De activate and reactivate Iphone4
Earased my iPhone 4 to give to my daughter and let her put in all her ifo and at the end it states that the phone can not set up a new Apple ID or cloud acct at the end of the programming? Why is that , and what can I do to fix it? She will keeping the same number.
Thank you
Stephney71 wrote:
Earased my iPhone 4 to give to my daughter ...
See the Checklist here...
What to do before selling or giving away your iPhone, iPad, or iPod touch
Similar Messages
-
Hi, I would like to deactivate CS6 from my old laptop and reactivate it on my new one. In order to re-activate it, what is the process? Do I need to download the product like the first time? Is there something to be careful of? Thank you!
Hi petrosk47967892,
In order to reactivate this product on a new machine, you can simply download & Install the product on the new machine using the following link and enter the serial number when prompted. Make sure to deactivate the product from your old machine by launching any one of the products, go to Help>Deactivate/signout.
Download CS6 : Download CS6 products
Cheers,
Kartikay Sharma -
I have a problem with iphone4
I bought a used and unlocked iphone4
old apple id because the first owner dies
please help me how to activate iphone4
I unlocked with icloudfherly nur arief wrote:
I unlocked with icloud
If you had already removed the device from 'Find My iPhone' in iCloud, then you jus tneed to powercycle the device in order to activate it.
Source: http://support.apple.com/kb/TS4515
"After the device is removed from the previous owner’s account, turn the device off by pressing and holding the Sleep/Wake button located on the top-right side of the device. Then restart your device and proceed with device setup as you would normally."
If it has not been removed, then the activation lock is still active.
If the previous owner cannot remove the device from their account there is nothing you can do unless the place you purchased it from will give you a refund.
Activation Lock: http://support.apple.com/kb/ht5818
What if I purchase a device that is still linked to the previous owner's account?
Contact the previous owner as soon as possible and ask them to erase the device and remove it from their account. For complete instructions, read how to remove a device from a previous owner's account.
How do I check for Activation Lock before purchasing a used device?
When purchasing an iPhone, iPad, or iPod touch from someone other than Apple or an authorized Apple reseller, it is up to you to ensure that the device has been erased and is no longer linked to the previous owner’s account.
Follow each of these steps to make sure that you can use the device you purchase:
Turn the device on and slide to unlock.If the passcode lock screen or the home screen appears, the device has not been erased. Ask the seller to completely erase the device by going to Settings > General > Reset > Erase All Content and Settings. Do not take ownership of any used iPhone, iPad, or iPod touch until it has been erased.
Begin the device setup process.After choosing a language, choosing a country, and connecting to a network, the device will begin activation. If you are asked for the previous owner’s Apple ID and password, the device is still linked to their account. Hand the device back to the seller and ask them to enter their password. If the previous owner is not present, they can remove the device from their account by signing in to icloud.com/find. Do not take ownership of any used iPhone, iPad, or iPod touch until it has been removed from the previous owner’s account.
You will know that a device is ready for you to use when you are asked to “Set up your iPhone", “Set up your iPad", or “Set up your iPod” during the device setup process. -
How to de-activate on one computer and reactivate on another
getting a new computer at work. I am the admin of the team subscription and need to deactivate from the old and reactivate on the new. How is this done?
http://www.adobe.com/products/creativecloud/faq.html
http://helpx.adobe.com/creative-cloud/help/install-apps.html
http://forums.adobe.com/community/download_install_setup/creative_cloud_faq -
How do I deactivate and reactivate student Photoshop on the same computer?
Hello,
I recently had to get my computer upgraded due to a broken heat sinker and the computer experts told me to reformat my computer and reinstall Windows 7 as 64 bit instead of my previous 32 bit. Considering my Photoshop is student version only, how would I be able to reinstall and reactivate without having to purchase it again?
Thank you in advance.Well since you did not deactivate it before reformating you would have to reinstall it but activation should be automatic since it is the same computer. if it is a problem then you have to contact customer support and explain that you have a student license and that you had to reformat your disk in order to get your computer up and working so you could not deactivate the license before reformating. The can reset the activation for you on their end and you will then launch photoshop and activate it normally.
But I do not believe that you will need to activate it since it was already activated on your computer before and the the fact that the harddrive was reformattted should not be an issue as activation is supposed to be by the computers serial number as opposed to harddrive specific.
So just install it an launch it if the activation needs to be repaired it will probably be done automaticaaly by Adobe. -
I have had my IPAD2 for quite a while but haven't activated my cellular data for about a year. I am now trying to activate and when I go to cellular data, turn it on and try to tap view account i just get a message that says "connection to server lost". I could swear the last time I used cellular data you would see the signal in the upper left corner and I only see "no service" there, I am in a location where I know I should have service. Is there something I should do to my IPAD? I tried resetting, I tried clearing cookies and history in Safari (after reading a post n these discussions). I don't know what to do next. My IOS version is 6.1.3. I did go into Network from the general tab and I see it says "SIM not provisioned". HELP and Thank you in advance.
Hello Theresa818,
Thank you for using Apple Support Communities!
It sounds like the cellular data will not activate for some reason on the iPad.
I found this article that will help you resolve this issue here, named iPad (Wi-Fi + Cellular Models): Troubleshooting a cellular data connection, found here http://support.apple.com/kb/TS4249
Check for a carrier settings update.
Update your iPad.
Toggle the Cellular Data setting off and on under Settings > Cellular Data.
Restart your iPad.
Tap Settings > General > About. Locate the Carrier entry and make sure that your carrier is correct.
If your SIM card has SIM PIN enabled, try turning it off: Tap Settings > Cellular Data > SIM PIN.
Make sure you're in an area of good coverage. If the cellular data connection works in another area, contact your carrier to report the original affected area.
Reset network settings: Tap Settings > General > Reset > Reset Network Settings.
Restore the iPad as new.
If none of the above steps resolves the issue, make an appointment at an Apple Retail Store, contact your carrier, or contact AppleCare to troubleshoot further.
I know you may have done one or two of the steps here, so you can skip those.
Take care,
Sterling -
I am having trouble with iMessage being activated. It has worked up until yesterday and now won't activate and is saying no address in the send and receive section. My number is there but not ticked. Any suggestions on how to fix this? I have shut down my phone, but still no luck!
iMessage and FaceTime went down yesterday for some people. Mine is still down. My iMessage is saying the same thing about being activated. Sounds like you are still down too. Ignore the status page that says everything is fine - it lies.
-
I have an IPad 2 and an Iphone4, but as it suggests that I can click a photo on my iPhone and the image will also reflect simultaneously on my IPad does not happen, though I have activated cloud on my iPhone. What could be the problem.???
Also in my iPhone4 the photos that I have downloaded manually from my computer cannot be erased from the phone, how do i do this.???Sounds like you are not running iOS 5 ..........
Update your iPad 2 to iOS 5............
I purchased an iPad 2 for my wife for Xmas and it did not come with iOS 5 so I had to update it......
http://www.apple.com/icloud/get-started/
http://support.apple.com/kb/HT4972 -
I did a software upgrade to IOS6 and my Iphone4S is now unable to update. Do I lose all my contacts and calendar entries when I restore?
You should be syncing all your contacts and calendars with your computer, either via iCloud or iTunes, so it is easy to re-sync them back to the phone after you restore.
-
I am experiencing problems with Sharpener Pro 3 as an Aperture 3 plug-in. These are: the Pre sharpener continually asks one to buy or activate and the Output Sharpener causes Aperture to hang. Following discussions with Nik Software I have removed all duplicate fonts and tried using a new user account. Neither of the courses of action worked. Have other users experienced these difficulties? Can you suggest an alternative remedy?
I am experiencing problems with Sharpener Pro 3 as an Aperture 3 plug-in. These are: the Pre sharpener continually asks one to buy or activate and the Output Sharpener causes Aperture to hang. Following discussions with Nik Software I have removed all duplicate fonts and tried using a new user account. Neither of the courses of action worked. Have other users experienced these difficulties? Can you suggest an alternative remedy?
-
My hard drive had to be recently reinstalled (5 days ago) with the software being 100% totally new, and totally up to date.
I therefore do not have iwork 09 which was purchased as a family pack (via download). How can I download it again without purchasing, and reactivate iwork09? It does not show up in my App store under purchases, as it was purchased a few years ago.It has always been very basic to always maintain a backup copy of your computer for just such an occasion. Use your backup copy to put everything back.
You can transfer itunes purchases fom an iphone: Without syncing : File Transfer Purchases
or you can redownload them. Open itunes store, click Purchased, under Quick Links. -
I have updated software on itunes and my iphone4 and at least 100 of my songs in itunes will no longer play or sync on to my iphone. They all have an exclamation mark! to the left of the song title in the library. Please help!
Read the threads over on the right under the heading of More Like This
Allan -
hi there my iphone 3gs is an openline but im using 02 sim card..when i am trying to update it on itunes it restore all the system..but when im trying to activate it..it dosent want to activate and my sim is no longer detecting on my phone..any ideas on ho
I wa aware
I was rather hoping it might generate some info that might be of use to help OP it doesn't make much sense as it stands without a tedious Q&A session -
How to activate and deactivate the text fields in subscreens
Hi All,
I have one requirement to activate and deactivate the fields in Sub screen.
The requirement is initially the all screen fields are output field with some value .Suppose user want to edit the value, they choose the check box then automatically the sub screen fields are changed to input modeu2026
How to validate these settings in the sub screens..
Thanks & Regards,
SamantulaHi,
if it is report then use the both at-selection screen.
if it is in dialog program AT SELECTION-SCREEN OUTPUT instead of PBO and AT SELECTION-SCREEN instead of PAI
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF p_chk <> 'X' AND screen-name = 'FLATFILE'.
screen-required = 0.
screen-input = 0.
MODIFY SCREEN.
ENDIF.
AT SELECTION-SCREEN.
LOOP AT SCREEN.
IF p_chk <> 'X' AND screen-name = 'FLATFILE'.
screen-required = 0.
screen-input = 0.
MODIFY SCREEN.
ELSEIF p_chk = 'X' AND screen-name = 'FLATFILE'.
screen-input = 1.
MODIFY SCREEN.
ENDIF.
Thanks & Regards,
Vallamuthu.M -
i have unlocked iphone 5.i tried to use it with tmobile.it shows full network but fails to activate and shows sim invalid.how to make it work?
Who was your original carrier; did you call them to ask them to unlock your phone, and are you aware of what their unlock policy is (THey may only unlock for international sims and not US sims
Maybe you are looking for
-
I am assuming the plugin that the Firefox message is referring to is for attaching a file to the email. I say this because at the bottom of a new email it has a link that says "Attach files more easily" which, when you click it, takes you to a setup
-
A/P Invoice and BaseRef(Purchase Order) as parameter of function
Every time i add row in A/P Invoice need to fire some function using formatted search where one of the parameter is BaseRef(DocNum) of the Purchase Order. So lets say formatted search is connected with Price and looks like this: SELECT dbo.example("B
-
How do i create a new table from a *.sql file in JSP
<html> <%@ page language="java" import="java.sql.*" %> <%@ page errorPage="ExceptionHandler.jsp" %> <% Class.forName("com.mysql.jdbc.Driver").newInstance(); String dbUrl = "jdbc:mysql://localhost/test?user=root"; Connection conn = DriverManager.getCo
-
Use of TomTom app on iPhone 4s without cellular network
I want to use the TomTom App when the iPhone is in airplane mode (or is there any other way to interfere with the network - without removing the sim). This because I have a special carphone with dualsim and for correct use the iPhone must be switched
-
Plz help with the router setting ...
my wifi issues are making me go crazy ... i added a screenshot of my router security settings ..(i updated the firmware) can plz someone tell me which setting i need to use. the router type is in the upper left corner thanks!!!