DE - Direct Insurance function DDV - DDVA errors
Hi everybody,
I have one employee not subject to tax (expat) with an Direct Insurance (IT0026) to be paid in November.
I think I had an error generated by the DDV function:
The function is going to generate a /515 Lump-Sum Ch wich generated later on in the schema church tax.
But my employee is not taxable (IT0012 correctly configured)
Does some one get this one or do you think I have to open an OSS notes ?
Thanks a lot
KR
Greg
PS: Note that I don't have any tax calculation exept the month of direct insurance. Moreover WT is really generated during the DDV function
Edited by: GREGORY DAHAN on Mar 9, 2011 1:25 PM
Hi Greg,
please take a look at the German Documentation of the field T5D0P-PKIST. In Germany you can choose between 2 ways of calculating this church tax. What you describe could be correct.
Greetings
Chris
BTW: You could write german in this forum... Hinweis zur Verwendung: Forum Abrechnung Deutschland, u00D6sterreich, Schweiz
Edited by: Christian Becker on Mar 9, 2011 2:24 PM
Similar Messages
-
Planning function ended with errors
Hi Folks,
Issue: While Executing The Planning Sequnce it is througing me Planning Function Ended with Errors.
I have one existing Planning Sequence which contain the Filter and Planning Copy Function. And also Variable input ( two variables 1 is Profict Center and 2nd one is Fiscal Year)
First i was tried to execute the Planning Sequece it througing me error message saying as in below:-
Values entered are invalid; check these values again
Variables contain invalid values.
Specify a value for variable Fiscal Year (Single Value Entry, Required)
You have to enter variables before you execute
Then i have entered Fiscal year value in the Planning Sequece>Variable Input>select the Fiscal Year Variable>Input help>selected the 2008-->ok. Now then Fiscal year variable is showing 2008.
And then i was executed once again here Planning Sequnce it is througing me Planning Function Ended with Errors.
Here is cross checked Filter area associated Variables( two variables 1 is Profict Center and 2nd one is Fiscal Year).
1.Profit Center Variable: Containing the default value is 1000
2.Fiscal Year Variable : Does not maintained any default values.
Can any one provide your vHi Venkat,
Please execute the planning function with Execution with Trace option.
Verify the planning function particularly from Values.
Also some simple tricks:
1. Try with some other values.eg. FisYear 2007. ( Check in database)
2. Save the variant in variable input panel & then execute.
Hope it helps,
Shamkant -
try to create an installer in Labview 8.6. The build fail and I got this message.
CDK_CreateNewWizard_Invoke.vi.ProxyCaller >> CDK_CreateNewWizard_Invoke.vi >> CDK_InstallerConfiguration_Editor.vi
>> CDK_Build_Invoke.vi >> CDK_Engine_Main.vi >> CDK_Engine_Build.vi >> NI_MDF.lvlib:MDFBuildDist_Build.vi
Loading product deployment information
Loading product deployment information
Loading product deployment information
Loading product deployment information
Adding files to installer
Done adding files
Preparing to build deployment
Copying products from distributions
Copying distribution 'NI LabVIEW 8.6.1 Datalogging and Supervisory Control Module' from:
D:\software\application\LabView\NI.LABVIEW\NI-Labview 8.6.1 DSC Module\ to: C:\Documents and Settings\Lidaoling\桌面
\Builds\generate waveform\My Installer\
Building deployment
Copying setup files
Setting merged database information
Setting product information
Setting developer part information
Starting final build
Validating...
Copying files...
Updating files...
Creating merged database...
*** Error: Windows SDK function returned an error. (Error code -12)
*** End Error Report
Done building deploymentSolution
-
Direct Path SQL Loader get error ORA-01555
Hi All,
11.2.0.1 DB
Has anyone here used sqlloader direct path option?
Is there special setting I need for the Undo TS?
I am testing my sqlloader direct path but I got error : ORA-01555: snapshot too old: rollback segment number 10 with name "_SYSSMU10$" too small
I am only testing 100 records and I shutdown the database. And I am only the one using it. :(
Does dropping the Undo TS and creating new one help resolve my issue?
Thanks a lot,
Kinz
Edited by: KinsaKaUy? on 07-Nov-2012 03:33I drop my UNDOTS1 and recreate it to resolve if there are framentation in the TS itself , but to no avail, the same error persist :(
Record 1: Rejected - Error on table EMPLOYEE.
ORA-00604: error occurred at recursive SQL level 1
ORA-01555: snapshot too old: rollback segment number with name "" too small
SYSTEM ONLINE
_SYSSMU87_2780657351$ ONLINE
_SYSSMU88_120427686$ ONLINE
_SYSSMU89_1588874193$ ONLINE
_SYSSMU90_2571046414$ ONLINE
_SYSSMU91_1803654754$ ONLINE
_SYSSMU92_2477693864$ ONLINE
_SYSSMU93_1908993412$ ONLINE
_SYSSMU94_985867735$ ONLINE
_SYSSMU95_4165893730$ ONLINE
_SYSSMU96_1502488804$ ONLINE
_SYSSMU97_3533816217$ ONLINE
_SYSSMU98_3954380786$ ONLINE
_SYSSMU99_1314687851$ ONLINE
_SYSSMU100_3542148152$ ONLINE
_SYSSMU101_1249002234$ ONLINE
_SYSSMU102_1520886654$ ONLINE
_SYSSMU103_2785416951$ ONLINE
_SYSSMU104_1530388055$ ONLINE
_SYSSMU105_1995830672$ ONLINE
_SYSSMU106_4584952$ ONLINE
_SYSSMU107_1177768351$ ONLINE
_SYSSMU108_3896986945$ ONLINE
_SYSSMU109_2576315174$ ONLINE
_SYSSMU110_2786589320$ ONLINE
_SYSSMU111_1195961439$ ONLINE
_SYSSMU112_2612035115$ ONLINE
_SYSSMU113_1697198479$ ONLINE
_SYSSMU114_3939726644$ ONLINE
_SYSSMU115_467875145$ ONLINE
_SYSSMU116_2826382876$ ONLINE
_SYSSMU117_3650068864$ ONLINE
_SYSSMU118_92260707$ ONLINE
_SYSSMU119_2322108460$ ONLINE
_SYSSMU120_2583709550$ ONLINE
_SYSSMU121_1279604730$ ONLINE
_SYSSMU122_2128414833$ ONLINE
_SYSSMU123_1365970622$ ONLINE
_SYSSMU124_1855929876$ ONLINE
_SYSSMU125_1511578664$ ONLINE
_SYSSMU126_3219352797$ ONLINE
_SYSSMU127_2412556110$ ONLINE
_SYSSMU128_2102547636$ ONLINE
_SYSSMU129_447164998$ ONLINE
_SYSSMU130_3851265156$ ONLINE
_SYSSMU131_3046352603$ ONLINE
_SYSSMU132_2987406815$ ONLINE
_SYSSMU133_983809304$ ONLINE
_SYSSMU134_928979873$ ONLINE
_SYSSMU135_3248183819$ ONLINE
_SYSSMU136_811112856$ ONLINE
_SYSSMU137_1958351427$ ONLINE
_SYSSMU138_2222543$ ONLINE
_SYSSMU139_3962620689$ ONLINE
_SYSSMU140_2711665463$ ONLINE
_SYSSMU141_3724825495$ ONLINE
_SYSSMU142_1818253355$ ONLINE
_SYSSMU143_1370485269$ ONLINE
_SYSSMU144_2442636386$ ONLINE
59 rows selected.
SQL>Is there something missing in my sqlloader parameter? but if I use "ordinary" path it will load successfully. But not with "direct" path :( Any ideas please -
ORA 28817 PLSQL function returned an error . when Access instance apex 4 2
Hello,
I have just upgraded from apex 4.1 to apex 4.2. Everything is fine except for this error that I get when I try to access Instance Setting on the Admin App (localhost/apex/apex_admin)
ORA-28817: PL/SQL function returned an errorWhat could be the problem ?? How can we fix it ..
I am working on Win server 2012 machine .. apex 4.2 with apex listener 2 deployed on Glassfish 3.1.2.
Best Regards,
FatehHello Fateh,
we are already aware of that problem, although it is not yet present on our Known Issues webpage. The reason for this error is that the new installation overwrites an instance-wide encryption key. Values in the instance preferences that were encrypted with the old value (the SMTP password and the wallet password) are invalid after the upgrade and decryption causes this error. As a work around, you can use the apex_instance_admin package to overwrite the invalid passwords.
The following code shows how decryption throws ORA-28817:
SYS@a411> select apex_instance_admin.get_parameter('SMTP_PASSWORD') from dual;
select apex_instance_admin.get_parameter('SMTP_PASSWORD') from dual
ERROR at line 1:
ORA-28817: PL/SQL function returned an error.
ORA-06512: at "SYS.DBMS_CRYPTO_FFI", line 67
ORA-06512: at "SYS.DBMS_CRYPTO", line 44
ORA-06512: at "APEX_040200.WWV_FLOW_CRYPTO", line 89
ORA-06512: at "APEX_040200.WWV_FLOW_INSTANCE_ADMIN", line 239You can fix this by entering new passwords:
SYS@a411> exec apex_instance_admin.set_parameter('SMTP_PASSWORD','my smtp password');
PL/SQL procedure successfully completed.
SYS@a411> exec apex_instance_admin.set_parameter('WALLET_PWD','my wallet password');
PL/SQL procedure successfully completed.
SYS@a411> select apex_instance_admin.get_parameter('SMTP_PASSWORD') from dual;
APEX_INSTANCE_ADMIN.GET_PARAMETER('SMTP_PASSWORD')
my smtp password
1 row selected.Regards,
Christian -
Qty update not active, function not possible error in MIGO
Dear all,
User faces , u201Cqty update not active, function not possibleu201D error in MIGO.
The receipt is for an STO and the material is split valuated. Qty and value updation is active and already similar receipt has been done for many qty.
Throw some light on this
Regards,
AntonyHi Antony,
Was the material type for the material changed recently? Pls. check the same.
If the qty update is active for the receiving plant & material type, then there should not be any issue.
Regards
Prabhu S -
Error: Windows SDK function returned an error. (Error code -12)
I receive this error when attempting to build an installer for my Labview application.
CDK_Item_OnDoProperties.vi.ProxyCaller >> CDK_Item_OnDoProperties.vi >> CDK_InstallerConfiguration_Editor.vi >> CDK_Build_Invoke.vi >> CDK_Engine_Main.vi >> CDK_Engine_Build.vi >> NI_MDF.lvlib:MDFDistCopyList_CopyItem.vi
Loading product deployment information
Loading product deployment information
Adding files to installer
Done adding files
Preparing to build deployment
Copying products from distributions
Copying distribution 'NI-DAQ 8.0.1' from: D:\ to: C:\DARTS\ATS_TE_Project\DARTS_NI-DAQ_HP3561A_Dynamic_Signal_Analyzer\Installer\
*** Error: Windows SDK function returned an error. (Error code -12)
The system cannot find the file specified.
*** End Error Report
Done building deploymentI was able to get the install builder to build an installer for my
Application today 6/6/07. These are the steps I performed along with good amounts of trail and error.
1) I attempted to re-install the NI-DAQ 8.0.1 drivers however I didn't
perform this because it said it remove NI products which I didn't want
removed. But it didn't tell me what it would remove.
2) Instead, I copied the entire NI-DAQ 8.0.1 distribution to a directory on my hard drive.
3) I set the NI-DAQ 8.3 install build type to FULL in install builder.
4) In install builder when prompted for the components from the NI-DAQ
8.0.1 I browsed to the NI-DAQ 8.0.1 directory on the hard drive and
also un-checked the cache box.
5) It through another error this time saying it couldn't find
C:\NI-DAQ8_0_1\8.0.1\Products\LabVIEW_Broker71\LVBroker71Deu.mst (and,
LVBroker71Fra.mst, LVBroker71jpn.mst, LVBroker1071Deu,
LVBroker1071Fra.mst, LVBroker1071jpn.mst). It also could not find the
LVBroker1071 files in the
C:\NI-DAQ8_0_1\8.0.1\Products\LabVIEW_Broker1071 directory either.
6) I performed a search for these files and they did not exist in the
NI-DAQ 8.0.1 directory on my hard drive or the 8.0.1 CD I have.
7) These files DID exist in my NI-DAQ 8.3 directory located on my hard drive.
8) I copied the LVBrokerxxxx.mst (listed in 5 above) files from the
NI-DAQ 8.3 directory on my hard drive to the corresponding location in
the NI-8.0.1 directory on my hard drive.
9) This time when I rebuilt the installer for my application the build was successful.
Additional information:
When I built my application I only selected English for language
support. In Install builder in "Dialog Information I also selected
English.
I haven't attempted to try the installer on my target yet so I'm not
quite sure how successful I really was but at least I have a installer.
Let me know if this also works for you.
Rich... -
Getting Virtual Function Call runtime error R6025 from iexplore.exe
Hi all,
I am getting an virtual function call runtime error from iexplore.exe. The IE will then crash. I have checked the log in java console. It shows
basic: Removed progress listener: sun.plugin.util.GrayBoxPainter@4607b5
basic: Finding information ...
basic: Releasing classloader: sun.plugin.ClassLoaderInfo@314585, refcount=3
basic: Done ...
basic: Joining applet thread ...
basic: Destroying applet ...
basic: Disposing applet ...
basic: Quiting applet ...
basic: Joined applet thread ...
basic: Unregistered modality listener
--> basic: Stopping applet ...
--> basic: Stopping applet ...
basic: Removed progress listener: sun.plugin.util.GrayBoxPainter@cbb7db
basic: Finding information ...
basic: Releasing classloader: sun.plugin.ClassLoaderInfo@314585, refcount=2
basic: Done ...
basic: Joining applet thread ...
basic: Destroying applet ...
basic: Disposing applet ...
basic: Quiting applet ...
basic: Joined applet thread ...
basic: Unregistered modality listener
I have implemented the stop() in all the applet classes. However, I do not know where this stop() called?
Also, from the java debugger, it always stops and shows:
Exception occurred: java.lang.ThreadDeath (uncaught)"thread=TimerQueue", javax.s
wing.TimerQueue.run(), line=-1 bci=63
TimerQueue[1] cont
>
Exception occurred: java.lang.Exception (uncaught)"thread=main", sun.plugin.com.
JavaClass.getIdForName(), line=-1 bci=72
main[1] cont
>
Exception occurred: java.lang.Exception (uncaught)"thread=main", sun.plugin.com.
JavaClass.getIdForName(), line=-1 bci=72
main[1] cont
>
Exception occurred: java.lang.Exception (uncaught)"thread=main", sun.plugin.com.
JavaClass.getIdForName(), line=-1 bci=72
main[1] cont
>What version of 5.0 are you running? There were some problems new in 5.0 seen mainly with the Java Plug-In and other apps which embed the JVM which were fixed in 5.0u6.
-
FUNCTION NOT IMPLEMENTED error when calling C# method from SAP, why?
Hi,
I've build a server stub in order to get SAP calling my own methods that exist in the C# world, for that I developed several methods in a class that extends SAPServer and then implemented them...
I added the special custom properties needed (Abap Name, length, etc) to the function and to its parameters, I've made the ABAP code required to call it...
I've checked, every parameters that I place in ABAP (importing, exporting and tables) are also defined in C# (its 53 parameters) with the same name (in C# they are in capital letters and in a diferent order but I tried this before and it didn't matter)...
The name of the function is the same...
How can I get the 'FUNCTION NOT IMPLEMENT' error in SAP?
What's going wrong when I get this error?
Can anyone tell me?
Is there any place in this site that has a error description and possible reasons?
When I get a parameter wrong I get a different error (I tried to make smaller functions and they work fine).
Thanks for the help,
Nuno Felino
Message was edited by: Nuno FelinoHi,
I'll explain what I'm doing:
- we have a set of services made in a C and VB that are available using an API in C#, these services must be available to SAP. So I have a program that will see what parameters the API service requires and makes a proxy so that SAP can call these services.
To do this I must map SAP types with C#, build the function signature and then implement it. So I cannot use the wizard to do this
Now, back to the question, what kind of customer attributes I got wrong to get that exception? The most logic is the AbapName of the function but they are equal (the one called in SAP and the one in the customer attributes of the function)...
Thanks for the answer, can you give me any more hint? -
Direct-X not found - Installshield error i-001
.Direct-X not found - Installshield error i-00? I've been having lots of issues installing software that came with my addon I/O bay (fitted to an Extreme Gamer Fatalty Pro), such as i-00 errors. I've managed to resolve some issues but am stuck with the following whilst trying to install Entertainment Center.
Installshield runs, installs the software and enters the registry values and then fails with a i-00 error. I've followed the instructions for Creative solution 456 - http://support.creative.com/kb/showarticle.aspx?sid=456?that deals with this error (and have solved a number of similar issues this way). However in this instance the install.log is showing that Direct-X is not found. Direct-X 9.0c is installed on the system, 3d games run fine and DxDiag shows no errors. Direct-X won't reinstall as it detects that it's already installed. Does anyone have a solution to this issue please?
I'm running Windows XP sp3.don't use the name property. that is a string:
targets=(obj.dropTarget.parent)
trace(targets);
trace(targets.x) -
Hi SAP Experts,
The New contact person created in CRM 4.0 and added to BP under relationships , this contact is not replicated to ERP and giving an error as "Person no. not found - function module CONTACT_PARTNER_GET_ADDR3_KEY error
" in the BDOC.
Can anyone through some light on this .
Thanks in advance.
With Best Regards
Suchhihello, you mentioned that the contact has a relationship with a person right?
Is the person also exist in ERP?
As the middleware return the error CONTACT_PARTNER_GET_ADDR3_KEY , you can try to debug the BDOC to find out the reason.
You can set the breakpoint in the function , trigger the BP update, wait for system call it. But debug BDOC need some skill.
For the details of how to debug BDOC, you can find the related SAP Notes in SAP OSS. -
Pass TestStand error type directly into function parameter
Hi,
I am using TestStand 4 and Labwindows CVI 8.5.
I wonder if it is possible to pass Standard Step error type into CVI function parameters.
I think it would be more simple to pass one parameter instead of passing Error code, Error occurred state and Error message into function prototype.
I tried to use tsErrorDataType struct defined into tsutil.h into my function prototype.
In TestStand, I pass Step error type into function parameter but it does not work.
TestStand displays an error meaning parameters does not match function prototype.
Thank you for your help.Hi Tartempion,
In order to pass the TestStand Error Container as one parameter to a function in a CVI DLL, you must use a struct that is typedef'ed and create an .fp file that is included as a type library for the DLL. When you create a .fp file to add to a DLL, the DLL will not build unless all structs/enums are typedef'ed. Thus, I wouldn't advise using the tsutil.h because you would have to go through and typedef every single struct and enum in the header file.
Instead, you can simply create a typedef'ed struct in your projects header file and create an .fp file with the struct specified as a data type. Then in TestStand, when you call the function you would need to ensure that the parameter is of Category "C Struct", and type "Error". The attached zip file contains a CVI 8.5 project that demonstrates this along with a TestStand 4.0 sequence file that demonstrates how to pass the parameter to the function by reference. In case you run into trouble creating the .fp file please refer to the following KnowledgeBase. The instructions are for enums but easily correspond to structs as well:
TestStand and LabWindows/CVI Enumeration Data Types
Hope this helps!
Manooch H.
National Instruments
Attachments:
PassTSError.zip 19 KB -
No Functional Area Found Error while creating service data in me22n
Hello,
While creating service data for a purchase order in ME22n I am getting error like " No functional area found" .
Please tell me how to maintain the Functional area for a particular GL account
In the help i can found that we can find the functional area "The functional area can be determined either using the cost element, the account assignment object (such as the cost center or order)"
How we can determine this please through some light on this statement.
Thanks
Pradeep
Moderator message: not directly related to ABAP development, please post again in the appropriate functional forum.
locked by: Thomas Zloch on Oct 15, 2010 9:55 AMHello Madhav,
You have to maintain your 'business transaction profile' (SPRO->CRM->IC Web->Business Transaction->Define bus. trans. prof.) in the customizing and assign that profile to your IC WebClient profile (the one you assigned in the org. model)
In the business transaction profile you must make sure that at least one transaction type (e.g. ZSRV) is assigned as 'Dependent business transaction' and that entry is flagged as 'Service'.
Also make sure that that transaction type (ZSRV) has leading business transaction category 'Service process' (BUS2000116).
This should solve your problem!
Kind regards,
Joost -
I used to print all my BioBench data by first exporting them to Excel and then print from there. Recently I need to print some of the screen shots and some data directly from array analysis, but when I click on the "print" buttons, the "Error, the printer is not set up correctly" message occurs. The only thing I can print from BB without this error is the report printing function. I have a postcript printer and I have set the postscript option to be "true"... Thanks !
This problem is a result of a limitation in Windows 9x regarding the size of an image that you can send to the printer. The problem does not occur on Windows 2000/NT. This problem appeared with the increased color options of LabVIEW 6.0 on which the BB1.2 is based.Although it is not immediately obvious, your video driver and settings play a role in printing.
1. Try adjusting the color palette your driver uses (i.e., 256 color, high olor, true color). The error may occur only in one of these modes. Also, change the resolution (number of pixels) to represent the Screen Area; e.g., change from a 1024 x 768 display to an 800 x 600 pixel display.
2.Certain video drivers also support "acceleration" modes. Using a non-accelerated mode often eliminates the error. For
Windows 95/98, right-click on your My Computer icon and select "Properties" from the pop-up
menu. On the Performance tab, click the Graphics button and change the Hardware Acceleration (e.g., if it is set to "Full", lower the setting a notch or two); for Windows 2000/NT, right-click on your Desktop and select "Properties" from the pop-up menu. On the Settings tab, click the Advanced button and go to
Troubleshooting.
3.In Windows, the standard VGA driver provided by the operating system is very stable. Try using this driver in place of the specific one written for your video hardware. If the error is eliminated, there is likely a problem with your vendor-provided video driver.
4.These errors are most often fixed with the latest
video/printer driver. Be sure to contact your hardware manufacturer and install the latest driver. An easy way to determine if your error is "driver-related" is to move your code to another machine (and hopefully a different set of drivers) and see if th
e error persists. If the problem is printer related, try another printer.
5.Make sure there are at least 100M avalible space in your C: drive. If not, set the virtual memory to the other drive which has larger available space. -
Hi,
I have a TestStand GUI developped in C#. Now, TestStand has some Labview modules that needs to send UIMessages to the GUI (It is too deep in Labview code to bring it back to TestStand to send the UIMessage).
When I am using the Labview Full development version 8.6.1, everything is fine, I can see my messages. Now, when I switch to Labview run-time 8.6.1, the invoke node PostUIMessageEx gives me an error: Incorrect Function (error 1).
I have been trying rebooting PC/TestStand/Labview without success. Is there anything I am missing?
Thanks
Alex
Solved!
Go to Solution.Hi Manooch_H,
Changing to synchronous did not change anything. In fact, being asynchronous was a previous test, and I forgot to change it...
I have been trying few experiments, and here are the results:
1) I decided to change strategy. The Labview code would change a global variable. And in my PostStep callback, when I see that my global variable is deifferent from "", and send it to the GUI using a UIMessage, and I put it back to "". I know, I know, it is not optimal. But this way, the UIMessage is from TestStand to c#, and not from Labview to c# using teststand api... But, I ran into a similar problem using the SetValString in Labview to change my global variable.
2) What I do, is that I keep my Engine reference in a functional global. I have been trying to use either IEngine or Engine (TestStand.Engine.1) from the NI TestStand API 4.1.1 Version 1.0.
3) When I call my VI directly without using my Engine reference kept in the functional global, it is working. But I noticed that if I call this VI 3 times in a row, the Engine reference is different each time. It does mean that the Engine reference I am keeping in my functional global would be no more valid! So when I am using my functional global, it is not working...
There is something I don't do right. Is there a way to give Labview an Engine reference that would be valid throughout my execution? Or do I need to give back the updated reference each time I want to use the Engine in Labview?
Thanks
Alex
Maybe you are looking for
-
Error while posting material using transaction code MB1C
Hi Experts, While I am trying to post material into warehouse its giving warning message initially as : MAT IS A MISS PART MRP CONTROLLER KNUITZ WILL BE NOTIFIED MESSAGE NO: M7133 Diagnosis Material is a missing part of plant when I am pressing ente
-
PDF to Word Document Conversion Problem
I am trying to convert a 37-page PDF document (less than 100 MB) into a .docx Word document using my paid subscription to Adobe ExportPDF. The program makes the conversion, only into a 1-page document with the following message: "To view the full
-
Day Limit in Change View "Terms of Payment":Details?
What does exactly does the Daylimit field in "Change View " Terms of payment": Details "means? A detail explanation with an EXAMPLE is well appreciated. Thanks for your time
-
How do I cancel the flow of emails from support communities?
How do I cancel the flow of emails from support communities?
-
Online Number not working even after changing priv...
Hello all, I'm having problems with my online number, I can't dial into it - I've changed the privacy settings but no go, I can dial out and the number appears on the receiving phone, Any suggestions ?