De-Central AE channel monitoring not reached.

Hi,
We are running SAP PI 7.10 SP7. De-Central AE SP7.
This additional AE is situated in the DMZ. It can be monitored by the RWB and is accessible to ID. However when you want to monitor the channels of the De-Central adapter then the browseru2019s is directed to a non-fully qualified domain name. This will not do. It needs to connect to the FQDN. Can anyone assist me in regard to rectify this in the SLD? I assume something has to change in the CIM Instances, but sure where. Also once this change was made do I have to update any cashes?
Your assistance in this regard will be most welcome.
Regards
Willie Hugo

Hi,
This AE is an additional AE which is in the DMZ. The host where the Central AE and RWB are and all the other SAP PI components are, has all being defined with FQDN.
However once in the RWB and the Additional AE was chosen and you click on the Monitor Channel button the  browser is directed to hostname not FQ. If you one open a new browser session and input the correct FQDN and the rest of the path to for channel monitoring then one can get there. This however requires an additional step and there should be a more elegant way to do it via the SLD I sure, but not sure how.
Any further assistance will be appreciated.
Regards
Willie Hugo

Similar Messages

  • Communication Channel Monitoring not showing up Communication  Channels

    Hi All,
    PI 7.1 : I  have created Communication Channel using File Adapter in ID and activated it. Adapter engine is Central Adapter Engine. But in Runtime Workbench I am not able to see communication channels created under Component Monitoring -> Adapter Engine -> Communication channel Monitoring. Please let me know what is the problem.
    And in ID I am getting below warning message for that Communication Channel.
    Message:  Unable to Check Whether Communication Channel is compatible with selected Adapter Engine since version information for  Adapter Engine is missing in SLD.
    Any idea? I appreciate your  quick help.
    Thanks,
    Carl

    Hi Abhishek,
    I have selected inID ,  File dapater software component  SAP BASIS 7.11 name space http://sap.com/xi/XI/System, adapter "file " is in that name space in ESR. In ESR there is only one BASIS Software Component SAP BASIS 7.11.
    Thanks,
    Carl

  • File picked up by sender channel but not seen in CC monitoring nor in moni

    Dear All,
    It is a file to JDBC scenario where the sender communication channel picks up a file and sends it to several receivers interfaces ( 1 jdbc receiver channel). The file gets picked up by sender communication channel, but problem is that it does not get traced in communication channel monitoring, not even in message monitoring in RWB and SXMB_MONI. Thus no file processing. Sometimes this does not happen and the file gets traced in either of the monitoring tools. Please help as to why would this happen.
    The scenario works correctly at times. its configured correctly. Please guide.
    Thanks & Regards,
    Priyanka Salvi

    Hi,
    Thanks. No, archiving faulty source files functionaly was not used earlied.
    I enabled it by giving a path in the FTP server itself, but no files were placed there in the same case.
    Please give me some examples of OS commands.
    The file is picked up but it seems it is unable to read/forward for further processing.
    This is because after the file is picked up, no messages are found with the outbound interface as well in message monitoring.
    I am manually placing the file at the required path and the procsessing mode in CC is delete.
    The receiver determination and all other configurations are correct.
    I had tried by creating a new sender CC and deactiving the earlied one. Using this files were picked up and processed for few days and now again the same problem.

  • Process not visible in the Communication Channel Monitor

    Hi there
    I have a scenario where I create multiple text files with my message mapping. First I created the scenario with a single file and tested it. It worked so then I changed the Interface Determination to Enhanced and the necessary occurrences to unbounded in my IM and MM. Now if I execute the scenario it shows a successful status in the SXMB_MONI but does not create the flat file. If I go to my Communication Channel Monitor it does not show it there so it did not reach it. Is there some other ting I needed to change for this multiple file scenario?
    Thanks,
    Jan

    Hi again
    I sorted out the issue but now I'm getting something weird. In my source Message Mapping I have:
    Destination
    --Name (0-Unbounded)
    Payload
    --Details (0-Unbounded)
    And my Target mapping I have
    Main_Structure (0-Unbounded)
    --FileDetails (0-1)
    So the Destination determines the number of files and the payload goes to the File Details.
    This does not work for some reason but if I change my mapping to a fixed number of files it works. For example: If I create a UDF that creates 2 arrays and map it to my Main_Structure it creates 2 files but it I map my Destination node with X amount of lines to my Main_Structure It shows fine in SXMB but does not show at all in the component monitor for the receiver CC and in my message monitor it shows "On Hold"

  • Communication channel not present in Communication channel monitoring

    Hi All,
    We have the communication channel in Integration builder and it is active state. but we are not able to see it in C.C monitoring. and we are not sure whether the channels are started.
    how can we check whether the channels are started?
    and why the communication channel is not visible in C.C monitoring.
    It works fine in DEV and QA. but we are facing this issue in PRD

    Hi Ravi,
    in the cache connectivity test, all the components are in GREEN color (Enterprise Service Repository, Integration directory, Integration server - ABAP, , mapping runtime on central adapter engine, adapter engine, mapping runtime) . Only central adapter engine is in yellow color and the message says:
    Apr 19, 2010 6:16:28 AM - Cache notification from Integration Directory received successfully
    Attempt to fetch cache data from Integration Directory not yet started or still in process.
    Restarting the server also did not work.

  • Communication channel  monitoring did not record the processing detail

    Hi,
    I have a proxy-to-file scenario. Usually, I can see the processing details for the receiving file communication channel in Communication channel  monitoring with the Message ID and Explanation. And if I click the Message ID, it will give me processing steps in Audit Log. However, I don't see this log for last night's run. In SXMB_MONI, it shows me 2 messages were successfully sent out. The second message should be appended to the first message in receiver file. But the receiver side only got the first message data. Is there any way I can find out why the second message did not reach to the receiver?
    Thanks in advanced!
    Meiying

    Hi
    Try opening directly
    tools->Internet Options->Advance, uncheck show HTTP friendly error messages under Browsing, then try
    http://<host>:<port>/mdt/channelmonitorservlet
    You need the authorizations of user group SAP_XI_ADMINISTRATOR with the role modify.
    also refer
    No "Adapter monitoring" in runtime workbench

  • Communication Channels do not appear in the monitor

    I have just created a sender and receiver file adapter and activated them. I tested them in a process by dropping a file into the sender directory with a 10 second poll interval. The file is not being processed.
    If I check the corresponding Integration Server Adapter Engine status, there is a green light, BUT When I select the Communication Channel Monitoring button, there are no channels!
    Also, although I have created parties that use these channels, they also do not appear in the filter drop down list.
    Is there some reason why these channels are not appearing?
    Just for clarification; this is on a new XI installation.
    Kind Regards,
    Tony.

    Hi,
    import SAP basis software component into repository
    as per question:
    3. I can't see my adapters in the adater monitoring after the import of a new SP
    on XI FAQ
    for PI 7.0 - sap basis 7.0 for XI 3.0 sap basis 6.40
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • Comm Channels are not seen in the Communication Channel Monitoring in RWB

    Hello All,
    I am facing a strange Problem. In the RWB i am not able to see the Comm Channels that i have configured in the Integration Directory. In the Adapter Monitoring also I am not able to see the Adapters with Green Status.
    I am on PI 7.0 and SP9. For a simple IDOC to File Scenario, the IDOC is getting sent but the File is not getting written. I have to monitor it for this. As the Comm Channels are not showing so I am not able to Montitor.
    Can anyone please suggest me how to do this montoring and how can I see the Comm Channels that I have created.
    Thanks in Anticipation
    Best Regards
    Chakra and Somnath

    Hi,
    1. Check created the Busieness system to identify your XI System.
      Role of Business system : Integration Server
      Pipleline : http://<hostname>:<ICM Port>/sap/xi/engine?type=entry. 
    2.  In XI Tcode : SXMB_ADM
      Role of Business system : Integration Server
      Pipleline : http://<hostname>:<ICM Port>/sap/xi/engine?type=entry.
    3. Go to SXMB_ADM
       Execute Integration Engine and Configuration
       Click on Check button check the SLD working fine or not.
    Regards,
    Venu.

  • Channels not monitorable in the Communication Channel Monitor / RWB

    Hi,
    Back on XI after a long break… &#9786;
    I am facing an issue with our in-house JCA adapter used in XI scenarios. When trying to monitor the channels using our adapter from the Communication Channel Monitor in RWB, I have the following:
        Status: NA
        Short Log: No adapter registered for this channel
    The adapter is deployed and the integration scenarios using it work perfectly:
      - sda package deployed through the SDM
      - the metadata defined in the Design
      - a valid and working configuration involving the scenario is defined
    The messages are going through and are monitorable in both SXMB_MONI and RWB...
    All other channels using system adapters (File, RFC, SOAP…) do display a status (as a color icon) and a Short Log… and they can be administered (start/stop) using the enabled buttons when selected…
    From the Adapter Monitor page, our adapter has a green status, and all the channels configured to use it display the status, Name and Text information...
    I have no idea what could be the issue… should the adapter implement a special interface to be monitored from the RWB, is it a configuration issue, permissions issue???
    I saw 2 posts with this error message but they did not help me to figure out where the issue is …
    Thanks for your help,
    Adalbert
    Edited by: Adalbert Wysocki on Apr 29, 2008 6:52 AM

    Hi Gouri,
    Thanks for your response, I will try would suggestion for testing... but
    I am wondering why the namespace has to be http://sap.com/xi/XI/sample ???
    It sounds weird that this namespace has to be fixed... as the purpose of a namespace is to create a isolation/container for names... so it needs to be customizable...
    I did not see anything in the Adapter Development guides related to this kind of constraints...
    Thanks,
    Adalbert

  • The message is not reaching the outgoing communication channel

    hi forum help..............
    i have a IDOC-XI--JDBC scenario...
    my xi receives an idoc from a sap ecc.....does a simple mapping to a jdbc structuuure and then writes to a databse....
    it was working fine..... but now i had to change the JDBC adapter configuration..means in the integration builder(configuration).. i changed the name of my database server.....
    now after making that change ....... the message is not reaching the outgoing communication channel....
    i cant see any error in the sxmb_moni....
    but there is no log for the message processing in the communication channel in the RWB............

    hi,
    Is the Database is running on the same server  and the same tables and all are existed with same structure.
    Database name is changed then you would have to check all . and after changes , did you activated ?
    If every thing is correct, then refresh Cache.
    For cache related see the below links
    /people/sravya.talanki2/blog/2005/12/02/sxicache--ripped-off - SXI_CACHE - Ripped Off
    XI Runtime cache error: Cache contents are obsolete
    Cache Refresh - SAI_CACHE_REFRESH
    /people/sravya.talanki2/blog/2005/11/03/cache-refresh-errors--new-phenomena
    Regards
    Chilla

  • Comm channel not available in RWB comm channel monitoring

    Hi All,
              I've gone through this(Comm channel missing in comm channel monitoring) unanwered forum. I've facing the same issue.
    In my ID, I created XI receiver adapter comm. channel. And data is flowing successfully to the receiver side through this Comm. channel
    I'm aware that XI adapter in ID is used to send data via Proxy.
    But why i'm not see that in the Comm. channel monitoring in RWB. If anyone has documentation please let me know.
    Thanks.

    Hi ,
              The XI adapter resides in Integration engine thus you cannot see it in RWB. RWB shows comm channels which are in adapter engine. The simple proof is that you cannot enhance this adapter with your own modules on the Module tab page in the module processor.  Here is the link to documentation
    http://help.sap.com/saphelp_nw04/helpdata/en/f4/0a1640a991c742e10000000a1550b0/content.htm
    regards
    Anupam

  • XI Adapter not visible in Comm Channel Monitoring ?

    Hi friends ,
    I am trying a proxy scenario in Discovery System V3 .But when we create XI receiver adapter we cannot see the status of that channel in communication channel monitoring .
    What could be the reason ? Any input will be appreciated
    Thanks.,
    V.Rangarajan

    Hi Vinod ,
    We are using SP12 .
    And also one more reason that u were unable to see XI adapter is that u might not have activated that adapter in your admin settings.
           I saw in JEE Admin . This Adapter is in Running mode .  the parameters are
      xiadapter.isconfig.username  PIAFUSER
         1. May i change it to PISUPER and give password ?
         2. http://localhost:50080/sap/xi/engine?type=entry   as   xiadapter.isconfig.url 
             but in CC monitoring  , IE Components  Test message tab i can see the url as   http://iwdfvm2160.wdf.sap.corp:51080/sap/xi/engine?type=entry
               will that port 50080 and 51080 will cause the problem ?
    Thanks.,
    V.Rangarajan

  • IDoc adapters not in "communication channel monitoring"?

    Hi,
    I've modified some information that the receiver IDoc adapter is using (the logical system ID). But after I refreshed all the caches the change is not updated when I send an IDoc to R/3.
    When this kind of problem happens with RFC adapter you just have to stop and restart the communication channel in communication channel monitoring. But IDoc adapter is not here... so, how can I restart the IDoc communication channel?

    Hi,
    IDoc adapter doesnt reside on Adapter Engine, its part of ABAP stack, because of this you cannt find it in RWB-Communication channel monitoring...
    Try refreshing the cache:
    Transaction: sxi_cache
    CPACache refresh using the below url:
    http://<server:port>/CPACache/refresh?mode = full
    to get the changes affected.
    Regards,
    Sreenivas.

  • Not able to open Communication Channel Monitoring

    Hello All,
        I am not able to open communication Channel Monitoring in Runtime workbench under Component Monitoring. When i am click on Communication Channel Monitoring button following error was thrown. Can anybody suggest me, How to resolve this problem.
    java.lang.NullPointerException
         at com.sapportals.htmlb.table.TableView.getColumns(TableView.java:332)
         at com.sapportals.htmlb.table.TableView.getColumn(TableView.java:350)
         at com.sap.aii.mdt.amt.channelmonitoring.ChannelListTableView.setTableSortingStuff(ChannelListTableView.java:556)
         at com.sap.aii.mdt.amt.channelmonitoring.ChannelListTableView.setSingleSelectTable(ChannelListTableView.java:393)
         at jsp_channelmonitoring1213186378553._jspService(jsp_channelmonitoring1213186378553.java:257)
         at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
         at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:566)
         at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:190)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
         at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:68)
         at com.sapportals.htmlb.page.PageProcessorServlet.doGet(PageProcessorServlet.java:29)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Thanks&Regards,
    VenkatK.

    Hi,
    The error could be because
    1) The URL referenced from RWB (Communictaion Channel) is incorrect.
            Try accesing the link directly http://HOST:JAVAPORT/mdt/channelmonitorservlet
    If you are able to open the window with out nay error, it means you url referenced from SLD is wrong. Correct your SLD and update the cache.
    2) If you are not able to access above URL, it means the java service is not running to accept your request, check in visual admin if any of the services are stopped. Try restarting the same.
    Regards,
    KNS Kumar

  • New channels in integration directory not displayed in communication channel monitoring

    Hi all,
    We configured recently new communication channels in the intgration directory (PI 7.0), and all changes were activated. But when we check in the communication channel monitoring, we cann't see them.
    Any idea please.
    Many thanks in advance

    Hi,
    Might be issue with cache.
    can you validate as per below thread?
    Communication channel not showing in CC monitoring
    Regards,
    muni.

Maybe you are looking for