De-Facto instructions for Creating Web Templates, PLEASE

Hello All,
I am adept at HTML, and am ok with Java. I have hand coded my entire site. And hand created very intricate web templates to use in Breeze Browser.
Now, trying to fully incorporate LR into my work flow, I am finding it frustrating to find GOOD instructions for creating my own web templates. I have followed several links, read what was said, read forum posts. But to be honest, there just is no good 1 stop source for the busy person to learn how to do this.
I am asking that someone, very knowledgeable in creating web templates, for both PC and MAC, please put together a well outlined post describing every step needed to do this. And then have the forum moderators make the post sticky so that it is easily accessible.
This is very important if LR is going to fit into many working pros current work flows. PLEASE somebody do this.
I will be eternally great full!!!!
Thank you in advance for any kind soul who considers doing this

Hello Paul,
You're not the only one... I know of several people who are waiting for decent documentation of the XML/XSLT mechanisms so that we can create templates for our custom web sites. My own needs happen to be very simple, but frustratingly difficult to achieve (or maybe I'm trying the wrong approach).
All I want is a file called index.txt that contains a title for the gallery and a list of thumbnails and full size images, and then I want the thumbnails and images all in the same directory and named in a specific way (no spaces and 't_' prefixes on the thumbnails). Trivial in BreezebrowserPro, but so far I haven't managed it with LR (mind you my XSLT knowledge is virtually non-existent).
This is the only thing that's holding me up purchasing LR.
Cheers,
Simon

Similar Messages

Security for creating web templates using web application designer

I work for ChevronTexaco as a BW Security Analyst. I have a request to set up roles for web template creation using the Web Application Designer. Where can I get help in setting up the security for these types of roles? My experience is in setting up roles for running and creating queries in BEX. I need to know what additional authorizations will enable web template creation. Setting up a trace in ST01 has been less than helpful since it dumps out tons of RS_COMP tracing that doesn't help me much.
The user wants to be able to create web templates for existing queries in BEX and restrict by rs_comp infocubes/areas/reportid, etc. and to be able to save to restricted role names. Are there new auth groups specific to this type of activity that I need to code for in addition to the basic end user or report builder authorizations?
Any help would be greatly appreciated.
Jeff Ehritt
925 827-6012
ChevronTexaco

Thanks Marc, I'll check it out. My problem was that I was trying to create the role by granting a userid sap_all, sap_new and s.a_system as well as power user auths for a specific application. I set up a trace in ST01 for authorization cking on the ID while one of our BW Central Support people went into Web Designer to create a template and everything else they wanted to do.
The resulting trace spewed out so much stuff from S_RS_comp and comp1 as to be virtually useless since it named scores of different cubes and infoareas that the analyst wasn't even interested in. The results puzzled me and made it extremely difficult to pin down the required authorizations. Usually ST01 can be used as a blueprint to create the role,ie; everything that the user touches is traced but no more than that. Have you seen this before? With just the new role I had set up the user could not save to a role unless I coded the fully qualified role name such as YRH_SENDAT_USER. YRH* would not work.
Thanks,
Jeff Ehritt
ERP COE SAP BW Security

Why use Dreamweaver for create web pages

Hi I am new in Dreamweaver and I want to know why use Dreamweaver for create web pages?

Twitter
http://twitter.com/altweb
Blog
http://alt-web.blogspot.com/
Site
http://alt-web.com/

Using instruction for creating field catalog to archive object "MM_MATNR"

Hi all,
I need a using instruction for creating a new field catalog to archive object "MM_MATNR". I'd like to create a field catalog using some fields of tables mara, makt, mvke and marc.
Thanks for your help!

Hi,
Go to following link;
[Material Master Archiving|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90f75a80-867f-2d10-7aa6-ac164e43e89f?quicklink=index&overridelayout=true]

Fireworks or Illustrator for creating web components

I just want to ask members who use Muse which program they use to create Web Components. For photos I use Photoshop CC, but I am not sure which program to use for web graphics. I know both programs have tools for creating web graphic, and that Fireworks is more designed to create web graphic, but which one is better Fireworks or Illustrator.
I am looking to trying to create some logos and maybe icons for my webpage, and as I am new to these programs I would like so opinion from you the members on which ones your use.
I thankyou in advance for reading this post and any opinions you may have regarding this.

Ultimately I would say photoshop is your best bet. You can do the hard lines, shading and blending for this type of thing fairly easily in photoshop compared to illustrator if you know how. Most web comic artist I know who do their work in color usually use photoshop to produce exactly this type of look. For examples look at Katbox.net/laslindas or 2kinds.com

Launch HTML Editor for creating webi reports - Java sdk

Is there a way to launch HTML editor directly for creating webi reports..I know we can set the preference for HTML report panel in infoview...but thats not the requirement. I have to launch the HTML or Java report panel editor according to the User selection on the fly....its a customized java code for webi reports.
Any help on this is appreciated!
Thanks
Chenthil

Guys will this link work to launch the HTML editor....
desktoplaunch/querywizard/jsp/entry.jsp?skin=skin_standard&docname=&docid=&isNew=true&isModified=&doctoken=we00010000b5d263b7d0a6&repotype=&unvname=&unvid=UnivCUID%3DAZu2kpoiudVOk35pUtr6.qQ%3BUnivName%3DKalvin&unvrepoid=&mode=C&decsep=.&unit=in&lang=en&doctype=wid&viewType=H&isModify=yes

Need instructions for creating T61 XP backup media

Can you direct me to instructions for creating the backup media (DVD preferably) for the existing 4GB backup partition on my T61 running XP? It is intact, and I can boot into it, but I'd sleep a little better if I had the option of booting from external media. I'm aware of the advice to call and purchase this media, but I would prefer to just make it myself, if possible.
Thanks!
Moderator Note; post moved to start new thread, subject edited.

I don't recall the step by step, but there is a menu item in the lenovo section you can use to burn recovery media from within windows. If I'm not mistaken, it can only be used once, however if someone already burned a set you can still restore from the harddrive and after restored you will again be able to burn one copy of recovery media.
However, I'll give you my own personal opinion on this. When you install from this recovery media you'll have an outdated operating system. The T61 recovery disc was made in 2006 or 2007 and after you install it you'll need to install the latest service pack, then you'll probably want to replace all the drivers and all the lenovo apps that are also outdated. You're going to end up replacing nearly everything, plus you're going ot have several redundant copies of all this outdated stuff taking up space. My preferred method is to use a windows setup disc that has the latest drivers and critical updates integrated, then go online and download the latest drivers for your hardware and as much or as little of the lenovo products that you want on your system. You then save an enormous amount of harddrive space and have a computer without all the bloat and it all gets done in a fraction of the time. The last time I installed from a factory restore disc set it took hours, then several hours more to replace everything with updated versions.
ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

Additional Instructions for Creating USB Installation Media

Greeting Everyone,
I have been trying to install archlinux on my Acer c720 chromebook. The instructions have been posted on one of the forums and I have been following them and ran into a bit of a problem. For some mysterious reason using Syslinux as the bootloader (I think I got that right) puts the C720 into reboot immediately. The forums indicate that I should use GRUB instead of Syslinux. Great! That is exactly what I want to do, and here is the problem:
The instructions for creating the USB Flash Installation Media give step by step instructions for getting archlinux.iso and Syslinux on to the USB memory stick - which I followed and succeeded- but no instructions on how to put GRUB on there instead of Syslinux.
Could someone give me instructions on how to do that.
I am following the "Manual Formatting" --- "In Windows" section of the wiki titled "USB Flash Installation Media."
Just so everyone knows this is my first venture into linux world and away from point and click windows world.....

Steef435 wrote:
Those instructions are about the installation(about what you choose to install on your harddisk). So they aren't important yet if you haven't managed to boot up the usb drive. What three images did you try? You should get the image from here:
https://www.archlinux.org/download/
Did you try booting the drive on other machines and how did that go? Did you go through all the instructions described in the wiki(enabling developer mode and enabling legacy boot) and did you get to the boot menu?
Were you able to select the usb drive in the boot menu?
On a side-note, I don't have a Chromebook so I'm not able to confirm the instructions on how to enable developer mode etc.
Yes I used the following images from archlinux.org:
archlinux-2013.10.01-dual.iso
archlinux-2014.01.05-dual.iso
and the third was from a random selection from the drop down menu in LiLi USB creator.
Yes I have followed the instructions from the installation wiki and was able to get the developer mode and to the boot menu on the c720 and able to select USB to boot from.
As I mentioned earlier I had success using the method for creating a USB Installation in the wiki (under "Using manual formatting", "In Windows" https://wiki.archlinux.org/index.php/US … tion_Media ) I was able to get the archlinux splash screen and it tries to install but resets. And I figured out that this happens because following the instructions I end up with archlinux and Syslinux on the USB and I need arclinux and GRUB.
Hence my request for additional instructions for getting archlinux and GRUB onto a USB for installation.
I will try the USB installation created using LiLi on a different computer - it is much older though and I am not sure it has enough memory for it.

How to create transport request for standard web template

hi all
can any one tell me the step by step procedure to create transport request for standard template?
thanks
shalini

Business Content --> Choose & Install the standard web template & then collect the object for transport...Assign a Package & when prompted for Transport Request --> Opt for a new transport request.
Message was edited by:
Jerome

How to set specific URL for broadcasting web templates from WAD

Hi experts,
I have created a sample web template in WAD by using SAP BI standerd query.When I am executing the web template,it is redirecting me to some unintended web portal.I know the correct portal URL.Can anybody tell me where the redirecting portal URL settings are maintained in BI/BEx/WAD??
Regards,
Mandar.

Hi Suman,
Thanks a lot for your valuable reply.
By the navigation you mentioned,I was able to identify where exactly I have to change the URL prefix.However,when I am saving the changes I made to URL prefix,system is redirecting me to "Varient Attributes" screen.I don't know what exactly this screen is about.Please help..
Regards,
Mandar.

Java Script for enhancing Web Template

Hi
I had a Java Script Error when trying to customize WEB Template
I had a Sales Fore Cast report in 3 different versions
Weekly View
Monthly View and
Quarterly View.
The Rows and Free Chars for all the 3 reports are same only the calculactions in the coulmns changes accordingly.
My requirment is when user selects the query in portal.The first screen would be 3 Radio Buttons
(User has to choose either Weekly r Monthly r Quarterly radio button) which takes to the revelevant results
As mention in the below How to do Doc
www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0e11be0-b925-2c10-7991-daf9122a9918
could you please update me the required JAVA Script
Thanks

please update

Precalcuting Data for a Web Template

Hi,
     I have a Web Template that I am precalculating and the template has a parameter setup in Reporting Agent Setting. The parameter was set up by basically copying the part of the Web Template URL that specifies the default variable values.
     This seems to work great. I submit the precalc job and the job finishes fine with a significant sized Job log.
     How can I tell if this created the precalc data for this template? I mean I know the job completed successfully, but iss there somewhere I can go to look to verify what has been precalced?
Thanks!

Thanks for the quick responses. I awarded points...
I should dig a little more in the documentation. Guess I'm used to the old school SAP documentation which never really contained any details. Their documentation on the web is better.
Anyway, I took the path of least resistance and it paid off...
Thanks again!
Message was edited by: Kenneth Murray

Training a ABC Data Mining (DM) model for a Web Template.

Hello All,
I need to create a Web Template that uses the ABC web item. This Web Item needs a "trained" ABC Analysis DM model. The only tool that I know of that can "train" a DM model is the APD. However the APD does not support the ABC DM as a data target. Is there any other way to "train" a ABC DM model ? Or are there gaps in my knowledge ?
Dorothy

Hi,
Being new to mining you have really set off on a ambitious mining project :)
Couple of technical pointers:
*1) Version of Data Miner being Used*
You are using the original Data Miner release.
I would download the latest SQL Dev release that contains the current Data Miner client and repository installation.
http://www.oracle.com/technetwork/developer-tools/sql-developer/downloads/index.html
SQL Developer 3.2.2 RTM Version 3.2.20.09 Build MAIN-09.87
Drop the old repository and start with this latest one, assuming you are just getting started and have no significant mining worklows created.
You can always export the workflows to disk if you want to import them to the repository.
Alternatively you can migrate the older repository, but I would avoid unless you really need to, as it requires Data Miner to hold on to some older repository definitions.
*2) Handling of text*
It seems your primary source of data for the clustering process will be the cs_uri_query.
You might find better results processing it as text data rather than as categorical data.
You can use the Build Text node to transform cs_uri_query into a nested column that contains text tokens.
*3) Methodology definition*
This is probably your biggest challenge really.
What is the overall methodology to produce the desired result.
You stated your objective is: develop an intelligent recommend model based on queries recorded in the web log
Once you create clusters from this data, what are your next steps?
What type of recommendation do you want to generate?
Thanks, Mark

Filling Cache for a Web Template

HI Folks,
We are in BI7.0. We have some reports which are taking huge amount of time to get executed. So we would like to fill the OLAP cache for these reports. I know the concept of pre calculating web templates in BW3.5. I am not sure, whether do we have to adopt the same concept here in BI7.0 or not?
Please let us know which process better suits our requirement in BI7.0 and provide the steps to perform it accordingly.
Any links, documents or PDFs on this topic are most welcome.
Many thanks.
regards,
SN

Hi,
Please have a look into the below article.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/f048c590-31a4-2c10-8599-bd01fabb93d4
Regards,
Raghavendra.

Illustrator and Photoshop for creating web banners?

My company for years has worked with print products. We recently started creating web banners. We use Illustrator for the layout for print and Photoshop for the layout of web products. I have artists who dont see the difference between the two. They want to continue to create web banners in Illustrator. Or they want to export the Illustrator file into Photoshop with the layers. But, to export it this way it has to be cmyk. ugghhh. Can somebody please give me valuable reasons on what application is best and why? Thank you very much!

>But, to export it this way it has to be cmyk.
Not true.
Illustrator is "best" for vector. Photoshop is "best" for raster.
I would let your artists work in whatever program they feel they produce the "best" art. You should be able to quickly and easily develop a workflow around their needs. If you cannot, then you have your answer too.
J

De-Facto instructions for Creating Web Templates, PLEASE

Similar Messages

Maybe you are looking for