DDTS-100 Remote Control Replacement / Codes

I have the DDTS-100 I use it for everything in my home theater, I know maybe it isnt a real amp/reciever, but it does what i need.
The remote however is a piece of crap, small buttons, and very unresponsive even with new batteries. Is there a way to program a different remote, or a known replacement add on remote? All i want the remote to do is mute, volume, and input. It is annoying to be 5 feet away and have to press mute 25 times for it to respond.
Ideally I could combine it with my DVRs remote, one less remote needed.

AMRivlin,
Unfortunately, the codes used in most universal remote controls are made specificly to each different remote brand. The code number programmed into the remotes are not something the individual component manufacturers determine.
In your case, my best suggestion would be to pick up one of the "learning" remotes. With that, you enter the programming mode on the remote, aim the two remotes at each other, and the "learning" remote records and stores the IR signal being sent by the original. While this is a bit time consuming, it is the best and only way that I am aware of at this time.
Daniel

Similar Messages

DDTS-100 Remote codes?

I finally jumped on the band wagon, and got an HD TV. I rarely use my Megaworks 650 system on my PC for its worth, so I'm moving the 650s to the living room to use with the home theater.
Just bought a Samsung 46" 650 series TV, and will be running it from Charter's HD Moxi box.
So, my issue is, when I'm watching TV/Movies, I do not wish to add another remote to the mix to adjust volume. Does anyone know of what the DDTS-100 remote might emmulate, so I can program the MOXI remote to control the volume?
The Moxi Guide is:
http://www.charter.com/Visitors/GETBINARY.xbin?ID=605
Charter is scheduled to swap out our non-HD Moxi to the HD version on Thursday. Their guide has an "Programming by search" feature, but looks to be timely.
Seems like it would be easier to know what the Creative remote might emmulate.
Thanks in advance.

Can you view any of my photos?

DDTS-100 Remote

Hey!
I have a DDTS-00 but no remote, does anyone know where I can purchase one? (I tried to contact creatuve but their form to send a message didn't work since I couldn't select the DDTS-00)?
Thanks for any help!?

Can you view any of my photos?

Ddts-100 + dtt3500

I have owned and used my DTT3500 Digital speakers happily for 3 and a half years now. But I have recently bought the DDTS-00 decoder so I could also enjoy DTS encoded material (which the DTT3500 does not support). I've succesfully connected the DTT3500 speakers to the DDTS-100 and made all of them work, but have currently 2 problems:
1) The output volume level is EXCESSIVELY low, either with Dynamic Mode on or off. I've read somewhere here in the forums that is because the DTT3500 decoder is also an amplifier and the DDTS is only a decoder. Well, if that's the case, could I just buy any amplifier and use it connected between the decoder and the speakers?
2) This problem has me puzzled. The DTT3500 speaker cables are RCA mono, but the DDTS-100 has only stereo mini-plug inputs. So, since my father owns an electric supply shop, I simply got 3 2RCA-stereo miniplug converters. I connected the 2 front speakers to one and connected the miniplug to the front input of the DDTS and did the same with the 2 rear speakers, and the center-subwoofer. I get output for all of them EXCEPT the subwoofer when I hit the test button on the DDTS-100 remote control. Mind you that the center speaker DOES work. How can I solve this?
Thank you so much in advance!

This is simply because the DDTS-100, is a standalone decoder, not an amplifier.
You could try messing around with an amplifier, and see if you can make your own setup with an amplifier and the decoder.
Good Luck

DDTS-100 and S750 Installation / Test Mode Question

I got a DDTS-100 decoder for Xmas and just bought the gigaworks S750's yesterday to replace my old DTT-3500. I plugged the decoder and sub for S750 into the wall and hooked the two up via the 7.1 cable. I then plugged the front and centre speakers into the sub. I'm not going to set up the side and rear speakers for a couple of days as I'm painting. Anyways, I then powered on the sub (green light comes on) and the decoder (it lights up fine). The decoder is set to 5.1. There are no other inputs hooked into the decoder. Then using the remote I hit test mode, the decoder goes in to test mode but I get nothing out of the speakers. I've cranked the volume way up and still get nothing. Do I have to plug all seven speakers in for test mode to work? Do I have to have an analog or optical input, or should test mode just work by itself. Do I have to plug in the little control centre which comes with the S750's, I didn't bother because I have the decoder.
Any ideas on why I'm not getting any sound? Any other suggestions of things to try?
Thx.

Thx, that resolved the issue, I didn't think I'd need it because I had the decoder which basically does the same thing.
One question about the upmix. Because I am using the DDTS-100 with the gigaworks S750's, does it make more sense to enable the upmix through the control centre for the speakers or through the DDTS-750. Would it make more sense to use the S750 as there are a couple of different upmix modes there?
Also, with the volume control for the speakers, should I just set the volume on the Control Centre which came with the speakers to a level such as 75% and then use the DDTS-100 to control the volume levels after that, or should I crank the Control Centre up higher?
Thx.

DDTS-100 Need Remote Control

Hi, I somehow lost the remote control hand unit for my DDTS-100. Can I order a new one? The unit is buried deep inside a low-to-the-ground cabinet, and I can't reach the buttons.
Thanks

If you leave the speakers idle, they will consume very little power. The only way to figure out how much would be to use a multimeter or an "amp clamp" to figure out how much current the speakers draw.
If the speakers consumed much power when idle, they'd be making noise when you aren't doing anything to them.

Creative decoder DDTS - 100 replacements? or new model?

Well I wanted to buy ddts-100 but i guess i was too late and it got discontinued . I was about to get it on E bay but it went for too much. Can you guys recomend something as good or better to get then ddts-100 decoder? is its replacement coming soon? I have creative inspire T7900 speakers just in case thanx.

hi,
i found your question doin researching on what a creative ddts-100 is on google as i am clearing out my uncles house who died and he had one. would you be interested in buying this one if you have not already got one?
i dont know much about them and not sure if all componenets are there,the box it was in had a piture on the front of the actual decoder and remote, i have both those and a power lead, box and instructions, it mentions here and there in the intructions about a switch box, which i do no have but can look again for it.
if you are intertested i can list the item on ebay with a price that we can arrange for you to buy and i will post it off to you. where are you?
sorry know this is a long shot but my uncle was a bit of a gadget man there is alot of stuff to clear and i know nothing about any of it!!!
my email address is [email protected], if you are interested please get in touch.
thanks
katherine x

Can I replace the Inspire 5500 decoder with a DDTS-100

Hi,
All I want to do is replace the decoder that comes with the Inspire 5.1 Digital 5500 set with a DDTS-100, and continue to use the same speakers. Is this possible?
The only thing I can see preventing this is that at the moment the the sub and the decoder have to be connected via a din socket (for control and power), but there is no din input on the DDTS-100. Will this be a problem?
Thanks in advance.

Google is a wonderful tool... Tried it's
http://www.hardwareluxx.de/akaspar/r...s00/back_s.jpg
Message Edited by rico01 on 08-17-2005 05:09 PM

Need Sceptre TV Remote Control code(s) that work with VZ P265v3RC -- the '335' code does NOT

Recently upgraded my TV's in my house with new Sceptre 40" and 50" TV's - thank you WalMart. Purchased in September 2014. (new / current Sceptre TVs).
All of the Verizon printed, online, and other documentation for the P265V3 RC (model RC2655005/01B) for Sceptre shows to use code '335'. I have tried the '335' code on both of the TV's and no worky at all.
Following the 'Quick Setup Guide-Verizon FIOS remote' steps (paper/PDF instructions with RC Manual):
I can successfully enter the '335' code as outlned in step 4... and 'The RED LED will blink twice and then stay on'. occurs. So far, so good.
Step 5 states, "5. Press and release the <CH +> button repeatedly until the TV turns off......." This happens perfectly... I can press the <CH+>> button a few times, and indeed, my TV turns off.
Now, onto Step 6: "Test that the remote control is programmed for your TV"..... can't get Mute, A/V, other keys to activate /. be recognized - even though I'm followijng "press and hold that key. Release it as soon as it works"
Does anyone have a working code for Sceptre TV's ??? The Verizon '335' code doesn't work for me.
I need the 'best code' anyone has found that works with new Sceptre TV's.... the 335 code that VZ recommends... no worky.

Robertop,
have you tried the following? The info below is found here
Turn on your TV and the FiOS TV Set-Top Box.
Make sure you can see live TV.
Press and hold the OK and FiOS TV buttons together then release both buttons.
The red LED light blinks 2 times and then stays on.
Press and hold the Play button.
The remote control tries a new TV code every second.
The red LED light blinks each time a new code is sent.
When the TV turns off, release the Play button immediately.
NOTE: Some TVs may respond slower than others. If necessary, you can press the Ch+ and Ch- buttons to go forward or backward one TV code at a time.
Test your remote to ensure it is working properly:
- Turn on the TV by pressing the TV button on your FiOS TV remote.
- Press the Vol+ and Vol- buttons to ensure that you can control the volume.
- Press the Mute and A/V buttons to ensure they work.
If any of these buttons do not work, press and hold that button. Release the button as soon as it works.
If all the buttons work, press OK to this TV remote code.
The red LED light blinks 3 times and then turns off. Your remote control is now programmed.

What can I get to replace a DDTS-100 Decoder?

My DDTS 100 died a couple nights ago and I can not figure out what to do to replace the thing. Nobody is selling them any more and it is a very crucial part my entertainment system.
I have a Creative 7.1 speaker setup that I use with my PC and a Xbox 360 via optical (video is through the VGA cable to a shared monitor). I tried routing the 360 through my audio cards input, but I get garbled noise during anything but steady video (downloaded video trailer was tested). What I need is something compatible with the Creative speakers and won't take up a lot of room. A traditional reciever obviously isn't the answer for me and I really don't want to buy a whole new system because this one piece broke. I'd also be perfectly happy with a new DDTS box. Even Ebay doesn't have any results.
I have spent some time searching around and trying to figure out how to get the 360 working through my audio card. Could I be missing some phantom setting somewhere there?
Any help would be appreciated.
EDIT: I found out that my card only supports stereo input through optical so that explains the noise. Are there any cards that can do 5.1 I only ask because searching for that feature has proven to be very difficult.
Message Edited by mifromn on 06-04-2008 10:09 AM

You might want to look at the Sound Blaster cards that have the breakout boxes for an optical S/PDIF input.
mifromn wrote:
EDIT: I found out that my card only supports stereo input through optical so that explains the noise. Are there any cards that can do 5.1 I only ask because searching for that feature has proven to be very difficult.
Message Edited by mifromn on 06-04-2008 0:09 AM

Finding TV, DVD, etc. Codes for FiOS TV Remote Controls

Every so often someone posts a question about needing the code for their new TV, DVD player, etc, to program into their FiOS TV remote control. The remotes come with a small booklet that lists a number of codes, but I don't think it has been updated in a while, so codes for newer devices or brands may be missing. Verizon has some lists on the web, but they seem to be difficult to find (at least for me). Here are links to the web pages I have been able to find so far:
TVs: Link
DVDs: Link
Audio Receivers: Link
Audio Amplifiers: Link
If any of you have links to other Verizon web pages, or pages at other sites that provide code lists, I think it might be useful to folks to have them posted in one place.
Some things I wish Verizon would do:
1) Provide links in obvious places to the pages that already exist and are linked above (plus any other pages that might exist).
2) Update the pages on a regular basis. Or if they already do that, then put an update date on the page so we can tell when it was done.
3) Provide a link where people could send Verizon information on new devices they get or codes they discover. I mean a real email address or web page where the information would go directly to the right people instead of a generic email address with a canned response where we never know whether it actually went to someone or just was sent to the bit-bucket.
Any thoughts?
Justin
Verizon FiOS TV, Internet, and phone
QIP6416, IMG 1.6.2, Build 08.58
Keller, TX 76248

Hi Adam,
I've got the same problem you had earlier this year, with the same Matsui tv/dvd combo unit and the Black remote. Did you ever get a successful resolution? If so would you mind sharing the solution with me, thank you?

Digitrex ctf3271 codes for remote control

Hi I want to get my remote to control tv but I cant find my tv manual. Does anyone have the codes for this type of tv?

The updated code list is at the following URL: http://www22.verizon.com/ResidentialHelp/FiOSTV/Remote+Controls/SetUp/QuestionsOne/122830.htm
0027 works for my 26 inch Westinghouse, Here's the line of codes from the above website.
Westinghouse 0027, 0478, 0912, 0916

Verizon Codes for remote control for LCD TV

I just got a Westinghouse 26 in lcd tv and need the codes for my verizon remote. I check online but neither worked. They are 0912 and 0916. Can anyone help me ?

The updated code list is at the following URL: http://www22.verizon.com/ResidentialHelp/FiOSTV/Remote+Controls/SetUp/QuestionsOne/122830.htm
0027 works for my 26 inch Westinghouse, Here's the line of codes from the above website.
Westinghouse 0027, 0478, 0912, 0916

What is STB Remote Control code for the Magnavox 15MF400T/37 set?

Does anyone know or know where to find the correct remote control code for the 15MF400T/37 set?

If none of the codes worked, your only other option is to do a scan.
WHAT IF NONE OF THE CODES WORKED?
If none of the codes worked, try the following procedure. (As before, we will use the example of a TV. For other devices use the appropriate Device Key instead of the
TV
key in step 2 and 3.)
1. Turn on your TV.
2. Press and hold the TV key.
3. While holding down the TV key, press OK
4. Release both keys. The Device Keys will blink twice.
5. Press 9 - 2 - 2
6. Point the remote at the TV.
7. Press the play button
8. Press FF button . Every time you press the FF button the remote sends out a new power-off command to the TV. Keep pressing FF until the TV turns off.
9. When the TV turns off, you have found the right code. Press OK to store this code.
Note: There are over 300 TV and DVD codes. The most common codes are tried first, but you may still need to press FF over 300 times to find the right code. If you reach the end of the list of codes the entire remote will flash twice and return to normal operation. You can exit programming at any time by pressing EXIT
If you do this and it still doesnt work, then your tv and the verizon remote dont have a common code and it will not work with your tv.
====================================================================================
Error exists between keyboard and chair.

What is the code for a proscan tv-dvd for a sony rmt-d197a remote control

trying to program a sony dvd remote to turn on and off my proscan tv-dvd combo. the dvd no longer works. is that possible and what is the code for e proscan tv dvd combo?

Unfortunately, the RMT-D197A remote control is not programmable. It only works with the DVD player it comes with.
If my post answers your question, please mark it as "Accept as Solution"
http://bit.ly/Win-4K

DDTS-100 Remote Control Replacement / Codes

Similar Messages

Maybe you are looking for