DDTS-100 Remote codes?

I finally jumped on the band wagon, and got an HD TV. I rarely use my Megaworks 650 system on my PC for its worth, so I'm moving the 650s to the living room to use with the home theater.
Just bought a Samsung 46" 650 series TV, and will be running it from Charter's HD Moxi box.
So, my issue is, when I'm watching TV/Movies, I do not wish to add another remote to the mix to adjust volume. Does anyone know of what the DDTS-100 remote might emmulate, so I can program the MOXI remote to control the volume?
The Moxi Guide is:
http://www.charter.com/Visitors/GETBINARY.xbin?ID=605
Charter is scheduled to swap out our non-HD Moxi to the HD version on Thursday. Their guide has an "Programming by search" feature, but looks to be timely.
Seems like it would be easier to know what the Creative remote might emmulate.
Thanks in advance.

Can you view any of my photos?

Similar Messages

DDTS-100 Remote Control Replacement / Codes

I have the DDTS-100 I use it for everything in my home theater, I know maybe it isnt a real amp/reciever, but it does what i need.
The remote however is a piece of crap, small buttons, and very unresponsive even with new batteries. Is there a way to program a different remote, or a known replacement add on remote? All i want the remote to do is mute, volume, and input. It is annoying to be 5 feet away and have to press mute 25 times for it to respond.
Ideally I could combine it with my DVRs remote, one less remote needed.

AMRivlin,
Unfortunately, the codes used in most universal remote controls are made specificly to each different remote brand. The code number programmed into the remotes are not something the individual component manufacturers determine.
In your case, my best suggestion would be to pick up one of the "learning" remotes. With that, you enter the programming mode on the remote, aim the two remotes at each other, and the "learning" remote records and stores the IR signal being sent by the original. While this is a bit time consuming, it is the best and only way that I am aware of at this time.
Daniel

DDTS-100 Remote

Hey!
I have a DDTS-00 but no remote, does anyone know where I can purchase one? (I tried to contact creatuve but their form to send a message didn't work since I couldn't select the DDTS-00)?
Thanks for any help!?

Can you view any of my photos?

Ddts-100 + dtt3500

I have owned and used my DTT3500 Digital speakers happily for 3 and a half years now. But I have recently bought the DDTS-00 decoder so I could also enjoy DTS encoded material (which the DTT3500 does not support). I've succesfully connected the DTT3500 speakers to the DDTS-100 and made all of them work, but have currently 2 problems:
1) The output volume level is EXCESSIVELY low, either with Dynamic Mode on or off. I've read somewhere here in the forums that is because the DTT3500 decoder is also an amplifier and the DDTS is only a decoder. Well, if that's the case, could I just buy any amplifier and use it connected between the decoder and the speakers?
2) This problem has me puzzled. The DTT3500 speaker cables are RCA mono, but the DDTS-100 has only stereo mini-plug inputs. So, since my father owns an electric supply shop, I simply got 3 2RCA-stereo miniplug converters. I connected the 2 front speakers to one and connected the miniplug to the front input of the DDTS and did the same with the 2 rear speakers, and the center-subwoofer. I get output for all of them EXCEPT the subwoofer when I hit the test button on the DDTS-100 remote control. Mind you that the center speaker DOES work. How can I solve this?
Thank you so much in advance!

This is simply because the DDTS-100, is a standalone decoder, not an amplifier.
You could try messing around with an amplifier, and see if you can make your own setup with an amplifier and the decoder.
Good Luck

DDTS-100 Need Remote Control

Hi, I somehow lost the remote control hand unit for my DDTS-100. Can I order a new one? The unit is buried deep inside a low-to-the-ground cabinet, and I can't reach the buttons.
Thanks

If you leave the speakers idle, they will consume very little power. The only way to figure out how much would be to use a multimeter or an "amp clamp" to figure out how much current the speakers draw.
If the speakers consumed much power when idle, they'd be making noise when you aren't doing anything to them.

Connecting creative inspire 6600 to the ddts-100 decoder

ok so i was sedused by the idea of getting a ddts-100 to my inspire 6600 speakers,but the fact is i need to know some information:
the first thing is:will i be able to connect my speakers to the decoder and then to the soundcard?
my speakers have only RCA jacks for the satellites to connect them to the amp,and the amp have 3 assebled wires,3.5mm ones...my soundcard have also 3 connectors for the speakers,no digital output or optical,..only 3 connectors for the 3.5mm...so will i be able to connect it and then will it be able to reproduce sound like it was doing before?
2-the decoder says it can decode dolby digital ex,dts es,i don't know if i am saying this right but,sometimes we say decoding in 24bits/96khz .....its the dvd quality right? then will the decoder DECODE the dvd source in 24bits/96khz or is it the job of the soundcard?
3-will the decoder improve the listening experience in quality or surround?in case of dvd playing i know it would,but in case of listening to music?

shin8,
Are you getting proper output if you use the "TEST" button on the remote control?
Daniel

DDTS-100 + i-Trigue 5600 + CH-DVD 462 center channel issue? Please help...

Hi there,
I'm having some problems with this setup.
My DVD player is set to RAW output.
All cables are connected properly (checked, double checked)
When playing most 5.1 content (Dolby Digital track from DVDs) surround works perfectly except for the center channel. It's completely deaf. If I set the decoder to Stereo output, it works, so I know it's not the speakers. I tried some tests (7.1 THX Optimizer tests present on some SW DVDs) and the center channel works here (but the other ones are sort of messed up), so I assume it's not the decoder either.
I tried the center/sub switching cable that came with my last speaker set, and though it does switch the channels (I can hear mumbling dialogs in the sub channel) the center channel remains deaf.
So I know that the sound actually makes it out of the DVD (RAW is RAW) to DDTS-100 and from DDTS-100 to the speaker set (yep, the signal's here but I can't hear).
I should mention that I used competetive speakers before and had a similiar issue with the subwoofer channel - it made sound only for the LFE DVD channel as those speakers were not doing subwoofer channel computing (AFAIK Creatives do (bad bad bad bad)), but I assume DDTS and i-Trigue 5600 are supposed to be compatible...
I'm completely puzzled. Any suggestions?

shin8,
Are you getting proper output if you use the "TEST" button on the remote control?
Daniel

DDTS-100 Switcher Alternative?

Hello, I recently purchased a Creative DDTS-100 Decoder, and could not be happier with it. Unfortunately it was a refurbished model missing the switcher box (PC/Decoder to Speakers) and Remote Control. The remote is inconsequnetial as the decoder is not more than a few feet from me, however, the switcher box is considerably more important. Due to my X-fi being unable to output 5.1 (to my knowledge) on any socket other than the 3x3.5mm stereo on the back of my PC, I have to change the plugs every time I want to use full 5.1 on my PC or decoder. I am aware that the X-fi card is unable to output full 5.1 over the SP/DIF out, Optical out or flexijack in Vista due to hardware issues.
My question is, is there any way to hook up the DDTS-100 and my X-fi to my 5.1 headphones (also using 3x3.5mm) with adapters, or is there another product which will allow the same functionality as the DDTS switcher?
Thanks for any help.

You might want to consider a low cost home theater receiver and connect the satellite speakers directly to the receiver. You'll probably have to make your own cable to use the line level output from the receiver's subwoofer channel to the Megaworks subwoofer. Just be careful not to overdrive those little speakers with the receiver. As an added benefit, you'll probably get much better sound quality as well.

DDTS-100 no subwoofer music

Hello!
I bought a DDTS-100 decoder and a Genius KYE SW-5. Home Theater speakers. I have a problem that I don't get any music from subwoofer. I hear it on test (button on remote) but not when music play. I used all types of input (coax, optical, analog) result was the same. I also tried to put in headphones and I heard only left channel only with test I heard the noise in right channel also. I noticed, that the connector that came with the decoder has more levels than the connector on speaker cable. Can that be a problem?
Thank you all for help,
Tadej.

Tadej:
I have similar problem with my DDTS 100 and Genius Home theatre 5.1 speakerset. For connection to speakers I "repaired" Creative cables. I cuted JACK connectors and soldered CINCH connectors. Be sure with good connection, you must find ground with ohm-meter before! Now it plays OK, but allways with no sound from sub!!! Somewhere in this forum is discussed abouthttp://cz.europe.creative.com/suppor...asp?thre=43355)
I resolved it temporarily with parallel connection front center and sub inputs on Genius amlifier. I know it is not ideal, but it gives almost satisfactory bass result.
If anybody can advise me how to get bass directly from DDTS 100, I am thanking in advance.
As a sound source I am using DVD Cyberhome 462 via coaxial connection in Raw mode.

DDTS-100 and S750 Installation / Test Mode Question

I got a DDTS-100 decoder for Xmas and just bought the gigaworks S750's yesterday to replace my old DTT-3500. I plugged the decoder and sub for S750 into the wall and hooked the two up via the 7.1 cable. I then plugged the front and centre speakers into the sub. I'm not going to set up the side and rear speakers for a couple of days as I'm painting. Anyways, I then powered on the sub (green light comes on) and the decoder (it lights up fine). The decoder is set to 5.1. There are no other inputs hooked into the decoder. Then using the remote I hit test mode, the decoder goes in to test mode but I get nothing out of the speakers. I've cranked the volume way up and still get nothing. Do I have to plug all seven speakers in for test mode to work? Do I have to have an analog or optical input, or should test mode just work by itself. Do I have to plug in the little control centre which comes with the S750's, I didn't bother because I have the decoder.
Any ideas on why I'm not getting any sound? Any other suggestions of things to try?
Thx.

Thx, that resolved the issue, I didn't think I'd need it because I had the decoder which basically does the same thing.
One question about the upmix. Because I am using the DDTS-100 with the gigaworks S750's, does it make more sense to enable the upmix through the control centre for the speakers or through the DDTS-750. Would it make more sense to use the S750 as there are a couple of different upmix modes there?
Also, with the volume control for the speakers, should I just set the volume on the Control Centre which came with the speakers to a level such as 75% and then use the DDTS-100 to control the volume levels after that, or should I crank the Control Centre up higher?
Thx.

DDTS-100 digital decoder

I plan to buy and use the DDTS - 100 digital decoder with a
Klipsch 5.1 speaker system in the living room as a home theater for the time being.
Just wondering, is their a built in equalizer of any kind in the DDTS - 100 that
you can access with the remote or from the main device?
I have read all about the decoder, but so far unable to find anything indicating
that it has a mixer or eq to adjust the sound with.

Hi mate Ebuyer sell them ?99.97 thats with VAT included

Creative DDTS-100 Decoder - Stereo - Surround

Hello,
I ordered the DDTS-100 and stands with the Ddts-100 now before a problem.
I wanted to connect the dvd-player and tv with the DDTS-100 and enjoy then surround sound, but I heared that this the DDTS-100 not really can do, tune that?
If I cannot let stereo sound on 5.1 sound, for what is the decoder then good?
Thanks for your answers.

i have the exact same problem
i bought it so that i could use the dolby prologic II from my playstation, everything works except for the sub-signal
if i use the test function on the remote control, the sub does work though
i tried optical in (all 3 of'm), analog in (all 3), different cables, different games, different speakers
i tried it with the optical out from nvidia soundstorm, but no sub-signal either
and when i use the nvidia test function, the sub makes a noise again
i bought this because most reviews where rather positive about this product, and now it's kinda useless, racing / gaming / watching a movie without bass is ridiculous
please give us some help
Message Edited by jakkerd on 04-02-2005 09:43 AM
Message Edited by jakkerd on 04-02-2005 09:44 AM

Dynamic Mode on the DDTS-100

I have a set of Gigaworks S700 plugged into my DDTS-00 hooked up to my DVD player via Coax and man does it sound great. My question is about Dynamic Mode, it is very vague to what it does and it also lists something optional for it etc...what is optional for dynamic mode? How does it work...how do you know if its on or off? Any info on this will help. Not very much info on the site or in the manual. And if I send a email to support it usually doesnt get anwsered...or they dont know what it is either.

Dynamic is the default. Notice this: When you press the Dynamic mode button on the remote, all of the LED's on the decoder's volume button will flash, press it again and only 4 of the volume buttons LED's will flash - this is how you tell the difference. All LED's = uncompressed/loud and 4 LED's = compressed/quiet (default). Apart from that, I should also mention that your own ears should tell you the difference (uncompressed, the default mode, is less loud). Well, I say less loud, but what in fact it does is minimise or ballance the difference between Dolby Digital or DTS's encoded loud and quiet sounds. Ballancing them so say at night for example, when peeps are sleeping nearby, you will hear the 'quiets' and the 'louds' without the major jumps between the two.
I would like to add, the difference that dynamic mode does is very much less than my old Inspire 5500 decoder/speaker set-up. When I pressed it on that system, the sound cut-out for one second and then came back in in the uncompressed state. The difference was MASSIVE. It's still fairly noticeable on DDTS-100 though.
Unless it's late and you don't want to wake other people, I suggest you get into the habit of pressing this each time you turn the decoder on. This way you will get the full whack of Dolby Digital/DTS's encoding - with the big booms and subtle background sounds heard as they were intended to be heard. Also check your DVD player's settings for a similar mode, I found that on mine the default was compressed, like the DDTS-100 is, after a year of owning this player, I suddenly found this setting, changed it.... and bejeezus it is better. :smileytongue:
Regards

Ddts-100 dynamic mode

what is dynamic mode in ddts 100 ?

Dynamic is the default. Notice this: When you press the Dynamic mode button on the remote, all of the LED's on the decoder's volume button will flash, press it again and only 4 of the volume buttons LED's will flash - this is how you tell the difference. All LED's = uncompressed/loud and 4 LED's = compressed/quiet (default). Apart from that, I should also mention that your own ears should tell you the difference (uncompressed, the default mode, is less loud). Well, I say less loud, but what in fact it does is minimise or ballance the difference between Dolby Digital or DTS's encoded loud and quiet sounds. Ballancing them so say at night for example, when peeps are sleeping nearby, you will hear the 'quiets' and the 'louds' without the major jumps between the two.
I would like to add, the difference that dynamic mode does is very much less than my old Inspire 5500 decoder/speaker set-up. When I pressed it on that system, the sound cut-out for one second and then came back in in the uncompressed state. The difference was MASSIVE. It's still fairly noticeable on DDTS-100 though.
Unless it's late and you don't want to wake other people, I suggest you get into the habit of pressing this each time you turn the decoder on. This way you will get the full whack of Dolby Digital/DTS's encoding - with the big booms and subtle background sounds heard as they were intended to be heard. Also check your DVD player's settings for a similar mode, I found that on mine the default was compressed, like the DDTS-100 is, after a year of owning this player, I suddenly found this setting, changed it.... and bejeezus it is better. :smileytongue:
Regards

Creative Decoder DDTS 100,

Hello,
I.m using a creative decoder DDTS 100. When i switch on the decoder i set the volume, in which mode it should be, the volume of center and rear speakers. My problem over here when i switch off and switch on the decoder it comes to the default setting. What i want is my settings needed to be saved each time time i switch off and should come up with the same setting when i power on. Please provide me with a solution for this.
Thank you.

hi,
i found your question doin researching on what a creative ddts-100 is on google as i am clearing out my uncles house who died and he had one. would you be interested in buying this one if you have not already got one?
i dont know much about them and not sure if all componenets are there,the box it was in had a piture on the front of the actual decoder and remote, i have both those and a power lead, box and instructions, it mentions here and there in the intructions about a switch box, which i do no have but can look again for it.
if you are intertested i can list the item on ebay with a price that we can arrange for you to buy and i will post it off to you. where are you?
sorry know this is a long shot but my uncle was a bit of a gadget man there is alot of stuff to clear and i know nothing about any of it!!!
my email address is [email protected], if you are interested please get in touch.
thanks
katherine x

DDTS-100 Remote codes?

Similar Messages

Maybe you are looking for