DDTS-100 + i-Trigue 5600 + CH-DVD 462 center channel issue? Please help...

Hi there,
I'm having some problems with this setup.
My DVD player is set to RAW output.
All cables are connected properly (checked, double checked)
When playing most 5.1 content (Dolby Digital track from DVDs) surround works perfectly except for the center channel. It's completely deaf. If I set the decoder to Stereo output, it works, so I know it's not the speakers. I tried some tests (7.1 THX Optimizer tests present on some SW DVDs) and the center channel works here (but the other ones are sort of messed up), so I assume it's not the decoder either.
I tried the center/sub switching cable that came with my last speaker set, and though it does switch the channels (I can hear mumbling dialogs in the sub channel) the center channel remains deaf.
So I know that the sound actually makes it out of the DVD (RAW is RAW) to DDTS-100 and from DDTS-100 to the speaker set (yep, the signal's here but I can't hear).
I should mention that I used competetive speakers before and had a similiar issue with the subwoofer channel - it made sound only for the LFE DVD channel as those speakers were not doing subwoofer channel computing (AFAIK Creatives do (bad bad bad bad)), but I assume DDTS and i-Trigue 5600 are supposed to be compatible...
I'm completely puzzled. Any suggestions?

shin8,
Are you getting proper output if you use the "TEST" button on the remote control?
Daniel

Similar Messages

I inserted a SD card on a DVD drive for a mistake, please help me

I inserted a SD card on a DVD drive for a mistake, please help me

iTunes Store: Invalid, inactive, or illegible codes

Unable to burn cds. Have run diognostics. i tunes not running in safe mode. invalid lower filters registry value. Failed while scanning for CD/DVD drives, error 2500. Please help.

Unable to burn CDs using i tunes. Have run diognostics.    Summary:-   i tunes not running in safe mode.
                                                                                                                                    Invalid lower filters registry value.
                                                                                                                                    Failed while scanning for CD/DVD drives, error 2500
Please help.

That's why you want to make a backup of the registry. If you didn't make a backup, use MS system restore to go back. The only values you should remove are UpperFilter or LowerFilter - one or both may be in there and can be removed. If neither value exists, then that is probably why you can't burn and Windows is not recognizing your drive as a writable drive.
... an HP employee expressing his own opinion.
Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

CD/DVD reader is not working, please help.

My cd/dvd reader is not working at all, when I put any cd or dvd on it, the led of the reader starts blinkin but then it stops and nothing happens. I'm using a hp pavilion dv7-1025nr, windows vista 64-bit. Maybe there are some drivers that i should download, in that case, can some one help me with link?, Thanks.

When you access this page from the link, ensure that this is your machine by entering your Model # and then trying your Product # (both on the Service Tag on the bottom of your computer). This will confirm your Model#/Product# for future updates.
HP Support & Drivers Page for Your Machine
Sig: Pavilion Model Series# dv9500t (t=Intel)_CTO_Prod# RL653AV_Vista Ultimate (64-bit)_SP1_Intel 2 Duo CPU T7500_2 GB Ram_BIOS F.09_NVIDIA 8600M GS_200GB 7200RPM SATA Dual HD (100GBx2)_HP 300GB HD USB Kit for xb3000_8/2007

Data DVD from iTunes not working - please help

I burned a 4 GB playlist as a data DVD from iTunes 7.
I am trying to put the files on a PC running iTunes 7, and NOTHING is happening. The drive in the PC is DVD-rom and all other DVD's work fine.
What's the deal?

What is "Adding to library"?
Huh?
This is how you get songs into iTunes.
Open iTunes.
Inset the DVD.
Go to File -> Add File (or folder) to iTunes and select the files/folders on the DVD.
The DVD is not going to show up in iTunes because it is not an audio CD. It is a data DVD.
Do not try to Import the DVD because Import is used for audio CDs only.

New samsung external dvd burner taking forever to rip a dvd on macbook pro. Please help.

Hello...the superdrive in my macbook pro died recently so I purchased an inexpensive Samsung SE-208DB/TSBS external dvd burner (with USB). It has been burning so far now about 14 hours and still on 55%encoding. I have 45 GB available on system and no other programs running at the same time. Not sure if it's something with the burner itself or with my mac. help please and thank you.

No, just a single USB, which, after reading some online comments elsewhere makes me wonder if it was a power-type problem with my mac. I think I'll have to return the drive..
thank you for the help...

DVD Studio Pro 4 Question Please Help

Hello, i have one problem with DVD Studio Pro 4 version 4.0.2. Now the first time i go to save it lets me, sometimes when i go to save the secound or third time it will say error unable to save untitled. Can someone please tell me why it is unable to save sometimes,
Thanks in advance.

Hi,
I am having the same problem. G5 quad 4GB of memory and plenty of disk free space. DVD Studio Pro 4.0.3. Compressor is also up-to-date.
I can save the project once, but thereafter if I try to save the project I get the message "The document xxx.dspproj could not be saved."
Any help would be appreciated.
SyB

DVD Playback Issues-Please Help!!

Hello,
I have been reading this forum and I am trying to figure out if this info may help me but I want to give my specific details if that is ok and hopefully someone can help me here.
I am sorry if I am repeating the same questions as others here, but I am so at a loss right now that I need to be specific to even understand myself!
Ok here is my current process. I edit my projects (3 montages, 2 are 4 minutes, 1 is about 30 minutes) in imovie09. I then go to share, media browser, large. It does its thing. I go to I DVD place the videos in the menu and burn to verbatim dvd-r using 8X speed and leaving the rest of the settings default to IDVD 09 default settings. I burnt Two copies of the exact same project, one right after the other. Both DVD’s play fine on various DVD players in my home, including a DVD capable blu-ray player. I delivered to my client, who can play one montage half way and then it freezes up. The other dvd plays all projects except freezes up in the middle of the 30 min montage.
Is there any settings I can change, or any part of the above process I can change working with the programs I have to ensure that these DVD’s playback properly on all DVD players they are put into? The DVD also does not play at all or start up at all on her PC.
If I export the movies to quick time instead of to the “media browser, what is the best possible settings for doing this and is it a better option then the media browser sharing process?
I am not opposed to purchasing Roxio if it will ensure a better outcome, but in this case I am assuming I need to export the project to quicktime, which again poses my same above question.
I know these are very rookie questions…which is sad because I am fully educated on FCP and broadcasting standard formats, but I cant remember anything from that anymore apparently.
Can someone also explain to me the details of encoding or codecs…in English terms..haha and if I may be able to do change any of anything that has to do with this to make the videos better?
Again I apologize for repeating, but I am pretty desperate for help, and if anyone out there can help me or reach out and be my mentour here I would really appreciate it. If you would prefer I take this off the forum discussions I can be emailed at [email protected].
Thank you so much for your time, I really appreciate these forums and everyone that contributes

Please pardon the intrusion…
Hi, Bengt Wärleby!
Congratulations on advancing to Level 4!
At the Water Cooler in the Level 4 Lounge, we are throwing virtual confetti in celebration of your attainment of Level 4-dom. Would you care to join us at the Water Cooler?
On the Discussions Home Page, down at the bottom, you will, hopefully, soon find the Lounge link available to you. It should show up for you within the next 24 hours if all goes as it should.
Hope to see you there soon!

100% CPU usage when importing cd and downloading from store, please help!

I am using itunes 8.2.1.6. The problem is that whenever I import a cd or download any music from the store my cpu runs at 100%. I have a pentium 4 (which manages nicely with any other task, even importing cd's with another programe) with 3gb RAM.
Is anybody else having this problem? Does anybody know how to fix it?

Mr. Bump

CD/DVD ROM I/O error - Please help

Dear all,
I have just fitted in a new TEAC DW-224E on my TECRA S1 since the old one got damaged (it was detected but its mechanics did not work at all after an accedent at a airport). The new one is detected by the OS (Win XP) and the mechanics works but the LED blinks (orange) constantly and no media can be read. When I try to open it in Explorer the OS issues the message "The request could not be performed because of an I/O device error.". Have you got any ideas how I can fix that or whether I should go and buy a new one. It's very frustrating not to have a CD/DVD ROM that works...
Thanks

Dear Pedro,
Thank you for pointing out the MS Windows issue that refers to the same symptoms my laptop has with the new CD ROM drive. I did replace my CD/DVD ROM drive with the same model. However, a close examination of the parts shows a little difference in Drive Rev kode. The original is A02 while he replacing is A01. Otherwise, they are the same model.
Thanks

DVD Audio and Subtitle script Please HELP

Subtitle Audio Scripts Please Help
Posted: Sep 3, 2006 8:04 PM
I need to write a script that does the following:
1st I have the end user choose if they want subtitles on or off and then both the buttons will default for the user to chose a language choice. So I need a script that will play just audio streams and a script that will play audio with the same language subtitle. Also if the user just pushes the language button I need the script it to default to play just that language...
Here is what I have scripted already please tell me where my mistake is:
Button Command
Subtitles
On mov GPRM 0,0
Jump Special Features: English
Off mov GPRM 0,1
Jump Special Features: English
English 1. mov GPRM 0,2
2. Set System stream Au(Audio Stream 1) if (0=0)
3. Set System Stream St(Subtitle Stream 1)(ON) if (0=0)
4. Goto 11 if (GPRM 0=0)
5. Set System stream Au(Audio Stream 1) if (0=1)
6. Set System Stream St(Subtitle Stream 1)(Off) if (0=1)
7. Goto 11 if (GPRM 0=1)
8. Set System stream Au(Audio Stream 1) if (0=2)
9. Set System Stream St(Subtitle Stream 1)(Off) if (0=2)
10. Goto 11 if (GPRM 0=2)
11. Jump JOFDVD:Start
12. Exit
All my language scripts will be similar just with different audio and sub streams.
Help Please-
Ryan-

Hi There
I think your error is in the first line of your script.
You're using GPRM 0 to set your subtitle condition and when you press enter on your english button your first line says
1. mov GPRM0,2
I'm assuming you want to use this first comand to set your languange condition so you should use GPRM 1 (or more) - at this stage all you're doing is removing the subtitle condition set by your earlier script.
Good luck
Cheers
B

NO disk in drive problem if disk cd/dvd rom drive is empty.PLEASE HELP ME part2

Hi All,
To make it easier to see here it is again. Im realllllyyyy desprate, I have my boss breathing down my neck!!!
I'm working on this problem which doesnt seem to be around anymore. I;ve checked the forums but no recent post has been submited ami out of date. Please help me
The problem is that I need to check that hte user has inserted the CD which is needed to run with the application. So i check the labels of all the drives but if a CD rom or any drive is empty I get the "No Disk in Drive. Please insert disk". If i click cancel it works. How do i get it to go away?????????????.
I even disable the system security which is what was suggested in the past but it still doesnt work.
Here is the code
SecurityManager sm = System.getSecurityManager();
// Disable the Security Manager
System.setSecurityManager(null);
FileSystemView fsv = FileSystemView.getFileSystemView();
fil =File.listRoots();
for (i=0;i<fil.length;i++){
if(found==true)
break;
if((fsv.isFloppyDrive(fil))==false){
if(fil[i].canRead() && !fil[i].canWrite()){
list= fil[i].list();
if(list!=null){
for( j=0;j<list.length;j++){
if(list[j].equals("SDBSL_CD")){
str= fil[i]+"SDBSL_CD/";
found=true;
break;
System.setSecurityManager(sm);
Any help would be muchmuch appertiated
Ive noticed that when i do:
SecurityManager sm = System.getSecurityManager();
System.out.println("sm"+sm); it returns null
help!

If it is soooo urgent, then perhaps you could help your own cause by making it easier for the rest of us to read your code... Hint [code] tags are there for a reason.

NO disk in drive problem if disk cd/dvd rom drive is empty.PLEASE HELP ME

Hi All,
I'm working on this problem which doesnt seem to be around anymore. I;ve checked the forums but no recent post has been submited ami out of date. Please help me
The problem is that I need to check that hte user has inserted the CD which is needed to run with the application. So i check the labels of all the drives but if a CD rom or any drive is empty I get the "No Disk in Drive. Please insert disk". If i click cancel it works. How do i get it to go away?????????????.
I even disable the system security which is what was suggested in the past but it still doesnt work.
Here is the code
            SecurityManager sm = System.getSecurityManager();
            // Disable the Security Manager
            System.setSecurityManager(null);
             FileSystemView fsv = FileSystemView.getFileSystemView();
                fil =File.listRoots();
                for (i=0;i<fil.length;i++){
                    if(found==true)
                        break;
                    if((fsv.isFloppyDrive(fil))==false){
if(fil[i].canRead() && !fil[i].canWrite()){
list= fil[i].list();
if(list!=null){
for( j=0;j<list.length;j++){
if(list[j].equals("SDBSL_CD")){
str= fil[i]+"SDBSL_CD/";
found=true;
break;
System.setSecurityManager(sm);
Any help would be muchmuch appertiated

I have adjusted your code a bit. I hope it will work. Just try again.
SecurityManager sm = System.getSecurityManager();
            // Disable the Security Manager
            System.setSecurityManager(null);
             FileSystemView fsv = FileSystemView.getFileSystemView();
                fil =File.listRoots();
                for (i=0;i<fil.length;i++){
                   if(!fil.exists()) continue; //TRY TO CHECK IT HERE
if(found==true)
break;
if((fsv.isFloppyDrive(fil[i]))==false){
if(fil[i].canRead() && !fil[i].canWrite()){
list= fil[i].list();
if(list!=null){
for( j=0;j<list.length;j++){
if(list[j].equals("SDBSL_CD")){
str= fil[i]+"SDBSL_CD/";
found=true;
break;
System.setSecurityManager(sm);

Creative ddts-100 center trouble

i have a creative ddts-100 and all speakers work but the center doesn't want to run."test" speakers is ok but when i run a dvd no voices in the center.i don't know what can i do, have you an idea ?
sorry for my english,i don't speak it very well.......

I was wrong, the minidisc has optical only line in, the line out is not optical. I checked and i didn't see the red light, while when i conencted to a dvd for home use there was red light. I will have to buy the x-fi platinum the 22th and will see if my decoder is defective. Thanks, -Andy

Ddts-100 + audigy2 zs + 550thx mega works. only left/right output

just purchased and installed the above system. however, when doing the software test under speaker settings, i only get front left and front right. all the others dont work. i have miniplug out from audigy (digital output) to (coaxial input) decoder, then decoder out (front left/right, rear left/right, sub/front) to megaworks input (front left/right, rear left/right, sub/front). i do the test on the ddts-100 decoder, and i get all 5.1 channels. now, just to clarify, i used the supplied mini plug to rca, that rca to the rca input (coaxial) the plug is the mono plug that came with the decoder. do i need to go out and buy the 4 pole mini plug? why dont they just supply it instead of the mono plug.. which isnt even shown to be used in my manuals.
anyway, clarification would be good on the mono/4 pole miniplug. otherwise nice sound so far.cant turn it up cuz its midnight and highly doubt the neighbours would appreciate it.
cheers
Steve

Hmmm... My guess is that this is due to your setup with digital out. Since the digital out on your soundcard will not pass through anything other than stereo PCM or encoded SPDIF data you will not get anything else but FL and FR channels when calibrating. Read more about this is the soundblaster forum section here.
My suggestion, as I'm sure everyone else will, is to connect your soundcard using the analogue outputs into the switchbox of the DDTS-100.
Edit: to be more precise this is how you can connect everything: from your soundcard, connect the analogue outputs into the switchbox of the DDTS-100. Connect the switchbox to the main DDTS-00. Connect the DDTS-00 main to the speakers. Now, connect the digital out from your soundcard into the coaxial input on the DDTS-100. When doing a calibration, switch to PC mode on the switchbox and calibrate. If you then want to use the digital out, enable digital out only in the speaker or THX settings. I use this setup at home actually but use the T7700 speakers instead.
Message Edited by rico0 on 07-20-2005 09:50 AM

DDTS-100 + i-Trigue 5600 + CH-DVD 462 center channel issue? Please help...

Similar Messages

Maybe you are looking for