_cs6_update
Help please!
Live preview also not working.
I have exactly the exact problem described below but do not have a folder with the same name as the volume created under the volume. Please can someone help - I've tried everything. This problem only happened when I upgraded to Dreaweaver CC!
"On launching Dreamweaver on your Macintosh if your Welcome Screen is not loading and if you see a "File not found" error, please check if you have a folder with the same name as your volume created under the volume. For more info on this please go through the attached pdf document. Other dialogs/panels in dreamweaver that will be blank due to this issue are Jquery Swatches panel, Adobe Edge Webfonts tab in Manage Fonts dialog,W3c Error Info dialog, Externalise Javascript dialog and svn revert dialog. After following the changes mentioned in the attached document please check all the affected dialogs/panels to confirm everything is working as expected."
Thanks,
Martin Bond
[personal information removed by moderator]

I am trying to install livecycle trial version, but i get Error 13:11 Source file not found

Why do they even offer a free trial version of livecycle es4, when its obviously not free??????
i have tried from two different computers, windows 7 and windows 8, and before it can finish installing,
a messsage pops up saying Error 13:11 Source file not found verify file exsist. what does that even mean?

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

I am trying to install adobe livecycle designer es4 trial version on my computer and i keep getting the message Error 13.11 Source file not found: c:\ verify that the file exist. I have tried to install on both windows 7 and windows 8 and i still get the

error 13.11 Source file not found verify that the file exsist

Try a more recent version of my advice. The "for older video cards version" may work when the default version doesn't.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Import AOL Communicator mail failed. Error: no valid mbox files were found

I´m having problems to import (archived) AOL Communicator mail messages into Mac Mail. After choosing File > Mailboxes > Import data from "Other" and then selecting the the folders "LIbrary" > "Application Support" > "AOL Communicator" > "local" > "Archives.sbd", I always get the error message: no valid mbox files were found.
(Actually the Received and Sent files in the Archives.sbd subfolders are NOT highlighted, even though the Archives.sbd and it´s subfolders (like myaolmail.sbd) are.)
Mac Mini Mac OS X (10.4.5) AOL Communicator for Mac
Mac Mini Mac OS X (10.4.5)

Hi,
I am in the same situation (just posted myself!), and am trying this out right now:
http://www.apple.com/downloads/macosx/internet_utilities/aolserviceassistant.htm l
Maybe it will work for you?
Good luck,
Allyosn

Why does FCP error "File Not Found" when I try to open my sequences????

I recently updated all of my software and the following day I started getting errors "file not found" when I would try to open a sequence. Now all of my sequences are being lost and I am losing time and money because I can't meet deadlines! This *****!!! With one sequence I had to reedit the entire thing from scratch and when I did for some reason the old one would then open. But the next time I opened FCP both sequences would error out. Following the "file not found" the computer responds with another error "error: out of memory" What the devil is going on with this crap?

I seem to have figured out what my problem was. After trying to build the same project (that failed on the Mac Pro) on my laptop and encountering the same errors, I realized that the problem had to be with one or more of my assets and not my new version of FCP, since my PowerBook is running FCP 5.0.4 and my Mac Pro is running FCP 5.1.2.
In my case the "corrupt" file was a Photoshop PSD file. In the past (FCP 4.5) I was able to use PSD files with hidden layers. I would merge the visible layers into one layer, keep the hidden layers and save the file. Once in FCP, I imported the PSD file and kept right on truckin'. I've done this for years. For some reason now with FCP 5.1.2 (and 5.0.4), that's not flying anymore. Once I "Flattened" the PSD file in Photoshop (deleting all of the hidden layers) I was able to build the project without any errors.
Interestingly, the technique I used to figure out which file was "corrupt" also allowed me to salvage parts of some of my "lost" sequences. I saw this posted in a forum at Creative Cow (creativecow.net). Basically, I opened up the project, clicked the OK button after the File Not Found error, went into the Browser, right clicked on the offending sequence, selected "Make Offline". When I double clicked the sequence it opened in the timeline with all of my assets offline. Then in the timeline, one by one, I right clicked on each clip and selected "Reconnect Media". Once I linked up the media, if I didn't get an error message, I would save as a new project (to salvage what WAS working), and go to the next clip. I did this until I found the offending PSD files.
I hope this helps. Now it's time to play "catch-up"
Mac Pro 3Ghz, 1GB RAM, ATI Radeon X1900 XT Mac OS X (10.4.8)

Error 404: SRVE0190E: File not found when trying to access jsp

I am using RAD (new to web dev) for some reason my app is unable to find .jsp's when they are not in the web content folder. I have a predefined package for my jsp's and when I run my servlet I get
Error 404: SRVE0190E: File not found: /WEB-INF/classes/app/view/search.jsp
now if I amend my URL in the servlet to "/search.jsp" and move the jsp to the web content folder, it works. I just don't understand why it cannot find the file when I put it in the package I created and link to it, but finds it just fine in the webcontent folder. Is there some unwritten rule JSP's MUST be in the webcontent folder? Because when i do that, then I have issues with my image links for the GUI (get red X's for all my images regardless of the fact they are linked properly.) Basically if I put my jsps where I want, look fine in design and preview, but the jsp isnt found when executed, if I move them to the web content folder the images no longer work but the jsps run. I am getting rather frustrated. Any help is appreciated.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
See also:
*https://support.mozilla.org/kb/Clear+Recent+History
Are you using cleanup software like CCleaner or other software that may corrupt the cache?
You can try to delete the entire cache folder. 
You can find the location of the cache folder on the about:cache page (open via the location bar, like a web page).
You can check the browser.cache.disk.enable pref on the about:config page to verify that the disk cache is enabled (should be true).

Java File not Found Exceptions and other errors?

Hello experts, an issue on our Portal has caught my attention. Every time the J2EE Engine is restarted, a large amount of errors are written on our Trace files. When looking at the trace files, I see that most errors are Java IO File not Found Exceptions. For example:
[EXCEPTION]
#1#java.io.FileNotFoundException: ./log/system/database.1.log (No such file or directory (errno:2))
 at java.io.FileInputStream.open(Native Method)
 at java.io.FileInputStream.<init>(FileInputStream.java:106)
 at java.io.FileInputStream.<init>(FileInputStream.java:66)
 at com.sap.engine.services.log_configurator.archive.ArchivingThread.archiveTask(ArchivingThread.java:77)
 at com.sap.engine.services.log_configurator.archive.ArchivingThread.run(ArchivingThread.java:40)
 at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
 at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
 at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
#1.5 #0012799E98F6000F0000001800003A9E00044A5F2B9CCDEC#1207672520886#com.sap.engine.services.log_configurator.archive.ArchivingThread##com.sap.engine.services.log_configurator.archive.ArchivingThread######c3cfd920058911dd8ace0012799e98f6#SAPEngine_System_Thread[impl:5]_24##0#0#Error##Java###./log/system/server.1.log (No such file or directory (errno:2))
[EXCEPTION]
#1#java.io.FileNotFoundException: ./log/system/server.1.log (No such file or directory (errno:2))
 at java.io.FileInputStream.open(Native Method)
 at java.io.FileInputStream.<init>(FileInputStream.java:106)
 at java.io.FileInputStream.<init>(FileInputStream.java:66)
 at com.sap.engine.services.log_configurator.archive.ArchivingThread.archiveTask(ArchivingThread.java:77)
 at com.sap.engine.services.log_configurator.archive.ArchivingThread.run(ArchivingThread.java:40)
 at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
 at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
 at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
#1.5 #0012799E98F6000F0000001900003A9E00044A5F2B9CE7BC#1207672520893#com.sap.engine.services.log_configurator.archive.ArchivingThread##com.sap.engine.services.log_configurator.archive.ArchivingThread######c3cfd920058911dd8ace0012799e98f6#SAPEngine_System_Thread[impl:5]_24##0#0#Error##Java###./log/system/security.1.log (No such file or directory (errno:2))
[EXCEPTION]
#1#java.io.FileNotFoundException: ./log/system/security.1.log (No such file or directory (errno:2))
 at java.io.FileInputStream.open(Native Method)
 at java.io.FileInputStream.<init>(FileInputStream.java:106)
 at java.io.FileInputStream.<init>(FileInputStream.java:66)
 at com.sap.engine.services.log_configurator.archive.ArchivingThread.archiveTask(ArchivingThread.java:77)
 at com.sap.engine.services.log_configurator.archive.ArchivingThread.run(ArchivingThread.java:40)
 at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
 at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
 at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
#1.5 #0012799E98F6000F0000001D00003A9E00044A5F2BE5C172#1207672525667#com.sap.engine.services.log_configurator.archive.ArchivingThread##com.sap.engine.services.log_configurator.archive.ArchivingThread######c3cfd920058911dd8ace0012799e98f6#SAPEngine_System_Thread[impl:5]_24##0#0#Error##Java###./log/applications.1.log (No such file or directory (errno:2))
[EXCEPTION]
#1#java.io.FileNotFoundException: ./log/applications.1.log (No such file or directory (errno:2))
 at java.io.FileInputStream.open(Native Method)
 at java.io.FileInputStream.<init>(FileInputStream.java:106)
 at java.io.FileInputStream.<init>(FileInputStream.java:66)
 at com.sap.engine.services.log_configurator.archive.ArchivingThread.archiveTask(ArchivingThread.java:77)
 at com.sap.engine.services.log_configurator.archive.ArchivingThread.run(ArchivingThread.java:40)
 at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
 at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
 at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
In summary, the system cannot find the files server.1.log, security.1.log, database.1.log and applications.1.log. I tried manually adding these files (I created them on my computer and left them empty) on the path written, but it did not work, for some reason they are deleted.
Another error that is happening during restart of the engine is the following:
#1.5 #0012799E98F6001B0000002000003A9E00044A5F2BCC28D7#1207672523990#com.sap.tc.logging##com.sap.tc.logging.APILogger.FileLog[setFormatter()]######c3c3f240058911dd9ed80012799e98f6#SAPEngine_System_Thread[impl:5]_10##0#0#Warning##Java###Attempting to change a formatter on active log ./log/system/httpaccess/responses.trc. reset() method must be called first.#1#java.lang.Exception: Attempting to change a formatter on active log ./log/system/httpaccess/responses.trc. reset() method must be called first.
 at com.sap.tc.logging.FileLog.setFormatter(FileLog.java:448)
 at com.sap.engine.services.log_configurator.admin.LogConfigurator.adjustConfiguration(LogConfigurator.java:795)
 at com.sap.engine.services.log_configurator.admin.LogConfigurator.applyConfiguration(LogConfigurator.java:1535)
 at com.sap.engine.services.log_configurator.LogConfiguratorContainer.prepareStart(LogConfiguratorContainer.java:545)
 at com.sap.engine.services.deploy.server.application.StartTransaction.prepareCommon(StartTransaction.java:223)
 at com.sap.engine.services.deploy.server.application.StartTransaction.prepareLocal(StartTransaction.java:176)
 at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesLocal(ApplicationTransaction.java:365)
 at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:132)
 at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesLocalAndWait(ParallelAdapter.java:250)
 at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationLocalAndWait(DeployServiceImpl.java:4450)
 at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationsInitially(DeployServiceImpl.java:2610)
 at com.sap.engine.services.deploy.server.DeployServiceImpl.clusterElementReady(DeployServiceImpl.java:2464)
 at com.sap.engine.services.deploy.server.ClusterServicesAdapter.containerStarted(ClusterServicesAdapter.java:42)
 at com.sap.engine.core.service630.container.ContainerEventListenerWrapper.processEvent(ContainerEventListenerWrapper.java:144)
 at com.sap.engine.core.service630.container.AdminContainerEventListenerWrapper.processEvent(AdminContainerEventListenerWrapper.java:19)
 at com.sap.engine.core.service630.container.ContainerEventListenerWrapper.run(ContainerEventListenerWrapper.java:102)
 at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
 at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
 at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
Any ideas?

Nothing really seemed to work when trying to solve this problem, just suddenly it stopped appearing. It might have been our installation of SPS 15, since it was around that time that the error went away.

[SOLVED] == ERROR: file not found: `/sbin/dmsetup'

[EDIT] A much simpler way to deal with this is to explicitly ignore the kernel update during a full system update:
pacman -Syu --ignore linux
Then explicitly update the kernel alone:
pacman -S linux
[EDIT] First, after a full system update I had to move the STUB kernel image from the UEFI directory back to /boot, them recreate the images a second time. The systemd service moved it back to the UEFI directory.
[EDIT] The use of 'mdadm_udev' in HOOKS= also seems to be no longer just 'preferred' to the 'mdadm' hook but instead is now mandatory.
I've read the news item...
Changes to LVM
2013-02-12 - Thomas Bächler
With lvm2 2.02.98-3, we now utilize lvmetad to activate LVM volumes automatically. This implies the following changes:
The lvm2 initramfs hook now requires the udev hook.
The use_lvmetad = 1 must be set in /etc/lvm/lvm.conf. This is the default now - if you have a lvm.conf.pacnew file, you must merge this change.
You can restrict the volumes that are activated automatically by setting the auto_activation_volume_list in /etc/lvm/lvm.conf. If in doubt, leave this option commented out.
If you need monitoring (needed for snapshots), run systemctl enable lvm-monitoring.service.
The lvmwait kernel command line option is no longer needed and has no effect.
If you run pacman -Syu and update device-mapper, linux and lvm2 at the same time, you will get an error message that /sbin/dmsetup is missing. Run mkinitcpio -p linux again after the update to avoid any problems.
...and I do get the message...
==> ERROR: file not found: `/sbin/dmsetup'
...but after a full system update with...
pacman -Syu
...when I execute...
mkinitcpio -p linux
...this is what I get...
Building image from preset: 'default'
/boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
ERROR:specified kernel image does not exist: `/boot/vmlinuz-linux'
Building image from preset: 'fallback'
/boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
ERROR:specified kernel image does not exist: `/boot/vmlinuz-linux'
So of course if I reboot I get the dreaded 'No volume groups found' message.
I should mention that I use the systemd path and service to move the kennel after it has been updated.
Last edited by KairiTech (2013-04-07 02:45:12)

With lvm2 2.02.98-3, we now utilize lvmetad to activate LVM volumes automatically. This implies the following changes:
The lvm2 initramfs hook now requires the udev hook.
The use_lvmetad = 1 must be set in /etc/lvm/lvm.conf. This is the default now - if you have a lvm.conf.pacnew file, you must merge this change.
You can restrict the volumes that are activated automatically by setting the auto_activation_volume_list in /etc/lvm/lvm.conf. If in doubt, leave this option commented out.
If you need monitoring (needed for snapshots), run systemctl enable lvm-monitoring.service.
The lvmwait kernel command line option is no longer needed and has no effect.
Just to confirm. You did all these steps, right?
EDIT: I just noticed something:
KairiTech wrote:HOOKS="base udev autodetect sata mdadm usbinput keymap encrypt lvm2 filesystems timestamp shutdown"
Replace
mdadm
with
mdadm_udev
. Maybe this is nothing, but it is recommended to use this one instead of the other.
NEW EDIT: Expecially this one
The use_lvmetad = 1 must be set in /etc/lvm/lvm.conf. This is the default now - if you have a lvm.conf.pacnew file, you must merge this change.
Last edited by s1ln7m4s7r (2013-03-24 20:42:55)

"File not found" error when I try to render an animated menu (on mac) Encore CS4

I'm making a dvd with at least 2 animated menus. It means that I have a 1 movie in the background of each menu. Over my background, I have 3 thumbnail buttons which contain a small piece of movie animated movie too. When I try to to view my menus, in order to see the animation in the background and in the thumbnails I need to render the animation through File - Render - Motion menus.
The problem is that it works for the first menu but then when I continue my navigation to the second menu that has animation in background and thumbnails too, if I choose Render Motion menus,after 3/4 of the rendering it says "file not found" even if all the files are well in place in their folders.
Does anyone would have an idea of how to resolve this stupid problem that prevents me to burn my project on a DVD since the same errors will appear during the burning process (I use a mac with Encore CS4). Is it a bug? What are the solutions? Thanks for answering.
Steven.

SteveDVD,
The use of the .WMV was because that was part of the Library .EM template. I would not anticipate problems with other formats, so long as they are supported and the same for all of your Menus in the Project.
If you have done several Motion Menu Renderings, you might want to clear Encore's Media Cache, just in case it is still referencing previous Render files.
And yes, the re-Importation should yield the same result as Linking/re-Linking.
Unfortunately, I do not have CS4, so I can't test this for you. There do seem to be a few real Bugs in the various CS4 programs, and maybe this is one?
That "File Not Found" rings a bell in my feeble brain. Seems that there was a post on that, but I do not remember it being related to Motion Menus. Maybe search will yield something of use.
Good luck,
Hunt

Error 7 Build Error - File not found

I am trying to build my software to another computer over the network. I am able to access the directory I am installing to and the program is not indicating any build errors(all VI's are not broken). This error only occurs when building. Any suggestions would be great.
Thanks,
Nate
The Build was unsuccessful
Possible Reasons: An included VI or one of its dependencies does not exist. Open all Startup/Exported/Dynamically called VIs, recompile them (Ctrl-Shift Click the run arrow), and save them to update their dependencies.
\\PAINESTORAGE\Engineering\Test & Manufacturing Software\AutoTest Software\Current Version\AutoTest ...
Extended Details: Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
Error 7 occurred at ABAPI Dist Report Read Link Info Error.vi -> ABAPI Dist Cmp Settings to Disk Hier.vi -> ABAPI Get Settings From File2.vi -> EBEP_Invoke_Build_Engine.vi -> EBUIP_Build_Invoke.vi -> EBUIP_Build_Rule_Editor.vi -> EBUIP_Item_OnDoProperties.vi -> EBUIP_Item_OnDoProperties.vi.ProxyCaller
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
=========================
NI-488: Non-existent board.
-Nate
Solved!
Go to Solution.

Is there a way to see a report of the dynamically called VI's? I inherited this software and am relatively new to LabView...
-Nate

Error File not Found in CS 5.5

When I go to open up PP CS 5.5 it provides a list of possible projects I can open up. Click on a project and it opens accordingly. However, over the past 2 days it has become problematic. I can click on the listed project but I now receive an error message: Error file not found. PP will not open up. I haven't moved any files, folders or projects around. I have simply closed the project, quit PP and then opened it again when wanting to edit. I have tried opening up the auto saved project file and I receive the same message?

Hi Todd both your solutions (and the one suggested by Colin) works initially. Dbl click the project file and it opens PPro. However, I tried this on another project which has a 3rd party pllugin (Smartsound Sonic Fire Pro) in it. Things get interesting with Smartsound being activated with me unable to quit out of it and I am not able to access Premier Pro. I have to Force Quit both programs. Then when I try to dbl click on the program that opened up OK the error message returns: File format not supported. There is no Smartsound file involved in this project? Same thread? New thread? many thanks for your responses

DDP 2.0 file - Errors found by Technicolor

Similar Messages

Maybe you are looking for