De-installation of Solaris 10 Question
How do you de-install Solaris 10?
I installed it on my Dell Laptop last night that already had Windows XP. I was familiar with SuSe, so I did not think there would be any issues.
But....
1. I didn't get dual boot. It's Solaris 10 boot only.
2. None of the hardware was recognized, so I can't get on the internet or anything.
I am thinking that the best course of action is to remove Solaris. If anyone has the procedure for that, I would appreciate it. Also, if anyone has a fix for the two problems, I would appreciate it.
Thanks!
Most operating systems don't have an uninstall. You just install something else on top of it.
What model laptop do you have? I thought most dell NICs were supported?
There are several howtos out there for dual/triple boot machines with XP/Linux/Solaris on them.
Darren
Similar Messages
-
Wu-ftpd installable for solaris 10 and solaris 9
Hi,
I could see only "proftpd" is available http://www.sun.com/software/solaris/freeware
But I am looking for the "wu-ftpd" server which is compatable with Solaris 9 and Solaris 10.
Any one help me from where I can get the "wu-ftpd" installable for solaris 9 and solaris 10 sparc server.
thanks,
AmudhaHi Robert,
Thanks for your reply.
I too saw that the ftp version used in solaris 10 by default is wu-ftpd, but I am not sure about it, because when I tried to ftp to my solaris box the version it is started is not "FTP server (Version wu-2.6.2(5)".
I have got the wu-ftpd installable. But I could not get the proper document for configuring the same.
Question1: How to stop existing ftp service and start newly instlaled wu-ftpd in Solaris 9 and Solaris 10 servers?
Earlier solaris 8 version I change the ftpd version in /etc/inetd.conf file and give HUP signal to inetd then this new wu-ftpd version will be used.
Question 2: It always starts the system inbuilt ftp server and also I am getting ftp log in failure for any user which I add newly or even existing users.
could any one help to resolve these issues? Thanks in advance for your help.
Amdudha -
Problem with ana 3.6 Installation on solaris 10
Hi,
I'm going to install Cisco Ana 3.6.5 on Solaris 10 and this is my first experience.
here are the information about my installation:
OS: Solaris 10 64-bit
Oracle 10g 10.2.0.3
I have installed Oracle and now when i try to install ana gateway , i get this Error Message:
- sheer doesnt exist, creating in /export/home/oracle/oracle/product/10.2.0/db_1/oradata/sheer_DATA.dbf table space...
*** ERROR: Can not create table space /export/home/oracle/oracle/product/10.2.0/db_1/oradata/sheer_DATA.dbf. ABORTING. ***
could you please help me?
Thanks in advanceI've solved the problem by setting password for scheme sheer to cisco !
- Enter the Oracle sid: MCDB
- Enter the Oracle admin username: system
- Enter the Oracle admin password: ********
- Enter the password for the scheme sheer: cisco
- Enter the location of the data files: /export/home/oracle/product/db_10g/oradata
- Enter the Oracle Listener port: 1521 -
FYI....boot from SAN is required for physical server (T4-1) (not OVM).
1) How to Boot from SAN for T4-1 Server with Solaris 11.1 OS on the disk?
The SAN disks allocated are visible in ok prompt. below is the output.
(0) ok show—disks
a) /pci@400/pci@2/pci@0/pci@f/pci@0/usb@0, 2/hub@2/hub@3/storage@2/disk
b) /pci@400/pci@2/pci@0/pci€a/SUNW, ezalxs@0, l/fp@0, 0/disk
e) /pci@400/pci@2/pci@0/pci@a/SUNW, ealxs@0/fp@0, 0/disk
d) /pci@400/pci@2/pci@0/pci@8/SUNW, emlxs@0, l/fp@0, 0/disk
e) /pci@400/pci@2/pci@0/pci@8/SUNW,enlxs@0/fp@0,0/disk
f) /pci@400/pci@2/pci@0/pci@4/scsi@0/disk
g) /pci@400/pci@1/pci@0/pci@4/scsi@0/disk
h) /iscsi—hba/disk
q) NO SELECTION
valid choice: a. . .h, q to quit c
/pci@400/pci@2/pci@0/pci@a/SUNW, ealxs@0/fp@0, 0/disk has been selected.
Type “Y ( Control—Y ) to insert it in the command line.
e.g. ok nvalias mydev “Y
for creating devalias mydev for /pci@400/pci@2/pci@0/pci@a/SUNW,emlxs@0/fp@0,0/disk
(0) ok set—sfs—boot
set—sfs—boot ?
We tried selecting a disk and applying sfs-boot at ok prompt.
Can you please help me providing detailed pre-requesites/steps/procedure to implement this and to start boot from SAN.
2) How to SMI Label/Format a disk while OS Installation in Solaris 11.1?
As we know that ZFS is the default filesystem in Solaris 11.
We have seen in the Oracle documentation that for rpool below are recommended:
- A disk that is intended for a ZFS root pool must be created with an SMI label, not an EFI label.
- Create root pools with slices by using the s* identifier.
- ZFS applies an EFI label when you create a storage pool with whole disks.
- In general, you should create a disk slice with the bulk of disk space in slice 0.
I have seen the solution that using format -e, we change the labelling but all the data will be lost, whats the way to apply a SMI Label/Format on a rpool disks while OS Installation itself.
Please provide me the steps to SMI Label a disk while installaing Solaris 11.1 OS.Oracle recommends below things on rpool: (thats reason wanted to apply SMI Label)
I have seen in the Oracle documentation that for rpool below are recommended:
- A disk that is intended for a ZFS root pool must be created with an SMI label, not an EFI label.
- Create root pools with slices by using the s* identifier.
- ZFS applies an EFI label when you create a storage pool with whole disks.
- In general, you should create a disk slice with the bulk of disk space in slice 0. -
Installation error Solaris 10-u6-ga1
I must be missing something really obvious on the installation of Solaris 10 U6. I've come up against the error message upon manually partitioning, and using UFS. After the install the error is:
Solaris 10 10 software installation partially failed
Solaris 10 packages partially installed
SUNWlur
Then at reboot it loops and loops
If I install using ZFS no problem. Unfortunately I have to use UFS for this install.
I pulled down the sol-10-u6-x86-ga1 dvd and installed on an Vmware to see what I'd get. If I manually setup the drive, it fails to with the same error.
Here is my drive layout both sparc server and vmware(x86)
/ = 10 Gb
swap = 10 Gb
/etc = 10 Gb
/usr = 10 Gb
/var = 10 Gb
/export=remaining drive space.
I'm I missing something obvious?
thanks
billThere should be more information in the install log about why the one package failed. If you search for the package name in the log you should be able find it. Then that might help determine whether the package can be installed on its own, possibly fixing your reboot issue.
-- Alan -
How to Add a Physical Interface After Installation in Solaris 10
How to Add a Physical Interface After Installation in Solaris 10
Hi Java Specialist,
I am trying to setup a network interface with the following steps on a new fresh Solaris 10 installation using the instruction titled How to Add a Physical Interface After Installation in Solaris 10 3/05 ONLY from http://docs.oracle.com/cd/E19253-01/816-4554/esxhb/index.html:
1. # ifconfig lo0 plumb up
2. # ifconfig lo0 10.56.8.101 netmask 255.255.240.0. This was the working Windows DHCP environment prior to installing Solaris
10 on top of it.
3. # Added saturn to /etc/hostname.lo0.
4. # Added 10.56.8.101 to /etc/inet/hosts
5. # Added 10.56.0.0 255.255.240.0 to /etc/inet/netmasks
6.# reboot
However, the following errors kept recurring:
svcs –xv …. unable to qualify my own domain name,
failed with exit status 69.
Any idea on what other steps have I missed? I was hoping to only do step 3 – 6 for the change to apply permanently.
Many thanks,
JackHi Java Specialist,... in a Solaris forum?
1. # ifconfig lo0 plumb upThe loopback connection (your lo0)is NOT a physical interface. There are no hardware components for it. Nor can I think of any reason why it should ever be anything other than the default 127.0.0.1
Use your favorite Internet search site (such as Google, Bing, Yahoo) to learn more about it.
2. # ifconfig lo0 10.56.8.101 netmask 255.255.240.0. This was the working Windows DHCP environment ...I have no idea how a nonexistent software construct gets a DHCP address in a MS Operating System, unless you are confusing this with the "Microsoft Loopback Adapter" which is an utterly different concept. Again, go see what Google tells you.
<br>
<br>
<br>
... completely unrelated to configuring an IP...
unable to qualify my own domain nameAgain, search the Internet or even search these forums with that string of words.
Go back through your two most recent posts and read the responses again.
They seem to both be on the same topic as this new one -- configuring an IP on something.
How to initialize new IP address on secondary interface permanently
How to change IP address permanently on Solaris 10
When you've done all that, then come back and tell us what you are actually trying to do. -
Installation of Solaris 9 Intel Version in Windows XP PC
I am very much interested in installation of Solaris 9 intel version in my PC which is windows XP version.
My PC Processor : AMD Athlon
I am not able to install solaris 9 in my PC.
Sun boot version is Sun OS secondary boot version 3.0.
During installation,i am going untill selection of type of installation. After selecting the Interactive type,the system is rebooting again without installing.
Select the type of installation you want to perform
(1) Solaris Interactive
(2) Custom Jumpstart
After selecting from above,the system is rebooting again without installing.
Please help me with the installation.Try on HCL BigAdmins website to know if your hardware is supported
-
Installation of Solaris 9 intel version in windows XP
I am very much interested in installation of Solaris 9 intel version in my PC which is windows XP version.
My PC Processor : AMD Athlon
I am not able to install solaris 9 in my PC.
Sun boot version is Sun OS secondary boot version 3.0.
During installation,i am going untill selection of type of installation. After selecting the Interactive type,the system is rebooting again without installing.
Select the type of installation you want to perform
(1) Solaris Interactive
(2) Custom Jumpstart
After selecting from above,the system is rebooting again without installing.
Please help me with the installation.Are you trying to install Solaris 9 onto a server that is already running Windows XP and to keep Windows XP too?
You'll need to create a partition on which to install Solaris, - search for Solaris Windows Dual Boot on docs.sun.com for more information. -
Need Agent Installer for Solaris (SPARC)
Hi All,
I have downloaded Grid Control Agent Installer for Solaris from http://www.oracle.com/technology/software/products/oem/htdocs/agentsoft.html.
When I tried to extract the zip file, I am getting the following error message.
"Can not open file. It does not appear to be a valid archive. If you downloaded this file, try downloading the file again."
Even I tried using http://sac.us.oracle.com/download/index.html also but getting the same error.
Please send me the location if you have,
Thanks
SumathiMost commands are identical. Performance analysis, loading all are similar. Tape interaction, creation of tape devices is going to be pretty much the same.
The differences show up a lot at the hardware level. HBAs aren't usually the same, many drivers (and their quirks) are different between the architectures. If you're debugging connectivity to a tape library, those differences may be critical.
So you can't get as close as you may want, but I'll bet it would still be helpful.
Darren -
Access manager installation on solaris zone
Hi
I have installed the Access manager 7.0, Sun java system app server 8.1, Sun sirectory server 5.2 through JES installer on solaris 10 zone AM55-zone. Installer summarry is below, which shows installtion complete without error, but I am not able to launch the amserver login page.
Any suggestion, what I did wrong? any thoughts?
Sid
Installation Complete
Software installation has completed successfully. You can view the installation
summary and log by using the choices below. Summary and log files are available
in /var/sadm/install/logs/.
Your next step is to perform the postinstallation configuration and
verification tasks documented in the Postinstallation Configuration and Startup
Chapter of the Sun Java(TM) Enterprise System Installation Guide. See: http:
//docs.sun.com/doc/819-2328.
Enter 1 to view installation summary and Enter 2 to view installation logs
[1] {"!" exits} 1
Installation Summary Report
Install Summary
Java Enterprise System : Installed
Sun Java(TM) System Message Queue 3 2005Q4 Enterprise Edition : Installed
Sun Java(TM) System Application Server Enterprise Edition 8.1 2005Q4 : Installed
Sun Java(TM) System Directory Preparation Tool : Installed
Sun Java(TM) System Directory Server 5 2005Q4 : Installed
Sun Java(TM) System Access Manager 7 2005Q4 : Installed
Configuration Data
Sun Java(TM) System Application Server Enterprise Edition 8.1 2005Q4 :
Domains and Instance Configuration Directory : /var/opt/SUNWappserver
Application Server Installation Directory : /opt/SUNWappserver
Sun Java(TM) System Directory Preparation Tool :
Directory Preparation Tool Installation Directory : /opt/SUNWcomds
Sun Java(TM) System Directory Server 5 2005Q4 :
Directory Server Admin User : admin
Directory Server Manager : cn=Directory Manager
Directory Server Identifier : AM55-zone
Directory Server Port : 389
Directory Server Root Suffix : dc=ipsolutionshowcase,dc=com
<--[33%]--[ENTER To Continue]--[n To Finish]--> {"!" exits}
Directory Server Administration Domain : ipsolutionshowcase.com
System User : root
System Group : root
Existing Configuration Directory : 0
Configuration Directory Host : AM55-zone.ipsolutionshowcase.com
Configuration Directory Port : 389
Configuration Directory Admin User : admin
Existing User Directory : 0
User Directory Host : AM55-zone.ipsolutionshowcase.com
User Directory Port : 389
User Directory Admin User : admin
User Directory Suffix : dc=ipsolutionshowcase,dc=com
Disable Schema Checking : 0
Add Sample Entries : 0
Populate Database : 1
Sun Java(TM) System Access Manager 7 2005Q4 :
Access Manager Installation Directory : /opt
Access Manager Protocol : http
Access Manager Port : 8080
LDAP User ID : amldapuser
<--[66%]--[ENTER To Continue]--[n To Finish]--> {"!" exits}
Administrator User ID : amAdmin
Web Container : AppServer
Access Manager Application Server Installation Directory :
/opt/SUNWappserver/appserver
Document Root : /var/opt/SUNWappserver/domains/domain1/docroot
Access Manager Console Host (for Existing console) : AM55-zone.
ipsolutionshowcase.com
Access Manager Console Deploy URI : amconsole
Access Manager Password Deploy URI : ampassword
Access Manager Host : AM55-zone.ipsolutionshowcase.com
Access Manager Services Deploy URI : amserver
Access Manager Cookie Domain List : .ipsolutionshowcase.com
Access Manager Common Domain Deploy URI : amcommon
Access Manager Directory Server Host Name : AM55-zone
Access Manager Directory Server Host : AM55-zone.ipsolutionshowcase.com
Access Manager Directory Server Port : 389
Access Manager Directory Root Suffix : dc=ipsolutionshowcase,dc=com
Access Manager Directory Manager DN : cn=Directory Manager
Organization Marker Object Class : sunISManagedOrganization
User Marker Object Class : inetorgperson
Organization Naming Attribute : o
User Naming Attribute : uid
<--[100%]--[ENTER To Continue]--[n To Finish]--> {"!" exits}
Enter 1 to view installation summary and Enter 2 to view installation logs
[1] {"!" exits} !
You have new mail in /var/mail/root
bash-3.00#
bash-3.00# cd /var/opt/mps/serverroot/slapd-AM55-zone
bash-3.00# ./start-slapdThanks samk,
After the installation, I have started the Directory server,admin,and console with following commands:
bash-3.00# directoryserver start
bash-3.00# directoryserver start-admin
SunONE-WebServer-Enterprise/6.0SP3 B05/19/2004 02:48
warning: daemon is running as super-user
[LS ls1] http://AM55-zone.ipsolutionshowcase.com <http://AM55-zone.ipsolutionshowcase.com> , port 390 ready to accept requests
startup: server started successfully
bash-3.00# directoryserver startconsole
Recieved the Login console window,logged in and got the ipsolutionshowcase tree.
What are the next steps I need to folow in order to launch the Access Manager page?
Ant thoughts?
Thanks for ye help
Sid -
Unable to enter Agent name and port details while doing installation on Solaris, Installation wizard is moving slowly and at 'Specify Agent Details' page it is not allowing me to enter the details and now I am not able to continue installation.
Please let me know if I am missing anything and there is any solution.just in case cross verify the certiication matrix for 11.1.1.6
http://www.oracle.com/technetwork/middleware/data-integrator/odi-11gr1certmatrix-163773.xls
Thanks,
Saichand -
11gR2 installation on Solaris failed with prereuisite 124861-15
The 11gR2 installation on Solaris 10 sparc failed with prereuisite 124861-15.
When I tried to install the patch 124861-20, it failed with the following(see below):
I have Sun Studio 12-2 installed on the system.
It was complaining that some packages (SPROmrcom, SPROlangx, SPROlang,SPROsunms ) are not installed.
Where can I get these packages? Should not it be included in the Sun Studio 12-2 installation?
Thanks.
Zhigang
# patchadd 124861-20
Validating patches...
Loading patches installed on the system...
Cannot find package name, arch or version in pkginfo file /var/sadm/pkg/IR/pkginfo.
Done!
Loading patches requested to install.
Done!
The following requested patches have packages not installed on the system
Package SPROmrcom from directory SPROmrcom in patch 124861-20 is not installed on the system. Changes for package SPROmrcom will not be applied to the system.
Package SPROlangx from directory SPROlangx in patch 124861-20 is not installed on the system. Changes for package SPROlangx will not be applied to the system.
Package SPROlang from directory SPROlang in patch 124861-20 is not installed on the system. Changes for package SPROlang will not be applied to the system.
Package SPROsunms from directory SPROsunms in patch 124861-20 is not installed on the system. Changes for package SPROsunms will not be applied to the system.
Checking patches that you specified for installation.
Done!
The following requested patches will not be installed because
the packages they patch are not installed on this system.
0 No Packages from patch 124861-20 are installed on the system.Hi,
The 11gR2 installation on Solaris 10 sparc failed with prereuisite 124861-15.
When I tried to install the patch 124861-20, it failed with the following(see below):
I have Sun Studio 12-2 installed on the system.
It was complaining that some packages (SPROmrcom, SPROlangx, SPROlang,SPROsunms ) are not installed.
Where can I get these packages? Should not it be included in the Sun Studio 12-2 installation?
Thanks.
Zhigang
# patchadd 124861-20
Validating patches...
Loading patches installed on the system...
Cannot find package name, arch or version in pkginfo file /var/sadm/pkg/IR/pkginfo.
Done!
Loading patches requested to install.
Done!
The following requested patches have packages not installed on the system
Package SPROmrcom from directory SPROmrcom in patch 124861-20 is not installed on the system. Changes for package SPROmrcom will not be applied to the system.
Package SPROlangx from directory SPROlangx in patch 124861-20 is not installed on the system. Changes for package SPROlangx will not be applied to the system.
Package SPROlang from directory SPROlang in patch 124861-20 is not installed on the system. Changes for package SPROlang will not be applied to the system.
Package SPROsunms from directory SPROsunms in patch 124861-20 is not installed on the system. Changes for package SPROsunms will not be applied to the system.
Checking patches that you specified for installation.
Done!
The following requested patches will not be installed because
the packages they patch are not installed on this system.
0 No Packages from patch 124861-20 are installed on the system.
Refer my post *11gR2 Installation Error with patch 124861-15 as pre Req*
http://appsdbaworkshop.blogspot.com/2010/11/11gr2-installation-error-with-patch.html
thanks,
X A H E E R -
BS 2005 SR3 Installation Master Solaris on x64 64bit
Hi,
According to the SAP's Product Availability Matrix, DB2 is a supported database for installing SAP Netweaver 7.0, however when using the sapinst in BS 2005 SR3 Installation Master Solaris on x64 64bit, there is no option to select DB2 as the database.
Does anyone know if there is a workaround or another Installation Master that we can use for this?Hi Setu,
Which DB2 version are you using ?
If it is DB2 V9.5 then check SAP Note 1089578 - DB6: Using DB2 Version 9.5 with SAP Software
Thanks
Sunny -
Installation problems (Solaris 10 3/05 release, on x86 system)
Late last year, i recieved a Solaris 10 installation DVD case, containing the intallation DVDs for SPARC and x86 systems.
after finally getting another hard drive (the other was too full), i tried booting the computer off the x86 disc, to install.
it went to the light grey screen where it asks for installation mode, i chose default interactive installation (option 1).
this is where the problem starts. It appears that before beginning the interactive installer, it gathers information about the computer (such as USB ports, 100mb/s connection, etc)
I have read this process should only take a few seconds.
BUT, after 2 hours, it appears to have locked up after displaying "Skipping RTSL 0"
(it may not be rtsl, but something similar, and it was after detecting the 100mb/s connection)
My question is: how do i get it to work so i can install Solaris, without having to wait those 2 hours that should only be a few seconds?
thx to those who answer, thanx
(ps: i have had no previous experience with solaris)errm...
I do not know what TRS-80, VIC-20, or E10K mean, but i can try give you the hardware config (ps i'm installing solaris as a secondary OS in another
partition to XP, on the second HD (so there are 2 Hard drives in the computer).
WARNING: LIST VERY LONG AND POSSIBLY NOT WHAT YOU MEANT FOR ME TO POST (well.. i dont really know how to get HW configs, and what ones you require)
Omega technology ATX
Intel Celeron CPU 1.30 GHz, 512 MB RAM
From XP device manager:
Computer:
ACPI PC
Disk Drives:
ST340810A (partitioned into: C, F, G, and X which will be removed for C soon)
MDT MD400AB-00BVA0 (partitioned into D, and E)
the MDT is the new HD, and partition D will be used for solaris OS and extra space for stuff done in solaris).
Display adapters:
RADEON 9550
RADEON 9550 secondary
DVD/CD-ROM drives:
LG DVD-rom DRD8160B
Lite-on DVDRW SOHW-1673s
Standard floppy disk drive and controller
IDE ATA/ATAPI controllers:
Primary IDE Channel
Secondary IDE Channel
VIA bus master IDE controller
Easy internet keyboard
PS/2 mouse
soft V92 smart speakerphone modem
Monitors: LG 900B
Network adapters:
Surecom EP-320X-R 100/10/M PCI Adapter
Ports (COM & LPT):
COM 1 & COM2
printer port (LPT1)
Processors:
Intel Celeron CPU 1300MHz
Sound, video and game controllers:
Audio Codecs
Legacy Audio Drivers
Legacy Video Capture Devices
Media control Devices
Standard Game port
Unimodem Half-Duplex Audio Device
VIA AC'97 Audio Controller (WDM)
Video Codecs
System Devices:
ACPI fixed feature button
direct memory access controller
ISAPNP read data port
Microcode Update Device
Microsoft ACPI-compliant system
Microsoft system management BIOS driver
motherboard resources
Numeric data processor
PCI bus
Plug and play software device enumerator
programmable interrupt controller
system board
System CMOS/real time clock
System speaker
system timer
VIA CPU to AGP controller
VIA Tech CPU to PCI bridge
VIA Tech PCI to ISA bridge
VIA Tech power management controller
USB controllers:
NEC PCI to USB open host controller
NEC PCI to USB open host controller
standard enhanced PCI to USB host controller
USB root hub
USB root hub
USB root hub
USB root hub
USB root hub
VIA rev 5 or later USB universal host controller
VIA rev 5 or later USB universal host controller
well.. there we go. i hope thats what you wanted :)
thx for replying though. -
Installation of Solaris 10 on AMD Athlon processor
hi,
I am trying to install Solaris 10 version on AMD processor(X86 platform). I am using DVD for installation. I am able to complete installation untill system indentification & initialization. After that i am getting problem at the Solaris Install process.
I am stuck at Solaris Install Window.
These are the messages i am having in Solaris Install Window.
Preparing system for Solaris Install
Configuring disk ( c0d0 )
- creating fdisk partition table
- creating solaris disk label ( VTOC )
- processing the alternate sector slice
Creating X86boot partition
- creating file system on fdisk partition c0d0p1
Creating & checking UFS file systems
- creating / ( c0d0s0 )
Error : File system failed for / ( c0d0s0 )
Error : could not check or create system critical file system
Error : could not update disks with new configuration
mkdir : "/a/var/sadm/launcher" : read only file system
could not update disks with new configuration
After this,nothing is happening....
Can you please somebody help me in this regard.
I am very thankfull to you people....
boot version 4.02
egarly waiting for your help....
Thanks very much
with regards
kalyanI've had the same problem when trying to install it, in my case the disklabel was created with parted and caused the problems. I've relabeld the disk by booting into single user mode from cdrom and executing these commands:
# dd if=/dev/zero of=/dev/rdsk/c0t0d0s0 bs=1024 count=20
# format
(select the disk ('0') and 'label' it)
(verify the label and quit)
# reboot
(installation questions)
Preparing system for Solaris install
Configuring disk (c0t0d0)
- Creating Solaris disk label (VTOC)
Creating and checking UFS file systems
- Creating / (c0t0d0s0)
- Creating /var (c0t0d0s1)
- Creating /usr (c0t0d0s6)
[...]
Maybe you are looking for
-
Ok, i'm ready to tackle this flicker problem once and for all...
ok, so when it comes to dealing with old analogue video, i always have a problem of glitchy flickery video.... it only happens when there is actual movement introduced while recording to tape (to quarantine the problem, i bought a brand new tape for
-
How to use my apple id on iphone
hi sir i have apple id problem ,so how to make free id and how to use apple id on iphone i don,t know please can you tell me? thank you
-
How do I move a file from Icloud to my hard drive?
How do I move a file from Icloud to my hard drive?
-
Payment run error:Only clear down payment requests individually :DEFTAX 012
Hi , In the payment run, I get the error as "Only clear down payment requests individually" The error code is DEFTAX 012 . What is the reason and solution. It seems to be a downpayment. Please suggest the needful. Regards Rudra
-
Can Someone help with SQL for update ?
Hi, can someone help me with this code 2 tables. table 1 = User_master table 2 = update_users I need to update user_master like so... update user_master set status = 'I' where user_id IN () problem is I have to over 10k user_id to update. So created