De-assign MIDI control?

Is it possible to de-assign a MIDI control? As it is, two of the rotary controllers on my Axiom 25 are assigned to channel strip faders and pans, respectively. This seemed to be so by default; none of them show up in the Controller Assignments pane. Does anyone know if there is a way to delete these assignments?

Your controller is sending MIDI volume (7) and Pan (10) data, which the selected channel will respond to.
If you don't want your controller to control the channel strip, then don't send that info, or change the CC numbers the controller sends. There are ways of filtering, or transforming it in Logic, but the simplest solution is to not send those specific messages which have a specific MIDI function in the first place.
If you want to use you controller to control other things, stay away from using those specific MIDI CC numbers that do specific things (modulation, volume, pan, expression, bank changes, mode changes etc)

Similar Messages

  • Is it possible to assign MIDI control to change tempo?

    I would like to be able to change tempo (say, from 120 to 180 bpm) by using a fader from a MIDI keyboard (Edirol PCR-30). I can assign MIDI commands to Logic's buttons, volume, pan... but I can't figure how to do it with tempo. Any help would be appreciated.

    Environment-->New-->Fader-->Specials-->Tempo Control
    You get a fader which you can then assign a MIDI control command to.
    I've heard somewhere that this is really buggy in recent years so use at your own risk, but at least in theory that's how you do it.
    -Dan
    G5 2.3   Mac OS X (10.4.5)   RME Digiface

  • How do I assign midi controls to 2 separate plug ins in the same channel strip?

    Hi
    I want to set up my Oxygen 2 to control my eq and compressor in the same channel but when I set the 8 knobs to the EQ parameters and then try to do the same to the compressor, I either have to delete the eq controls or have them both assigned to the same knob, which is obviously not what I want to do as changing one knob effects the other plugin. I thought whatever plugin I click would be the one that gets the midi focus, but clearly not, any ideas?
    Thanks
    Christian.
    PS Logic 9 by the way.

    Put the effects on two separate auxes and send the sound to both. Install both auxes in the arrangement and assign your knobs for each one. Then you can select each aux track when you want to control its effect. Or use 4 knobs for each.

  • Can you assign MIDI instrument parameters as MIDI CC assignments (quantize, transposition, etc)?

    Hello!
    Is it possible to assign MIDI controller CC assignments in a way that will allow me to control the following Logic MIDI instrument parameters via knobs on my MIDI controller?
    I would love to have control over the following parameters with whatever track or MIDI region is selected:
    Quantize
    Transposition
    Velocity
    Delay
    My Akai LPD8 is begging me to be able to assign these parameters as CC events with the Akai LPD8 controller editor software.
    It might seem silly, but being able to twist a knob to control toggling between these drop-down parameters would make for some intuitive, hands-on creative control while in performance/creation mode, or really as a means to audition different ideas. Why should these tools be only for tedious editing?
    I understand that I wouldn't be able to record these event changes as MIDI automation data, but they would be great to get a feel of what I am looking for during creative sessions.
    Anyone know if this is possible? I didn't see that it was obvious to do so, though I am just getting into mapping my custom controls with Logic.
    Thanks so much!

    Thanks for the reply....
    I actually tried freezing the software instrument track and that had little if no effect on CPU. I then read in the book or somewhere that the freeze function really only works on effect plugins. Don't know if that's true in all cases, but that seems to be what's happening.  Still would like to combine these tracks and I'm guessing I'm going to have to get creative with bussing or subgroups to make this happen. Unfortunately I think the fact that my Presonus board has hardmapped output routings for all the inputs makes that difficult, but haven't actually tried yet. I'm thinking if I can reroute the midi modules audio output input into the Presonus to a subgroup and then route the software instrument plug in to the same subgroup that I can then mix/capture this and hopefully route the audio's input to the subgroup to pick up the mix.
    Does this make sense to anybody reading this?
    We'll see and I'll post the results if it works....
    thanks...b

  • Midi control of Logic plugins

    Does anybody know how to assign midi controllers to parameters in the plugins.
    In L7 I used Command-L to get the plugin to learn the midi controller.
    I have the same key-command in L8, but nothing happens when I try to use it.
    Any help greatly appreciated.
    -Kim

    Maybe in your setup Command+L is already assigned to another function with a higher priority? I use F4 for the learn function and control+C to open the Controller assignment list and it works well.

  • MIDI control besides the basics

    Hi,
    I'm rocking iPad Garageband from an M-Audio Oxygen49 MIDI controller keyboard.
    I'd like to use the sliders on my keybaord to control different parameters in the instruments, like the filters on synths, or the drawbars in the organ.
    Does anyone know if these instruments can be controlled in this way by MIDI?
    Thanks
    Paul

    Anyone got song position midi control to work with the duet or any other control surface?
    The Key Command dialog handles much better with any midi controllers. It supports multiple midi events, sysex messages etc... For example I can use same CC# number with different ranges to control Rewind, Forward i.e CC12 ( 0-0 ), CC12 ( 1-1 ) assigned for different buttons of my external controller.
    !http://img4.imageshack.us/img4/8863/ctrlassign.gif!
    [www.audiogrocery.com|http://www.audiogrocery.com]

  • Midi control assignments on KCom Window are removed

    I cannot exactly understand in which precise circumstances it happens, but every time I switch on my Mac, launch Logic8 and open the song I was worked on, Midi control assignments on KCom Window are disappeared. I reput them 5 or 6 times but they aren't saved.
    Any comments?

    Preferences are saved to pref files when Logic quits.
    Create an assignment, quit Logic, restart Logic. If that assignment is not there, that indicates possibly a permissions problem, where the preferences can't be written.

  • In Logic Pro 9, how many midi controlled software instruments do you get...?

    In Logic Pro 9, how many midi controlled software instruments do you get and is there possibility to download more as it says 40 on the programs info on the Mac Store, as i intend to compose on it but with only 40 instruments it's not really worth it.
    So i was just wondering whether it let you download more for free.
    Thanks for reading
    ~Matt

    Yes: I too am interested in the software instruments available in Logic Pro: one has to be a bit wary of the jam packs because there don't seem to be many solo instruments included. But I looked at the Logic screen in an Apple store the other day, and it worked like GarageBand in
    this respect: you created a new track choosing the software instrument option and a whole lot of instruments came
    up in a column on the right: lots of solo wind instruments, plenty of keyboards and guitars of course and not very many solo strings, only one violin, in the world music subsection under Irish fiddle. Yehudi Menuhin
    where are you when we need you?
    What I've been trying to find out is which part of the purchase does this long list of software instruments arrive with, because it's basically the only reason
    I'm interested - I get on fine with gb but it
    Just hasn't got enough instruments, and as I say the jam packs don't seem
    to resolve this ? Or do they? Could someone please help
    me with this?

  • Assign Access Control HTTP 404

    The assign access control throws the http 404 error when i try to provision from shared services. It however works from workspace. Is this a known issue on 11.1.2.2? If there are any ways to make it work, Please post.

    ak123 wrote:
    Its the same when I try from both port 28080 and 9000.So are you running the embedded http server on port 9000? if not and you are using OHS then try accessing Shared Services through that port e.g. http://<sharedservices>:19000/interop/index.jsp
    Actually I am not sure that matters with HFM and you can go direct through 28080 or 19000, worth a try, if not maybe it just needs registering again as Pablo said.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Midi controlled sounds

    My midi controlled sounds cut off when controller keyboard note is lifted creating a click as the "sample is stopped" any Ideas ?
    this is domianent on piano patches

    Thanks for your reply Blueberry. The fact that I have overlapping objects is not in dispute here. What effect does it have? I don't understand what difference it makes in terms of the operations within MainStage2. That's what the question is.
    As it turns out, there are several objects highlighted in blue (in layout view), but that doesn't tell me what it means. In the layout view, I had put pedals and switch controllers together based on the keyboards they are connected to, and they match the physical layout I have on the floor. I also put pitch and mod wheels next to each of the keyboards. I don't know whether I need to do this, but I thought it would help to see what's going on, and to map functions with controls.
    Is it an innocuous message telling me that the graphic might not be clear, or is it saying that there is an underlying configuration issue which will prevent operation ? If it's graphical, then it still looks like I want it to look, but if it's something programmatic which will disable functionality, then that's a different story. In that case, I want to know how to resolve the issue, otherwise there is no issue from my perspective. Things look like I want them to look.
    Still looking for something more conclusive.
    Thanks,
    Glennzone

  • Various FM areas are assigned to controlling area

    Dear Sir,
    While uploading budget throufh KP06 the error is coming :
    Various FM areas are assigned to controlling area 6000
         Message no. F6097
    Kindly suggest
    Regards
    Raj

    Hello Raj,
    There are many different reasons/options:
    1) If you are on EA-PS package 200 you can try note 723605 to avoid the error message.
    2) If you are not on EA-PS 200 (application release 4.7) the reason of the message F6097 is the following:
    If for example Fund was activated in Customizing of Public Sector Management, it is not possible to assigned an company code to an controlling area, that is not FM relevant.
    Please check if it is one assignment available. It can be field fund or the others available in the following SPRO settings:
    SPRO -> Public Sector Management -> General Settings for Public Sector Management -> Basic Settings: Account Assignment Elements -> Activate Account Assignment Elements
    Please check if you have activated Fund or Functional Area or Grant or Funded Program there.
    How could you solve this problem: Please deactivate the fund (or the one that was active) temporary. Then assign FM area to Controlling Area. Then activate the fund again.
    3) Please notice, the standard is the following:
      COarea CCCC
           >  CompCode 0001     > FMarea FFFF
           >  CompCode 0002     > FMarea FFFF
           >  CompCode NNNN     > FMarea FFFF
    All CompCodes, assigned to the same CO area have to be assigned the same FMarea. This is not so in your case. Because different local currencies in the assigned CompCodes you assigned FM areas with
    corresponding currencies. Result: The assignment COarea <  > FMarea (via the CompCodes) is not ambiguity. This is what the error message of KP06 is saying (note  908908).
    If you want change the currency settings in CompCodes to assign only one FMarea to all CompCodes maybe you have to covert the existing transaction data, too (see notes 89531 and 39919).
    But I found a modification note 779180 it meets your assignments.
    Please check that. Maybe it have to be extend that KP06 will work also then. I'm not sure if it will also work if you assign these CompCodes to the same COarea.
    4) The relation between FM-area and CO-area can only be 1 to n. Because there is no direct relation between FM- and CO-area, you have to check the relations between the assigned company codes to FM- and CO-area. Please read the doumentation under the path:
    Public Sector Management -> Funds Management -> Master Data -> Enterprise Structure - Organizational Units -> Organizational Structures - Assignments.
    I hope it helps to resolve your issue.
    Kind Regards,
    Vanessa.

  • "Assign Access Control" returns error for essbase apps in shared services

    Hello,
    I installed and configured Oracle EPM 11.1.2 (Foundation, Essbase, Planning, Reporting&Analysis):
    OS: Windows Server 2008 Sp2 (32bit)
    Default Installation with default ports,
    Installation of all components on the same server,
    no clustering
    EPM System Diagnostic says that everything is OK.
    Now I want to assign filter access for an essbase database in the Shared Services.
    Starting the menu item "Assign Access Control" in Shared Services returns the following error:
    Error 404--Not Found
    From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
    +10.4.5 404 Not Found+
    The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
    +....+
    Can anybody help ???
    best regards,
    Nicole

    Hello,
    here's what I found out so far:
    I get the error if I start the shared services console via the URL "http://servername:port/interop/index.jsp" and then select the "assign access control" for an essbase database.
    If I start the shared services console via the workspace everything works fine.
    Does anybody know what to do so that it also works if I start the shared services console via URL?
    best regards,
    Nicole

  • "Assign access control" not appearing under Essbase in shared services

    Hi Everyone,
    Can anyone point out the reason behind this? This is leading to all sorts of problems. Configuration is as follows:
    App Server: Foundation, EAS, Planning, Reporting, Web Analysis, Workspace on Tomcat
    DB Server: Essbase and SQL Server
    Essbase is on Shared Services mode.
    This is actually very urgent. Would be grateful for any help.
    Thanks,
    Sayantan

    This has been posted in the essbase forum > "Assign access control" not appearing under Essbase in shared services
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Unable to use the Assign Access Control feature in shared services

    Hi,
    When I try to right click on the essbase applicaiton in Shared Services to assign access control( to assign a new filter) I keep getting the following error
    " Internet cannot display the webpage" message with the following
    This problem can be caused by a variety of issues, including:
    Internet connectivity has been lost.
    The website is temporarily unavailable.
    The Domain Name Server (DNS) is not reachable.
    The Domain Name Server (DNS) does not have a listing for the website's domain.
    There might be a typing error in the address.
    If this is an HTTPS (secure) address, click Tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section
    All the services are running file and I can create new users/ groups and also perform appication migration.
    I'm using Hyperion 11.1.3.24 on windows 2003 r2.
    Any help is appreciated. Thanks.
    Regards

    vs wrote:
    John,
    I tried the refresh button and nothing appears. I have created a group and gave it filter access. Now I'm trying to attach that filter to the group.
    Appreciate your help.Can we replace backup .sec file for shared services?
    For example: In planning if the .sec file corrupted then we replaced with old .sec file...rite...the same way can we do it in shared services?
    I know if we replace the old sec in planning...it will take old securities only...
    Edited by: Prabhas on Feb 12, 2013 9:27 PM

  • Shared Services Assign Access Control for Essbase

    Hi we have a used who has his provisioning in form of filters in essbase group. I tried assigning his filter to thim through Assign Access Control in shared services. I'm able to see the user and also the the filter I created for the user but when I try to assign it to him and save it is really not getting assigned. It still stays the user doesnot have any filters assigned to his account. Am I missing anything.
    Thank you.

    Have you given maxl a try:
    grant filter appname.dbname.filtername to user;
    Cheers
    John
    http://john-goodwin.blogspot.com/

Maybe you are looking for