De-authorize computers not possible

hi,
I tried to de-authorize all the computers that i authorized for using my purchased music. But when i log on to my account panel there's no button to de-authorize the computers. It just says i authorized 4 computers but i lost track of which computers they are. I never used this option. So the "deauthorize-only-once-a year" rule doesn't apply...
does anyone know how or what?
thanks

You will only see that button when you reach the maximum of five authorizations. If these are individual systems, you'll have to deauthorize each one individually through iTunes on each system. If you've forgotten which they are or can no longer access them, then you could authorize a fifth system at which point the Deauthorize option will appear in your iTMS account.

Similar Messages

  • Authorization creation by ODS((0TCA_DS01) not possible on PRD system

    Hi friends,
    I am setting the authorization values by using ODS(0TCA_DS01)(uploading file data to the ODS and then creating it via RSSM). But it is not possible on PRD system on which system is set as "No change to repository cross-client customizing objects".
    Are there good solution to set the authorization values by ODS method on PRD system?
    Kind regards,
    Masaaki

    Go to /nsu53 and see if u have no authorization in PRO then go to DEV assign authorization & then transport the same to Production.

  • I try to sinc. first i get "computers not authorized, would you like to authorize. I do that then it tells me its already authorized.  enter and it starts over.

    I try to sinc. first i get "computers not authorized, would you like to authorize". I do that then it tells me its already authorized.  enter and it starts over.

    Google is amazing...
    http://support.apple.com/kb/HT1420
    also you can:
    To deauthorize all computers associated with your account
    Click iTunes Store in the Source pane.
    If you’re not signed in to the store, click the Account button, then enter your account name and password.
    Click the Account button again (your ID appears on the button), enter your password, and then click View Account.
    In the Account Information window, click Deauthorize All.
    After that start from scratch

  • HT1420 How can I get a list of authorize computers under an Apple ID?

    How can I get a list of authorize computers under an Apple ID?
    How can I deauthorized a computers under an Apple ID if I do NOT have possession of that computer?
    Thanks
    -William

    It's not currently possible to see a list of authorised computers, but if you have 2 or more computers authorised then, as described on the page that you posted from, you can log into your account on your computer's iTunes (Store > View My Account, Store > View My Apple ID on iTunes 11) and 'deauthorise all' (which you can do once every 12 months) and you can then authorise/reauthorise the computers that you still have and need.
    Deauthorising a computer doesn't remove any content from it, it just means that you won't be able to use iTunes downloads on it until you reauthorise it

  • Where do i see the list of authorize computers?

    where do i see the list of authorize computers?

    It is not possible to see a list.  You can see how many are authorized by going into Store > View My Account, but they will not be listed.

  • How Can i De-authorize computers from my itunes account

    as people may know it is only possible to have 5 computers authorized to play itunes music however how can i de-authorize computers i don't have anymore, or computers that been restored back to factory settings. as i have 4 registered but only have one computer in use

    first of all you open up your itunes, go to itunes store and on the right side you should find "Account" click on that and log in, there should be a button right underneath Change Country, if you click that button, it should reset the authorization back to 0, and you have to re-authorize the computers that you use. If that button doesn't appear you might have to authorize another computer to make it 5 authorized, and then reset the authorization.

  • My main computer broke, can i use one of the 5 authorize computers to purchase and download songs

    My main computer broke, and I want to know if I can still purchase and download songs to my apple devices using one of my five authorize computers? It is my wife's computer and she also uses itunes. Can I log her off and use my log-in?

    Thanks for your reply, Niel. Basically, I can log in into my wife's computer, log in and download new music I purchased or from a CD into my ipad/iphone/ipod with out a problem since is one of my 5 authorize computers? Sorry for being so inquisitive but I'm not the best when it comes to itunes.
    Will all my music load into itunes if once I sign in? or will it just load the songs I've downloaded from the itunes store?
    Many Thanks!

  • Workbook error 310 - save not possible

    Hi,
    when I want to save a workbook I receive error message 310 - saving not possible. Nothing in my authorizations where changed. In sdn I found also no hint.
    Any idea?

    Hi,
    Please check out the SAP Notes in the link:----
    Error 310 when creating an workbook
    REgards,
    Suman

  • Logon is not possible because you have not been assigned to a business role; please contact your system administrator

    Hi experts,
    I'm having a problem when our project approaching the end.
    If I assigned the business role in parameter CRM_UI_PROFILE and PFCG role in SU01.
    It works fine,and the user can logon the web ui.
    Now I created a new organization model and position,assigned the business role and user to the position.
       A PFCG role was also assigned to the business role:
    Then I removed all the roles and profiles in user master in SU01.
    The user can not login CRM WEB UI and the system raised "Logon is not possible because you have not been assigned to a business role; please contact your system administrator".
    Can anybody suggest what the problem is? Is there any other settings I should make?
    I suppose that,since the user was assigned to the position the organizational model, the system can determine the user's business role, and through the business role, the corresponding PFCG role can also be determined.
    Am I correct?
    Thanks.
    Jerry

    Jerry, yes, you're right.
    Let me point you to pretty good explanation right here: Logon is not possible because you have not been assigned to a business role; please contact your system administrator
    So business role determination is taken in three steps (you can observe them in class CL_CRM_UI_PROFILE_DETERM method LOAD_PROFILES):
    1. From user's parameter  CRM_UI_PROFILE (method LOAD_FROM_USER_PARAMETER);
         If  CRM_UI_PROFILE = * then the user needs to have S_DEVELOP authorization object with OBJTYPE = 'DEBUG' (debug authorization).
    2. If not found on previous step: From organizational management (method LOAD_FROM_ORG_MANAGEMENT)
    3. If not found on previous steps: Based on PFCG roles (method LOAD_FROM_PFCG_ROLE);

  • Workflow not starting and RFC status is 'User Switch Is Not Possible'

    Hi All,
    I am using ABAP classes to raise an event that triggers the workflow.
    When I am executing the workflow from SWUS or raising event from SWUE or SE24, the workflow is starting fine.
    But when I am raising the event from a Webdynpro application, the same event is raised, but the workflow is not getting triggerred.
    I could see a record in SWEL, but the workitem is not created.
    In SWEL, it is showing the RFC status as 'User Switch Is Not Possible'.
    When I go to SM58, I am able to re-execute the failed transaction and this time the workflow is getting triggered.
    The same workflow is working fine in D env. but not in T env.
    The event linkages are all same and I also used the COMMIT WORK statement after raising the event.
    Another problem is the RFC status is sometimes set to SYSFAIL and sometimes as 'System overloaded, repeat immediately by batch' other than 'User Switch Is Not Possible'.
    Please help.
    Thanks,
    Cay.

    Hi,
    call function module AUTHORITY_CHECK_RFC explicitly before a remote call to be able to treat a possible exception. If the authorization exists, the function module does not return an explicit result but, like all successfully executed function modules, sets sy-subrc to 0. If sy-subrc is not equal to zero then it could be the problem with the user authorization.
    I also think it could alos possible because of your Host name check whether any changes are done to host name.
    Regards
    Pavan

  • De-authorization computers

    How do I de-authorize computers I no longer have access to?

    You can't deauthorise 'dead' installations or computers you no longer have access to individually. However once you reach the limit of 5 authorisations you have the option to deauthorise them all in one go from your iTunes account and start over. *Just note that you can only use this option once a year*: About iTunes Music Store Authorisation and Deauthorisation
    Once you have all 5 authorisations used up, to deauthorise all computers associated with your account:
    1. Click iTunes Store in the Source pane.
    2. If you're not signed in to the store, click the Account button, then enter your account name and password.
    3. Click the Account button again (your ID appears on the button), enter your password, and then click View Account.
    4. In the Account Information window, click Deauthorize All.

  • Satellite Pro M70-113: Not possible to write on CD-R and DVD-R

    Hello,
    I have a Toshiba satellite pro m70-113 laptop.
    Reading Problems:
    I am unable to read any cd-r. This is really strange as a couple of days earlier those CD-R were reading fine on my drive.
    and when i click the cd drive in my computer an error dialog shows and says F: is not accessible/incorrect function. Here is a screenshot for the error..:
    http://img64.imageshack.us/img64/9574/1bp3.jpg
    And when I try to read my DVD-R, some times they read fine but sometimes it doesn't read it and the LED of the drive keeps lit when it doesn't read the dvd-r.
    When it doesn't read the DVD-R, the following error comes: Screenshot here: http://img172.imageshack.us/img172/9674/2bc0.jpg
    Writing Problems:
    After getting the reading problems I tried to test my drive for writing.
    And i found that I am unable to write on cd-r. I used alcohol, and Nero both but no success.
    Though same content when burned on cd-rw its a success.
    I am able to burn successfully on DVD+RW 4x media, with data amounting to almost 4.34GB for DVD5..
    When I insert a DVD-R media the drive doesnt detect it as a blank media and the LED keps on lighting constantly and so nero at this state doesnt detect my dvd drive even! So i am not able to write to my DVD-R media..
    In short: only write to RWs is possible for both, cd-r and dvd+RW, and no writing possible on CD-R and DVD-R.
    Please help me.
    It's only 7 months since I purchased this notebook and believe there can be no other person on this planet who takes care of the drive better than me!
    Really, I have not used this drive much and never inserted scratched/degraded/local media, only moserbaer media.
    Thank

    Hi
    Well, according to your description it sound like the drive cannot calibrate the lens and therefore its not possible to read or write these medias.
    Usual its not possible to fix this and the drive replacement is needed.
    You can also check the user manual. There you can find a list with all supported and compatible medias.
    I have found also this topic in the forum:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=13170&messageID=48243

  • Roll-up not possible; no filled aggregates available

    hi sapgurus,
            I am facing the following while running my process chains:
    Roll-up not possible; no filled aggregates available
    Rollup is ended with error;
    My problem i don't have sufficient authorization to cube to do the manual roll
    Please help me,and how to proceed with this error.

    ashwin,
      Thanks for your reply.
      Though i am not able to see the data in cube,i am able to see the aggregates in the cube by clicking on aggregates button on right side of the cube.
    I observed that button "filled/switched off" is red should i activate them .How to do that?.
    Please help me with this?.
    thanks in advance.
    Message was edited by:
            NRUPAL CHOWDARY

  • Error  M8147 Account determination for entry CPES PRD not possible

    Hi all
    Im getting this error when a try to make a goods receipt whit trx migo and materials whitout material number and GR goods receip: 101. I try with the trx omjj whith movement type 101 and account grouping and then I don´t know how to do, I read I need a new entry here, but I don´t know how to do this. Some one could tell me if I´m doing the things right or exist any other way to solve this problem?
    Here´s the exactly message error.
    Account determination for entry CPES PRD not possible
    Message no. M8147
    Diagnosis
    The system did not find an account for this transaction. This means that the account determination for key CPES PRD is not maintained in MM Customizing (Valuation). The key is made up of:
    Chart of account
    Transaction key (= Posting transaction)
    Valuation grouping code
    Account grouping code
    Valuation class
    System Response
    The system cannot update a G/L account for this transaction. You cannot post the transaction.
    Procedure
    Contact your system administrator.
    If you have the authorization, check the Account determination in Customizing for Valuation.
    Proceed
    Note
    The relevant posting transaction can be found in Table T030A.
    Best regards
    Edited by: Alvaro Olmos on Aug 21, 2010 2:36 PM
    Edited by: Alvaro Olmos on Aug 21, 2010 2:40 PM

    Hi,
    Use t.code: OBYC,  Double click PRD, Enter Chart of Account.In next screen ,click RULES in application tool bar & then in next screen  select check box of  Debit/Credit but  do not select check boxes valuation class, valuation Modifier & account modifier & save.( not required as price difference will goto  one generic G/L).
    Now come back & again use t.code: OBYC, Enter Chart of Account, Double click PRD & enter your G/L account for Debit/Credit& save.
    Now try your transaction doing MIGO, you would not have any error now.
    Better involve FICO consultant for the above steps.
    For more check the link:
    http://www.scribd.com/doc/2531210/SAP-FI-GL-CONFIGURATION
    Regards,
    Biju K

  • Request does not contain any saved update rules; rollback not possible

    Hi,
    In BW on hana, there's a 3.x flow DSO where it loaded a request from PSA.
    It failed due to activation error SID Generation.  But unfortunately, due to PSA Deletion process chain, it's PSA Request got deleted.
    Now, we couldn't delete the red request(failed request) from the 3.x flow DSO.
    If we try to delete, it shows job has been completed successfully with the following message:
    Job started
    Step 001 started (program RSDELPART1, variant &0000000004233, user ID )
    Delete running: DataStore object ZREBATE, from 630,138 to 630,138
    Delete is scheduled; Selection conditions were substituted
    Request REQU_6412GVIEWBJ0TZZIMZE2TZIOR does not contain any saved update rules; rollback not possible
    Deletion of request REQU_6412GVIEWBJ0TZZIMZE2TZIOR from data target ZREBATE failed
    Deletion of request REQU_6412GVIEWBJ0TZZIMZE2TZIOR from data target ZREBATE failed
    Request REQU_6412GVIEWBJ0TZZIMZE2TZIOR does not contain any saved update rules; rollback not possible
    Job finished
    I went to the table RSICCONT and checked the mentioned request.  But I couldn't find delete option enabled.  Even our basis team doesn't have authorization to delete the  mentioned request from the standard table RSICCONT.
    Request you to please help me how to handle this.
    Regards,
    Antony Jerald.

    Hi Antony,
    Once you have deleted the data in PSA there is no way to reconstruct the request hence you can do below things to correct it
    1) Identify the No of Records which having error , because if you have more records it will take more time as in debug mode we have option to edit only one record at one.
    2) Display only one record in Active table and change it using the Debug option ( not recommended ), but as you are in corner we need to use this
    3) change the records with respective values and active the request again
    Regards
    Jagan

Maybe you are looking for