DDTS-100 Need Remote Control
Hi, I somehow lost the remote control hand unit for my DDTS-100. Can I order a new one? The unit is buried deep inside a low-to-the-ground cabinet, and I can't reach the buttons.
Thanks
If you leave the speakers idle, they will consume very little power. The only way to figure out how much would be to use a multimeter or an "amp clamp" to figure out how much current the speakers draw.
If the speakers consumed much power when idle, they'd be making noise when you aren't doing anything to them.
Similar Messages
-
Advice needed, remotely controlling Mac's.
Hi there,
In my household we have several Mac's, all in different parts of the same house, performing different jobs. The Mac mini in the ground floor living room stores our music and pictures. Whilst the MacPro in the loft studio is used for work and only contains work related media.
If I want to play music on the MacPro I simply use iTunes to gain access to the music library on the Mac mini. This only works however if iTunes is running on the remote Mac. So here's my question. How do I remotely control Macs in my house, all of which are on the same network? Remote Desktop seems like overkill for what I need.
Something akin to the remote screen sharing feature in iChat is what I am looking for, that way I can launch iTunes remotely. Any ideas or recommendations? Many thanks in advance.
Regards, Anil K SolankiI've been using Mac's for nearly 20 years now & I'm still amazed by the amount of new things I learn.
Captfred's solution is exactly what I was looking for. So thanks, to him/her and to all the generous and kind folks that have contributed.
I must say this simply because it is true. This forum always has knowledgeable and polite people willing to help fellow Mac users. For those good folks who make this forum an actual joy to visit, my thanks and respect.
Regards, Anil K Solanki -
Hello all ,
I need remote control for my megaworks 550 , my speakers work so well they are like new
but they are not under guaranteed so i want to buy a new remote control , someone knows
where i can buy one and know about price too ?
Thank you for reply meello Vatman,
I have just registered + saw your request 4 the extn cable,I am
looking 4 the same thing. I thought of having the cable cut +
a new cable soldered or joined inbetween but did not really want to
do that until I got another wired remote but they wont supply them (yet?).
I rang Keene Electronics 0870 990 9000 &
they asked for an email [email protected] or a
letter giving as much info as pos preferable with a
photo and measurements. I have not got round to doing that as
yet.Hope this is of some use,let me no if u have got the
cable please(if so how and where) or if u have any joy,
cheers, editman -
DDTS-100 Remote Control Replacement / Codes
I have the DDTS-100 I use it for everything in my home theater, I know maybe it isnt a real amp/reciever, but it does what i need.
The remote however is a piece of crap, small buttons, and very unresponsive even with new batteries. Is there a way to program a different remote, or a known replacement add on remote? All i want the remote to do is mute, volume, and input. It is annoying to be 5 feet away and have to press mute 25 times for it to respond.
Ideally I could combine it with my DVRs remote, one less remote needed.AMRivlin,
Unfortunately, the codes used in most universal remote controls are made specificly to each different remote brand. The code number programmed into the remotes are not something the individual component manufacturers determine.
In your case, my best suggestion would be to pick up one of the "learning" remotes. With that, you enter the programming mode on the remote, aim the two remotes at each other, and the "learning" remote records and stores the IR signal being sent by the original. While this is a bit time consuming, it is the best and only way that I am aware of at this time.
Daniel -
I finally jumped on the band wagon, and got an HD TV. I rarely use my Megaworks 650 system on my PC for its worth, so I'm moving the 650s to the living room to use with the home theater.
Just bought a Samsung 46" 650 series TV, and will be running it from Charter's HD Moxi box.
So, my issue is, when I'm watching TV/Movies, I do not wish to add another remote to the mix to adjust volume. Does anyone know of what the DDTS-100 remote might emmulate, so I can program the MOXI remote to control the volume?
The Moxi Guide is:
http://www.charter.com/Visitors/GETBINARY.xbin?ID=605
Charter is scheduled to swap out our non-HD Moxi to the HD version on Thursday. Their guide has an "Programming by search" feature, but looks to be timely.
Seems like it would be easier to know what the Creative remote might emmulate.
Thanks in advance.Can you view any of my photos?
-
Recently upgraded my TV's in my house with new Sceptre 40" and 50" TV's - thank you WalMart. Purchased in September 2014. (new / current Sceptre TVs).
All of the Verizon printed, online, and other documentation for the P265V3 RC (model RC2655005/01B) for Sceptre shows to use code '335'. I have tried the '335' code on both of the TV's and no worky at all.
Following the 'Quick Setup Guide-Verizon FIOS remote' steps (paper/PDF instructions with RC Manual):
I can successfully enter the '335' code as outlned in step 4... and 'The RED LED will blink twice and then stay on'. occurs. So far, so good.
Step 5 states, "5. Press and release the <CH +> button repeatedly until the TV turns off......." This happens perfectly... I can press the <CH+>> button a few times, and indeed, my TV turns off.
Now, onto Step 6: "Test that the remote control is programmed for your TV"..... can't get Mute, A/V, other keys to activate /. be recognized - even though I'm followijng "press and hold that key. Release it as soon as it works"
Does anyone have a working code for Sceptre TV's ??? The Verizon '335' code doesn't work for me.
I need the 'best code' anyone has found that works with new Sceptre TV's.... the 335 code that VZ recommends... no worky.Robertop,
have you tried the following? The info below is found here
Turn on your TV and the FiOS TV Set-Top Box.
Make sure you can see live TV.
Press and hold the OK and FiOS TV buttons together then release both buttons.
The red LED light blinks 2 times and then stays on.
Press and hold the Play button.
The remote control tries a new TV code every second.
The red LED light blinks each time a new code is sent.
When the TV turns off, release the Play button immediately.
NOTE: Some TVs may respond slower than others. If necessary, you can press the Ch+ and Ch- buttons to go forward or backward one TV code at a time.
Test your remote to ensure it is working properly:
- Turn on the TV by pressing the TV button on your FiOS TV remote.
- Press the Vol+ and Vol- buttons to ensure that you can control the volume.
- Press the Mute and A/V buttons to ensure they work.
If any of these buttons do not work, press and hold that button. Release the button as soon as it works.
If all the buttons work, press OK to this TV remote code.
The red LED light blinks 3 times and then turns off. Your remote control is now programmed. -
Hi.
Trying to give some non-admin users the right to remote control workstations via the user object. I have followed the tids/documentation for
this when using ConsoleOne and that works just fine.
When trying to remote control a user object with desktop4.exe (dopps zenwsbrowser actually) there seems to be some rights missing. Making the
user into an admin solves the problem and until the remote controlled user changes IP on his workstation it keeps on working even when removing
admin rights.
So the question is simply put:
What rights is needed on user AND workstation objects to remote control with desktop4.exe? Or if someone knows how I can check what attributes
has changed on a user after a remote control has been performed that would be sweet too.
/anders westerbergAnders,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
Need to sign Lenovo in order to install our Remote Control app for our Customer - Help please!
Dear All,
Thank you for joining me into the Lenovo Community.
I am not certain if I have started the thread in the right place, if I have not, admins please help me transfer this thread where needed.
One of our Customers is going to purchase our Remote Control application, in order to access and remote control their Android Smartphones, from their Windows PCs (Windows Computers to access and remote control their Android phones). The Customer is using Lenovo as their smartphones (about 2000 of them).
However, our application needs to be signed by Lenovo in order to fully install and run on a Lenovo Android smartphone.
I do not have access to the Support department, nor to the Development department of Lenovo in China.
Is there a way that you would recommend I take, either by contacting Development directly, or Support, and where would that be? China or US?
Thank you in advance and I hope to hear from you soon.
kind regards,
Michael ChatziliasUse the "auto search" feature of the remote to see get the code.
In the manual, it's under "WHAT IF NONE OF THE CODES WORKED"
Here's a summary:
program the TV, use code 922
Press Play
then Press Fast forward.
Keep pressing fast forward until your tv turns off (go slow, if you go to fast you can use rewind to go back a code).
when it turns off, the remote found the code, press OK to save it. -
I need the correct driver for an infrared remote control (ENE CIR receiver) for Pavilion DV4-2173nr.
The receiver that came with my notebook is a black model one (see picture below), with the following information in its bottom label:
RC1762302/00
3139 228 50021
HP SPS: 435743-001
HP: HSTNN-PRO7
RC6 ir
CP06 60808 A 146218 REV. B
I never managed to make it work, from the very beginning. I know it is working, because I replaced the battery for a brand new one and it shows a blinking IR LED when I press any button and point it to a digital camera.
Searching for "ENE CIR receiver driver" is useless 'cause I received more than one hundred answers - I tried four of them but none worked so far.
So, instead of trying the whole bunch, I am crying for help - could someone please tell me which driver is the correct one for this remote model?
Thanks in advance and regards,
Mike
P.S.: I am using Windows 7 Ultimate 64-bit and Ubuntu 12.04 in this notebookhttp://ftp.hp.com/pub/softpaq/sp46501-47000/sp46741.exe
File name:
sp46741.exe [1/1, 1.04M]
System requirements:
No additional prerequisites
Released:
2009-12-31
Version:
2.7.4.0 A
Compatibility:
Microsoft Windows 7 (32-bit), Microsoft Windows 7 (64-bit)
Fix/Enhancement:
Original Software/Drivers -
Need a way to remotely control a camcorder for live streaming
Hi all,
I purchased a Canon Vixia HF R40 for streaming. It works well enough when I use the camera's HDMI out to a Blackmagic Intensity Pro card and stream via Livestream.com.
The problem I'm having is that the camera is permanently mounted about 8' up a wall, and I sometimes need zoom it in or out for different programming. Reading the box, I expected to be able to us WiFi to remotely control the zoom, but turning on WiFi turns off the HDMI output.
Questions:
1) Will the Canon CameraWindow software on my computer allow me to control the zoom the R40 via USB, or is it just for transferring previous recordings?
2) Is there a different camcorder that will allow me to stream the HDMI output and zoom?1. No, as far as I know you cannot control the camera via USB.
2. I believe that the last camcorders in Canon's M series (M400, M40, M41) came with an IR remote which could control the zoom. -
What rights are needed for remote control
I have a user that I want to allow remote control rights for a group of
classroom PC's. What rights do I need to give her and where do I apply
them? I have read TIDS that tell me I have to give rights at each
workstation object which I find hard to believe as its so time consuming!
Thanks in advance
Hazel> On Thu, 27 Jan 2005 19:38:56 GMT, [email protected] wrote:
>
> > I have read TIDS that tell me I have to give rights at each
> > workstation object which I find hard to believe as its so time
consuming!
>
> depends.. if you have not eDir that's the case..
>
> but take a look at tools zenworks remote operators... which will help
you a
> lot in this case...
> --
>
> Marcus Breiden
I have edirectory and imported workstations etc .. running zen 4.1 .. I
just cant seem to figure out how to give this user rights to remote
control only one classroom.
Hazel
>
> Please change -- to - to mail me.
> The content of this mail is my private and personal opinion.
> http://www.edu-magic.net -
Software needed for Pavilion dv2201ca web cam plus remote control function
HP Pavilion dv2201ca - Windows Vista Home Premium 32-bit
Replaced hard drive and reloaded software using System Recovery DVD and downloaded SP-1 and SP-2.
The web cam and the remote control features do not function after installing the above software and using online updating for the installed software.
Can someone please direct me to a link that will provide the proper web and remote software?Didn't find the soft pac for the remote control installation, just instructions for using the TV functions. On a separate forum I found a reference to " sp40139 " to resolve the remote control problem on a different operating system. I downloaded the file (29Mb) but was afraid to install it for my 32 bit Vista Home Premium OS. If I could find the link to the location where this soft pac was located, I could probably find the correct one.
My computer dv2201ca is probably of Canadian origin ..... would there be a different support site for this? -
Need help with my Toshiba remote control and receiver for Qosmio G30 161
Hello to all
I have a Toshiba Qosmio G30-161 and with it I have a Toshiba remote control and a Toshiba remote control receiver, this is the first time I have used it (tried to that is), my problem is the remote is not working on the computer when I press any program buttons the computer does nothing.
I have installed four brand new AA batteries and the remote works fine its sending signals to the receiver, the receiver the detecting the remote as a red light appears every time you press a button and as for the computer I have checked the drivers and the USB is picking up the receiver as a E-home remote receiver which I have checked with Toshiba and that is correct, so all in all the remote is working, the receiver is picking up signals and the pc has detected the receiver but nothing works, I have installed remote control manager but this still has done anything. I have spoken to Toshiba help and support and the end result is they are not sure what the problem is. Can anyone help I require the remote for slideshows for customers as I??m a photographer.
Also to confirm I am running Windows XP MCE addition.
Anthony WorlockHi there,
this remote contol works, if you use it without any special drivers and special software, only in the Media Center.
But if you install such stuff like [WinLirc|winlirc.sourceforge.net] then you should be able to get some functions for your presentation.
Please try this tool and check if it works.
By the way: If I were you I would first read the Manual and FAQ of WinLirc before starting because its a little bit tricky to handle the program. :) (Too many settings :D)
Greets -
Need app for ios remote control car
What app is used for the Remote Control Car BMW X6?
Only if yo have a compatible copy on your computer or in a backup of your computer files.
This
App Store: Install the latest compatible version of an app
Only applies to iOS 4.2.1 and later. -
Satellite A500-19x - Need compatible remote control part number
Does anyone know the part number for the internal remote control that fits in the toshiba A500-19x. Anyhelp gratefully received..
Hi
I dont know the remote control part number which could be compatible with such notebook but I think that an ASP in your country could help you.
You can purchase all compatible parts from the service partner in your country.
If the parts are not available then the guys will order it from the Toshiba head stock.
Cheers
Maybe you are looking for
-
How to put report title and page no to appear in multiple pages,when using cross tab reports
Post Author: shaminranaweera CA Forum: General I am using crystal reports 9.0 with odbc foxpro database conectivity I have designed a cross tab report and it is on the report header part and all the report details are fine,except that the report tit
-
How might I identify the manufacturer of an external hard drive?
This question may not be limited to G3 iMacs running OS 9.2. I got the machine a year ago, and about 6 months ago I added an external USB HD sold under the CompUSA name. I have been having some difficulties lately, and as part of my troubleshooting e
-
How to get certification for MY Adapter.
Hi guys, Now i am working on Adapter Development.Can anyone tell me what are the conditions i should satisfy to get my Adapter certified by SAP. Regards, Gowtham K.
-
this is gonna sound like a dumb question. just wondering what the average cost of fixing a car cd player would be. also if its even possible/worth it to fix it and what it would cost to just replace it. i know i havent given alot of details, just loo
-
If I upgrade mavericks to Yosemite(via app store), I lost my all app?
If I upgrade mavericks to Yosemite(via app store), I lost my all installed app?