DDTS 100 And Creative 6060 TEST SIGNAL!! Please Help...

Hi to everyone..
Just a simple question..
I got a DDTS 100 Ampliefier And A Pair of Creative 6060 speakers..
When i try the "TEST" mode on the DDTS100 all the speakers play the sound correctly , except
the subwoofer (it don't play the typical deep bass sound that subwoofer plays)
and i've noticed that when the led on the DDTS il lit (on the sub led) , the center speaker and the subwoofer play the test sound at the same time.
The thing that i not understand is why the sub emits the same sound as (for example) the front left
speaker (the "hiss" test sound)
Any hint ?
PS : how can i check if the subwoofer works correctly? i've checked all the connection and they are right...
Thanks to everyone!!

Hi Richie,
Thanq for your response. But unlike what you have mentioned, ("what may be happining is the soundcard is decoding the signal and then the ddts is trying to decode it with disatrous results"), In my setup the signal is not getting decoded two times, once by Soundcard and once by the DDTS-100. As I have mentioned that I am taking out an Optical Signal from the sound card to the DDTS-100, the signal comming out from the sound card to the DDTS is Encoded signal only. So there doesnt arise a chance that the signal is getting decoded twice. Can you think of any other reason why my setup is not working? Please let me know.
regards,
Rahul M

Similar Messages

  • DDTS-100 and S750 Installation / Test Mode Question

    I got a DDTS-100 decoder for Xmas and just bought the gigaworks S750's yesterday to replace my old DTT-3500. I plugged the decoder and sub for S750 into the wall and hooked the two up via the 7.1 cable. I then plugged the front and centre speakers into the sub. I'm not going to set up the side and rear speakers for a couple of days as I'm painting. Anyways, I then powered on the sub (green light comes on) and the decoder (it lights up fine). The decoder is set to 5.1. There are no other inputs hooked into the decoder. Then using the remote I hit test mode, the decoder goes in to test mode but I get nothing out of the speakers. I've cranked the volume way up and still get nothing. Do I have to plug all seven speakers in for test mode to work? Do I have to have an analog or optical input, or should test mode just work by itself. Do I have to plug in the little control centre which comes with the S750's, I didn't bother because I have the decoder.
    Any ideas on why I'm not getting any sound? Any other suggestions of things to try?
    Thx.

    Thx, that resolved the issue, I didn't think I'd need it because I had the decoder which basically does the same thing.
    One question about the upmix. Because I am using the DDTS-100 with the gigaworks S750's, does it make more sense to enable the upmix through the control centre for the speakers or through the DDTS-750. Would it make more sense to use the S750 as there are a couple of different upmix modes there?
    Also, with the volume control for the speakers, should I just set the volume on the Control Centre which came with the speakers to a level such as 75% and then use the DDTS-100 to control the volume levels after that, or should I crank the Control Centre up higher?
    Thx.

  • Help connect X-fi Elite Pro with DDTS-100 and Gigaworks s750

    Hi,
    I purchased a brand new Gigaworks s750 speakers system, DDTS-100 decoder and X-fi Elite Pro. I connected the DDTS-100 and Elite Pro using Optical Fibre output from the audio console of X-fi Elite Pro to the optical digital input of DDTS-100. With the cables supplied with s750, I connected it to the Decoder DDTS-100. The problem is I am not getting any sound from the rear speakers and the front speakers. Only the centre speakers and the side speakers are producing sound. I could hear loud hissing sound and very very low volume of the music from the front speakers and no sound from the rear speakers. I can hear good quality sound from the centre speakers and average quality sound from the side speakers. What could possibly have gone wrong with my setup ? Somebody please help me. Thanx in advance.

    Hi Richie,
    Thanq for your response. But unlike what you have mentioned, ("what may be happining is the soundcard is decoding the signal and then the ddts is trying to decode it with disatrous results"), In my setup the signal is not getting decoded two times, once by Soundcard and once by the DDTS-100. As I have mentioned that I am taking out an Optical Signal from the sound card to the DDTS-100, the signal comming out from the sound card to the DDTS is Encoded signal only. So there doesnt arise a chance that the signal is getting decoded twice. Can you think of any other reason why my setup is not working? Please let me know.
    regards,
    Rahul M

  • PS2, Xbox & GameCube + DDTS - 100 and ..

    I have my consoles connected with DDTS - 100 and looking for new and cheap 5.1 surround sound speaker system. I doubt between Creative Inspire T5400 (100 ? in Croatia) and P5800 (70 ?) or something other in that price range. Please, give me some advices and recomendations... thx
    mazgoon

    Just thought I'd jump in and say:
    1). Turn on Xbox with no disc in the drive.
    2). Go to the 'Settings' menu.
    3). Select the 'Audio' menu.
    4). There should be an option for Mono, Stereo and Dolby Digital <---Select Dolby Digital.
    5). Pop a game in (Halo works best for this ) and enjoy!
    Note that some people I know (including myself) have found that the rear speaker come out a bit quiet compared to the front speakers when playing Xbox, so you may need to adjust your speaker set accordingly.
    Hope this helps, Kaya.

  • Connecting DDTS-100 and Audigy 2 ZS

    Hello!
    I have some problems with DDTS-100. My systen curently is: Creative S750, DDTS-100 and Audigy 2 ZS. I can't understand how this DDTS-100 is working. I try to coneect Audigy2 ZS to DDTS using coaxial connection, but when I done this DDTS sound only in Stereo mode. Is it OK. I can't tur on Dolby and DTS on it. Then I try to connect some radio uzing Anolaog input. When I uze Analog input I can Chose betven Stereo Dolby and DTS, But still I cant Switch on Dolby digital or differnet sound modes. And if I tur On Dolby or NEO6 then I don't hera sound from side speakers . I'm wery upsad. I can't Understand how this DDTS-100 is working...
    Pls give me some advice...
    Regards,
    RaimizA

    Analog output on the soundcard --> DDTS-100 switchbox
    Switchbox --> DDTS-100 main unit
    Switchbox --> Speakers
    Digital out on the soundcard --> Coaxial input on the DDTS-100 main unit
    The digital output on the soundblaster can ONLY SEND OUT EITHER A PCM STEREO SIGNAL OR AN ENCODED DATA STREAM (AC-3). In order to make the DDTS-100 decode the data stream correctly you MUST have the software set to SPDIF passthrough and also have that set in the Audio HQ or the Audio console. Put the switchbox to decoder mode. The only way to light up the lights of the DTS and Dolby Digital is to feed the main unit with an encoded data stream of those sound formats. If you try to play anything and put it through the digital out that is not DTS or DD you are going to get... Stereo.
    In order to get sound from the side speakers you must first set the switch on the back of the DDTS-100 main unit to 6.1/7.1 and set the upmix to 5.1-->7.1 or 6.1-->7.1 (depending on the source) on the main volume controller of the S750.
    Message Edited by rico01 on 08-17-2005 09:38 PM

  • DDTS-100 and Divx/Xvid files

    Does the DDTS-100 have problems with DivX/Xvid files that are encoded with AC3?
    Power DVD will pick up a true DD signal for a DVD, but if i convert to avi (divx) with the ac3 sound, it only uses Pro Logic II/Neo6. There isn't even the option in Power DVD to use spdif when playing an ac3 divx file.
    Who here has the DDTS-100 and can play AC3 divx files fine with TRUE DOLBY DIGITAL?
    Cheers.

    Well this went down like a lead balloon.
    If anyone else finds this, a solution is to convert the divx file to dvd vob files. The DDTS-100 will pick up the true digital signal if they are vob files, converted from divx with AC3 sound.
    I use 'VSO divxtodvd', you can google a link.

  • Attempting to download Premiere CC on a second computer while my primary one is being repaired. Computer had CS6, I removed it. Now Creative Cloud thinks it's already downloaded and it is not. Please help.

    Attempting to download Premiere CC on a second computer while my primary one is being repaired. Computer had CS6, I removed it. Now Creative Cloud thinks it's already downloaded and it is not. Please help. <Removed by Moderator>

    You will need to provide more information if the following does not match your situation.
    CC desktop lists applications as "Up to Date" when not installed
    http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html

  • HT201487 i have a problem with xcode programming app when i lunch to it it asking me to enter my password and when i enter it the program show that it is wrong but am 100% sure it's wright so please help me with this issue thanks

    i have a problem with xcode programming app when i lunch to it it asking me to enter my password and when i enter it the program show that it is wrong but am 100% sure it's wright so please help me with this issue thanks

    That's not very intuitive
    Check your mail server setup (mail>preferences>accounts>) choose your MobileMe account and select Outgoing Mail Server (SMTP) dropdown box, select Edit SMTP server list, verify that each instance of the me server has a password, if there are more than one and you only have one account then delete the one without a password.

  • I am not able to launch FF everytime i tr to open it, it says FF has to submit a crash report, i even tried doing that and the report was submitted too, but stiil FF did not start, and the problem still persists, please help me solve this issue in English

    Question
    I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
    '''(in English)'''

    Hi Danny,
    Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
    but not 180, right?
    I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
    =COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
    or
    =SUM(IIF(Fields!TICKET_STATUS=4,1,0))
    If you still have any problem, please feel free to ask.
    Regards,
    Vicky Liu
    Vicky Liu
    TechNet Community Support

  • Macbook Pro Mid 2009 Processor 2.26 GHz Intel Core 2 Duo, Memory 2 GB 1067 MHz DDR3. iOS 10.10.1 (14B25). My mac is running slow and have ran EtreCheck. Please help me fix my mac. Thanks!

    Macbook Pro Mid 2009 Processor 2.26 GHz Intel Core 2 Duo, Memory 2 GB 1067 MHz DDR3. iOS 10.10.1 (14B25). My mac is running slow and have ran EtreCheck. Please help me fix my mac. Thanks!
    Problem description:
    My mac has been very slow lately. Any suggestions?
    EtreCheck version: 2.1.2 (105)
    Report generated December 14, 2014 at 8:15:29 PM PST
    Hardware Information: ℹ️
      MacBook Pro (13-inch, Mid 2009) (Verified)
      MacBook Pro - model: MacBookPro5,5
      1 2.26 GHz Intel Core 2 Duo CPU: 2-core
      2 GB RAM Upgradeable
      BANK 0/DIMM0
      1 GB DDR3 1067 MHz ok
      BANK 1/DIMM0
      1 GB DDR3 1067 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      NVIDIA GeForce 9400M - VRAM: 256 MB
      Color LCD 1280 x 800
    System Software: ℹ️
      OS X 10.10.1 (14B25) - Uptime: 0:54:52
    Disk Information: ℹ️
      Hitachi HTS545016B9SA02 disk0 : (160.04 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      MacHD (disk0s2) / : 159.05 GB (49.15 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      HL-DT-ST DVDRW  GS23N 
    USB Information: ℹ️
      Apple Inc. Built-in iSight
      Apple Internal Memory Card Reader
      Apple Inc. BRCM2046 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Computer, Inc. IR Receiver
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Startup Items: ℹ️
      DVD3EnablerService: Path: /Library/StartupItems/DVD3EnablerService
      Startup items are obsolete in OS X Yosemite
    Problem System Launch Agents: ℹ️
      [failed] com.apple.AirPlayUIAgent.plist [Details]
      [failed] com.apple.CallHistoryPluginHelper.plist
      [failed] com.apple.coreservices.appleid.authentication.plist [Details]
      [failed] com.apple.icloud.fmfd.plist [Details]
      [failed] com.apple.secd.plist [Details]
      [failed] com.apple.security.cloudkeychainproxy.plist [Details]
      [failed] com.apple.telephonyutilities.callservicesd.plist [Details]
    Problem System Launch Daemons: ℹ️
      [failed] com.apple.ctkd.plist [Details]
      [failed] com.apple.icloud.findmydeviced.plist [Details]
      [failed] com.apple.ifdreader.plist
      [failed] com.apple.nehelper.plist [Details]
      [failed] com.apple.softwareupdate_download_service.plist [Details]
      [failed] com.apple.wdhelper.plist [Details]
      [failed] com.apple.xpc.smd.plist [Details]
    Launch Agents: ℹ️
      [loaded] com.google.keystone.agent.plist [Support]
      [invalid?] com.oracle.java.Java-Updater.plist [Support]
      [not loaded] com.teamviewer.teamviewer.plist [Support]
      [not loaded] com.teamviewer.teamviewer_desktop.plist [Support]
    Launch Daemons: ℹ️
      [running] com.adobe.ARM.[...].plist [Support]
      [loaded] com.adobe.fpsaud.plist [Support]
      [loaded] com.google.keystone.daemon.plist [Support]
      [invalid?] com.oracle.java.Helper-Tool.plist [Support]
      [not loaded] com.teamviewer.teamviewer_service.plist [Support]
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist [Support]
      [invalid?] com.nds.pcshow.plist [Support]
      [invalid?] com.nds.pcshow.uninstall.plist [Support]
    User Login Items: ℹ️
      None
    Internet Plug-ins: ℹ️
      WidevineMediaOptimizer: Version: 6.0.0.12757 - SDK 10.7 [Support]
      FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
      QuickTime Plugin: Version: 7.7.3
      AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Support]
      AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Support]
      Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
      Default Browser: Version: 600 - SDK 10.10
      Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
      iPhotoPhotocast: Version: 7.0
    3rd Party Preference Panes: ℹ️
      Flash Player  [Support]
    Time Machine: ℹ️
      Mobile backups: OFF
      Auto backup: NO - Auto backup turned off
      Volumes being backed up:
      MacHD: Disk size: 159.05 GB Disk used: 109.90 GB
      Destinations:
      KINGSTON [Local]
      Total size: 30.88 GB
      Total number of backups: 0
      Oldest backup: -
      Last backup: -
      Size of backup disk: Too small
      Backup size 30.88 GB < (Disk used 109.90 GB X 3)
    Top Processes by CPU: ℹ️
          6% WindowServer
          0% AppleSpell
          0% SystemUIServer
          0% powerd
          0% Google Chrome
    Top Processes by Memory: ℹ️
      131 MB softwareupdated
      112 MB Google Chrome
      41 MB Finder
      34 MB Google Chrome Helper
      32 MB WindowServer
    Virtual Memory Information: ℹ️
      51 MB Free RAM
      587 MB Active RAM
      551 MB Inactive RAM
      350 MB Wired RAM
      10.96 GB Page-ins
      865 MB Page-outs
    Diagnostics Information: ℹ️
      Dec 14, 2014, 07:37:58 PM Install Adobe Flash Player_2014-12-14-193758_[redacted].crash
      Dec 14, 2014, 07:21:27 PM Self test - passed

    Please describe the problem in as much relevant detail as possible. The "etrecheck" fad hasn't made that step any less necessary. The usual results of posting etrecheck output on this site without a full description of the problem are very poor.
    The many "failed" warnings that etrecheck sometimes spews mean nothing. Those warnings are not a reason to reinstall the OS, or to do anything else at all. They should be ignored.
    The better your description of the problem, the better the chance of a solution.
    For example, if the computer is slow, which specific actions are slow? Is it slow all the time, or only sometimes? What changes did you make, if any, just before it became slow? Have you seen any alerts or error messages? Have you done anything to try to fix it? Most importantly, do you have a current backup of all data? If the answer to the last question is "no," back up now. Ask if you need guidance. Do nothing else until you have a backup.

  • Just downloaded aperture 3.4 update for the app store and now it wont open please help!!

    just downloaded aperture 3.4 update for the app store and now it wont open please help!!

    Just want to echo this complaint.
    I have tried re installing Aperture 3 and I've looked for preferences or something to clear, but nothing helps.  It continues to crash each time I open it no matter what.

  • Updated my I tunes yesterday and now it wont open, please help

    updated my I tunes yesterday and now it wont open, please help

    I thought is was too much of a coincidence that the adapter went out the same day, but sure enough it did. Just replaced it and it works fine. Thanks

  • I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help!

    I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help! I don't want to have to be stuck using my internal speakers!
    Thank you,
    Chris

    Michael,
    Thanks. I haven't mixed down the audio or checked the number of tracks in Prefs. Good points.
    As far as a mixdown goes, I'll definitely give it a try, though I wonder whether or not the tracks will be recognized during mix down recording - given that you can't hear either of those segments in playback. Just have to try.
    Re the preferred number of allowed tracks - I'll go check as soon as I send this off, but I'm not sure that applies in this case, since the two Channels containing the segments that are pinked out are not in additional tracks. I should have mentioned that other audio clips and segments on the same Channels in the SAME tracks ARE heard in playback. As are two additional track in the 2nd Sequence. It's only when the two sequences are joined that the pink tinted segments can't be heard. Within the sequence the same audio cuts playback as they should. Thanks again &
    Best regards,
    David

  • Please help block my ipod touch second generation and forget the code, try putting the code so many times that now says connect to itunes, I connect but will not let me do anything that tells me this should unlock with key and I should do for Please help!

    please helpme i block my ipod touch second generation and forget the code, try putting the code so many times that now says connect to itunes, I connect but will not let me do anything that tells me this  should unlock with key and I should do for Please help!. thanks

    Place the iPOd in recovery mode and then restore. For recovery mode:
    iPhone and iPod touch: Unable to update or restore

  • HT5631 how do I verify my apple id? I can't sign in to it in mail and I can't make a new one because it just will not process I'm trying to set up iCloud between iPad and iPhone and having ALOT of difficulty pleAse help need it done by later on today!!!!!

    how do I verify my apple id? I can't sign in to it in mail and I can't make a new one because it just will not process I'm trying to set up iCloud between iPad and iPhone and having ALOT of difficulty pleAse help need it done by later on today!!!!!

    In order to use your Apple ID to create an iCloud account, the primary email address associated with the ID must first be verified.  To do this, Apple will send a verification email to your account and you must respond to the email by clicking the Verify Now link.  Make sure you are check the spam/junk folder as well as the inbox.  If it isn't there, go to https://appleid.apple.com, click Manage your Apple ID, sign in, click on Name, ID and Email addresses on the left, then to the right click Resend under your Primary Email Address to resend the verification email.

Maybe you are looking for