DDR3 or DDR3L? for the new iMac (late 2013)
Hi!
I'd like to buy the late 2013 iMac with 16Go installed and upgrade it to 32Go myself. I'm looking to buy 16Go of RAM, but I'm not sure whether it should be DDR3 or DDR3L...
Can someone help me?...
Thanks a lot!
DDR3: iMac (Late 2013): Memory specifications
Memory sold by the Apple Online Store is guaranteed to be compatible with your Macintosh.
Similar Messages
-
Can I install a Samsung 840 Pro 256GB into the new iMac late 2013?
Hi There,
1) Can a Samsung 840 Pro 256GB SSD be installed in the new iMac late 2013 model? (My plan is to remove the existing 1TB HDD and replace with the Samsung SSD)
1.1) I have heard somewhere, even though it will fit, Apple's logic board firmware will pick up the non-apple product and render the iMac useless until original hard drive is reinstalled.
1.2) If it will work, will I loose my warranty on iMac? Note, the SSD will be installed by an Apple authorized workshop.
2) Can 2x 2.5 sata drives be installed in the iMac?
2.1) I know the iMac only has 1x SATA and 1x PCIe slot, but can one not install a PCIe - SATA converter and also a 2x 2.5 drive bay in the place of the existing 3.5" drive?
Thanks for your assistance.
Regards,
asdutoitI checked on the Samsung website and the 840 Pro is OSX compatible and should work in your MBP.
http://www.samsung.com/us/computer/memory-storage/MZ-7PD256BW-specs
Ciao. -
i buy the new imac,late 2012 with a hard-drive 3TB and i want to change with another hard-drive 1TB....where i can buy?
It's also much more difficult to install third-party hard drives in current or recent Macs than it was. See:
http://blog.macsales.com/10146-apple-further-restricts-upgrade-options-on-new-im acs
The 2012 iMacs are also in essence glued together and very difficult to disassemble and reassemble. The bottom line is: don't try it.
Why, if I may ask, would you want to remove the 3TB drive and replace it with a 1TB drive? What is it you hope to achieve even if it were possible?
Regards. -
LED Cinema Display (27-Inch) and the new iMac (late 2012)
Does the LED Cinema Display (27-Inch) work with the new iMac (late 2012) as a second monitor, and if so, which cable do I need?
It will work. Plug its Mini DisplayPort plug into the computer's Thunderbolt port. No adapters needed.
-
Can i install bootcamp on the new iMac late 2012 "27"?
can i install bootcamp on the new iMac late 2012 "27" without fushion drive?
You have two possibilities:
1. Buy the USB SuperDrive and install Windows from a disc.
2. Use an USB drive with the Windows 7 installer inside.
Boot Camp isn't compatible with Windows 8, so you will have to wait. Also, the Late 2012 is only compatible with the 64-bit Windows 7 edition -
Cleaner for the new iMac i7 screen?
Anyone have a good cleaner for the new iMacs i swear, the new anti glare brings out the prints!
How to Clean Apple Products
http://support.apple.com/kb/HT3226 -
Persisting crashes with brand new iMac late-2013 27-inch (14,2)
Please help!!!
Last week I purchased the latest iMac late-2013 (14,2) 27 inch with everything top range directly from the Apple Online Store. My configuration in a nutshell is the iMac (of course) with wireless keyboard and magic mouse, attached to it through Thunderbolt a LaCie 5Big (10TB) external drive as well as a USB connected WD MyBook (2TB) for Time Machine and a USB3 connected WD MyPassport (2TB) for those files I want to keep mobile between my devices, all of this on OSX 10.9.1. Futher details on the hardware below:
Model Name: iMac
Model Identifier: iMac14,2
Processor Name: Intel Core i7
Processor Speed: 3.5 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 8 MB
Memory: 32 GB
Boot ROM Version: IM142.0118.B00
SMC Version (system): 2.15f2
My problem is that it keeps crashing... sometimes while doing some Final Cut X or Logic Pro X but other times while simply copying files between hard disks while Time Machine is running and everything else is closed... I can't figure out what the root cause or the particular event that triggers the crashes, thus they are quite unexpected and pretty abrupt - no warning signs at all.
I read in some of the threads that the 3rd party RAM may cause some problems but my 32Gb RAM came directly from Apple as configured while purchasing.
Here is the latest report my system gave me and I know some of you folks are pretty good figuring out what these messages mean. I will most likely get in touch with Apple support but before I do, I wanted to check with you geniuses before I spend hours on the phone with Apple support. Thank you in advance for any help you can provide.
Wed Feb 19 00:22:15 2014
panic(cpu 0 caller 0xffffff800aedc19e): Kernel trap at 0xffffff800afcae78, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000810, CR3: 0x000000008b60c064, CR4: 0x00000000001606e0
RAX: 0x00000000ffffffe9, RBX: 0x0000000000000800, RCX: 0x0000000000000069, RDX: 0x000000000000000b
RSP: 0xffffff83b9933590, RBP: 0xffffff83b99335e0, RSI: 0xffffff83b9933610, RDI: 0xffffff804907c4a8
R8: 0x000000000000000b, R9: 0x000000000000003a, R10: 0x0000000000002000, R11: 0x00000000000016fa
R12: 0xffffff83b259f008, R13: 0x000000000000000b, R14: 0x00000000000010bb, R15: 0xffffff800b4e3e90
RFL: 0x0000000000010206, RIP: 0xffffff800afcae78, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000810, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff83b9933220 : 0xffffff800ae22f69
0xffffff83b99332a0 : 0xffffff800aedc19e
0xffffff83b9933470 : 0xffffff800aef3606
0xffffff83b9933490 : 0xffffff800afcae78
0xffffff83b99335e0 : 0xffffff800b159277
0xffffff83b99336c0 : 0xffffff800b159b50
0xffffff83b9933860 : 0xffffff800b15a6f4
0xffffff83b99338f0 : 0xffffff800b17870d
0xffffff83b9933ac0 : 0xffffff800b1830f7
0xffffff83b9933b00 : 0xffffff800b15712b
0xffffff83b9933bb0 : 0xffffff800b156393
0xffffff83b9933da0 : 0xffffff800afff18c
0xffffff83b9933e50 : 0xffffff800afeceb6
0xffffff83b9933f50 : 0xffffff800b23de23
0xffffff83b9933fb0 : 0xffffff800aef3e06
BSD process name corresponding to current thread: Finder
Mac OS version:
13B42
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide: 0x000000000ac00000
Kernel text base: 0xffffff800ae00000
System model name: iMac14,2 (Mac-27ADBB7B4CEE8E61)
System uptime in nanoseconds: 5956312566589
last loaded kext at 249180514003: com.apple.filesystems.msdosfs 1.9 (addr 0xffffff7f8d3f1000, size 65536)
last unloaded kext at 309589856763: com.apple.filesystems.msdosfs 1.9 (addr 0xffffff7f8d3f1000, size 57344)
loaded kexts:
com.apple.driver.AppleBluetoothMultitouch 80.14
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.2.0f6
com.apple.driver.X86PlatformShim 1.0.0
com.apple.driver.AGPM 100.14.11
com.apple.driver.ApplePlatformEnabler 2.0.9d1
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 2.5.3fc1
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AppleMikeyDriver 2.5.3fc1
com.apple.driver.AppleBacklight 170.3.5
com.apple.driver.AppleIntelHD5000Graphics 8.1.8
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.GeForce 8.1.8
com.apple.driver.AppleThunderboltIP 1.0.10
com.apple.driver.AppleLPC 1.7.0
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleIntelFramebufferAzul 8.1.8
com.apple.iokit.SCSITaskUserClient 3.6.0
com.apple.driver.AppleRAID 4.0.6
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.AppleUSBHub 650.4.4
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.4.0
com.apple.driver.AppleSDXC 1.4.0
com.apple.iokit.AppleBCM5701Ethernet 3.6.9b9
com.apple.driver.AirPort.Brcm4360 800.21.45
com.apple.driver.AppleAHCIPort 2.9.5
com.apple.driver.AppleUSBXHCI 650.4.3
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.0
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleBluetoothHIDKeyboard 170.15
com.apple.driver.AppleHIDKeyboard 170.15
com.apple.driver.IOBluetoothHIDDriver 4.2.0f6
com.apple.driver.AppleMultitouchDriver 245.13
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.driver.DspFuncLib 2.5.3fc1
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.4fc11
com.apple.kext.OSvKernDSPLib 1.14
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IOSurface 91
com.apple.iokit.IOBluetoothFamily 4.2.0f6
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.iokit.IOAcceleratorFamily 98.7.1
com.apple.driver.AppleThunderboltEDMSink 1.2.1
com.apple.nvidia.driver.NVDAGK100Hal 8.1.8
com.apple.nvidia.driver.NVDAResman 8.1.8
com.apple.driver.AppleHDAController 2.5.3fc1
com.apple.iokit.IOHDAFamily 2.5.3fc1
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.5.1d27
com.apple.driver.AppleSMC 3.1.6d1
com.apple.iokit.IOAcceleratorFamily2 98.7.1
com.apple.AppleGraphicsDeviceControl 3.4.12
com.apple.iokit.IONDRVSupport 2.3.6
com.apple.iokit.IOGraphicsFamily 2.3.6
com.apple.iokit.IOUSBHIDDriver 650.4.4
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.0
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.0
com.apple.driver.AppleUSBComposite 650.4.0
com.apple.driver.AppleThunderboltDPOutAdapter 2.5.0
com.apple.driver.AppleThunderboltDPInAdapter 2.5.0
com.apple.driver.AppleThunderboltDPAdapterFamily 2.5.0
com.apple.driver.AppleThunderboltPCIUpAdapter 1.4.0
com.apple.driver.AppleThunderboltPCIDownAdapter 1.4.0
com.apple.iokit.IOUSBUserClient 650.4.4
com.apple.driver.AppleThunderboltNHI 1.9.2
com.apple.iokit.IOThunderboltFamily 2.8.5
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.iokit.IO80211Family 600.34
com.apple.driver.mDNSOffloadUserClient 1.0.1b4
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.6.0
com.apple.iokit.IOUSBFamily 650.4.4
com.apple.driver.AppleEFINVRAM 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.10
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 21
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.8
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1
Model: iMac14,2, BootROM IM142.0118.B00, 4 processors, Intel Core i7, 3.5 GHz, 32 GB, SMC 2.15f2
Graphics: NVIDIA GeForce GTX 780M, NVIDIA GeForce GTX 780M, PCIe, 4096 MB
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3831554738454655352D474E4C2D46
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3831554738454655352D474E4C2D46
Memory Module: BANK 0/DIMM1, 8 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3831554738454655352D474E4C2D46
Memory Module: BANK 1/DIMM1, 8 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3831554738454655352D474E4C2D46
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x111), Broadcom BCM43xx 1.0 (6.30.223.154.45)
Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
PCI Card: pci10b5,8609, Thunderbolt@10,0,1
PCI Card: pci1b21,612, AHCI Controller, Thunderbolt@14,0,0
PCI Card: pci1b21,612, AHCI Controller, Thunderbolt@13,0,0
PCI Card: pci1b21,612, AHCI Controller, Thunderbolt@12,0,0
Serial ATA Device: APPLE SSD SM0512F, 500.28 GB
Serial ATA Device: ST2000DM001-1CH164, 2 TB
Serial ATA Device: ST2000DM001-1CH164, 2 TB
Serial ATA Device: ST2000DM001-1CH164, 2 TB
Serial ATA Device: ST2000DM001-1CH164, 2 TB
Serial ATA Device: ST2000DM001-1CH164, 2 TB
USB Device: My Passport 0748
USB Device: FaceTime HD Camera (Built-in)
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
USB Device: My Book
Thunderbolt Bus: iMac, Apple Inc., 23.10
Thunderbolt Device: 5big SR, LaCie, 3, 26.2Oh. You didn't 'splain that. In this case here's a suggestion for a start:
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.
You may want to do a hardware test to determine if there is a hardware failure:
How to invoke and interpret the Apple hardware tests | MacFixIt - CNET Reviews
Using Apple Hardware Test -
I am thinking of getting my first Macbook pro for uni and was just wondering which one would be the best? The macbook pro or macbook pro with retina display? or even wait for the new release in 2013 ?
If your budget is unlimited, look at both the retina and non-retina and make a decision based on your preferences. If funds are tight, explore the options in the refurbished section. Unless you are dealing with courses that demand specific performance parameters, any one of these options will suffice.
Ciao. -
What third party RAM is as good as the "1600MHz DDR3 SDRAM - 4x8GB" upgrade that Apple offers for the NEW, 27" 2014 5K iMAC Retina?
And is it advisable to buy instead of the Apple upgraded RAM? (my understanding is that third party RAM is not as costly).go with one of the quality sources for ram OWC and Crucial are very well thought of
your options with the 5K when you buy it are
8GB 1600MHz DDR3 SDRAM - 2x4GB
16GB 1600MHz DDR3 SDRAM - 2x8GB [Add $200.00]
32GB 1600MHz DDR3 SDRAM - 4x8GB [Add $600.00]
you might want to go with the 16GB option when you buy if you know you might want to go to 32GB some day as that will get you to 32zb at the lowest cost. or you can start with the 8 and add 8GB sticks as you need them but if you are not happy stopping at 20GB you will end up with a pair of 4GB sticks to try to sell on ebay... or if you are lazy like me you get a couple of extra xmas tree ornaments.. i have 35 years of ram methods on my tree now dating back to the extra ram for my Apple ][ extra 8k and not a few obsolete processor ornaments too... dress em up with glitter so they sparkle
this is the owc page for ram for the 5k iMachttp://eshop.macsales.com/shop/memory/iMac/Retina-5K/DDR3L
8.0GB PC3-12800 1600MHz SO Kit (4GB x 2) w/Lifetime Warranty
Same Day
$99.79
12.0GB PC3-12800 1600MHz SO Kit (4GB + 8GB) w/Lifetime Warranty
Same Day
$147.50
16GB PC3-12800 1600MHz SO Kit (8GB x 2) w/Lifetime Warranty
Same Day
$197.99
32GB PC3-12800 1600MHz SO Kit (8GB x 4) w/Lifetime Warranty
Same Day
$395.00 -
Better to go for the new iMac 24" 2.66GHz or the old iMac 24" 2.8GHz?
The old one's at $1199 in refurb
The new one's at about $1340 after an education discount
I guess the new one for the extra $140 or so will hold its resale value better - but is it a better computer and worth the extra $$$s?
Also I don't think the question's really been answered - are the processors different in the new iMacs - have they been physically updated in any way?
Which is it better to go for? Just want to run Logic Studio 8 on it.
Thanks.Well for your $140 difference you get twice the RAM, twice the hard drive space, and a better/faster graphics chip set.
I don't know if the processors are materially different other than speed and the difference is not significant, so I wouldn't stress to much over the 2.66 vs. 2.8 speed ratings since for most processes it probably won't make a difference, but the 2.66 one will probably seems a bit faster since it has twice the RAM. Also, while super expensive right now, the RAM on the newer ones allow you to upgrade to 8gigs of RAM (once those DDR3 SODIMM RAM prices drop). Are the old models limited to 4MB max?
For only $140 difference, I would go with the new model since the upgrades you get more than cover that. I would only consider the older refurbs if you were picking between two models with a much larger price difference.
Patrick -
Are there any wall mount brackets for the new iMac 27" 5k?
I have a wall mount (Bretford) for my Cinema HD Display that I have been using since 2008. I just purchased the new iMac 27inch 5k computer. It would be great to be able to use this computer with the wall mount. The ones that are available (VESA) from the apple store and say they will work with some older iMacs. My question is are there any available for the iMac I purchased? Thanks.
Hi. The VESA mounts for the iMacs are not "changeable": either you buy an iMac with a pedestal, either you buy one with a VESA mount, but you cannot switch, because the VESA mount is the first thing built in the iMac. You would need to sell your 5K iMac and buy a VESA 5K iMac.
iMac (Late 2012 and later): VESA mount compatibility - Apple Support -
I'm sorry, I know this is probably not the right place to pose a question about sales tax, but I could not find the right category =/
If you think I should re-write this question in another category, I will
So, my situation is: I live in Brazil, and I have a friend who's going to the US in October. She is going to buy the new iMac for me.
I read on Apple's website that Sales Tax may apply. In which cases? If my friend goes to the retail store (instead of ordering it's shipment), does she has to pay this tax? how much is it normally? Does it depend on the State?
(And I only ask this because it's really not clear at apple.com and I don't know how sales tax work in the US...)
so thank you for your help!Your question is really inappropriate to the Apple Discussions. The AD is a user-to-user forum for helping with technical problems and questions for Apple products. Sales taxes is certainly not one of those topics.
However, to answer your question. If your friend purchases a Mac in the Apple store or if you purchase it via the online store taxes will be charged. Sales taxes in the US are typically between 6-8 percent of the purchase cost depending upon the state in which it is purchased. There are a few states that do not levy sales taxes such as Nevada and Montana.
In addition when your friend takes the computer into your country you will likely be charged with import duties and taxes as well. If it's your expectation that this ploy will save you some money I wouldn't count on it. -
Mounting the new imac (late 2012)?
I need to mount the new Imac (prob the 27 inch) on an arm. I found one reference that said there wasn't going to be a vesa mount. Does anyone know if it will be possible to mount this thing? I cannot use the stand.. it has to go on an arm for me.
Help!!I was ready to buy the new iMac 27 inch and found out there isn't a way to remove the stand and use a monitor arm! So I am not buying the new iMac.
Just FYI. -
I have a 27" imac. Can I use it as my display for the new imac pro?
Can I attach my 27" imac to the new imac pro and use it as the display?
This should answer your questions. http://support.apple.com/kb/ht3924#1
-
What is the best sound interface to use for the new Imac 27 inch
I am going to purchase teh new iMac 27 inch and I wanted to know what is the best soundinterface to buy with a price range up to 300 -700 dollars
Check out the M-Audio website, as well as Amazon for better pricing on M-audio interfaces
http://www.m-audio.com/index.php?do=products.family&ID=recording
Maybe you are looking for
-
Need New Video Cards for 4 Displays
Hi, I want to install 4 displays, with one being a 30". Will the Radeon 9200 PCI, and 9600 pro work for this? I saw that 9600pro only boots in "safe mode" but that's the only AGP card I can find that will run the 30". Are there any PCI cards with two
-
I am unable to update software for iTunes, iPhone, iPad, or iPad 2. Installation times out and recommends I check network settings and the connection is active. It is There are no problems with other downloads/installs. iTunes, sync and devices wor
-
Printing out to command window project
hi all, i have a question on this cart program i am making, i wanted to know how to output the results to the command window every time a person clicks on the "current status" of their purchase. I want it to print out like ( 5 boxes purhcased, 4 cds
-
Skype for Sony Playstation 3 ( PS3 ) and for Sony ...
There is a huge amount of Sony Playstation users who would like to have Skype available for their consoles. The client is already available for PSP and PS Vita. There are ton of thread with this request, but none of them has received a clear answer a
-
TabNavigator Tab content refresh
Hi, I have a TabNavigator with let's say two Tabs - TabA and TabB along with its contents. Both tab contents read and change xml on which their both contents depends. If i click TabA, then on TabB in which content i modify xml and then return to TabA