DDP file problem

Hi There
I mastered out a dual layer project to 2 DLTs using DVDSP 4.1.2. I read the DLTs back and burnt a DL DVD-R in Toast as a test disc (knowing that Toast would create its own layer break point). The test disc worked fine. So I delivered both a PAL and NTSC version to the client, both with working test discs ex DLT.
This was 2 months ago - I get a call yesterday saying they have just heard from the replicator (in China - I'm in Australia) that Layer 1 of both versions won't read, apparently Layer 0 is reading fine though???
So I re-exported both versions as DDP 2.0 files to single layer DVD-Rs, Layer 0 on one disc, Layer 1 on another and sent them off in a rush as my client is going to press tomorrow. I've just fired up my brand new copy of DVDAE and done a test export of the DDP 2.0 files to compare and I have come across a discrepency that I hope someone can explain to me.
In my DVDSP DDP 2.0 file folders both Layer 0 and Layer 1 folders contain 3 files, CONTROL.DAT, DDPID & MAIN.DAT. In my DVDAE DDP2.0 file folders, Layer 0 contains the same three files, but Layer 1 only contains 2 files, DDPID, and MAIN.DAT.
Is DVDAEs version of the DDP files the way it should look?
Would the presence of the CONTROL.DAT file in Layer 1 of the DVDSP created DDP file folder cause the replicator to reject the Layer 1 DLTs?
With the new DVD-R versions of the DDP files I've created from DVDSP - if the CONTROL.DAT file is removed from the Layer 1 folder, should it work then?
Thank you in advance for any advice you can give me.
Cheers
Brent

See:
* http://kb.mozillazine.org/Links_to_local_pages_do_not_work

Similar Messages

WB DDP-files corrupt?..

Hello,
I just discovered that when I import a DDP-file (that was made with WaveBurner 1.6.1) into Wave Editor, the first two mandatory silent seconds at the beginning of the CD are missing. This means that all track indexes are moved by two seconds, messing up everything..
Has anyone else experienced this problem?..
Thanks.

We produce DDP files from Encore for replication of DVD5 discs. You should first build an image and test to make sure there are no issues.
I do not recommend creating DDP files from Encore for Dual Layer (DVD9) replication, as Encore has all kinds of issues with the layer break. For DVD9, I recommend building a folder, fixing all the layer break issues with PGC Edit, then creating the DDP in Gear Pro Mastering. If you are Mac based, you can fix the folders and create the DDP using DVDAfterEdit.
The only time when you can use Encore to create DDP for DVD9 is when the layer break is placed between videos. You can create an ISO image and use ImgBurn to see where the layer break was placed. If it was placed in the middle of a video, it must be fixed in PGCEdit or DVDAfterEdit. If it placed it between videos, it should be safe to create the DDP.
Also, make sure you add an empty "AUDIO_TS" folder in the build tab of Encore, as most replication facilities like to have it there to meet the DVD specifications. To add the folder, create a folder that contains just an empty AUDIO_TS folder, then add the parent folder in the build tab. You can build an ISO image to see that you have both an AUDIO_TS and VIDEO_TS in the root of the disc.
You can also specify CSS copy protection before building the DDP. Macrovision has hefty licensing fees, but CSS is fairly cheap to implement (we can do it for $16 per layer).
When delivering the DDP files to the replication facility, they will probably want you to burn them as data files to the root of a DVD-R. If it is DVD9, you can split the different layers (layer 0 and layer 1) on to two separate DVD-R discs.

DW CS5 Missing Related Files Problem

Hello
Hoping somebody may be able to help me with a missing related files problem in CS5. I've tried Adobe phone support but they couldn't solve the problem.
*Some* of my sites (but not all) are not showing all the files related to that page. My pages are typically in .asp vb server model and contain .asp virtual includes (header, nav etc) plus .js and .css linked files
However DW is only showing the .asp includes as related files and not css or js ones. In design view the CSS is displaying correctly, and all styles appear in the CSS inspector but not showing as a related file in the bar. In CS4 it works fine.
I've tried deleting the site and recreating it, copying the files to a new folder and setting up a fresh site, creating a new folder and downloading all files from the remote server but no joy. I've also tried refreshing related files. if I click on the filter in the bar it only shows the asp includes and nothing else.
Any help would be gratefully appreciated, this is a great feature when it works
Cheers
MB

UPDATE:
Managed to solve this problem, this is a new issue to DW CS5, previous versions do not seem to exhibit this problem
It occurs when you use site root rather than document relative paths for js/css etc files AND don't have the remote site url (web url) specified in the site setup | local info dialog, or do not have it fully qualified with http://
ie. ../js/file.js works fine without a remote web url but /js/file.js does not show the related file in the bar unless a remote url is defined.
Hope that helps anyone else that encounters the same issue!
MB

With conversion to Leopard, file problems with networked Windows computer

Last night I did an Archive & Install from Tiger to Leopard on my Intel MacBook Pro. Today, I had trouble finding the other computers at my office. Once I finally got them to show up, I opened a Word file found on another computer, made some changes, and when I tried to save it, I got this message: "This is not a valid file name. Try one or more of the following: *Check the path to make sure it was typed correctly. *Select a file from the list of files and folders." Since this file already existed and I wasn't changing the name, I thought this was odd, but I changed the name from "Seating Chart 3-8-08" to "SeatingChart3-8-08" in case Leopard didn't like spaces when talking to Windows, but I got the same error message. Finally I gave up, not knowing what to do, then discovered that it had in fact saved my file. Still, every time I try to save ANY Word document from the shared folder of the Windows computer, I get the same error message endlessly until I choose "Don't Save."
When I try to open an Excel file from that computer, it won't even open; it says " 'File Name.xls' cannot be accessed. This file may be Read-Only, or you may be trying to access a Read-Only location. Or, the server the document is stored on may not be responding." As with the Word file problem above, I did not have any problem accessing the files until I converted to Leopard.
The Windows machine is Windows XP using Microsoft Office 2003; I have Microsoft Office 2004 on my machine.

See if this Link, by Pondini, offers any insight to your issue...
Transfer from Old to New
http://pondini.org/OSX/Setup.html
Also, See here if you haven't already...
http://www.apple.com/support/switch101/ Switching from PC

I have problem in quicklook for mp4 files in my mountain lion os 10.8.2 so please help me what i need to do? but i can view mov,3gp,jpeg files problem is only with mp4 files.... any one help me...

I have problem in quicklook for mp4 files in my mountain lion os 10.8.2 so please help me what i need to do? but i can view mov,3gp,jpeg files problem is only with mp4 files.... any one help me...

I have problem in quicklook for mp4 files in my mountain lion os 10.8.2 so please help me what i need to do? but i can view mov,3gp,jpeg files problem is only with mp4 files.... any one help me...

Anyone know if the long standing duplicate files problem with File History has been fixed yet?

There are loads of public threads about the duplicate files problem
with Windows 8/8.1 File History backup system.
From all the threads I've looked at, there seems to be no solution,
and no acknowledgement from MS that they can even repro the problem
(which surprises me considerably as there are so many people who
notice the problem).
Is anyone aware of whether MS (may) have fixed this for Win10?
Are MS aware of the problem and if they're able to fix it?
Dave - with many GB of duplicated files in File History :)

Hmm, is that the attitude MS would recommend? :)
Why would I care what Microsoft would recommend?
Clearly you don't, and you appear to have missed my smiley. Calm down
Noel, many of us are as annoyed by aspects of modern Windows as you
are. :)
I'm all about making Windows actually WORK/./
Aren't we all? Windows is software I use too many hours every day, I
along with many millions of others need it to work really well. You
are not alone.
When they implement something that doesn't work, and even if it did work doesn't do what's needed - and/beyond that/ they remove features people DO need (such as the GUI for Windows Backup), I see no wrong in advising people of the way things
really are.
File History essentially does work - it's saved me a couple of times
in the past couple of weeks. It just has a highly annoying habit of
creating 100% duplicates of some files for no apparent reason. If MS
have fixed that I won't have any known complaints about it.
If you don't like it, you don't have to use it. I generally like it, I
just want to see that its fixed.
Dave

Idoc to file problem.......... IDOC lost

i have a idoc to file problem,
the idoc is sent from R/3 to XI,
the problem is IDOC is sent from R/3,
it didnt reach to XI.....
i have checked.......we05 in R/3, it gives a status 3,
then i checked SM58 in R/3, it shows nothing,
when i check in idx5 in XI, theres no trace of that idoc....and no trace of the scenario run in SXMB_MONI
pls help, where can i trace the idoc.....
pls help

Hi sudeer,
Did You Check It In WE19.(Test Tool For Idoc Processing)
If Not Do The Following Steps:
Step1:
>> Give Your Existing Idoc Number.
Step 2:
>> Basic Type is Your Message type.
 Ex: MATMAS05 or CREMAS05.
Step 3:
>> In Your Existing MATMAS05 or CREMAS05 Structure say EDIDC,
>> You Should Fill Your Mapped Entries In Data Structure of EDIDC.
>> So that Those Fields Gets Framed as Segments.
Step 4:
>> After Doing It goto Menu Bar and Click Idoc And Goto Edit Control Record.
Step 5:
>> Now You Give Your Sender And Receiver Port Number Along With Your
 Logical System And Message Type again its Your MATMAS05 or
 CREMAS05 .
Step 6:
>> After Doing It Click Standard Outbound Processing.
Step 7:
>> It Will Say what Happened To your Idoc.
Step 8:
>> It Is For Sure That if This Processing Fails It Wont Go To XI..
Regards,
Dhayanandh .S
Dont forget To Provide Points If Found Helpful...
Message was edited by:
 DHAYANANDH SIVASANKARAN

TS5179 I've been bitten by the "Missing MSVCR.dll file" problem when downloading the latest iTunes update (PC w/ Win-7 & Outlook-2007#. 'Have followed Apple's instructions of un-installing all Apple software, and re-installing it. #out of space...??)

I've been bitten by the "Missing MSVCR.dll file" problem when downloading the latest iTunes update, 11.4.62 (on a PC w/ Win-7 & Outlook-2007#. 'Have followed Apple's instructions of un-installing all Apple software, and re-installing it (Ugh). First result Outlook couldn't find my 1,385 item contact file in iCloud, although the outlook distribution lists were there. Second result, upon installing iCloud again, I have two iCloud contact files shown in outlook - "iCloud" & iCloud, within iCloud". 1,332 & 1,385 contacts respectively.
Plus an iCloud installation error message saying iCloud moved 6,835 files to a "deleted items folder" somewhere. This is NOT fun at 72-yrs old...!!
So, how do I make sure I haven't lost anythying from Outlook?   Russ-AZ

Interesting response, Kappy - Back to original post: "First result: Outlook couldn't find my 1,385 item contact file in iCloud, although the outlook distribution lists were there (therefore, initially I had lost my contact file from Outlook). Second result, upon installing iCloud again, I now have two iCloud contact files shown in Outlook - "iCloud" & iCloud, within iCloud". W/ 1,332 & 1,385 contacts respectively.
Plus an iCloud installation error message saying iCloud moved 6,835 files to a "deleted items folder" somewhere. This is NOT fun at 72-yrs old...!!
So, how do I make sure I haven't lost anythying from Outlook?   Russ-AZ"
You can safely assume that I have tried using it!   So, to make things a little clearer:
     1) I now have two iCloud "contacts files", w/ a different total count. What's the difference? Why the different toatl count?
     2) Since re-installing the Apple software (part of the MSVCR" recovery instructions) "couldn't possible affected Outlook", why am I getting an iCloud installation error message saying iCloud moved 6,835 files to a "deleted items folder" somewhere. What's in those files? And where are they?
Probably more important questions get down to:
     3) Why is a basic Apple product upgrade "screwing-up Outlook"? This iTunes upgrade, failing to install properly forced Outlook 2007 into a 2-min start-up cycle. Which was fixed with this "Goat-Rpdeo" of re-installing MSVCR80.dll.
     4) And under the latest release of iOS-7.0.4 on our iPhones, why is Apple now forcing us to use the iCloud to back-up our contacts, calendars & tasks, vs. allowing these files to be backed-up directly on our PC's via the USB cable?
Thanks again for your interest and comments. - Russ-AZ

RMI class file problem

I have already write a RMI example for self-study successfully, but there are a little class file problem that I'm not able fix it.
In my RMI example there are 3 .java files (RMIServer.java, RMIClient.java and a MethodImpl.java)
After I have javac and rmic them, I got RMIServer_Skel.class, RMIServer_Stub.class, RMIClient.class and the MethodImpl.class
In order to run the RMI in a local envirnment, I divide them into 2 folders as listed below:
Server - RMIServer_Skel.class, RMIServer_Stub.class and the MethodImpl.class
Client - RMIServer_Stub.class, RMIClient.class and the MethodImpl.class
Then when I start to run them in a DOC envirnment...
start rmiregistry........(run successful and another rmiregistry DOC window created)
java RMIServer.........Exception in thread "main" java.lang.NoClassDefFoundError: RMIServer
Oops? Class not found? How can that be? And after that, I tried something.......to add the RMIServer.class into the Server folder.
Again, I start to run them in a DOC envirnment...
start rmiregistry........(run successful and another rmiregistry DOC window created)
java RMIServer.........The server is instantiated(run successful and print out a String)
Um...is the RMI have to run with a RMIServer.class file? But the RMI notes I refered from is not seems to be telling me to do this, are there any one can give me a helping hand?

please, go here, read thoroughly
http://java.sun.com/docs/books/tutorial/getStarted/cupojava/index.html

Locked file problem with WebDAV

I am using DreamWeaver CS3 on my Macintosh at home and on a
PC at work. I am connecting to my website via WebDAV, and for some
reason Dreamweaver cannot edit the files on the site. When I try to
check out any file I get an error stating: "file.html is locked and
can be viewed but not edited" I then have the option to check it
out or view or cancel. Regardless of what I do, if I continue and
open the file and make changes the file will not get updated on the
remote server even though Dreamweaver reports a successful "put" or
"check in" command in the log file. This happens on both the
Macintosh and the Windows PC. Both are also updated to the latest
versions of Dreamweaver.
The strange thing is, if I mount the WebDAV server as a
filesystem on my macintosh and authenticate with the same
login/password that entered in Dreamweaver's WebDAV settings, I can
edit the html files using a text editor and they save perfectly
fine. Additionally, while the web server is mounted on the desktop,
if I change Dreamweaver's site settings to "local/network" and
enter the locally mounted WebDAV share path instead of using
Dreamweaver's built-in WebDAV client, then everything works
properly in Dreamweaver. Reverting back to using WebDAV in
dreamweaver (as opposed to through the OS) brings about the same
"locked file" problem as before.
There appears to be a problem with Dreamweaver's WebDAV
access to the site, and I'm wondering if there's an easy fix or if
this has been experienced by others?
Thanks,
-Topher

Have a look at FileUtils::DecomposeUnicode and NormalizeUnComposedUnicodeChars. Use the first to convert before using i.e. FileUtils::PMStringToSysFile() and the later afetr i.e. FileUtils::IDFileToPMString().
HTH

Bat file problems with 5.2(3)

I'm having bat file problems with CCM 4.2(3) with bat version 5.2(3). When adding phone/users getting an error number -2146828279 with this message "Description -Subscript Out of range".

Hi Denis,
Just wanted to know if the description contained a comma? There was a bug in a previous BAT version that would affect phone/user inserts if there was a comma.
CSCsb61425 Bug Details
Headline BAT insert fails if phone description contains comma
This was in BAT 5.1.4
Hope this helps!
Rob

DDP file size Vs. Video_TS ?

I exported a DDP file that is 29 MB from my project. In DVD studio pro, the file size is 1 GB. My question is do I actually have the entire project in the 29MB DDP file?
Also, why do you have to send a DDP file to the hard drive and then copy to a DVD? Why can't you just send it to a DVD?

Sounds like something is amiss with that big a size difference, you do not have the entire project
Make sure you have set your build folder and are writing the DDP file from the proper build
http://dvdstepbystep.com/build.php

Tcode FILE problem

I am trying to use the Direct Input method in the LSMW (It is my first time using the Direct Input method) but I encounter a problem during the Specify File step saying that No Logical Path was specified. I look into the forums and they told me that I needed to define one with the FILE Tcode but when go to the FILE Tcode a message pops up saying Changes to Repository or cross-client Customization are not permitted.
What would cause this? How should I deal with it?

Hi Obie,
I guess you are testing in Testing client .
Do it in development client.
Mohinder

Macbook Air 11" i7 corrupt files problem with Adobe Illustrator CS4

Hi
this problem may not be entirely related but maybe someone could help anyways or knows how I can proceed...
I'm running Illustrator CS4 on a Macbook Air 11" (latest 2011 model, with i7, 4GB, 128SSD), and lately some files are getting corrupted. specifically, adobe illusrator CS4 files with weeks of work. interestingly, the time machine backups are also getting corrupted.
its like I'm working on a file for a few days, backing up with time machine as well
closes the file, after a few days returns to it… (normal behavior)
then when i try to get back to the file then sometimes it says "Cant open the illustration, could not complete the operation" and opens a blank canvas.
restoring the file via time machine also gives the same error (its like all versions get corrupted simultaneously), even 4-5 versions backwards, even though they worked before when the file worked
it happened quite a few times, ruining weeks of work.
I tried the following:
reinstalling CS4 - didn't work
Opening the files on CS5 - still don't open
doing the file recovery thing and then opening it in a notepad - didn't work at all
using Time machine - the files are still corrupt
it only happenes with AI files, not photoshop files, for example.
I thought maybe it has anything to do with SSD? since my previous macbook pro (15", 2007) never did these errors…
please help
Eido

If at all, this would be I/O performance and bandwidth issues with Time Machine, but I don't think that's the problem. More to the point I think that it's a case of Preview opening the files to genereate thumbnails and icons and something going wrong there. I'd look up some guides on how to edit the relevant plist and conf files to exclude your AIs or turn off the behavior to generate these previews globally. This may help hugely...
Mylenium

Spool file problem,Can't see the query in output file.

Hello ,
I am facing a very old school kind of problem .....about spool file ....
The scenario -
I have made a script by name DB_Status_checkup.sql which i want to fire on the database to check the database status. In this script their are many queries regarding the data dictionary views to know about the database. It consist of nearly 25-30 different select queries..
The problem is i want to make a spool file of the output of that query....i want to see the SQL query & the output below in the spool file, so it will be easy for me to judge the result. But i can't see the SQL query , i can only see the output , & in so many queries it all gets jumbled up....even i can't understand where the next output starts ...
Sample of my SQL Script ....
clear buffer
spool D:\DB_status.txt
/*To check the database startup time*/
Select to_char(startup_time, 'HH24:MI DD-MON-YY') "Startup time"
from v$instance
.........next query n so on....
spool off;
In the output pf the spool file at D:\db_status.txt..
Startup time
08:25 16-JUL-10It shows only the output of the query in the spool file not the query,
What should i do to get the SQL query as well as the output of that query just below it in the spool file ???
Please suggest if you have anymore ideas , regarding this .....
ORACLE 10g R2
Windows Server 2008
Thanks in advance ...

Why don't you just use database control, instead of re-inventing the wheel?
Apart from that, SQL*Plus has it's own reference manual, which you apparently refuse to read.
The answer to your quiz/doc question is
set echo on
Sybrand Bakker
Senior Oracle DBA

DDP file problem

Similar Messages

Maybe you are looking for