De-Activate/Re-Activate- Have to replace my boot drive

My boot drive has a bad block for the 2nd time in 6 months, so I'm going to replace
I will be cloning the drive via Mac Disk Utility to the replacement drive
I don't want to waste any Activations, so do I DE activate prior to cloning and then Re activate after replacing the new drive?
I assume this will count as only one Activation on one machine?
BTW, Adobe chat seemed clueless about this
Thanks in advance,
Marvin

Well actually I believe that activation is computer specific and not hard drive specific. So deactivation should not be necessary.
You can check with Customer support but you should be fine or just uninsall and reinstall. I believe if the activation has to be repaired it will be automatically done for you.
It might even tell such I had to do this once and so I could not deactivate the license I had to simply reformat the drive and reinstall and when I launc it the first time it told me the the activation had been repaired.
That was my experience.

Similar Messages

My mac mini hard drive is failing. I am no longer under warranty. Do you know how much it cost to have Apple replace the hard drive? or How I can replace it myself?

MY mac mini hard drive is failing. I am no longer under warranty. Do you know how much it cost to have Apple replace the hard drive? or How I can replace it myself?

You can do it yourself. I did on my 2009 Mini
http://www.ifixit.com/Device/Mac_Mini
Also, this place sells HSDs and has install videos.
http://eshop.macsales.com/installvideos/

Hi,I have recently replaced by hard drive with a ssd. My old hard drive has all my iTunes stuff.i would like to install only iTunes programme on the ssd with all the content on the old hard drive. How do I do it?

Hi,I have recently replaced by hard drive with a ssd. My old hard drive has all my iTunes stuff.i would like to install only iTunes programme on the ssd with all the content on the old hard drive. How do I do it?

Install iTunes.
Once install, hold SHIFT and launch iTunes.
When prompted, point iTunes to the correct location for the iTunesLibrary.itl file which should be in the iTunes folder under <user>/Music on the old drive.

XI have just replaced my hard drive and uploaded my backup. Now iPhoto won't launch or reset and relaunch. Suggestions?

I have just replaced my hard drive (more memory) and uploaded my Time Machine backup. Now iPhoto won't launch or reset and relaunch. Suggestions?

Well without no information to work with, try reinstall.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

HT203176 Does the error code "2STF/8/3.ATA-100ata-6-Master" means I have to replace my hard drive?

Does the error code "2STF/8/3.ATA-100ata-6-Master" means I have to replace my hard drive?

It is either a failing/failed hard drive, or a problem with the controller, which means logic board. If you Macbook is old enough to be running Tiger (which is what this forum covers) then the answer to your question is no, you need a new Mac!

Does the error code "2STF/8/3.ATA-100ata-6-Master" means I have to replace my hard drive?

Does the error code "2STF/8/3.ATA-100ata-6-Master" means I have to replace my hard drive?

Could be either the hard drive or the logic board.

Have you replaced your optical drive with a second hard disk?

Hi guys,
I am currently thinking about replacing my optical drive in my MacBook Pro for a 256 GB SSD, as my main hard drive is getting filled up.
Have you replaced the optical drive in your computer, and what is your experience? I'm looking at either OptiBay or OWC Data Doubler. Which would you recommend?
Thanks!

Actually I'm about ready to do this myself.
I installed a SSD in my Windows 7 desktop PC about 9 months ago and the difference is just amazing.
I bought a new Dell Latitude and got it about a week ago, very fast but not as fast as my desktop. I then ordered a modular bay hard drive enclosure to replace the optical drive and another SSD. Installed the drive I had as my boot drive, a 750GB 7200RPM drive, in the modular bay enclosure and installed the SSD as the main boot drive. System screams.
I then look at my MBP late 2011 with i7 CPU and the 5400RPM drive that comes with it. Slow comparatively.
So I've been hunting around and I think I've settled on the Optibay as it comes with a optical drive enclosure and the proper cable to connect that drive to a USB port.
I will mount the SSD in the optical bay caddy and make that my Boot drive leaving the original HDD where it is as the mounting system for it has shock absorbers. The SSD I will get willl be the 6GB type as but the main SATA port and the optical bay port are both 6GB.

I have to replace my hard drive in my 2008 macbook. HOW DO I BUY A NEW HARD DRIVE???

The apple genius said I can easily buy one online and a 10 year old could put it in. However, all of the hard drives I'm seeing mention PC rather than Mac.

SATA drives are the same for Mac, PC or PlayStation. It's the way that they're formatted that make the difference.
For a hard drive try Newegg.com http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives&Order=PRICE
Or OWC http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
Here's instructions on replacing the hard drive http://creativemac.digitalmedianet.com/articles/viewarticle.jsp?id=45088
To transfer your current hard drive I like the free application Carbon Copy Cloner. It makes a bootable copy of everything on your hard drive http://www.bombich.com/index.html You'll need a cheap SATA external hard drive case. Put the new drive in the case and clone your old drive to the new one. Then replace your old hard drive with the new one.
With the new drive plugged in, open Disk Utility. It's in the Utililities folder in your Applications folder. You should see the new drive in the left hand column along with your other drives. Click on the new drive and select the Erase tab. Set the format value to Mac OS Extended (Journaled) and click the Erase button. After that has finished select the Partition tab. Type in a Name for your hard drive and select how many partitions you want from the Volume Scheme. The usual setting is one partition. Click on the Options button after you've selected a partition to make sure it's set for GUID. Then click the Apply button and after the partitioning is done quit Disk Utility. Your new drive should now appear on your desktop. Then clone your old drive to the new one.
Here's a cheap SATA external hard drive case on eBay http://cgi.ebay.com/USB-2-5-SATA-HDD-HARD-DRIVE-EXTERNAL-ENCLOSURE-CASE-BOX-/120 636286623?pt=PCC_Drives_Storage_Internal&hash=item1c167ba69f

So i have to replace my hard drive...how to choose?

I have a lenovo t61 and I need to replace the harddrive, but I dont know what to look for. Will any hardrive work, what does it need to have? Does it need to be a lenovo specific one? Thanks for any help

The 7200 rpm is faster in seek and transfer speed for obvious reasons, but it also consumes more battery power as you maybe aware, in addition it generates slightly more heat. So you got to weight up which one is more important.
The cache size will decrease harddrive spin time slightly by prefetching certain data, but nowadays in laptop it is more important in shock proofing feature (do you know how G-shock in Sony CD walkman functions?), as when the laptop detects unbalancing motion, it will quickly park its head to prevent physical damage (usually the whole process completes within a few millisecs). If you have a large cache, the hdd would transfer the likely needed data from the platter to the cache, so you wouldn't experience the sudden stop start process, obviously how well this cache works, would depend on the amount of data you use within that milliseconds and how long the shock lasts for.
If you do lot of video editting, then this cache would be inadequate, but if you are listening to MP3, then it work quite well.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

I have just replaced my hard drive and downloaded Yosemite and now I can't access my photos from my external hard drive

II've just replaced my internal hard drive for my desktop because it failed And installed Yosemite. I had an external hard drive but it had Mavericks and now I can't access my old iPhoto. What can I do?

backup your iPhoto and install iPhoto 9.6 - if you had iPhoto '08 or earlier then you need to download and run the iPhoto library before launch iPhoto 9.6
If that does not help then you actually need to tell us information and details - like version of iPhoto. exactly why you can not access your photos and any message you got
LN

I have to replace my hard drive as it is failing, I'm away and just bought a new external HD for backups,,only problem is it is fsiling to backup without a reason. Disk utility says ex HD is ok. I need to backup before i get it repaired. Any Advice?

Hi my hard drive is failing and I'm overseas in Thailand. I bought a Buffalo 1TB to back up my mac 13inch HD version 10.6.8, only problem is it wont back up. Disk Utility says ex HD is fine. I need to backup before I take it for repairs. What can I do? Thanks advice appreciated. NL

I think we both had our wires crossed a little.
Then just go ahead and clone your internal drive to your Buffalo. You are not going to use Time Machine, and you do not have to partition it. So ignore all that stuff I posted. Let me start from scratch.
First check that your Buffalo drive is partitioned GUID and formatted Mac OS Extended, Journaled. So open Disk Utility, select the topmost entry for the Buffalo drive. You should see something like this:
I have selected the entry of my CalDigit drive. Note that the Partition Map Scheme is GUID. Now, select the volume (mine is "System Backup."
Here you see it is a Format type of Mac OS Extended, Journaled. If that's what you see then you are good to go.
With Disk Utility still open:
Clone using Restore Option of Disk Utility
1. Open Disk Utility in the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag it to
the Destination entry field.
5. Select the source volume from the left side list and drag it to
the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the Buffalo drive. Source means the internal startup drive.

I have to replace my Hard Drive and I upgraded to Mountain Lion via iTunes download. Am I going to face issues?

I'm planing on installing a Seagate Momentus LP 1TB internal drive. I've read that it is difficult to formatt the HD to macs on OS systems prior to Mountain Lion. I was running ML when I crashed but I don't have an instalation disk for Mountain Lion given that I downloaded it from iTunes. Any advice or words of wisdom. Thank you.

Install Mavericks, Lion/Mountain Lion on a New HDD/SDD
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your external hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Every boot i have to select my boot-drive in BIOS. (Z97 Gaming 5).

Hi there,
Z97 Gaming 5 Boot Drive issue.
It appears with 80% of boots i am forced to enter BIOS and point it towards my SSD boot-drive. Sometimes the SSD boot drive doesn't even show up and i am forced to constantly reset/power down until it shows up in BIOS. I am running the shipped BIOS and wondered if anyone has rectified this issue without being forced to flash? After reading about people bricking their Z97's and/or flashing to no avail i wasn't too keen on the idea.
Any support is appreciated, thanks.

Thank you all for your replies. Thanks Svet.
@ flobelix, my OCZ is also a Vertex 2. Well thats fantastic... OS and everything installed on this drive. Curious as to how they cannot be compatible? And why it runs flawlessly once I'm in Windows?
Thanks to this new information Flobelix i came across this thread on Google (http://www.tomshardware.co.uk/answers/id-1865874/ocz-vertex-ssd-recognized-boot-uefi-clock-resets-z87x-d3h-4770.html). Seems a workaround is (if this mobo has one, i need to check) to plug the SSD into an alternative SATA3 controller port (not the Intel SATA ports). Otherwise we're pretty much sh*t out of luck. Which is pretty terrible IMO. Glad mine is only a 120GB.

How do I replace the hard drive?

I got a message that my internal hard drive is failing, and I need to back up the data I can and replace it.
I'm running a 27' iMac and I can open any of the users except for the main one. The unit just freezes while booting, unless powered up in safe mode.
Is it possible to do this myself, or ... what options are open to me?
Thanks.

If you have never worked on a computer before and, especially, working inside Macs, in general, and iMacs, specifically, then this is NOT a DIY project for you to undertake.
The aluminum model iMacs are an excersize in patience and tedium to get at anything inside.
Take your Mac into either an Apple Store or Apple Authorized repair service center and pay to have them replace the hard drive.
Apple uses proprietary hard drives that have a special connection for temp sensors that control the iMac's internal fans.
Try and get a backup of your data before you bring this in for the hard drive replacement.
Good Luck!

How to Replace existing Hard Drive with new Hard Drive, while keeping old files

Hi All,
I have recently replaced my hard drive on my Macbook Pro, with a new hard drive. The old Hard Drive was 160 GB, while the new one is 320 GB.
What I did before replacing it was clone my hard drive using "SuperDuper". I cloned it to the new hard drive and then simply removed my old hard drive and installed the new one with the clone on it. Then I booted it up and began running it. In fact I am using it right now.
My questions are:
Is this a good practice?
Will this work, without problems, indefinitely?
Is this the prescribed way to upgrade ones laptop hard drive?
The reason I did it this way was because I upgraded to Mountain Lion via the apple store download and I do not have the CD for the OS. So I figured if I could make a bootable copy, that might work. So far everything seems fine, but I really just want to know if this will last for a long time. I plan on also making a partition with Windows on it also, so I was wondering if anyone can comment on that too.
If anyone can comment or give any advice on this topic I would really appreciate it.
Thank you very much!
Cheers.

Every thing is fine except Super Duper does not clone the recovery partition. If you start your MBP holding the OPTION key, you should see the internal HDD and the ML recovery partition.
You can reinstall ML or reclone using Disk Utility>restore.
Ciao,.

De-Activate/Re-Activate- Have to replace my boot drive

Similar Messages

Maybe you are looking for